BoardConfig.mk - android_device_samsung_j5lte - Gitiles

 FORCE_32_BIT := true

 -include vendor/samsung/gprimeltecan/BoardConfigVendor.mk

 LOCAL_PATH := device/samsung/gprimeltecan

 # Inherit from common
 -include device/samsung/qcom-common/BoardConfigCommon.mk

 TARGET_SPECIFIC_HEADER_PATH := $(LOCAL_PATH)/include

 # ANT+
 BOARD_ANT_WIRELESS_DEVICE := "vfs-prerelease"

 # Platform
 TARGET_ARCH := arm
 TARGET_BOARD_PLATFORM := msm8916
 TARGET_CPU_ABI := armeabi-v7a
 TARGET_CPU_ABI2 := armeabi
 TARGET_ARCH_VARIANT := armv7-a-neon
 TARGET_BOARD_PLATFORM_GPU       := qcom-adreno306
 #ARCH_ARM_HAVE_TLS_REGISTER := true

 # Architecture
 TARGET_CPU_SMP := true
 TARGET_CPU_VARIANT := cortex-a53
 TARGET_GLOBAL_CFLAGS += -mfpu=neon -mfloat-abi=softfp
 TARGET_GLOBAL_CPPFLAGS += -mfpu=neon -mfloat-abi=softfp

 # Audio
 AUDIO_FEATURE_LOW_LATENCY_PRIMARY := true
 BOARD_USES_ALSA_AUDIO := true

 # Asserts
 TARGET_OTA_ASSERT_DEVICE := gprimeltecan,gprimeltevl,samsung_sm_g530w,g530w

 # Bluetooth
 BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(LOCAL_PATH)/bluetooth
 BOARD_HAVE_BLUETOOTH := true
 BOARD_HAVE_BLUETOOTH_QCOM := true
 BLUETOOTH_HCI_USE_MCT := true

 # Custom RIL class
 BOARD_RIL_CLASS    := ../../../device/samsung/gprimeltecan/ril
 PROTOBUF_SUPPORTED := true

 # Bootloader
 TARGET_BOOTLOADER_BOARD_NAME := MSM8916

 # Camera
 TARGET_USE_VENDOR_CAMERA_EXT := true
 TARGET_PROVIDES_CAMERA_HAL := true
 USE_DEVICE_SPECIFIC_CAMERA := true

 # Charger
 BOARD_CHARGER_ENABLE_SUSPEND := true
 BOARD_CHARGER_SHOW_PERCENTAGE := true
 BOARD_CHARGING_MODE_BOOTING_LPM := /sys/class/power_supply/battery/batt_lp_charging

 # Enable QCOM FM feature
 AUDIO_FEATURE_ENABLED_FM := true
 BOARD_HAVE_QCOM_FM := true

 #sec_s3fwrn5 <- NFC HAL

 # CMHW
 BOARD_HARDWARE_CLASS += $(LOCAL_PATH)/cmhw

 # Crypto
 TARGET_HW_DISK_ENCRYPTION := true

 # default.prop
 ADDITIONAL_DEFAULT_PROPERTIES += \
 	camera2.portability.force_api=1

 # Display
 MAX_EGL_CACHE_KEY_SIZE := 12*1024
 MAX_EGL_CACHE_SIZE := 2048*1024
 NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
 OVERRIDE_RS_DRIVER := libRSDriver.so
 TARGET_CONTINUOUS_SPLASH_ENABLED := true
 TARGET_HAVE_NEW_GRALLOC := true

