| ######################################## |
| # NLP/WIFI positioning options bit mask |
| ######################################## |
| # Enable NLP fixes for WIPER/ODCPI feature => WIPER = 0x1 |
| # Enable free wifi scan injections for GEOFENCE => FREE_WIFI = 0x2 |
| # Enable SUPL2 MLD wifi => SUPL_WIFI = 0x4 |
| # Enable Attached Wifi AP info injection for GEOFENCE => FREE_AP_INFO = 0x8 |
| # default = WIPER | FREE_WIFI | SUPL_WIFI | FREE_AP_INFO |
| NLP_WIFI_LISTENER_MODE = 0 |
| |
| ################################################## |
| # Select WIFI Wait Timeout value in seconds for SUPL |
| ################################################## |
| WIFI_WAIT_TIMEOUT_SELECT = 0 |
| |
| ################################ |
| # NLP Settings |
| ################################ |
| # NLP_MODE 1: GNP Only, 2: QNP Only, 3: Combo |
| # NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode |
| # to determine how much Tolerance for first position |
| # NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode |
| # to determine how much Tolerance for positions after first |
| # NLP_THRESHOLD: Sets how many failures needed before |
| # switching preferred NLP in Combo mode |
| # NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy |
| # must be, in multiples, between two NLP location reports to |
| # be considered much worse accuracy. Used in switching logic |
| NLP_MODE = 1 |
| NLP_TOLERANCE_TIME_FIRST = 5000 |
| NLP_TOLERANCE_TIME_AFTER = 20000 |
| NLP_THRESHOLD = 3 |
| NLP_ACCURACY_MULTIPLE = 2 |
| |
| # Threshold period for ZPP triggers |
| ZPP_TRIGGER_THRESHOLD=10000 |
| |
| ################################### |
| # GEOFENCE SERVICES |
| ################################### |
| # If set to one of the defined values below, it will override |
| # the responsiveness for geofence services, which implements |
| # the Proximity Alert API. If not set to a value defined below, |
| # which is default, it will not override the responsivness. |
| # The geofence HAL API is unaffected by this value. |
| # GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values: |
| # 1: LOW responsiveness |
| # 2: MEDIUM responsiveness |
| # 3: HIGH responsiveness |
| GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0 |
| |
| ##################################### |
| # IZAT PREMIUM FEATURE SETTINGS |
| ##################################### |
| #Possible states of a feature: |
| #DISABLED |
| #BASIC |
| #PREMIUM |
| |
| #GTP_CELL_PROC valid options: |
| # AP |
| # MODEM |
| GTP_CELL_PROC=MODEM |
| |
| #GTP_CELL valid modes: |
| # DISABLED |
| # BASIC |
| GTP_CELL=BASIC |
| |
| #GTP_WIFI valid modes: |
| # DISABLED |
| # BASIC |
| GTP_WIFI=BASIC |
| |
| #GTP_WAA valid modes: |
| # DISABLED |
| # BASIC |
| GTP_WAA=DISABLED |
| |
| #SAP valid modes: |
| # DISABLED |
| # BASIC |
| # PREMIUM |
| SAP=BASIC |
| |
| #PIP valid modes: |
| # DISABLED |
| # PREMIUM |
| PIP=DISABLED |
| |
| ##################################### |
| # Location process launcher settings |
| ##################################### |
| |
| #Values for PROCESS_STATE: |
| # ENABLED |
| # DISABLED |
| |
| #FEATURE MASKS: |
| # GTP-WIFI 0X03 |
| # GTP-CELL 0X0c |
| # GTP-WAA 0X300 |
| # PIP 0x30 |
| # SAP 0Xc0 |
| |
| #Values for PLATFORMS can be: |
| #1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226 |
| #2. all -> for All platforms |
| |
| #Values for BASEBAND can be: |
| #1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2 |
| #2. all -> for all basebands |
| |
| PROCESS_NAME=/system/bin/garden_app |
| PROCESS_ARGUMENT=-u 0 -q 0 -j 0 -g 0 -l 0 -Z 0 -T 1 |
| PROCESS_STATE=ENABLED |
| PROCESS_GROUPS=gps net_raw |
| PREMIUM_FEATURE=0 |
| IZAT_FEATURE_MASK=0 |
| PLATFORMS=all |
| BASEBAND=auto |
| |
| PROCESS_NAME=/system/bin/gpsone_daemon |
| PROCESS_ARGUMENT= |
| PROCESS_STATE=DISABLED |
| PROCESS_GROUPS=inet net_raw |
| PREMIUM_FEATURE=0 |
| IZAT_FEATURE_MASK=0 |
| PLATFORMS=msm7630_fusion |
| BASEBAND=svlte2a sglte sglte2 |
| |
| PROCESS_NAME=/system/bin/location-mq |
| PROCESS_ARGUMENT= |
| PROCESS_STATE=ENABLED |
| PROCESS_GROUPS=gps |
| PREMIUM_FEATURE=1 |
| IZAT_FEATURE_MASK=0x3f |
| PLATFORMS=all |
| BASEBAND=all |
| |
| PROCESS_NAME=/system/bin/lowi-server |
| PROCESS_ARGUMENT= |
| PROCESS_STATE=ENABLED |
| PROCESS_GROUPS=gps net_admin wifi inet qcom_diag net_raw |
| PREMIUM_FEATURE=1 |
| IZAT_FEATURE_MASK=0x33 |
| PLATFORMS=all |
| BASEBAND=all |
| |
| PROCESS_NAME=/system/bin/quipc_igsn |
| PROCESS_ARGUMENT= |
| PROCESS_STATE=ENABLED |
| PROCESS_GROUPS=inet gps qcom_diag |
| PREMIUM_FEATURE=1 |
| IZAT_FEATURE_MASK=0x30 |
| PLATFORMS=all |
| BASEBAND=all |
| |
| PROCESS_NAME=/system/bin/quipc_main |
| PROCESS_ARGUMENT= |
| PROCESS_STATE=ENABLED |
| PROCESS_GROUPS=gps net_admin wifi inet qcom_diag |
| PREMIUM_FEATURE=1 |
| IZAT_FEATURE_MASK=0x30 |
| PLATFORMS=all |
| BASEBAND=all |
| |
| PROCESS_NAME=/system/bin/xtwifi-inet-agent |
| PROCESS_ARGUMENT= |
| PROCESS_STATE=ENABLED |
| PROCESS_GROUPS=inet gps |
| PREMIUM_FEATURE=1 |
| IZAT_FEATURE_MASK=0x0f |
| PLATFORMS=all |
| BASEBAND=all |
| |
| PROCESS_NAME=/system/bin/xtwifi-client |
| PROCESS_ARGUMENT= |
| PROCESS_STATE=ENABLED |
| PROCESS_GROUPS=net_admin wifi inet gps |
| PREMIUM_FEATURE=1 |
| IZAT_FEATURE_MASK=0x30f |
| PLATFORMS=all |
| BASEBAND=all |
| |
| PROCESS_NAME=/system/vendor/bin/slim_ap_daemon |
| PROCESS_ARGUMENT= |
| PROCESS_STATE=ENABLED |
| PROCESS_GROUPS=gps net_raw misc qcom_oncrpc |
| PREMIUM_FEATURE=1 |
| IZAT_FEATURE_MASK=0xf0 |
| PLATFORMS=all |
| BASEBAND=all |