updater/blockimg.cpp

/*
 * Copyright (C) 2014 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <ctype.h>
#include <errno.h>
#include <dirent.h>
#include <fcntl.h>
#include <linux/fs.h>
#include <pthread.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <sys/ioctl.h>
#include <time.h>
#include <unistd.h>
#include <fec/io.h>

#include <memory>
#include <string>
#include <unordered_map>
#include <vector>

#include <android-base/logging.h>
#include <android-base/parseint.h>
#include <android-base/strings.h>
#include <android-base/unique_fd.h>
#include <applypatch/applypatch.h>
#include <openssl/sha.h>
#include <ziparchive/zip_archive.h>

#include "edify/expr.h"
#include "error_code.h"
#include "updater/install.h"
#include "ota_io.h"
#include "print_sha1.h"
#include "updater/updater.h"

// Set this to 0 to interpret 'erase' transfers to mean do a
// BLKDISCARD ioctl (the normal behavior).  Set to 1 to interpret
// erase to mean fill the region with zeroes.
#define DEBUG_ERASE  0

static constexpr size_t BLOCKSIZE = 4096;
static constexpr const char* STASH_DIRECTORY_BASE = "/cache/recovery";
static constexpr mode_t STASH_DIRECTORY_MODE = 0700;
static constexpr mode_t STASH_FILE_MODE = 0600;

struct RangeSet {
  size_t count;  // Limit is INT_MAX.
  size_t size;
  std::vector<size_t> pos;  // Actual limit is INT_MAX.

  // Get the block number for the ith(starting from 0) block in the range set.
  int get_block(size_t idx) const {
    if (idx >= size) {
      LOG(ERROR) << "index: " << idx << " is greater than range set size: " << size;
      return -1;
    }
    for (size_t i = 0; i < pos.size(); i += 2) {
      if (idx < pos[i + 1] - pos[i]) {
        return pos[i] + idx;
      }
      idx -= (pos[i + 1] - pos[i]);
    }
    return -1;
  }
};

static CauseCode failure_type = kNoCause;
static bool is_retry = false;
static std::unordered_map<std::string, RangeSet> stash_map;

static RangeSet parse_range(const std::string& range_text) {
  RangeSet rs;

  std::vector<std::string> pieces = android::base::Split(range_text, ",");
  if (pieces.size() < 3) {
    goto err;
  }

  size_t num;
  if (!android::base::ParseUint(pieces[0], &num, static_cast<size_t>(INT_MAX))) {
    goto err;
  }

  if (num == 0 || num % 2) {
    goto err;  // must be even
  } else if (num != pieces.size() - 1) {
    goto err;
  }

  rs.pos.resize(num);
  rs.count = num / 2;
  rs.size = 0;

  for (size_t i = 0; i < num; i += 2) {
    if (!android::base::ParseUint(pieces[i + 1], &rs.pos[i], static_cast<size_t>(INT_MAX))) {
      goto err;
    }

    if (!android::base::ParseUint(pieces[i + 2], &rs.pos[i + 1], static_cast<size_t>(INT_MAX))) {
      goto err;
    }

    if (rs.pos[i] >= rs.pos[i + 1]) {
      goto err;  // empty or negative range
    }

    size_t sz = rs.pos[i + 1] - rs.pos[i];
    if (rs.size > SIZE_MAX - sz) {
      goto err;  // overflow
    }

    rs.size += sz;
  }

  return rs;

err:
  LOG(ERROR) << "failed to parse range '" << range_text << "'";
  exit(EXIT_FAILURE);
}

static bool range_overlaps(const RangeSet& r1, const RangeSet& r2) {
  for (size_t i = 0; i < r1.count; ++i) {
    size_t r1_0 = r1.pos[i * 2];
    size_t r1_1 = r1.pos[i * 2 + 1];

    for (size_t j = 0; j < r2.count; ++j) {
      size_t r2_0 = r2.pos[j * 2];
      size_t r2_1 = r2.pos[j * 2 + 1];

      if (!(r2_0 >= r1_1 || r1_0 >= r2_1)) {
        return true;
      }
    }
  }

  return false;
}

static int read_all(int fd, uint8_t* data, size_t size) {
    size_t so_far = 0;
    while (so_far < size) {
        ssize_t r = TEMP_FAILURE_RETRY(ota_read(fd, data+so_far, size-so_far));
        if (r == -1) {
            failure_type = kFreadFailure;
            PLOG(ERROR) << "read failed";
            return -1;
        } else if (r == 0) {
            failure_type = kFreadFailure;
            LOG(ERROR) << "read reached unexpected EOF.";
            return -1;
        }
        so_far += r;
    }
    return 0;
}

static int read_all(int fd, std::vector<uint8_t>& buffer, size_t size) {
    return read_all(fd, buffer.data(), size);
}

static int write_all(int fd, const uint8_t* data, size_t size) {
    size_t written = 0;
    while (written < size) {
        ssize_t w = TEMP_FAILURE_RETRY(ota_write(fd, data+written, size-written));
        if (w == -1) {
            failure_type = kFwriteFailure;
            PLOG(ERROR) << "write failed";
            return -1;
        }
        written += w;
    }

    return 0;
}

static int write_all(int fd, const std::vector<uint8_t>& buffer, size_t size) {
    return write_all(fd, buffer.data(), size);
}

static bool discard_blocks(int fd, off64_t offset, uint64_t size) {
    // Don't discard blocks unless the update is a retry run.
    if (!is_retry) {
        return true;
    }

    uint64_t args[2] = {static_cast<uint64_t>(offset), size};
    int status = ioctl(fd, BLKDISCARD, &args);
    if (status == -1) {
        PLOG(ERROR) << "BLKDISCARD ioctl failed";
        return false;
    }
    return true;
}

static bool check_lseek(int fd, off64_t offset, int whence) {
    off64_t rc = TEMP_FAILURE_RETRY(lseek64(fd, offset, whence));
    if (rc == -1) {
        failure_type = kLseekFailure;
        PLOG(ERROR) << "lseek64 failed";
        return false;
    }
    return true;
}

static void allocate(size_t size, std::vector<uint8_t>& buffer) {
    // if the buffer's big enough, reuse it.
    if (size <= buffer.size()) return;

    buffer.resize(size);
}

struct RangeSinkState {
    explicit RangeSinkState(RangeSet& rs) : tgt(rs) { };

    int fd;
    const RangeSet& tgt;
    size_t p_block;
    size_t p_remain;
};

static ssize_t RangeSinkWrite(const uint8_t* data, ssize_t size, void* token) {
    RangeSinkState* rss = reinterpret_cast<RangeSinkState*>(token);

    if (rss->p_remain == 0) {
        LOG(ERROR) << "range sink write overrun";
        return 0;
    }

    ssize_t written = 0;
    while (size > 0) {
        size_t write_now = size;

        if (rss->p_remain < write_now) {
            write_now = rss->p_remain;
        }

        if (write_all(rss->fd, data, write_now) == -1) {
            break;
        }

        data += write_now;
        size -= write_now;

        rss->p_remain -= write_now;
        written += write_now;

        if (rss->p_remain == 0) {
            // move to the next block
            ++rss->p_block;
            if (rss->p_block < rss->tgt.count) {
                rss->p_remain = (rss->tgt.pos[rss->p_block * 2 + 1] -
                                 rss->tgt.pos[rss->p_block * 2]) * BLOCKSIZE;

                off64_t offset = static_cast<off64_t>(rss->tgt.pos[rss->p_block*2]) * BLOCKSIZE;
                if (!discard_blocks(rss->fd, offset, rss->p_remain)) {
                    break;
                }

                if (!check_lseek(rss->fd, offset, SEEK_SET)) {
                    break;
                }

            } else {
                // we can't write any more; return how many bytes have
                // been written so far.
                break;
            }
        }
    }

    return written;
}

// All of the data for all the 'new' transfers is contained in one
// file in the update package, concatenated together in the order in
// which transfers.list will need it.  We want to stream it out of the
// archive (it's compressed) without writing it to a temp file, but we
// can't write each section until it's that transfer's turn to go.
//
// To achieve this, we expand the new data from the archive in a
// background thread, and block that threads 'receive uncompressed
// data' function until the main thread has reached a point where we
// want some new data to be written.  We signal the background thread
// with the destination for the data and block the main thread,
// waiting for the background thread to complete writing that section.
// Then it signals the main thread to wake up and goes back to
// blocking waiting for a transfer.
//
// NewThreadInfo is the struct used to pass information back and forth
// between the two threads.  When the main thread wants some data
// written, it sets rss to the destination location and signals the
// condition.  When the background thread is done writing, it clears
// rss and signals the condition again.