 # Encryption
 TARGET_SWV8_DISK_ENCRYPTION := true

 # FM
 AUDIO_FEATURE_ENABLED_FM := true
 TARGET_QCOM_NO_FM_FIRMWARE := true

 # Fonts
 EXTENDED_FONT_FOOTPRINT := true

 # GPS
 #TARGET_GPS_HAL_PATH := $(LOCAL_PATH)/gps
 #TARGET_NO_RPC := true

 # Healthd
 BOARD_HAL_STATIC_LIBRARIES := libhealthd.qcom

 #ART
 #WITH_DEXPREOPT := true

 # Init
 TARGET_INIT_VENDOR_LIB := libinit_msm
 TARGET_LIBINIT_DEFINES_FILE := $(LOCAL_PATH)/init/init_gprimeltecan.cpp
 TARGET_PLATFORM_DEVICE_BASE := /devices/soc.0/
 TARGET_UNIFIED_DEVICE := true
 TARGET_PROVIDES_INIT_RC := true

 # Kernel
 BOARD_CUSTOM_BOOTIMG_MK := $(LOCAL_PATH)/mkbootimg.mk
 BOARD_KERNEL_BASE := 0x80000000
 BOARD_KERNEL_CMDLINE := console=null androidboot.hardware=qcom user_debug=23 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci
 BOARD_KERNEL_PAGESIZE := 2048
 BOARD_KERNEL_SEPARATED_DT := true
 BOARD_KERNEL_TAGS_OFFSET := 0x01E00000
 BOARD_RAMDISK_OFFSET     := 0x02000000
 TARGET_KERNEL_CONFIG := msm8916_sec_defconfig
 TARGET_KERNEL_VARIANT_CONFIG := msm8916_sec_fortuna_can_defconfig
 TARGET_KERNEL_SELINUX_CONFIG := selinux_defconfig
 TARGET_KERNEL_SELINUX_LOG_CONFIG := selinux_log_defconfig
 TARGET_KERNEL_SOURCE := kernel/samsung/grandprime

 # Lights
 TARGET_PROVIDES_LIBLIGHT := false

 # malloc implementation
 MALLOC_IMPL := dlmalloc

 # Partition sizes
 TARGET_USERIMAGES_USE_EXT4          := true
 BOARD_BOOTIMAGE_PARTITION_SIZE      := 13631488
 BOARD_RECOVERYIMAGE_PARTITION_SIZE  := 15728640
 BOARD_SYSTEMIMAGE_PARTITION_SIZE    := 2359296000
 BOARD_SYSTEMIMAGE_PARTITION_TPE    := ext4
 BOARD_CACHEIMAGE_PARTITION_SIZE     := 314572800
 BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE   := ext4
 BOARD_PERSISTIMAGE_PARTITION_SIZE   := 8388608
 BOARD_PERSISTIMAGE_FILE_SYSTEM_TYPE := ext4
 BOARD_USERDATAIMAGE_PARTITION_SIZE  := 4942966784
 BOARD_FLASH_BLOCK_SIZE              := 131072

 # Power
 TARGET_POWERHAL_VARIANT := qcom
 #CM_POWERHAL_EXTENSION := qcom

 # Media
 TARGET_QCOM_MEDIA_VARIANT           := caf
 TARGET_ENABLE_QC_AV_ENHANCEMENTS := true

 # Qualcomm support
 TARGET_USES_QCOM_BSP := true
 COMMON_GLOBAL_CFLAGS += -DQCOM_HARDWARE -DQCOM_BSP
 #HAVE_SYNAPTICS_I2C_RMI4_FW_UPGRADE   := true
 #USE_DEVICE_SPECIFIC_QCOM_PROPRIETARY := true
 #TARGET_USES_NEW_ION_API := true

 #Includes
 TARGET_SPECIFIC_HEADER_PATH := $(LOCAL_PATH)/include

 # Recovery
 BOARD_USE_CUSTOM_RECOVERY_FONT := \"roboto_15x24.h\"
 BOARD_SUPPRESS_EMMC_WIPE := true
 TARGET_RECOVERY_PIXEL_FORMAT := ABGR_8888
 TARGET_RECOVERY_QCOM_RTC_FIX := true
 TARGET_USERIMAGES_USE_EXT4 := true
 TARGET_USERIMAGES_USE_F2FS := false

