blob: c2e1385b0b9f8250fab40a0ee497900d4e3ba929 [file] [log] [blame]
/*
* Copyright (C) 2007 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <ctype.h>
#include <errno.h>
#include <fcntl.h>
#include <limits.h>
#include <sys/stat.h>
#include <sys/wait.h>
#include <unistd.h>
#include "amend/amend.h"
#include "common.h"
#include "install.h"
#include "mincrypt/rsa.h"
#include "minui/minui.h"
#include "minzip/SysUtil.h"
#include "minzip/Zip.h"
#include "mtdutils/mounts.h"
#include "mtdutils/mtdutils.h"
#include "roots.h"
#include "verifier.h"
#include "firmware.h"
#define ASSUMED_UPDATE_SCRIPT_NAME "META-INF/com/google/android/update-script"
#define ASSUMED_UPDATE_BINARY_NAME "META-INF/com/google/android/update-binary"
#define PUBLIC_KEYS_FILE "/res/keys"
static const ZipEntry *
find_update_script(ZipArchive *zip)
{
//TODO: Get the location of this script from the MANIFEST.MF file
return mzFindZipEntry(zip, ASSUMED_UPDATE_SCRIPT_NAME);
}
static int read_data(ZipArchive *zip, const ZipEntry *entry,
char** ppData, int* pLength) {
int len = (int)mzGetZipEntryUncompLen(entry);
if (len <= 0) {
LOGE("Bad data length %d\n", len);
return -1;
}
char *data = malloc(len + 1);
if (data == NULL) {
LOGE("Can't allocate %d bytes for data\n", len + 1);
return -2;
}
bool ok = mzReadZipEntry(zip, entry, data, len);
if (!ok) {
LOGE("Error while reading data\n");
free(data);
return -3;
}
data[len] = '\0'; // not necessary, but just to be safe
*ppData = data;
if (pLength) {
*pLength = len;
}
return 0;
}
static int
handle_update_script(ZipArchive *zip, const ZipEntry *update_script_entry)
{
/* Read the entire script into a buffer.
*/
int script_len;
char* script_data;
if (read_data(zip, update_script_entry, &script_data, &script_len) < 0) {
LOGE("Can't read update script\n");
return INSTALL_ERROR;
}
/* Parse the script. Note that the script and parse tree are never freed.
*/
const AmCommandList *commands = parseAmendScript(script_data, script_len);
if (commands == NULL) {
LOGE("Syntax error in update script\n");
return INSTALL_ERROR;
} else {
UnterminatedString name = mzGetZipEntryFileName(update_script_entry);
LOGI("Parsed %.*s\n", name.len, name.str);
}
/* Execute the script.
*/
int ret = execCommandList((ExecContext *)1, commands);
if (ret != 0) {
int num = ret;
char *line = NULL, *next = script_data;
while (next != NULL && ret-- > 0) {
line = next;
next = memchr(line, '\n', script_data + script_len - line);
if (next != NULL) *next++ = '\0';
}
LOGE("Failure at line %d:\n%s\n", num, next ? line : "(not found)");
return INSTALL_ERROR;
}
LOGI("Installation complete.\n");
return INSTALL_SUCCESS;
}
// The update binary ask us to install a firmware file on reboot. Set
// that up. Takes ownership of type and filename.
static int
handle_firmware_update(char* type, char* filename) {
struct stat st_data;
if (stat(filename, &st_data) < 0) {
LOGE("Error stat'ing %s: %s\n", filename, strerror(errno));
return INSTALL_ERROR;
}
LOGI("type is %s; size is %d; file is %s\n",
type, (int)st_data.st_size, filename);
char* data = malloc(st_data.st_size);
if (data == NULL) {
LOGE("Can't allocate %d bytes for firmware data\n", st_data.st_size);
return INSTALL_ERROR;
}
FILE* f = fopen(filename, "rb");
if (f == NULL) {
LOGE("Failed to open %s: %s\n", filename, strerror(errno));
return INSTALL_ERROR;
}
if (fread(data, 1, st_data.st_size, f) != st_data.st_size) {
LOGE("Failed to read firmware data: %s\n", strerror(errno));
return INSTALL_ERROR;
}
fclose(f);
if (remember_firmware_update(type, data, st_data.st_size)) {
LOGE("Can't store %s image\n", type);
free(data);
return INSTALL_ERROR;
}
free(filename);
return INSTALL_SUCCESS;
}
// If the package contains an update binary, extract it and run it.