struct NewThreadInfo {
    ZipArchiveHandle za;
    ZipEntry entry;

    RangeSinkState* rss;

    pthread_mutex_t mu;
    pthread_cond_t cv;
};

static bool receive_new_data(const uint8_t* data, size_t size, void* cookie) {
    NewThreadInfo* nti = reinterpret_cast<NewThreadInfo*>(cookie);

    while (size > 0) {
        // Wait for nti->rss to be non-null, indicating some of this
        // data is wanted.
        pthread_mutex_lock(&nti->mu);
        while (nti->rss == nullptr) {
            pthread_cond_wait(&nti->cv, &nti->mu);
        }
        pthread_mutex_unlock(&nti->mu);

        // At this point nti->rss is set, and we own it.  The main
        // thread is waiting for it to disappear from nti.
        ssize_t written = RangeSinkWrite(data, size, nti->rss);
        data += written;
        size -= written;

        if (nti->rss->p_block == nti->rss->tgt.count) {
            // we have written all the bytes desired by this rss.

            pthread_mutex_lock(&nti->mu);
            nti->rss = nullptr;
            pthread_cond_broadcast(&nti->cv);
            pthread_mutex_unlock(&nti->mu);
        }
    }

    return true;
}

static void* unzip_new_data(void* cookie) {
    NewThreadInfo* nti = (NewThreadInfo*) cookie;
    ProcessZipEntryContents(nti->za, &nti->entry, receive_new_data, nti);
    return nullptr;
}

static int ReadBlocks(const RangeSet& src, std::vector<uint8_t>& buffer, int fd) {
    size_t p = 0;
    uint8_t* data = buffer.data();

    for (size_t i = 0; i < src.count; ++i) {
        if (!check_lseek(fd, (off64_t) src.pos[i * 2] * BLOCKSIZE, SEEK_SET)) {
            return -1;
        }

        size_t size = (src.pos[i * 2 + 1] - src.pos[i * 2]) * BLOCKSIZE;

        if (read_all(fd, data + p, size) == -1) {
            return -1;
        }

        p += size;
    }

    return 0;
}

static int WriteBlocks(const RangeSet& tgt, const std::vector<uint8_t>& buffer, int fd) {
    const uint8_t* data = buffer.data();

    size_t p = 0;
    for (size_t i = 0; i < tgt.count; ++i) {
        off64_t offset = static_cast<off64_t>(tgt.pos[i * 2]) * BLOCKSIZE;
        size_t size = (tgt.pos[i * 2 + 1] - tgt.pos[i * 2]) * BLOCKSIZE;
        if (!discard_blocks(fd, offset, size)) {
            return -1;
        }

        if (!check_lseek(fd, offset, SEEK_SET)) {
            return -1;
        }

        if (write_all(fd, data + p, size) == -1) {
            return -1;
        }

        p += size;
    }

    return 0;
}

// Parameters for transfer list command functions
struct CommandParameters {
    std::vector<std::string> tokens;
    size_t cpos;
    const char* cmdname;
    const char* cmdline;
    std::string freestash;
    std::string stashbase;
    bool canwrite;
    int createdstash;
    android::base::unique_fd fd;
    bool foundwrites;
    bool isunresumable;
    int version;
    size_t written;
    size_t stashed;
    NewThreadInfo nti;
    pthread_t thread;
    std::vector<uint8_t> buffer;
    uint8_t* patch_start;
};

// Do a source/target load for move/bsdiff/imgdiff in version 1.
// We expect to parse the remainder of the parameter tokens as:
//
//    <src_range> <tgt_range>
//
// The source range is loaded into the provided buffer, reallocating
// it to make it larger if necessary.

static int LoadSrcTgtVersion1(CommandParameters& params, RangeSet& tgt, size_t& src_blocks,
        std::vector<uint8_t>& buffer, int fd) {

    if (params.cpos + 1 >= params.tokens.size()) {
        LOG(ERROR) << "invalid parameters";
        return -1;
    }

    // <src_range>
    RangeSet src = parse_range(params.tokens[params.cpos++]);

    // <tgt_range>
    tgt = parse_range(params.tokens[params.cpos++]);

    allocate(src.size * BLOCKSIZE, buffer);
    int rc = ReadBlocks(src, buffer, fd);
    src_blocks = src.size;

    return rc;
}

// Print the hash in hex for corrupted source blocks (excluding the stashed blocks which is
// handled separately).
static void PrintHashForCorruptedSourceBlocks(const CommandParameters& params,
                                              const std::vector<uint8_t>& buffer) {
  LOG(INFO) << "unexpected contents of source blocks in cmd:\n" << params.cmdline;
  if (params.version < 3) {
    // TODO handle version 1,2
    LOG(WARNING) << "version number " << params.version << " is not supported to print hashes";
    return;
  }

  CHECK(params.tokens[0] == "move" || params.tokens[0] == "bsdiff" ||
        params.tokens[0] == "imgdiff");

  size_t pos = 0;
  // Command example:
  // move <onehash> <tgt_range> <src_blk_count> <src_range> [<loc_range> <stashed_blocks>]
  // bsdiff <offset> <len> <src_hash> <tgt_hash> <tgt_range> <src_blk_count> <src_range>
  //        [<loc_range> <stashed_blocks>]
  if (params.tokens[0] == "move") {
    // src_range for move starts at the 4th position.
    if (params.tokens.size() < 5) {
      LOG(ERROR) << "failed to parse source range in cmd:\n" << params.cmdline;
      return;
    }
    pos = 4;
  } else {
    // src_range for diff starts at the 7th position.
    if (params.tokens.size() < 8) {
      LOG(ERROR) << "failed to parse source range in cmd:\n" << params.cmdline;
      return;
    }
    pos = 7;
  }

  // Source blocks in stash only, no work to do.
  if (params.tokens[pos] == "-") {
    return;
  }

  RangeSet src = parse_range(params.tokens[pos++]);

  RangeSet locs;
  // If there's no stashed blocks, content in the buffer is consecutive and has the same
  // order as the source blocks.
  if (pos == params.tokens.size()) {
    locs.count = 1;
    locs.size = src.size;
    locs.pos = { 0, src.size };
  } else {
    // Otherwise, the next token is the offset of the source blocks in the target range.
    // Example: for the tokens <4,63946,63947,63948,63979> <4,6,7,8,39> <stashed_blocks>;
    // We want to print SHA-1 for the data in buffer[6], buffer[8], buffer[9] ... buffer[38];
    // this corresponds to the 32 src blocks #63946, #63948, #63949 ... #63978.
    locs = parse_range(params.tokens[pos++]);
    CHECK_EQ(src.size, locs.size);
    CHECK_EQ(locs.pos.size() % 2, static_cast<size_t>(0));
  }

  LOG(INFO) << "printing hash in hex for " << src.size << " source blocks";
  for (size_t i = 0; i < src.size; i++) {
    int block_num = src.get_block(i);
    CHECK_NE(block_num, -1);
    int buffer_index = locs.get_block(i);
    CHECK_NE(buffer_index, -1);
    CHECK_LE((buffer_index + 1) * BLOCKSIZE, buffer.size());

    uint8_t digest[SHA_DIGEST_LENGTH];
    SHA1(buffer.data() + buffer_index * BLOCKSIZE, BLOCKSIZE, digest);
    std::string hexdigest = print_sha1(digest);
    LOG(INFO) << "  block number: " << block_num << ", SHA-1: " << hexdigest;
  }
}

// If the calculated hash for the whole stash doesn't match the stash id, print the SHA-1
// in hex for each block.
static void PrintHashForCorruptedStashedBlocks(const std::string& id,
                                               const std::vector<uint8_t>& buffer,
                                               const RangeSet& src) {
  LOG(INFO) << "printing hash in hex for stash_id: " << id;
  CHECK_EQ(src.size * BLOCKSIZE, buffer.size());

  for (size_t i = 0; i < src.size; i++) {
    int block_num = src.get_block(i);
    CHECK_NE(block_num, -1);

    uint8_t digest[SHA_DIGEST_LENGTH];
    SHA1(buffer.data() + i * BLOCKSIZE, BLOCKSIZE, digest);
    std::string hexdigest = print_sha1(digest);
    LOG(INFO) << "  block number: " << block_num << ", SHA-1: " << hexdigest;
  }
}