 # RIL
 TARGET_RIL_VARIANT := caf
 #override to enable audio.
 BOARD_PROVIDES_LIBRIL := false

 # SELinux
 include device/qcom/sepolicy/sepolicy.mk
 include vendor/cm/sepolicy/sepolicy.mk
 include vendor/cm/sepolicy/qcom/sepolicy.mk

 BOARD_SEPOLICY_DIRS += \
     device/samsung/gprimeltecan/sepolicy

 BOARD_SEPOLICY_UNION += \
 	audiod.te \
 	ueventd.te \
 	file.te \
 	shell.te \
 	surfaceflinger.te \
 	bluetooth.te \
 	bluetooth_loader.te \
 	wcnss_service.te \
 	healthd.te \
 	kernel.te \
 	property.te \
 	rild.te \
 	qseecomd.te \
 	system_server.te \
 	time_daemon.te \
 	sysinit.te \
 	system_app.te \
 	mm-qcamerad.te \
 	file_contexts \
 	init_shell.te \
 	init.te \
 	lkmd.te \
 	qmuxd.te \
 	rfs_access.te \
 	rmt_storage.te \
 	keystore.te \
 	perfd.te \
 	mediaserver.te \
 	vold.te \
 	smdexe.te \
 	sec-ril.te \
 	radio.te \
 	qmuxd.te \
 	qmiproxy.te \
 	mtp.te \
 	otp_server.te \
 	mediaserver.te \
 	cs.te \
 	ddexe.te \
 	insthk.te \
 	at_distributor.te \
 	connfwexe.te \
 	ftm_ptt.te \
 	ss_conn_daemon.te \
 	wlandutservice.te \
 	property_contexts

 # Time services
 BOARD_USES_QC_TIME_SERVICES := true

 # TWRP
 #RECOVERY_VARIANT := twrp
 BOARD_HAS_LARGE_FILESYSTEM := true
 BOARD_HAS_NO_SELECT_BUTTON := true
 BOARD_SUPPRESS_SECURE_ERASE := true
 RECOVERY_GRAPHICS_USE_LINELENGTH := true
 RECOVERY_SDCARD_ON_DATA := true
 TW_BRIGHTNESS_PATH := "/sys/class/leds/lcd-backlight/brightness"
 TW_MAX_BRIGHTNESS := 255
 TW_HAS_DOWNLOAD_MODE := true
 TW_HAS_MTP := true
 TW_INCLUDE_CRYPTO := true
 TW_INPUT_BLACKLIST := "accelerometer"
 TW_INTERNAL_STORAGE_PATH := "/data/media/0"
 TW_MTP_DEVICE := /dev/usb_mtp_gadget
 TW_NEW_ION_HEAP := true
 TW_NO_REBOOT_BOOTLOADER := true
 TW_NO_SCREEN_TIMEOUT := true
 TW_NO_USB_STORAGE := true
 TW_TARGET_USES_QCOM_BSP := true
 TW_THEME := portrait_hdpi
 ifeq ($(TW),)
 	TARGET_RECOVERY_FSTAB := $(LOCAL_PATH)/recovery.fstab
 else
 	TARGET_RECOVERY_FSTAB := $(LOCAL_PATH)/recovery/twrp.fstab
 endif

 # Vold
 BOARD_VOLD_DISC_HAS_MULTIPLE_MAJORS := true
 BOARD_VOLD_MAX_PARTITIONS := 67
 TARGET_USE_CUSTOM_LUN_FILE_PATH := /sys/devices/platform/msm_hsusb/gadget/lun%d/file