static int
try_update_binary(const char *path, ZipArchive *zip) {
const ZipEntry* binary_entry =
mzFindZipEntry(zip, ASSUMED_UPDATE_BINARY_NAME);
if (binary_entry == NULL) {
return INSTALL_CORRUPT;
}
char* binary = "/tmp/update_binary";
unlink(binary);
int fd = creat(binary, 0755);
if (fd < 0) {
LOGE("Can't make %s\n", binary);
return 1;
}
bool ok = mzExtractZipEntryToFile(zip, binary_entry, fd);
close(fd);
if (!ok) {
LOGE("Can't copy %s\n", ASSUMED_UPDATE_BINARY_NAME);
return 1;
}
int pipefd[2];
pipe(pipefd);
// When executing the update binary contained in the package, the
// arguments passed are:
//
// - the version number for this interface (currently 1)
//
// - an fd to which the program can write in order to update the
// progress bar. The program can write single-line commands:
//
// progress <frac> <secs>
// fill up <frac> of the progress bar over <secs> seconds.
//
// firmware <"hboot"|"radio"> <filename>
// arrange to install the contents of <filename> in the
// given partition on reboot.
//
// ui_print <string>
// display <string> on the screen.
//
// - the name of the package zip file.
//
char** args = malloc(sizeof(char*) * 5);
args[0] = binary;
args[1] = "1";
args[2] = malloc(10);
sprintf(args[2], "%d", pipefd[1]);
args[3] = (char*)path;
args[4] = NULL;
pid_t pid = fork();
if (pid == 0) {
close(pipefd[0]);
execv(binary, args);
fprintf(stderr, "E:Can't run %s (%s)\n", binary, strerror(errno));
_exit(-1);
}
close(pipefd[1]);
char* firmware_type = NULL;
char* firmware_filename = NULL;
char buffer[81];
FILE* from_child = fdopen(pipefd[0], "r");
while (fgets(buffer, sizeof(buffer), from_child) != NULL) {
LOGI("read: %s", buffer);
char* command = strtok(buffer, " \n");
if (command == NULL) {
continue;
} else if (strcmp(command, "progress") == 0) {
char* fraction_s = strtok(NULL, " \n");
char* seconds_s = strtok(NULL, " \n");
float fraction = strtof(fraction_s, NULL);
int seconds = strtol(seconds_s, NULL, 10);
ui_show_progress(fraction * (1-VERIFICATION_PROGRESS_FRACTION),
seconds);
} else if (strcmp(command, "firmware") == 0) {
char* type = strtok(NULL, " \n");
char* filename = strtok(NULL, " \n");
if (type != NULL && filename != NULL) {
if (firmware_type != NULL) {
LOGE("ignoring attempt to do multiple firmware updates");
} else {
firmware_type = strdup(type);
firmware_filename = strdup(filename);
}
}
} else if (strcmp(command, "ui_print") == 0) {
char* str = strtok(NULL, "\n");
if (str) {
ui_print(str);
} else {
ui_print("\n");
}
} else {
LOGE("unknown command [%s]\n", command);
}
}
fclose(from_child);
int status;
waitpid(pid, &status, 0);
if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) {
LOGE("Error in %s\n(Status %d)\n", path, WEXITSTATUS(status));
return INSTALL_ERROR;
}
if (firmware_type != NULL) {
return handle_firmware_update(firmware_type, firmware_filename);
} else {
return INSTALL_SUCCESS;
}
}
static int
handle_update_package(const char *path, ZipArchive *zip,
const RSAPublicKey *keys, int numKeys)
{
// Give verification half the progress bar...
ui_print("Verifying update package...\n");
ui_show_progress(
VERIFICATION_PROGRESS_FRACTION,
VERIFICATION_PROGRESS_TIME);
if (!verify_jar_signature(zip, keys, numKeys)) {
LOGE("Verification failed\n");
return INSTALL_CORRUPT;
}
// Update should take the rest of the progress bar.