// If the stash file doesn't exist, read the source blocks this stash contains and print the
// SHA-1 for these blocks.
static void PrintHashForMissingStashedBlocks(const std::string& id, int fd) {
  if (stash_map.find(id) == stash_map.end()) {
    LOG(ERROR) << "No stash saved for id: " << id;
    return;
  }

  LOG(INFO) << "print hash in hex for source blocks in missing stash: " << id;
  const RangeSet& src = stash_map[id];
  std::vector<uint8_t> buffer(src.size * BLOCKSIZE);
  if (ReadBlocks(src, buffer, fd) == -1) {
      LOG(ERROR) << "failed to read source blocks for stash: " << id;
      return;
  }
  PrintHashForCorruptedStashedBlocks(id, buffer, src);
}

static int VerifyBlocks(const std::string& expected, const std::vector<uint8_t>& buffer,
        const size_t blocks, bool printerror) {
    uint8_t digest[SHA_DIGEST_LENGTH];
    const uint8_t* data = buffer.data();

    SHA1(data, blocks * BLOCKSIZE, digest);

    std::string hexdigest = print_sha1(digest);

    if (hexdigest != expected) {
        if (printerror) {
            LOG(ERROR) << "failed to verify blocks (expected " << expected << ", read "
                       << hexdigest << ")";
        }
        return -1;
    }

    return 0;
}

static std::string GetStashFileName(const std::string& base, const std::string& id,
        const std::string& postfix) {
    if (base.empty()) {
        return "";
    }

    std::string fn(STASH_DIRECTORY_BASE);
    fn += "/" + base + "/" + id + postfix;

    return fn;
}

typedef void (*StashCallback)(const std::string&, void*);

// Does a best effort enumeration of stash files. Ignores possible non-file
// items in the stash directory and continues despite of errors. Calls the
// 'callback' function for each file and passes 'data' to the function as a
// parameter.

static void EnumerateStash(const std::string& dirname, StashCallback callback, void* data) {
    if (dirname.empty() || callback == nullptr) {
        return;
    }

    std::unique_ptr<DIR, int(*)(DIR*)> directory(opendir(dirname.c_str()), closedir);

    if (directory == nullptr) {
        if (errno != ENOENT) {
            PLOG(ERROR) << "opendir \"" << dirname << "\" failed";
        }
        return;
    }

    struct dirent* item;
    while ((item = readdir(directory.get())) != nullptr) {
        if (item->d_type != DT_REG) {
            continue;
        }

        std::string fn = dirname + "/" + std::string(item->d_name);
        callback(fn, data);
    }
}

static void UpdateFileSize(const std::string& fn, void* data) {
  if (fn.empty() || !data) {
    return;
  }

  struct stat sb;
  if (stat(fn.c_str(), &sb) == -1) {
    PLOG(ERROR) << "stat \"" << fn << "\" failed";
    return;
  }

  size_t* size = static_cast<size_t*>(data);
  *size += sb.st_size;
}

// Deletes the stash directory and all files in it. Assumes that it only
// contains files. There is nothing we can do about unlikely, but possible
// errors, so they are merely logged.

static void DeleteFile(const std::string& fn, void* /* data */) {
    if (!fn.empty()) {
        LOG(INFO) << "deleting " << fn;

        if (unlink(fn.c_str()) == -1 && errno != ENOENT) {
            PLOG(ERROR) << "unlink \"" << fn << "\" failed";
        }
    }
}

static void DeletePartial(const std::string& fn, void* data) {
    if (android::base::EndsWith(fn, ".partial")) {
        DeleteFile(fn, data);
    }
}

static void DeleteStash(const std::string& base) {
    if (base.empty()) {
        return;
    }

    LOG(INFO) << "deleting stash " << base;

    std::string dirname = GetStashFileName(base, "", "");
    EnumerateStash(dirname, DeleteFile, nullptr);

    if (rmdir(dirname.c_str()) == -1) {
        if (errno != ENOENT && errno != ENOTDIR) {
            PLOG(ERROR) << "rmdir \"" << dirname << "\" failed";
        }
    }
}

static int LoadStash(CommandParameters& params, const std::string& base, const std::string& id,
        bool verify, size_t* blocks, std::vector<uint8_t>& buffer, bool printnoent) {
    // In verify mode, if source range_set was saved for the given hash,
    // check contents in the source blocks first. If the check fails,
    // search for the stashed files on /cache as usual.
    if (!params.canwrite) {
        if (stash_map.find(id) != stash_map.end()) {
            const RangeSet& src = stash_map[id];
            allocate(src.size * BLOCKSIZE, buffer);

            if (ReadBlocks(src, buffer, params.fd) == -1) {
                LOG(ERROR) << "failed to read source blocks in stash map.";
                return -1;
            }
            if (VerifyBlocks(id, buffer, src.size, true) != 0) {
                LOG(ERROR) << "failed to verify loaded source blocks in stash map.";
                PrintHashForCorruptedStashedBlocks(id, buffer, src);
                return -1;
            }
            return 0;
        }
    }

    if (base.empty()) {
        return -1;
    }

    size_t blockcount = 0;

    if (!blocks) {
        blocks = &blockcount;
    }

    std::string fn = GetStashFileName(base, id, "");

    struct stat sb;
    int res = stat(fn.c_str(), &sb);

    if (res == -1) {
        if (errno != ENOENT || printnoent) {
            PLOG(ERROR) << "stat \"" << fn << "\" failed";
            PrintHashForMissingStashedBlocks(id, params.fd);
        }
        return -1;
    }

    LOG(INFO) << " loading " << fn;

    if ((sb.st_size % BLOCKSIZE) != 0) {
        LOG(ERROR) << fn << " size " << sb.st_size << " not multiple of block size " << BLOCKSIZE;
        return -1;
    }

    android::base::unique_fd fd(TEMP_FAILURE_RETRY(ota_open(fn.c_str(), O_RDONLY)));
    if (fd == -1) {
        PLOG(ERROR) << "open \"" << fn << "\" failed";
        return -1;
    }

    allocate(sb.st_size, buffer);

    if (read_all(fd, buffer, sb.st_size) == -1) {
        return -1;
    }

    *blocks = sb.st_size / BLOCKSIZE;

    if (verify && VerifyBlocks(id, buffer, *blocks, true) != 0) {
        LOG(ERROR) << "unexpected contents in " << fn;
        if (stash_map.find(id) == stash_map.end()) {
            LOG(ERROR) << "failed to find source blocks number for stash " << id
                       << " when executing command: " << params.cmdname;
        } else {
            const RangeSet& src = stash_map[id];
            PrintHashForCorruptedStashedBlocks(id, buffer, src);
        }
        DeleteFile(fn, nullptr);
        return -1;
    }

    return 0;
}

static int WriteStash(const std::string& base, const std::string& id, int blocks,
        std::vector<uint8_t>& buffer, bool checkspace, bool *exists) {
    if (base.empty()) {
        return -1;
    }

    if (checkspace && CacheSizeCheck(blocks * BLOCKSIZE) != 0) {
        LOG(ERROR) << "not enough space to write stash";
        return -1;
    }

    std::string fn = GetStashFileName(base, id, ".partial");
    std::string cn = GetStashFileName(base, id, "");

    if (exists) {
        struct stat sb;
        int res = stat(cn.c_str(), &sb);

        if (res == 0) {
            // The file already exists and since the name is the hash of the contents,
            // it's safe to assume the contents are identical (accidental hash collisions
            // are unlikely)
            LOG(INFO) << " skipping " << blocks << " existing blocks in " << cn;
            *exists = true;
            return 0;
        }