 # Wifi
 WLAN_CHIPSET := pronto
 BOARD_HAS_QCOM_WLAN := true
 BOARD_HAS_QCOM_WLAN_SDK := true
 BOARD_HAVE_SAMSUNG_WIFI := true
 BOARD_HOSTAPD_DRIVER := NL80211
 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_qcwcn
 BOARD_WLAN_DEVICE := qcwcn
 BOARD_WPA_SUPPLICANT_DRIVER := NL80211
 BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_qcwcn
 TARGET_USES_QCOM_WCNSS_QMI := true
 TARGET_USES_WCNSS_CTRL := true
 WIFI_DRIVER_FW_PATH_AP := "ap"
 WIFI_DRIVER_FW_PATH_STA := "sta"
 WPA_SUPPLICANT_VERSION := VER_0_8_X
 WIFI_DRIVER_MODULE_PATH  := "/system/lib/modules/wlan.ko"
 WIFI_DRIVER_MODULE_NAME := "wlan"

 # inherit from the proprietary version
 -include vendor/samsung/gprimeltecan/BoardConfigVendor.mk

 #make, move, symlink and strip the wlan kernel module.
 KERNEL_EXTERNAL_MODULES:
 	+$(MAKE) -C device/samsung/$(TARGET_DEVICE)/wlan/prima/ WLAN_ROOT=$(ANDROID_BUILD_TOP)/device/samsung/$(TARGET_DEVICE)/wlan/prima/ \
 		KERNEL_SOURCE=$(KERNEL_OUT) ARCH="arm" \
 		CROSS_COMPILE="arm-eabi-"
 	mkdir $(KERNEL_MODULES_OUT)/$(WLAN_CHIPSET)/ -p
 	ln -sf /system/lib/modules/$(WLAN_CHIPSET)/$(WLAN_CHIPSET)_wlan.ko $(TARGET_OUT)/lib/modules/wlan.ko
 	mv device/samsung/$(TARGET_DEVICE)/wlan/prima/wlan.ko $(KERNEL_MODULES_OUT)/$(WLAN_CHIPSET)/$(WLAN_CHIPSET)_wlan.ko
 	arm-eabi-strip --strip-debug $(KERNEL_MODULES_OUT)/$(WLAN_CHIPSET)/$(WLAN_CHIPSET)_wlan.ko
 	+$(MAKE) -C device/samsung/$(TARGET_DEVICE)/wlan/prima/ clean
 TARGET_KERNEL_MODULES := KERNEL_EXTERNAL_MODULES
	FORCE_32_BIT := true

	-include vendor/samsung/gprimeltecan/BoardConfigVendor.mk

	LOCAL_PATH := device/samsung/gprimeltecan

	# Inherit from common
	-include device/samsung/qcom-common/BoardConfigCommon.mk

	TARGET_SPECIFIC_HEADER_PATH := $(LOCAL_PATH)/include

	# ANT+
	BOARD_ANT_WIRELESS_DEVICE := "vfs-prerelease"

	# Platform
	TARGET_ARCH := arm
	TARGET_BOARD_PLATFORM := msm8916
	TARGET_CPU_ABI := armeabi-v7a
	TARGET_CPU_ABI2 := armeabi
	TARGET_ARCH_VARIANT := armv7-a-neon
	TARGET_BOARD_PLATFORM_GPU := qcom-adreno306
	#ARCH_ARM_HAVE_TLS_REGISTER := true

	# Architecture
	TARGET_CPU_SMP := true
	TARGET_CPU_VARIANT := cortex-a53
	TARGET_GLOBAL_CFLAGS += -mfpu=neon -mfloat-abi=softfp
	TARGET_GLOBAL_CPPFLAGS += -mfpu=neon -mfloat-abi=softfp

	# Audio
	AUDIO_FEATURE_LOW_LATENCY_PRIMARY := true
	BOARD_USES_ALSA_AUDIO := true

	# Asserts
	TARGET_OTA_ASSERT_DEVICE := gprimeltecan,gprimeltevl,samsung_sm_g530w,g530w

	# Bluetooth
	BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(LOCAL_PATH)/bluetooth
	BOARD_HAVE_BLUETOOTH := true
	BOARD_HAVE_BLUETOOTH_QCOM := true
	BLUETOOTH_HCI_USE_MCT := true

