| /* |
| * Copyright (C) 2014 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <stdbool.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <unistd.h> |
| |
| #include <fcntl.h> |
| #include <stdio.h> |
| |
| #include <sys/cdefs.h> |
| #include <sys/ioctl.h> |
| #include <sys/mman.h> |
| #include <sys/types.h> |
| |
| #include <linux/fb.h> |
| #include <linux/kd.h> |
| |
| #include "minui.h" |
| #include "graphics.h" |
| #include <pixelflinger/pixelflinger.h> |
| |
| static GRSurface* fbdev_init(minui_backend*); |
| static GRSurface* fbdev_flip(minui_backend*); |
| static void fbdev_blank(minui_backend*, bool); |
| static void fbdev_exit(minui_backend*); |
| |
| static GRSurface gr_framebuffer[2]; |
| static bool double_buffered; |
| static GRSurface* gr_draw = NULL; |
| static int displayed_buffer; |
| |
| static fb_var_screeninfo vi; |
| static int fb_fd = -1; |
| static __u32 smem_len; |
| |
| static minui_backend my_backend = { |
| .init = fbdev_init, |
| .flip = fbdev_flip, |
| .blank = fbdev_blank, |
| .exit = fbdev_exit, |
| }; |
| |
| minui_backend* open_fbdev() { |
| return &my_backend; |
| } |
| |
| static void fbdev_blank(minui_backend* backend __unused, bool blank) |
| { |
| #if defined(TW_NO_SCREEN_BLANK) && defined(TW_BRIGHTNESS_PATH) && defined(TW_MAX_BRIGHTNESS) |
| int fd; |
| char brightness[4]; |
| snprintf(brightness, 4, "%03d", TW_MAX_BRIGHTNESS/2); |
| |
| fd = open(TW_BRIGHTNESS_PATH, O_RDWR); |
| if (fd < 0) { |
| perror("cannot open LCD backlight"); |
| return; |
| } |
| write(fd, blank ? "000" : brightness, 3); |
| close(fd); |
| |
| #ifdef TW_SECONDARY_BRIGHTNESS_PATH |
| fd = open(TW_SECONDARY_BRIGHTNESS_PATH, O_RDWR); |
| if (fd < 0) { |
| perror("cannot open LCD backlight 2"); |
| return; |
| } |
| write(fd, blank ? "000" : brightness, 3); |
| close(fd); |
| #endif |
| #else |
| #ifndef TW_NO_SCREEN_BLANK |
| int ret; |
| |
| ret = ioctl(fb_fd, FBIOBLANK, blank ? FB_BLANK_POWERDOWN : FB_BLANK_UNBLANK); |
| if (ret < 0) |
| perror("ioctl(): blank"); |
| #endif |
| #endif |
| } |
| |
| static void set_displayed_framebuffer(unsigned n) |
| { |
| if (n > 1 || !double_buffered) return; |
| |
| vi.yres_virtual = gr_framebuffer[0].height * 2; |
| vi.yoffset = n * gr_framebuffer[0].height; |
| vi.bits_per_pixel = gr_framebuffer[0].pixel_bytes * 8; |
| if (ioctl(fb_fd, FBIOPUT_VSCREENINFO, &vi) < 0) { |
| perror("active fb swap failed"); |
| #ifdef TW_FBIOPAN |
| } else { |
| if (ioctl(fb_fd, FBIOPAN_DISPLAY, &vi) < 0) { |
| perror("pan failed"); |
| } |
| #endif |
| } |
| displayed_buffer = n; |
| } |
| |
| static GRSurface* fbdev_init(minui_backend* backend) { |
| int retry = 20; |
| int fd = -1; |
| while (fd == -1) { |
| fd = open("/dev/graphics/fb0", O_RDWR); |
| if (fd == -1) { |
| if (--retry) { |
| // wait for init to create the device node |
| perror("cannot open fb0 (retrying)"); |
| usleep(100000); |
| } else { |
| perror("cannot open fb0 (giving up)"); |
| return NULL; |
| } |
| } |
| } |
| |
| if (ioctl(fd, FBIOGET_VSCREENINFO, &vi) < 0) { |
| perror("failed to get fb0 info (FBIOGET_VSCREENINFO)"); |
| close(fd); |
| return NULL; |
| } |
| |
| #ifdef RECOVERY_FORCE_RGB_565 |
| // Changing fb_var_screeninfo can affect fb_fix_screeninfo, |
| // so this needs done before querying for fi. |
| printf("Forcing pixel format: RGB_565\n"); |
| vi.blue.offset = 0; |
| vi.green.offset = 5; |
| vi.red.offset = 11; |
| vi.blue.length = 5; |