        *exists = false;
    }

    LOG(INFO) << " writing " << blocks << " blocks to " << cn;

    android::base::unique_fd fd(
        TEMP_FAILURE_RETRY(ota_open(fn.c_str(), O_WRONLY | O_CREAT | O_TRUNC, STASH_FILE_MODE)));
    if (fd == -1) {
        PLOG(ERROR) << "failed to create \"" << fn << "\"";
        return -1;
    }

    if (write_all(fd, buffer, blocks * BLOCKSIZE) == -1) {
        return -1;
    }

    if (ota_fsync(fd) == -1) {
        failure_type = kFsyncFailure;
        PLOG(ERROR) << "fsync \"" << fn << "\" failed";
        return -1;
    }

    if (rename(fn.c_str(), cn.c_str()) == -1) {
        PLOG(ERROR) << "rename(\"" << fn << "\", \"" << cn << "\") failed";
        return -1;
    }

    std::string dname = GetStashFileName(base, "", "");
    android::base::unique_fd dfd(TEMP_FAILURE_RETRY(ota_open(dname.c_str(),
                                                             O_RDONLY | O_DIRECTORY)));
    if (dfd == -1) {
        failure_type = kFileOpenFailure;
        PLOG(ERROR) << "failed to open \"" << dname << "\" failed";
        return -1;
    }

    if (ota_fsync(dfd) == -1) {
        failure_type = kFsyncFailure;
        PLOG(ERROR) << "fsync \"" << dname << "\" failed";
        return -1;
    }

    return 0;
}

// Creates a directory for storing stash files and checks if the /cache partition
// hash enough space for the expected amount of blocks we need to store. Returns
// >0 if we created the directory, zero if it existed already, and <0 of failure.

static int CreateStash(State* state, size_t maxblocks, const std::string& blockdev,
                       std::string& base) {
  if (blockdev.empty()) {
    return -1;
  }

  // Stash directory should be different for each partition to avoid conflicts
  // when updating multiple partitions at the same time, so we use the hash of
  // the block device name as the base directory
  uint8_t digest[SHA_DIGEST_LENGTH];
  SHA1(reinterpret_cast<const uint8_t*>(blockdev.data()), blockdev.size(), digest);
  base = print_sha1(digest);

  std::string dirname = GetStashFileName(base, "", "");
  struct stat sb;
  int res = stat(dirname.c_str(), &sb);
  size_t max_stash_size = maxblocks * BLOCKSIZE;

  if (res == -1 && errno != ENOENT) {
    ErrorAbort(state, kStashCreationFailure, "stat \"%s\" failed: %s\n", dirname.c_str(),
               strerror(errno));
    return -1;
  } else if (res != 0) {
    LOG(INFO) << "creating stash " << dirname;
    res = mkdir(dirname.c_str(), STASH_DIRECTORY_MODE);

    if (res != 0) {
      ErrorAbort(state, kStashCreationFailure, "mkdir \"%s\" failed: %s\n", dirname.c_str(),
                 strerror(errno));
      return -1;
    }

    if (CacheSizeCheck(max_stash_size) != 0) {
      ErrorAbort(state, kStashCreationFailure, "not enough space for stash (%zu needed)\n",
                 max_stash_size);
      return -1;
    }

    return 1;  // Created directory
  }

  LOG(INFO) << "using existing stash " << dirname;

  // If the directory already exists, calculate the space already allocated to
  // stash files and check if there's enough for all required blocks. Delete any
  // partially completed stash files first.

  EnumerateStash(dirname, DeletePartial, nullptr);
  size_t existing = 0;
  EnumerateStash(dirname, UpdateFileSize, &existing);

  if (max_stash_size > existing) {
    size_t needed = max_stash_size - existing;
    if (CacheSizeCheck(needed) != 0) {
      ErrorAbort(state, kStashCreationFailure, "not enough space for stash (%zu more needed)\n",
                 needed);
      return -1;
    }
  }

  return 0;  // Using existing directory
}

static int SaveStash(CommandParameters& params, const std::string& base,
        std::vector<uint8_t>& buffer, int fd, bool usehash) {

    // <stash_id> <src_range>
    if (params.cpos + 1 >= params.tokens.size()) {
        LOG(ERROR) << "missing id and/or src range fields in stash command";
        return -1;
    }
    const std::string& id = params.tokens[params.cpos++];

    size_t blocks = 0;
    if (usehash && LoadStash(params, base, id, true, &blocks, buffer, false) == 0) {
        // Stash file already exists and has expected contents. Do not
        // read from source again, as the source may have been already
        // overwritten during a previous attempt.
        return 0;
    }

    RangeSet src = parse_range(params.tokens[params.cpos++]);

    allocate(src.size * BLOCKSIZE, buffer);
    if (ReadBlocks(src, buffer, fd) == -1) {
        return -1;
    }
    blocks = src.size;
    stash_map[id] = src;

    if (usehash && VerifyBlocks(id, buffer, blocks, true) != 0) {
        // Source blocks have unexpected contents. If we actually need this
        // data later, this is an unrecoverable error. However, the command
        // that uses the data may have already completed previously, so the
        // possible failure will occur during source block verification.
        LOG(ERROR) << "failed to load source blocks for stash " << id;
        return 0;
    }

    // In verify mode, we don't need to stash any blocks.
    if (!params.canwrite && usehash) {
        return 0;
    }

    LOG(INFO) << "stashing " << blocks << " blocks to " << id;
    params.stashed += blocks;
    return WriteStash(base, id, blocks, buffer, false, nullptr);
}

static int FreeStash(const std::string& base, const std::string& id) {
    if (base.empty() || id.empty()) {
        return -1;
    }

    std::string fn = GetStashFileName(base, id, "");
    DeleteFile(fn, nullptr);

    return 0;
}

static void MoveRange(std::vector<uint8_t>& dest, const RangeSet& locs,
        const std::vector<uint8_t>& source) {
    // source contains packed data, which we want to move to the
    // locations given in locs in the dest buffer.  source and dest
    // may be the same buffer.

    const uint8_t* from = source.data();
    uint8_t* to = dest.data();
    size_t start = locs.size;
    for (int i = locs.count-1; i >= 0; --i) {
        size_t blocks = locs.pos[i*2+1] - locs.pos[i*2];
        start -= blocks;
        memmove(to + (locs.pos[i*2] * BLOCKSIZE), from + (start * BLOCKSIZE),
                blocks * BLOCKSIZE);
    }
}

// Do a source/target load for move/bsdiff/imgdiff in version 2.
// We expect to parse the remainder of the parameter tokens as one of:
//
//    <tgt_range> <src_block_count> <src_range>
//        (loads data from source image only)
//
//    <tgt_range> <src_block_count> - <[stash_id:stash_range] ...>
//        (loads data from stashes only)
//
//    <tgt_range> <src_block_count> <src_range> <src_loc> <[stash_id:stash_range] ...>
//        (loads data from both source image and stashes)
//
// On return, buffer is filled with the loaded source data (rearranged
// and combined with stashed data as necessary).  buffer may be
// reallocated if needed to accommodate the source data.  *tgt is the
// target RangeSet.  Any stashes required are loaded using LoadStash.

static int LoadSrcTgtVersion2(CommandParameters& params, RangeSet& tgt, size_t& src_blocks,
        std::vector<uint8_t>& buffer, int fd, const std::string& stashbase, bool* overlap) {

    // At least it needs to provide three parameters: <tgt_range>,
    // <src_block_count> and "-"/<src_range>.
    if (params.cpos + 2 >= params.tokens.size()) {
        LOG(ERROR) << "invalid parameters";
        return -1;
    }

    // <tgt_range>
    tgt = parse_range(params.tokens[params.cpos++]);

    // <src_block_count>
    const std::string& token = params.tokens[params.cpos++];
    if (!android::base::ParseUint(token.c_str(), &src_blocks)) {
        LOG(ERROR) << "invalid src_block_count \"" << token << "\"";
        return -1;
    }

    allocate(src_blocks * BLOCKSIZE, buffer);

    // "-" or <src_range> [<src_loc>]
    if (params.tokens[params.cpos] == "-") {
        // no source ranges, only stashes
        params.cpos++;
    } else {
        RangeSet src = parse_range(params.tokens[params.cpos++]);
        int res = ReadBlocks(src, buffer, fd);

        if (overlap) {
            *overlap = range_overlaps(src, tgt);
        }

        if (res == -1) {
            return -1;
        }

        if (params.cpos >= params.tokens.size()) {
            // no stashes, only source range
            return 0;
        }