	# Custom RIL class
	BOARD_RIL_CLASS := ../../../device/samsung/gprimeltecan/ril
	PROTOBUF_SUPPORTED := true

	# Bootloader
	TARGET_BOOTLOADER_BOARD_NAME := MSM8916

	# Camera
	TARGET_USE_VENDOR_CAMERA_EXT := true
	TARGET_PROVIDES_CAMERA_HAL := true
	USE_DEVICE_SPECIFIC_CAMERA := true

	# Charger
	BOARD_CHARGER_ENABLE_SUSPEND := true
	BOARD_CHARGER_SHOW_PERCENTAGE := true
	BOARD_CHARGING_MODE_BOOTING_LPM := /sys/class/power_supply/battery/batt_lp_charging

	# Enable QCOM FM feature
	AUDIO_FEATURE_ENABLED_FM := true
	BOARD_HAVE_QCOM_FM := true

	#sec_s3fwrn5 <- NFC HAL

	# CMHW
	BOARD_HARDWARE_CLASS += $(LOCAL_PATH)/cmhw

	# Crypto
	TARGET_HW_DISK_ENCRYPTION := true

	# default.prop
	ADDITIONAL_DEFAULT_PROPERTIES += \
	camera2.portability.force_api=1

	# Display
	MAX_EGL_CACHE_KEY_SIZE := 12*1024
	MAX_EGL_CACHE_SIZE := 2048*1024
	NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
	OVERRIDE_RS_DRIVER := libRSDriver.so
	TARGET_CONTINUOUS_SPLASH_ENABLED := true
	TARGET_HAVE_NEW_GRALLOC := true

	# Encryption
	TARGET_SWV8_DISK_ENCRYPTION := true

	# FM
	AUDIO_FEATURE_ENABLED_FM := true
	TARGET_QCOM_NO_FM_FIRMWARE := true

	# Fonts
	EXTENDED_FONT_FOOTPRINT := true

	# GPS
	#TARGET_GPS_HAL_PATH := $(LOCAL_PATH)/gps
	#TARGET_NO_RPC := true

	# Healthd
	BOARD_HAL_STATIC_LIBRARIES := libhealthd.qcom

	#ART
	#WITH_DEXPREOPT := true

	# Init
	TARGET_INIT_VENDOR_LIB := libinit_msm
	TARGET_LIBINIT_DEFINES_FILE := $(LOCAL_PATH)/init/init_gprimeltecan.cpp
	TARGET_PLATFORM_DEVICE_BASE := /devices/soc.0/
	TARGET_UNIFIED_DEVICE := true
	TARGET_PROVIDES_INIT_RC := true

	# Kernel
	BOARD_CUSTOM_BOOTIMG_MK := $(LOCAL_PATH)/mkbootimg.mk
	BOARD_KERNEL_BASE := 0x80000000
	BOARD_KERNEL_CMDLINE := console=null androidboot.hardware=qcom user_debug=23 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci
	BOARD_KERNEL_PAGESIZE := 2048
	BOARD_KERNEL_SEPARATED_DT := true
	BOARD_KERNEL_TAGS_OFFSET := 0x01E00000
	BOARD_RAMDISK_OFFSET := 0x02000000
	TARGET_KERNEL_CONFIG := msm8916_sec_defconfig
	TARGET_KERNEL_VARIANT_CONFIG := msm8916_sec_fortuna_can_defconfig
	TARGET_KERNEL_SELINUX_CONFIG := selinux_defconfig
	TARGET_KERNEL_SELINUX_LOG_CONFIG := selinux_log_defconfig
	TARGET_KERNEL_SOURCE := kernel/samsung/grandprime

