| Zvikomborero VIncent Zvikaramba | a25011a | 2016-07-21 16:32:35 -0400 | [diff] [blame] | 1 | #Uncommenting these urls would only enable |
| 2 | #the power up auto injection and force injection(test case). |
| 3 | XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin |
| 4 | XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin |
| 5 | XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin |
| 6 | |
| 7 | #Version check for XTRA |
| 8 | #DISABLE = 0 |
| 9 | #AUTO = 1 |
| 10 | #XTRA2 = 2 |
| 11 | #XTRA3 = 3 |
| 12 | XTRA_VERSION_CHECK=0 |
| 13 | |
| 14 | # Error Estimate |
| 15 | # _SET = 1 |
| 16 | # _CLEAR = 0 |
| 17 | ERR_ESTIMATE=0 |
| 18 | |
| 19 | #Test |
| 20 | NTP_SERVER=time.izatcloud.net |
| 21 | #Asia |
| 22 | # NTP_SERVER=asia.pool.ntp.org |
| 23 | #Europe |
| 24 | # NTP_SERVER=europe.pool.ntp.org |
| 25 | #North America |
| 26 | # NTP_SERVER=north-america.pool.ntp.org |
| 27 | |
| 28 | # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info |
| 29 | # 4 - Debug, 5 - Verbose |
| 30 | # If DEBUG_LEVEL is commented, Android's logging levels will be used |
| 31 | DEBUG_LEVEL = 4 |
| 32 | |
| 33 | # Intermediate position report, 1=enable, 0=disable |
| 34 | INTERMEDIATE_POS=0 |
| 35 | |
| 36 | # Below bit mask configures how GPS functionalities |
| 37 | # should be locked when user turns off GPS on Settings |
| 38 | # Set bit 0x1 if MO GPS functionalities are to be locked |
| 39 | # Set bit 0x2 if NI GPS functionalities are to be locked |
| 40 | # default - non is locked for backward compatibility |
| 41 | #GPS_LOCK = 0 |
| 42 | |
| 43 | # supl version 1.0 |
| 44 | SUPL_VER=0x10000 |
| 45 | |
| 46 | # Emergency SUPL, 1=enable, 0=disable |
| 47 | SUPL_ES=0 |
| 48 | # Sensor R&D : Non-SUPL ES should be default |
| 49 | |
| 50 | #Choose PDN for Emergency SUPL |
| 51 | #1 - Use emergency PDN |
| 52 | #0 - Use regular SUPL PDN for Emergency SUPL |
| 53 | USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1 |
| 54 | |
| 55 | #SUPL_MODE is a bit mask set in config.xml per carrier by default. |
| 56 | #If it is uncommented here, this value will over write the value from |
| 57 | #config.xml. |
| 58 | #MSA=0X2 |
| 59 | #MSB=0X1 |
| 60 | #Sensor R&D : Change default bit mask |
| 61 | SUPL_MODE=3 |
| 62 | |
| 63 | # GPS Capabilities bit mask |
| 64 | # SCHEDULING = 0x01 |
| 65 | # MSB = 0x02 |
| 66 | # MSA = 0x04 |
| 67 | # ON_DEMAND_TIME = 0x10 |
| 68 | # GEOFENCE = 0x20 |
| 69 | # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE |
| 70 | CAPABILITIES=0x37 |
| 71 | |
| 72 | # Accuracy threshold for intermediate positions |
| 73 | # less accurate positions are ignored, 0 for passing all positions |
| 74 | # ACCURACY_THRES=5000 |
| 75 | |
| 76 | ################################ |
| 77 | ##### AGPS server settings ##### |
| 78 | ################################ |
| 79 | |
| 80 | # FOR SUPL SUPPORT, set the following |
| 81 | # SUPL_HOST=supl.host.com or IP |
| 82 | # SUPL_PORT=1234 |
| 83 | |
| 84 | # FOR C2K PDE SUPPORT, set the following |
| 85 | # C2K_HOST=c2k.pde.com or IP |
| 86 | # C2K_PORT=1234 |
| 87 | |
| 88 | # Bitmask of slots that are available |
| 89 | # for write/install to, where 1s indicate writable, |
| 90 | # and the default value is 0 where no slots |
| 91 | # are writable. For example, AGPS_CERT_WRITABLE_MASK |
| 92 | # of b1000001010 makes 3 slots available |
| 93 | # and the remaining 7 slots unwritable. |
| 94 | #AGPS_CERT_WRITABLE_MASK=0 |
| 95 | |
| 96 | #################################### |
| 97 | # LTE Positioning Profile Settings |
| 98 | #################################### |
| 99 | # 0: Enable RRLP on LTE(Default) |
| 100 | # 1: Enable LPP_User_Plane on LTE |
| 101 | # 2: Enable LPP_Control_Plane |
| 102 | # 3: Enable both LPP_User_Plane and LPP_Control_Plane |
| 103 | LPP_PROFILE = 0 # Sensor R&D : This will not be injected to MODEM |
| 104 | |
| 105 | ################################ |
| 106 | # EXTRA SETTINGS |
| 107 | ################################ |
| 108 | # NMEA provider (1=Modem Processor, 0=Application Processor) |
| 109 | NMEA_PROVIDER=1 |
| 110 | # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) |
| 111 | SGLTE_TARGET=0 |
| 112 | |
| 113 | ################################################## |
| 114 | # Select Positioning Protocol on A-GLONASS system |
| 115 | ################################################## |
| 116 | # 0x1: RRC CPlane |
| 117 | # 0x2: RRLP UPlane |
| 118 | # 0x4: LLP Uplane |
| 119 | A_GLONASS_POS_PROTOCOL_SELECT = 0 #Sensor R&D : This will not be injected to MODEM |