        RangeSet locs = parse_range(params.tokens[params.cpos++]);
        MoveRange(buffer, locs, buffer);
    }

    // <[stash_id:stash_range]>
    while (params.cpos < params.tokens.size()) {
        // Each word is a an index into the stash table, a colon, and
        // then a rangeset describing where in the source block that
        // stashed data should go.
        std::vector<std::string> tokens = android::base::Split(params.tokens[params.cpos++], ":");
        if (tokens.size() != 2) {
            LOG(ERROR) << "invalid parameter";
            return -1;
        }

        std::vector<uint8_t> stash;
        int res = LoadStash(params, stashbase, tokens[0], false, nullptr, stash, true);

        if (res == -1) {
            // These source blocks will fail verification if used later, but we
            // will let the caller decide if this is a fatal failure
            LOG(ERROR) << "failed to load stash " << tokens[0];
            continue;
        }

        RangeSet locs = parse_range(tokens[1]);

        MoveRange(buffer, locs, stash);
    }

    return 0;
}

// Do a source/target load for move/bsdiff/imgdiff in version 3.
//
// Parameters are the same as for LoadSrcTgtVersion2, except for 'onehash', which
// tells the function whether to expect separate source and targe block hashes, or
// if they are both the same and only one hash should be expected, and
// 'isunresumable', which receives a non-zero value if block verification fails in
// a way that the update cannot be resumed anymore.
//
// If the function is unable to load the necessary blocks or their contents don't
// match the hashes, the return value is -1 and the command should be aborted.
//
// If the return value is 1, the command has already been completed according to
// the contents of the target blocks, and should not be performed again.
//
// If the return value is 0, source blocks have expected content and the command
// can be performed.

static int LoadSrcTgtVersion3(CommandParameters& params, RangeSet& tgt, size_t& src_blocks,
        bool onehash, bool& overlap) {

    if (params.cpos >= params.tokens.size()) {
        LOG(ERROR) << "missing source hash";
        return -1;
    }

    std::string srchash = params.tokens[params.cpos++];
    std::string tgthash;

    if (onehash) {
        tgthash = srchash;
    } else {
        if (params.cpos >= params.tokens.size()) {
            LOG(ERROR) << "missing target hash";
            return -1;
        }
        tgthash = params.tokens[params.cpos++];
    }

    if (LoadSrcTgtVersion2(params, tgt, src_blocks, params.buffer, params.fd,
                           params.stashbase, &overlap) == -1) {
        return -1;
    }

    std::vector<uint8_t> tgtbuffer(tgt.size * BLOCKSIZE);

    if (ReadBlocks(tgt, tgtbuffer, params.fd) == -1) {
        return -1;
    }

    if (VerifyBlocks(tgthash, tgtbuffer, tgt.size, false) == 0) {
        // Target blocks already have expected content, command should be skipped
        return 1;
    }

    if (VerifyBlocks(srchash, params.buffer, src_blocks, true) == 0) {
        // If source and target blocks overlap, stash the source blocks so we can
        // resume from possible write errors. In verify mode, we can skip stashing
        // because the source blocks won't be overwritten.
        if (overlap && params.canwrite) {
            LOG(INFO) << "stashing " << src_blocks << " overlapping blocks to " << srchash;

            bool stash_exists = false;
            if (WriteStash(params.stashbase, srchash, src_blocks, params.buffer, true,
                           &stash_exists) != 0) {
                LOG(ERROR) << "failed to stash overlapping source blocks";
                return -1;
            }

            params.stashed += src_blocks;
            // Can be deleted when the write has completed
            if (!stash_exists) {
                params.freestash = srchash;
            }
        }

        // Source blocks have expected content, command can proceed
        return 0;
    }

    if (overlap && LoadStash(params, params.stashbase, srchash, true, nullptr, params.buffer,
                             true) == 0) {
        // Overlapping source blocks were previously stashed, command can proceed.
        // We are recovering from an interrupted command, so we don't know if the
        // stash can safely be deleted after this command.
        return 0;
    }

    // Valid source data not available, update cannot be resumed
    LOG(ERROR) << "partition has unexpected contents";
    PrintHashForCorruptedSourceBlocks(params, params.buffer);

    params.isunresumable = true;

    return -1;
}

static int PerformCommandMove(CommandParameters& params) {
    size_t blocks = 0;
    bool overlap = false;
    int status = 0;
    RangeSet tgt;

    if (params.version == 1) {
        status = LoadSrcTgtVersion1(params, tgt, blocks, params.buffer, params.fd);
    } else if (params.version == 2) {
        status = LoadSrcTgtVersion2(params, tgt, blocks, params.buffer, params.fd,
                params.stashbase, nullptr);
    } else if (params.version >= 3) {
        status = LoadSrcTgtVersion3(params, tgt, blocks, true, overlap);
    }

    if (status == -1) {
        LOG(ERROR) << "failed to read blocks for move";
        return -1;
    }

    if (status == 0) {
        params.foundwrites = true;
    } else if (params.foundwrites) {
        LOG(WARNING) << "warning: commands executed out of order [" << params.cmdname << "]";
    }

    if (params.canwrite) {
        if (status == 0) {
            LOG(INFO) << "  moving " << blocks << " blocks";

            if (WriteBlocks(tgt, params.buffer, params.fd) == -1) {
                return -1;
            }
        } else {
            LOG(INFO) << "skipping " << blocks << " already moved blocks";
        }

    }

    if (!params.freestash.empty()) {
        FreeStash(params.stashbase, params.freestash);
        params.freestash.clear();
    }

    params.written += tgt.size;

    return 0;
}

static int PerformCommandStash(CommandParameters& params) {
    return SaveStash(params, params.stashbase, params.buffer, params.fd,
            (params.version >= 3));
}

static int PerformCommandFree(CommandParameters& params) {
    // <stash_id>
    if (params.cpos >= params.tokens.size()) {
        LOG(ERROR) << "missing stash id in free command";
        return -1;
    }

    const std::string& id = params.tokens[params.cpos++];

    if (stash_map.find(id) != stash_map.end()) {
        stash_map.erase(id);
        return 0;
    }

    if (params.createdstash || params.canwrite) {
        return FreeStash(params.stashbase, id);
    }

    return 0;
}

static int PerformCommandZero(CommandParameters& params) {

    if (params.cpos >= params.tokens.size()) {
        LOG(ERROR) << "missing target blocks for zero";
        return -1;
    }

    RangeSet tgt = parse_range(params.tokens[params.cpos++]);

    LOG(INFO) << "  zeroing " << tgt.size << " blocks";

    allocate(BLOCKSIZE, params.buffer);
    memset(params.buffer.data(), 0, BLOCKSIZE);

    if (params.canwrite) {
        for (size_t i = 0; i < tgt.count; ++i) {
            off64_t offset = static_cast<off64_t>(tgt.pos[i * 2]) * BLOCKSIZE;
            size_t size = (tgt.pos[i * 2 + 1] - tgt.pos[i * 2]) * BLOCKSIZE;
            if (!discard_blocks(params.fd, offset, size)) {
                return -1;
            }

            if (!check_lseek(params.fd, offset, SEEK_SET)) {
                return -1;
            }

            for (size_t j = tgt.pos[i * 2]; j < tgt.pos[i * 2 + 1]; ++j) {
                if (write_all(params.fd, params.buffer, BLOCKSIZE) == -1) {
                    return -1;
                }
            }
        }
    }

    if (params.cmdname[0] == 'z') {
        // Update only for the zero command, as the erase command will call
        // this if DEBUG_ERASE is defined.
        params.written += tgt.size;
    }

    return 0;
}

static int PerformCommandNew(CommandParameters& params) {

    if (params.cpos >= params.tokens.size()) {
        LOG(ERROR) << "missing target blocks for new";
        return -1;
    }

    RangeSet tgt = parse_range(params.tokens[params.cpos++]);

    if (params.canwrite) {
        LOG(INFO) << " writing " << tgt.size << " blocks of new data";