	# Lights
	TARGET_PROVIDES_LIBLIGHT := false

	# malloc implementation
	MALLOC_IMPL := dlmalloc

	# Partition sizes
	TARGET_USERIMAGES_USE_EXT4 := true
	BOARD_BOOTIMAGE_PARTITION_SIZE := 13631488
	BOARD_RECOVERYIMAGE_PARTITION_SIZE := 15728640
	BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2359296000
	BOARD_SYSTEMIMAGE_PARTITION_TPE := ext4
	BOARD_CACHEIMAGE_PARTITION_SIZE := 314572800
	BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
	BOARD_PERSISTIMAGE_PARTITION_SIZE := 8388608
	BOARD_PERSISTIMAGE_FILE_SYSTEM_TYPE := ext4
	BOARD_USERDATAIMAGE_PARTITION_SIZE := 4942966784
	BOARD_FLASH_BLOCK_SIZE := 131072

	# Power
	TARGET_POWERHAL_VARIANT := qcom
	#CM_POWERHAL_EXTENSION := qcom

	# Media
	TARGET_QCOM_MEDIA_VARIANT := caf
	TARGET_ENABLE_QC_AV_ENHANCEMENTS := true

	# Qualcomm support
	TARGET_USES_QCOM_BSP := true
	COMMON_GLOBAL_CFLAGS += -DQCOM_HARDWARE -DQCOM_BSP
	#HAVE_SYNAPTICS_I2C_RMI4_FW_UPGRADE := true
	#USE_DEVICE_SPECIFIC_QCOM_PROPRIETARY := true
	#TARGET_USES_NEW_ION_API := true

	#Includes
	TARGET_SPECIFIC_HEADER_PATH := $(LOCAL_PATH)/include

	# Recovery
	BOARD_USE_CUSTOM_RECOVERY_FONT := \"roboto_15x24.h\"
	BOARD_SUPPRESS_EMMC_WIPE := true
	TARGET_RECOVERY_PIXEL_FORMAT := ABGR_8888
	TARGET_RECOVERY_QCOM_RTC_FIX := true
	TARGET_USERIMAGES_USE_EXT4 := true
	TARGET_USERIMAGES_USE_F2FS := false

	# RIL
	TARGET_RIL_VARIANT := caf
	#override to enable audio.
	BOARD_PROVIDES_LIBRIL := false

	# SELinux
	include device/qcom/sepolicy/sepolicy.mk
	include vendor/cm/sepolicy/sepolicy.mk
	include vendor/cm/sepolicy/qcom/sepolicy.mk

	BOARD_SEPOLICY_DIRS += \
	device/samsung/gprimeltecan/sepolicy

	BOARD_SEPOLICY_UNION += \
	audiod.te \
	ueventd.te \
	file.te \
	shell.te \
	surfaceflinger.te \
	bluetooth.te \
	bluetooth_loader.te \
	wcnss_service.te \
	healthd.te \
	kernel.te \
	property.te \
	rild.te \
	qseecomd.te \
	system_server.te \
	time_daemon.te \
	sysinit.te \
	system_app.te \
	mm-qcamerad.te \
	file_contexts \
	init_shell.te \
	init.te \
	lkmd.te \
	qmuxd.te \
	rfs_access.te \
	rmt_storage.te \
	keystore.te \
	perfd.te \
	mediaserver.te \
	vold.te \
	smdexe.te \
	sec-ril.te \
	radio.te \
	qmuxd.te \
	qmiproxy.te \
	mtp.te \
	otp_server.te \
	mediaserver.te \
	cs.te \
	ddexe.te \
	insthk.te \
	at_distributor.te \
	connfwexe.te \
	ftm_ptt.te \
	ss_conn_daemon.te \
	wlandutservice.te \
	property_contexts