ui_print("Installing update...\n");
int result = try_update_binary(path, zip);
if (result == INSTALL_SUCCESS || result == INSTALL_ERROR) {
register_package_root(NULL, NULL); // Unregister package root
return result;
}
// if INSTALL_CORRUPT is returned, this package doesn't have an
// update binary. Fall back to the older mechanism of looking for
// an update script.
const ZipEntry *script_entry;
script_entry = find_update_script(zip);
if (script_entry == NULL) {
LOGE("Can't find update script\n");
return INSTALL_CORRUPT;
}
if (register_package_root(zip, path) < 0) {
LOGE("Can't register package root\n");
return INSTALL_ERROR;
}
int ret = handle_update_script(zip, script_entry);
register_package_root(NULL, NULL); // Unregister package root
return ret;
}
// Reads a file containing one or more public keys as produced by
// DumpPublicKey: this is an RSAPublicKey struct as it would appear
// as a C source literal, eg:
//
// "{64,0xc926ad21,{1795090719,...,-695002876},{-857949815,...,1175080310}}"
//
// (Note that the braces and commas in this example are actual
// characters the parser expects to find in the file; the ellipses
// indicate more numbers omitted from this example.)
//
// The file may contain multiple keys in this format, separated by
// commas. The last key must not be followed by a comma.
//
// Returns NULL if the file failed to parse, or if it contain zero keys.
static RSAPublicKey*
load_keys(const char* filename, int* numKeys) {
RSAPublicKey* out = NULL;
*numKeys = 0;
FILE* f = fopen(filename, "r");
if (f == NULL) {
LOGE("opening %s: %s\n", filename, strerror(errno));
goto exit;
}
int i;
bool done = false;
while (!done) {
++*numKeys;
out = realloc(out, *numKeys * sizeof(RSAPublicKey));
RSAPublicKey* key = out + (*numKeys - 1);
if (fscanf(f, " { %i , %i , { %i",
&(key->len), &(key->n0inv), &(key->n[0])) != 3) {
goto exit;
}
if (key->len != RSANUMWORDS) {
LOGE("key length (%d) does not match expected size\n", key->len);
goto exit;
}
for (i = 1; i < key->len; ++i) {
if (fscanf(f, " , %i", &(key->n[i])) != 1) goto exit;
}
if (fscanf(f, " } , { %i", &(key->rr[0])) != 1) goto exit;
for (i = 1; i < key->len; ++i) {
if (fscanf(f, " , %i", &(key->rr[i])) != 1) goto exit;
}
fscanf(f, " } } ");
// if the line ends in a comma, this file has more keys.
switch (fgetc(f)) {
case ',':
// more keys to come.
break;
case EOF:
done = true;
break;
default:
LOGE("unexpected character between keys\n");
goto exit;
}
}
fclose(f);
return out;
exit:
if (f) fclose(f);
free(out);
*numKeys = 0;
return NULL;
}
int
install_package(const char *root_path)
{
ui_set_background(BACKGROUND_ICON_INSTALLING);
ui_print("Finding update package...\n");
ui_show_indeterminate_progress();
LOGI("Update location: %s\n", root_path);
if (ensure_root_path_mounted(root_path) != 0) {
LOGE("Can't mount %s\n", root_path);
return INSTALL_CORRUPT;
}
char path[PATH_MAX] = "";
if (translate_root_path(root_path, path, sizeof(path)) == NULL) {
LOGE("Bad path %s\n", root_path);
return INSTALL_CORRUPT;
}
ui_print("Opening update package...\n");
LOGI("Update file path: %s\n", path);
int numKeys;
RSAPublicKey* loadedKeys = load_keys(PUBLIC_KEYS_FILE, &numKeys);
if (loadedKeys == NULL) {
LOGE("Failed to load keys\n");
return INSTALL_CORRUPT;
}
LOGI("%d key(s) loaded from %s\n", numKeys, PUBLIC_KEYS_FILE);
/* Try to open the package.
*/
ZipArchive zip;
int err = mzOpenZipArchive(path, &zip);
if (err != 0) {
LOGE("Can't open %s\n(%s)\n", path, err != -1 ? strerror(err) : "bad");
return INSTALL_CORRUPT;
}
/* Verify and install the contents of the package.
*/
int status = handle_update_package(path, &zip, loadedKeys, numKeys);
mzCloseZipArchive(&zip);
free(loadedKeys);
return status;
}