| vi.green.length = 6; |
| vi.red.length = 5; |
| vi.blue.msb_right = 0; |
| vi.green.msb_right = 0; |
| vi.red.msb_right = 0; |
| vi.transp.offset = 0; |
| vi.transp.length = 0; |
| vi.bits_per_pixel = 16; |
| |
| if (ioctl(fd, FBIOPUT_VSCREENINFO, &vi) < 0) { |
| perror("failed to put force_rgb_565 fb0 info"); |
| close(fd); |
| return NULL; |
| } |
| #endif |
| |
| fb_fix_screeninfo fi; |
| if (ioctl(fd, FBIOGET_FSCREENINFO, &fi) < 0) { |
| perror("failed to get fb0 info (FBIOGET_FSCREENINFO)"); |
| close(fd); |
| return NULL; |
| } |
| |
| // We print this out for informational purposes only, but |
| // throughout we assume that the framebuffer device uses an RGBX |
| // pixel format. This is the case for every development device I |
| // have access to. For some of those devices (eg, hammerhead aka |
| // Nexus 5), FBIOGET_VSCREENINFO *reports* that it wants a |
| // different format (XBGR) but actually produces the correct |
| // results on the display when you write RGBX. |
| // |
| // If you have a device that actually *needs* another pixel format |
| // (ie, BGRX, or 565), patches welcome... |
| |
| printf("fb0 reports (possibly inaccurate):\n" |
| " vi.bits_per_pixel = %d\n" |
| " vi.red.offset = %3d .length = %3d\n" |
| " vi.green.offset = %3d .length = %3d\n" |
| " vi.blue.offset = %3d .length = %3d\n", |
| vi.bits_per_pixel, |
| vi.red.offset, vi.red.length, |
| vi.green.offset, vi.green.length, |
| vi.blue.offset, vi.blue.length); |
| |
| void* bits = mmap(0, fi.smem_len, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); |
| if (bits == MAP_FAILED) { |
| perror("failed to mmap framebuffer"); |
| close(fd); |
| return NULL; |
| } |
| |
| memset(bits, 0, fi.smem_len); |
| |
| gr_framebuffer[0].width = vi.xres; |
| gr_framebuffer[0].height = vi.yres; |
| gr_framebuffer[0].row_bytes = fi.line_length; |
| gr_framebuffer[0].pixel_bytes = vi.bits_per_pixel / 8; |
| #ifdef RECOVERY_GRAPHICS_FORCE_USE_LINELENGTH |
| printf("Forcing line length\n"); |
| vi.xres_virtual = fi.line_length / gr_framebuffer[0].pixel_bytes; |
| #endif |
| gr_framebuffer[0].data = reinterpret_cast<uint8_t*>(bits); |
| if (vi.bits_per_pixel == 16) { |
| printf("setting GGL_PIXEL_FORMAT_RGB_565\n"); |
| gr_framebuffer[0].format = GGL_PIXEL_FORMAT_RGB_565; |
| } else if (vi.red.offset == 8 || vi.red.offset == 16) { |
| printf("setting GGL_PIXEL_FORMAT_BGRA_8888\n"); |
| gr_framebuffer[0].format = GGL_PIXEL_FORMAT_BGRA_8888; |
| } else if (vi.red.offset == 0) { |
| printf("setting GGL_PIXEL_FORMAT_RGBA_8888\n"); |
| gr_framebuffer[0].format = GGL_PIXEL_FORMAT_RGBA_8888; |
| } else if (vi.red.offset == 24) { |
| printf("setting GGL_PIXEL_FORMAT_RGBX_8888\n"); |
| gr_framebuffer[0].format = GGL_PIXEL_FORMAT_RGBX_8888; |
| } else { |
| if (vi.red.length == 8) { |
| printf("No valid pixel format detected, trying GGL_PIXEL_FORMAT_RGBX_8888\n"); |
| gr_framebuffer[0].format = GGL_PIXEL_FORMAT_RGBX_8888; |
| } else { |
| printf("No valid pixel format detected, trying GGL_PIXEL_FORMAT_RGB_565\n"); |
| gr_framebuffer[0].format = GGL_PIXEL_FORMAT_RGB_565; |
| } |
| } |
| |
| // Drawing directly to the framebuffer takes about 5 times longer. |
| // Instead, we will allocate some memory and draw to that, then |
| // memcpy the data into the framebuffer later. |
| gr_draw = (GRSurface*) malloc(sizeof(GRSurface)); |
| if (!gr_draw) { |
| perror("failed to allocate gr_draw"); |
| close(fd); |
| munmap(bits, fi.smem_len); |