        RangeSinkState rss(tgt);
        rss.fd = params.fd;
        rss.p_block = 0;
        rss.p_remain = (tgt.pos[1] - tgt.pos[0]) * BLOCKSIZE;

        off64_t offset = static_cast<off64_t>(tgt.pos[0]) * BLOCKSIZE;
        if (!discard_blocks(params.fd, offset, tgt.size * BLOCKSIZE)) {
            return -1;
        }

        if (!check_lseek(params.fd, offset, SEEK_SET)) {
            return -1;
        }

        pthread_mutex_lock(&params.nti.mu);
        params.nti.rss = &rss;
        pthread_cond_broadcast(&params.nti.cv);

        while (params.nti.rss) {
            pthread_cond_wait(&params.nti.cv, &params.nti.mu);
        }

        pthread_mutex_unlock(&params.nti.mu);
    }

    params.written += tgt.size;

    return 0;
}

static int PerformCommandDiff(CommandParameters& params) {

    // <offset> <length>
    if (params.cpos + 1 >= params.tokens.size()) {
        LOG(ERROR) << "missing patch offset or length for " << params.cmdname;
        return -1;
    }

    size_t offset;
    if (!android::base::ParseUint(params.tokens[params.cpos++].c_str(), &offset)) {
        LOG(ERROR) << "invalid patch offset";
        return -1;
    }

    size_t len;
    if (!android::base::ParseUint(params.tokens[params.cpos++].c_str(), &len)) {
        LOG(ERROR) << "invalid patch len";
        return -1;
    }

    RangeSet tgt;
    size_t blocks = 0;
    bool overlap = false;
    int status = 0;
    if (params.version == 1) {
        status = LoadSrcTgtVersion1(params, tgt, blocks, params.buffer, params.fd);
    } else if (params.version == 2) {
        status = LoadSrcTgtVersion2(params, tgt, blocks, params.buffer, params.fd,
                params.stashbase, nullptr);
    } else if (params.version >= 3) {
        status = LoadSrcTgtVersion3(params, tgt, blocks, false, overlap);
    }

    if (status == -1) {
        LOG(ERROR) << "failed to read blocks for diff";
        return -1;
    }

    if (status == 0) {
        params.foundwrites = true;
    } else if (params.foundwrites) {
        LOG(WARNING) << "warning: commands executed out of order [" << params.cmdname << "]";
    }

    if (params.canwrite) {
        if (status == 0) {
            LOG(INFO) << "patching " << blocks << " blocks to " << tgt.size;

            Value patch_value(VAL_BLOB,
                    std::string(reinterpret_cast<const char*>(params.patch_start + offset), len));

            RangeSinkState rss(tgt);
            rss.fd = params.fd;
            rss.p_block = 0;
            rss.p_remain = (tgt.pos[1] - tgt.pos[0]) * BLOCKSIZE;

            off64_t offset = static_cast<off64_t>(tgt.pos[0]) * BLOCKSIZE;
            if (!discard_blocks(params.fd, offset, rss.p_remain)) {
                return -1;
            }

            if (!check_lseek(params.fd, offset, SEEK_SET)) {
                return -1;
            }

            if (params.cmdname[0] == 'i') {      // imgdiff
                if (ApplyImagePatch(params.buffer.data(), blocks * BLOCKSIZE, &patch_value,
                        &RangeSinkWrite, &rss, nullptr, nullptr) != 0) {
                    LOG(ERROR) << "Failed to apply image patch.";
                    return -1;
                }
            } else {
                if (ApplyBSDiffPatch(params.buffer.data(), blocks * BLOCKSIZE, &patch_value,
                        0, &RangeSinkWrite, &rss, nullptr) != 0) {
                    LOG(ERROR) << "Failed to apply bsdiff patch.";
                    return -1;
                }
            }

            // We expect the output of the patcher to fill the tgt ranges exactly.
            if (rss.p_block != tgt.count || rss.p_remain != 0) {
                LOG(ERROR) << "range sink underrun?";
            }
        } else {
            LOG(INFO) << "skipping " << blocks << " blocks already patched to " << tgt.size
                      << " [" << params.cmdline << "]";
        }
    }

    if (!params.freestash.empty()) {
        FreeStash(params.stashbase, params.freestash);
        params.freestash.clear();
    }

    params.written += tgt.size;

    return 0;
}

static int PerformCommandErase(CommandParameters& params) {
    if (DEBUG_ERASE) {
        return PerformCommandZero(params);
    }

    struct stat sb;
    if (fstat(params.fd, &sb) == -1) {
        PLOG(ERROR) << "failed to fstat device to erase";
        return -1;
    }

    if (!S_ISBLK(sb.st_mode)) {
        LOG(ERROR) << "not a block device; skipping erase";
        return -1;
    }

    if (params.cpos >= params.tokens.size()) {
        LOG(ERROR) << "missing target blocks for erase";
        return -1;
    }

    RangeSet tgt = parse_range(params.tokens[params.cpos++]);

    if (params.canwrite) {
        LOG(INFO) << " erasing " << tgt.size << " blocks";

        for (size_t i = 0; i < tgt.count; ++i) {
            uint64_t blocks[2];
            // offset in bytes
            blocks[0] = tgt.pos[i * 2] * (uint64_t) BLOCKSIZE;
            // length in bytes
            blocks[1] = (tgt.pos[i * 2 + 1] - tgt.pos[i * 2]) * (uint64_t) BLOCKSIZE;

            if (ioctl(params.fd, BLKDISCARD, &blocks) == -1) {
                PLOG(ERROR) << "BLKDISCARD ioctl failed";
                return -1;
            }
        }
    }

    return 0;
}

// Definitions for transfer list command functions
typedef int (*CommandFunction)(CommandParameters&);

struct Command {
    const char* name;
    CommandFunction f;
};

// args:
//    - block device (or file) to modify in-place
//    - transfer list (blob)
//    - new data stream (filename within package.zip)
//    - patch stream (filename within package.zip, must be uncompressed)

static Value* PerformBlockImageUpdate(const char* name, State* state, int /* argc */, Expr* argv[],
        const Command* commands, size_t cmdcount, bool dryrun) {
    CommandParameters params = {};
    params.canwrite = !dryrun;

    LOG(INFO) << "performing " << (dryrun ? "verification" : "update");
    if (state->is_retry) {
        is_retry = true;
        LOG(INFO) << "This update is a retry.";
    }

    std::vector<std::unique_ptr<Value>> args;
    if (!ReadValueArgs(state, 4, argv, &args)) {
        return nullptr;
    }

    const Value* blockdev_filename = args[0].get();
    const Value* transfer_list_value = args[1].get();
    const Value* new_data_fn = args[2].get();
    const Value* patch_data_fn = args[3].get();

    if (blockdev_filename->type != VAL_STRING) {
        ErrorAbort(state, kArgsParsingFailure, "blockdev_filename argument to %s must be string",
                   name);
        return StringValue("");
    }
    if (transfer_list_value->type != VAL_BLOB) {
        ErrorAbort(state, kArgsParsingFailure, "transfer_list argument to %s must be blob", name);
        return StringValue("");
    }
    if (new_data_fn->type != VAL_STRING) {
        ErrorAbort(state, kArgsParsingFailure, "new_data_fn argument to %s must be string", name);
        return StringValue("");
    }
    if (patch_data_fn->type != VAL_STRING) {
        ErrorAbort(state, kArgsParsingFailure, "patch_data_fn argument to %s must be string",
                   name);
        return StringValue("");
    }

    UpdaterInfo* ui = static_cast<UpdaterInfo*>(state->cookie);
    if (ui == nullptr) {
        return StringValue("");
    }

    FILE* cmd_pipe = ui->cmd_pipe;
    ZipArchiveHandle za = ui->package_zip;

    if (cmd_pipe == nullptr || za == nullptr) {
        return StringValue("");
    }