	# Time services
	BOARD_USES_QC_TIME_SERVICES := true

	# TWRP
	#RECOVERY_VARIANT := twrp
	BOARD_HAS_LARGE_FILESYSTEM := true
	BOARD_HAS_NO_SELECT_BUTTON := true
	BOARD_SUPPRESS_SECURE_ERASE := true
	RECOVERY_GRAPHICS_USE_LINELENGTH := true
	RECOVERY_SDCARD_ON_DATA := true
	TW_BRIGHTNESS_PATH := "/sys/class/leds/lcd-backlight/brightness"
	TW_MAX_BRIGHTNESS := 255
	TW_HAS_DOWNLOAD_MODE := true
	TW_HAS_MTP := true
	TW_INCLUDE_CRYPTO := true
	TW_INPUT_BLACKLIST := "accelerometer"
	TW_INTERNAL_STORAGE_PATH := "/data/media/0"
	TW_MTP_DEVICE := /dev/usb_mtp_gadget
	TW_NEW_ION_HEAP := true
	TW_NO_REBOOT_BOOTLOADER := true
	TW_NO_SCREEN_TIMEOUT := true
	TW_NO_USB_STORAGE := true
	TW_TARGET_USES_QCOM_BSP := true
	TW_THEME := portrait_hdpi
	ifeq ($(TW),)
	TARGET_RECOVERY_FSTAB := $(LOCAL_PATH)/recovery.fstab
	else
	TARGET_RECOVERY_FSTAB := $(LOCAL_PATH)/recovery/twrp.fstab
	endif

	# Vold
	BOARD_VOLD_DISC_HAS_MULTIPLE_MAJORS := true
	BOARD_VOLD_MAX_PARTITIONS := 67
	TARGET_USE_CUSTOM_LUN_FILE_PATH := /sys/devices/platform/msm_hsusb/gadget/lun%d/file

	# Wifi
	WLAN_CHIPSET := pronto
	BOARD_HAS_QCOM_WLAN := true
	BOARD_HAS_QCOM_WLAN_SDK := true
	BOARD_HAVE_SAMSUNG_WIFI := true
	BOARD_HOSTAPD_DRIVER := NL80211
	BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_qcwcn
	BOARD_WLAN_DEVICE := qcwcn
	BOARD_WPA_SUPPLICANT_DRIVER := NL80211
	BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_qcwcn
	TARGET_USES_QCOM_WCNSS_QMI := true
	TARGET_USES_WCNSS_CTRL := true
	WIFI_DRIVER_FW_PATH_AP := "ap"
	WIFI_DRIVER_FW_PATH_STA := "sta"
	WPA_SUPPLICANT_VERSION := VER_0_8_X
	WIFI_DRIVER_MODULE_PATH := "/system/lib/modules/wlan.ko"
	WIFI_DRIVER_MODULE_NAME := "wlan"

	# inherit from the proprietary version
	-include vendor/samsung/gprimeltecan/BoardConfigVendor.mk

	#make, move, symlink and strip the wlan kernel module.
	KERNEL_EXTERNAL_MODULES:
	+$(MAKE) -C device/samsung/$(TARGET_DEVICE)/wlan/prima/ WLAN_ROOT=$(ANDROID_BUILD_TOP)/device/samsung/$(TARGET_DEVICE)/wlan/prima/ \
	KERNEL_SOURCE=$(KERNEL_OUT) ARCH="arm" \
	CROSS_COMPILE="arm-eabi-"
	mkdir $(KERNEL_MODULES_OUT)/$(WLAN_CHIPSET)/ -p
	ln -sf /system/lib/modules/$(WLAN_CHIPSET)/$(WLAN_CHIPSET)_wlan.ko $(TARGET_OUT)/lib/modules/wlan.ko
	mv device/samsung/$(TARGET_DEVICE)/wlan/prima/wlan.ko $(KERNEL_MODULES_OUT)/$(WLAN_CHIPSET)/$(WLAN_CHIPSET)_wlan.ko
	arm-eabi-strip --strip-debug $(KERNEL_MODULES_OUT)/$(WLAN_CHIPSET)/$(WLAN_CHIPSET)_wlan.ko
	+$(MAKE) -C device/samsung/$(TARGET_DEVICE)/wlan/prima/ clean
	TARGET_KERNEL_MODULES := KERNEL_EXTERNAL_MODULES