| return NULL; |
| } |
| memcpy(gr_draw, gr_framebuffer, sizeof(GRSurface)); |
| gr_draw->data = (unsigned char*) calloc(gr_draw->height * gr_draw->row_bytes, 1); |
| if (!gr_draw->data) { |
| perror("failed to allocate in-memory surface"); |
| close(fd); |
| free(gr_draw); |
| munmap(bits, fi.smem_len); |
| return NULL; |
| } |
| |
| /* check if we can use double buffering */ |
| if (vi.yres * fi.line_length * 2 <= fi.smem_len) { |
| double_buffered = true; |
| printf("double buffered\n"); |
| |
| memcpy(gr_framebuffer+1, gr_framebuffer, sizeof(GRSurface)); |
| gr_framebuffer[1].data = gr_framebuffer[0].data + |
| gr_framebuffer[0].height * gr_framebuffer[0].row_bytes; |
| |
| } else { |
| double_buffered = false; |
| printf("single buffered\n"); |
| } |
| #if defined(RECOVERY_BGRA) |
| printf("RECOVERY_BGRA\n"); |
| #endif |
| fb_fd = fd; |
| set_displayed_framebuffer(0); |
| |
| printf("framebuffer: %d (%d x %d)\n", fb_fd, gr_draw->width, gr_draw->height); |
| |
| fbdev_blank(backend, true); |
| fbdev_blank(backend, false); |
| |
| smem_len = fi.smem_len; |
| |
| return gr_draw; |
| } |
| |
| static GRSurface* fbdev_flip(minui_backend* backend __unused) { |
| #if defined(RECOVERY_BGRA) |
| // In case of BGRA, do some byte swapping |
| unsigned int idx; |
| unsigned char tmp; |
| unsigned char* ucfb_vaddr = (unsigned char*)gr_draw->data; |
| for (idx = 0 ; idx < (gr_draw->height * gr_draw->row_bytes); |
| idx += 4) { |
| tmp = ucfb_vaddr[idx]; |
| ucfb_vaddr[idx ] = ucfb_vaddr[idx + 2]; |
| ucfb_vaddr[idx + 2] = tmp; |
| } |
| #endif |
| #ifndef BOARD_HAS_FLIPPED_SCREEN |
| if (double_buffered) { |
| // Copy from the in-memory surface to the framebuffer. |
| memcpy(gr_framebuffer[1-displayed_buffer].data, gr_draw->data, |
| gr_draw->height * gr_draw->row_bytes); |
| set_displayed_framebuffer(1-displayed_buffer); |
| } else { |
| // Copy from the in-memory surface to the framebuffer. |
| memcpy(gr_framebuffer[0].data, gr_draw->data, |
| gr_draw->height * gr_draw->row_bytes); |
| } |
| #else |
| int gr_active_fb = 0; |
| if (double_buffered) |
| gr_active_fb = 1-displayed_buffer; |
| |
| /* flip buffer 180 degrees for devices with physically inverted screens */ |
| unsigned int row_pixels = gr_draw->row_bytes / gr_framebuffer[0].pixel_bytes; |
| if (gr_framebuffer[0].pixel_bytes == 4) { |
| for (unsigned int y = 0; y < gr_draw->height; ++y) { |
| uint32_t* dst = reinterpret_cast<uint32_t*>(gr_framebuffer[gr_active_fb].data) + y * row_pixels; |
| uint32_t* src = reinterpret_cast<uint32_t*>(gr_draw->data) + (gr_draw->height - y - 1) * row_pixels + gr_draw->width; |
| for (unsigned int x = 0; x < gr_draw->width; ++x) |
| *(dst++) = *(--src); |
| } |
| } else { |
| for (unsigned int y = 0; y < gr_draw->height; ++y) { |
| uint16_t* dst = reinterpret_cast<uint16_t*>(gr_framebuffer[gr_active_fb].data) + y * row_pixels; |
| uint16_t* src = reinterpret_cast<uint16_t*>(gr_draw->data) + (gr_draw->height - y - 1) * row_pixels + gr_draw->width; |
| for (unsigned int x = 0; x < gr_draw->width; ++x) |
| *(dst++) = *(--src); |
| } |
| } |
| |
| if (double_buffered) |
| set_displayed_framebuffer(1-displayed_buffer); |
| #endif |
| return gr_draw; |
| } |
| |
| static void fbdev_exit(minui_backend* backend __unused) { |
| close(fb_fd); |
| fb_fd = -1; |
| |
| if (gr_draw) { |
| free(gr_draw->data); |
| free(gr_draw); |
| } |
| gr_draw = NULL; |
| munmap(gr_framebuffer[0].data, smem_len); |
| } |