    ZipString path_data(patch_data_fn->data.c_str());
    ZipEntry patch_entry;
    if (FindEntry(za, path_data, &patch_entry) != 0) {
        LOG(ERROR) << name << "(): no file \"" << patch_data_fn->data << "\" in package";
        return StringValue("");
    }

    params.patch_start = ui->package_zip_addr + patch_entry.offset;
    ZipString new_data(new_data_fn->data.c_str());
    ZipEntry new_entry;
    if (FindEntry(za, new_data, &new_entry) != 0) {
        LOG(ERROR) << name << "(): no file \"" << new_data_fn->data << "\" in package";
        return StringValue("");
    }

    params.fd.reset(TEMP_FAILURE_RETRY(ota_open(blockdev_filename->data.c_str(), O_RDWR)));
    if (params.fd == -1) {
        PLOG(ERROR) << "open \"" << blockdev_filename->data << "\" failed";
        return StringValue("");
    }

    if (params.canwrite) {
        params.nti.za = za;
        params.nti.entry = new_entry;

        pthread_mutex_init(&params.nti.mu, nullptr);
        pthread_cond_init(&params.nti.cv, nullptr);
        pthread_attr_t attr;
        pthread_attr_init(&attr);
        pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE);

        int error = pthread_create(&params.thread, &attr, unzip_new_data, &params.nti);
        if (error != 0) {
            PLOG(ERROR) << "pthread_create failed";
            return StringValue("");
        }
    }

    std::vector<std::string> lines = android::base::Split(transfer_list_value->data, "\n");
    if (lines.size() < 2) {
        ErrorAbort(state, kArgsParsingFailure, "too few lines in the transfer list [%zd]\n",
                   lines.size());
        return StringValue("");
    }

    // First line in transfer list is the version number
    if (!android::base::ParseInt(lines[0], &params.version, 1, 4)) {
        LOG(ERROR) << "unexpected transfer list version [" << lines[0] << "]";
        return StringValue("");
    }

    LOG(INFO) << "blockimg version is " << params.version;

    // Second line in transfer list is the total number of blocks we expect to write
    size_t total_blocks;
    if (!android::base::ParseUint(lines[1], &total_blocks)) {
        ErrorAbort(state, kArgsParsingFailure, "unexpected block count [%s]\n", lines[1].c_str());
        return StringValue("");
    }

    if (total_blocks == 0) {
        return StringValue("t");
    }

    size_t start = 2;
    if (params.version >= 2) {
        if (lines.size() < 4) {
          ErrorAbort(state, kArgsParsingFailure, "too few lines in the transfer list [%zu]\n",
                     lines.size());
          return StringValue("");
        }

        // Third line is how many stash entries are needed simultaneously
        LOG(INFO) << "maximum stash entries " << lines[2];

        // Fourth line is the maximum number of blocks that will be stashed simultaneously
        size_t stash_max_blocks;
        if (!android::base::ParseUint(lines[3], &stash_max_blocks)) {
            ErrorAbort(state, kArgsParsingFailure, "unexpected maximum stash blocks [%s]\n",
                       lines[3].c_str());
            return StringValue("");
        }

        int res = CreateStash(state, stash_max_blocks, blockdev_filename->data, params.stashbase);
        if (res == -1) {
            return StringValue("");
        }

        params.createdstash = res;

        start += 2;
    }

    // Build a map of the available commands
    std::unordered_map<std::string, const Command*> cmd_map;
    for (size_t i = 0; i < cmdcount; ++i) {
        if (cmd_map.find(commands[i].name) != cmd_map.end()) {
            LOG(ERROR) << "Error: command [" << commands[i].name
                       << "] already exists in the cmd map.";
            return StringValue(strdup(""));
        }
        cmd_map[commands[i].name] = &commands[i];
    }

    int rc = -1;

    // Subsequent lines are all individual transfer commands
    for (auto it = lines.cbegin() + start; it != lines.cend(); it++) {
        const std::string& line(*it);
        if (line.empty()) continue;

        params.tokens = android::base::Split(line, " ");
        params.cpos = 0;
        params.cmdname = params.tokens[params.cpos++].c_str();
        params.cmdline = line.c_str();

        if (cmd_map.find(params.cmdname) == cmd_map.end()) {
            LOG(ERROR) << "unexpected command [" << params.cmdname << "]";
            goto pbiudone;
        }

        const Command* cmd = cmd_map[params.cmdname];

        if (cmd->f != nullptr && cmd->f(params) == -1) {
            LOG(ERROR) << "failed to execute command [" << line << "]";
            goto pbiudone;
        }

        if (params.canwrite) {
            if (ota_fsync(params.fd) == -1) {
                failure_type = kFsyncFailure;
                PLOG(ERROR) << "fsync failed";
                goto pbiudone;
            }
            fprintf(cmd_pipe, "set_progress %.4f\n",
                    static_cast<double>(params.written) / total_blocks);
            fflush(cmd_pipe);
        }
    }

    if (params.canwrite) {
        pthread_join(params.thread, nullptr);

        LOG(INFO) << "wrote " << params.written << " blocks; expected " << total_blocks;
        LOG(INFO) << "stashed " << params.stashed << " blocks";
        LOG(INFO) << "max alloc needed was " << params.buffer.size();

        const char* partition = strrchr(blockdev_filename->data.c_str(), '/');
        if (partition != nullptr && *(partition + 1) != 0) {
            fprintf(cmd_pipe, "log bytes_written_%s: %zu\n", partition + 1,
                    params.written * BLOCKSIZE);
            fprintf(cmd_pipe, "log bytes_stashed_%s: %zu\n", partition + 1,
                    params.stashed * BLOCKSIZE);
            fflush(cmd_pipe);
        }
        // Delete stash only after successfully completing the update, as it
        // may contain blocks needed to complete the update later.
        DeleteStash(params.stashbase);
    } else {
        LOG(INFO) << "verified partition contents; update may be resumed";
    }

    rc = 0;

pbiudone:
    if (ota_fsync(params.fd) == -1) {
        failure_type = kFsyncFailure;
        PLOG(ERROR) << "fsync failed";
    }
    // params.fd will be automatically closed because it's a unique_fd.

    // Only delete the stash if the update cannot be resumed, or it's
    // a verification run and we created the stash.
    if (params.isunresumable || (!params.canwrite && params.createdstash)) {
        DeleteStash(params.stashbase);
    }

    if (failure_type != kNoCause && state->cause_code == kNoCause) {
        state->cause_code = failure_type;
    }

    return StringValue(rc == 0 ? "t" : "");
}

// The transfer list is a text file containing commands to
// transfer data from one place to another on the target
// partition.  We parse it and execute the commands in order:
//
//    zero [rangeset]
//      - fill the indicated blocks with zeros
//
//    new [rangeset]
//      - fill the blocks with data read from the new_data file
//
//    erase [rangeset]
//      - mark the given blocks as empty
//
//    move <...>
//    bsdiff <patchstart> <patchlen> <...>
//    imgdiff <patchstart> <patchlen> <...>
//      - read the source blocks, apply a patch (or not in the
//        case of move), write result to target blocks.  bsdiff or
//        imgdiff specifies the type of patch; move means no patch
//        at all.
//
//        The format of <...> differs between versions 1 and 2;
//        see the LoadSrcTgtVersion{1,2}() functions for a
//        description of what's expected.
//
//    stash <stash_id> <src_range>
//      - (version 2+ only) load the given source range and stash
//        the data in the given slot of the stash table.
//
//    free <stash_id>
//      - (version 3+ only) free the given stash data.
//
// The creator of the transfer list will guarantee that no block
// is read (ie, used as the source for a patch or move) after it
// has been written.
//
// In version 2, the creator will guarantee that a given stash is
// loaded (with a stash command) before it's used in a
// move/bsdiff/imgdiff command.
//
// Within one command the source and target ranges may overlap so
// in general we need to read the entire source into memory before
// writing anything to the target blocks.
//
// All the patch data is concatenated into one patch_data file in
// the update package.  It must be stored uncompressed because we
// memory-map it in directly from the archive.  (Since patches are
// already compressed, we lose very little by not compressing
// their concatenation.)
//
// In version 3, commands that read data from the partition (i.e.
// move/bsdiff/imgdiff/stash) have one or more additional hashes
// before the range parameters, which are used to check if the
// command has already been completed and verify the integrity of
// the source data.

Value* BlockImageVerifyFn(const char* name, State* state, int argc, Expr* argv[]) {
    // Commands which are not tested are set to nullptr to skip them completely
    const Command commands[] = {
        { "bsdiff",     PerformCommandDiff  },
        { "erase",      nullptr             },
        { "free",       PerformCommandFree  },
        { "imgdiff",    PerformCommandDiff  },
        { "move",       PerformCommandMove  },
        { "new",        nullptr             },
        { "stash",      PerformCommandStash },
        { "zero",       nullptr             }
    };

    // Perform a dry run without writing to test if an update can proceed
    return PerformBlockImageUpdate(name, state, argc, argv, commands,
                sizeof(commands) / sizeof(commands[0]), true);
}

Value* BlockImageUpdateFn(const char* name, State* state, int argc, Expr* argv[]) {
    const Command commands[] = {
        { "bsdiff",     PerformCommandDiff  },
        { "erase",      PerformCommandErase },
        { "free",       PerformCommandFree  },
        { "imgdiff",    PerformCommandDiff  },
        { "move",       PerformCommandMove  },
        { "new",        PerformCommandNew   },
        { "stash",      PerformCommandStash },
        { "zero",       PerformCommandZero  }
    };

    return PerformBlockImageUpdate(name, state, argc, argv, commands,
                sizeof(commands) / sizeof(commands[0]), false);
}

Value* RangeSha1Fn(const char* name, State* state, int /* argc */, Expr* argv[]) {
    std::vector<std::unique_ptr<Value>> args;
    if (!ReadValueArgs(state, 2, argv, &args)) {
        return nullptr;
    }

    const Value* blockdev_filename = args[0].get();
    const Value* ranges = args[1].get();

    if (blockdev_filename->type != VAL_STRING) {
        ErrorAbort(state, kArgsParsingFailure, "blockdev_filename argument to %s must be string",
                   name);
        return StringValue("");
    }
    if (ranges->type != VAL_STRING) {
        ErrorAbort(state, kArgsParsingFailure, "ranges argument to %s must be string", name);
        return StringValue("");
    }

    android::base::unique_fd fd(ota_open(blockdev_filename->data.c_str(), O_RDWR));
    if (fd == -1) {
        ErrorAbort(state, kFileOpenFailure, "open \"%s\" failed: %s",
                   blockdev_filename->data.c_str(), strerror(errno));
        return StringValue("");
    }

    RangeSet rs = parse_range(ranges->data);

    SHA_CTX ctx;
    SHA1_Init(&ctx);

    std::vector<uint8_t> buffer(BLOCKSIZE);
    for (size_t i = 0; i < rs.count; ++i) {
        if (!check_lseek(fd, (off64_t)rs.pos[i*2] * BLOCKSIZE, SEEK_SET)) {
            ErrorAbort(state, kLseekFailure, "failed to seek %s: %s",
                       blockdev_filename->data.c_str(), strerror(errno));
            return StringValue("");
        }

        for (size_t j = rs.pos[i*2]; j < rs.pos[i*2+1]; ++j) {
            if (read_all(fd, buffer, BLOCKSIZE) == -1) {
                ErrorAbort(state, kFreadFailure, "failed to read %s: %s",
                           blockdev_filename->data.c_str(), strerror(errno));
                return StringValue("");
            }

            SHA1_Update(&ctx, buffer.data(), BLOCKSIZE);
        }
    }
    uint8_t digest[SHA_DIGEST_LENGTH];
    SHA1_Final(digest, &ctx);

    return StringValue(print_sha1(digest));
}

// This function checks if a device has been remounted R/W prior to an incremental
// OTA update. This is an common cause of update abortion. The function reads the
// 1st block of each partition and check for mounting time/count. It return string "t"
// if executes successfully and an empty string otherwise.

Value* CheckFirstBlockFn(const char* name, State* state, int argc, Expr* argv[]) {
    std::vector<std::unique_ptr<Value>> args;
    if (!ReadValueArgs(state, 1, argv, &args)) {
        return nullptr;
    }

    const Value* arg_filename = args[0].get();

    if (arg_filename->type != VAL_STRING) {
        ErrorAbort(state, kArgsParsingFailure, "filename argument to %s must be string", name);
        return StringValue("");
    }

    android::base::unique_fd fd(ota_open(arg_filename->data.c_str(), O_RDONLY));
    if (fd == -1) {
        ErrorAbort(state, kFileOpenFailure, "open \"%s\" failed: %s", arg_filename->data.c_str(),
                   strerror(errno));
        return StringValue("");
    }

    RangeSet blk0 {1 /*count*/, 1/*size*/, std::vector<size_t> {0, 1}/*position*/};
    std::vector<uint8_t> block0_buffer(BLOCKSIZE);

    if (ReadBlocks(blk0, block0_buffer, fd) == -1) {
        ErrorAbort(state, kFreadFailure, "failed to read %s: %s", arg_filename->data.c_str(),
                strerror(errno));
        return StringValue("");
    }

    // https://ext4.wiki.kernel.org/index.php/Ext4_Disk_Layout
    // Super block starts from block 0, offset 0x400
    //   0x2C: len32 Mount time
    //   0x30: len32 Write time
    //   0x34: len16 Number of mounts since the last fsck
    //   0x38: len16 Magic signature 0xEF53

    time_t mount_time = *reinterpret_cast<uint32_t*>(&block0_buffer[0x400+0x2C]);
    uint16_t mount_count = *reinterpret_cast<uint16_t*>(&block0_buffer[0x400+0x34]);

    if (mount_count > 0) {
        uiPrintf(state, "Device was remounted R/W %d times\n", mount_count);
        uiPrintf(state, "Last remount happened on %s", ctime(&mount_time));
    }

    return StringValue("t");
}


Value* BlockImageRecoverFn(const char* name, State* state, int argc, Expr* argv[]) {
    std::vector<std::unique_ptr<Value>> args;
    if (!ReadValueArgs(state, 2, argv, &args)) {
        return nullptr;
    }

    const Value* filename = args[0].get();
    const Value* ranges = args[1].get();

    if (filename->type != VAL_STRING) {
        ErrorAbort(state, kArgsParsingFailure, "filename argument to %s must be string", name);
        return StringValue("");
    }
    if (ranges->type != VAL_STRING) {
        ErrorAbort(state, kArgsParsingFailure, "ranges argument to %s must be string", name);
        return StringValue("");
    }

    // Output notice to log when recover is attempted
    LOG(INFO) << filename->data << " image corrupted, attempting to recover...";

    // When opened with O_RDWR, libfec rewrites corrupted blocks when they are read
    fec::io fh(filename->data.c_str(), O_RDWR);

    if (!fh) {
        ErrorAbort(state, kLibfecFailure, "fec_open \"%s\" failed: %s", filename->data.c_str(),
                   strerror(errno));
        return StringValue("");
    }

    if (!fh.has_ecc() || !fh.has_verity()) {
        ErrorAbort(state, kLibfecFailure, "unable to use metadata to correct errors");
        return StringValue("");
    }

    fec_status status;

    if (!fh.get_status(status)) {
        ErrorAbort(state, kLibfecFailure, "failed to read FEC status");
        return StringValue("");
    }

    RangeSet rs = parse_range(ranges->data);

    uint8_t buffer[BLOCKSIZE];

    for (size_t i = 0; i < rs.count; ++i) {
        for (size_t j = rs.pos[i * 2]; j < rs.pos[i * 2 + 1]; ++j) {
            // Stay within the data area, libfec validates and corrects metadata
            if (status.data_size <= (uint64_t)j * BLOCKSIZE) {
                continue;
            }

            if (fh.pread(buffer, BLOCKSIZE, (off64_t)j * BLOCKSIZE) != BLOCKSIZE) {
                ErrorAbort(state, kLibfecFailure, "failed to recover %s (block %zu): %s",
                           filename->data.c_str(), j, strerror(errno));
                return StringValue("");
            }

            // If we want to be able to recover from a situation where rewriting a corrected
            // block doesn't guarantee the same data will be returned when re-read later, we
            // can save a copy of corrected blocks to /cache. Note:
            //
            //  1. Maximum space required from /cache is the same as the maximum number of
            //     corrupted blocks we can correct. For RS(255, 253) and a 2 GiB partition,
            //     this would be ~16 MiB, for example.
            //
            //  2. To find out if this block was corrupted, call fec_get_status after each
            //     read and check if the errors field value has increased.
        }
    }
    LOG(INFO) << "..." << filename->data << " image recovered successfully.";
    return StringValue("t");
}

void RegisterBlockImageFunctions() {
    RegisterFunction("block_image_verify", BlockImageVerifyFn);
    RegisterFunction("block_image_update", BlockImageUpdateFn);
    RegisterFunction("block_image_recover", BlockImageRecoverFn);
    RegisterFunction("check_first_block", CheckFirstBlockFn);
    RegisterFunction("range_sha1", RangeSha1Fn);
}