| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* TO DO: |
| * 1. Perhaps keep several copies of the encrypted key, in case something |
| * goes horribly wrong? |
| * |
| */ |
| |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <fcntl.h> |
| #include <unistd.h> |
| #include <stdio.h> |
| #include <sys/ioctl.h> |
| #include <linux/dm-ioctl.h> |
| #include <libgen.h> |
| #include <stdlib.h> |
| #include <sys/param.h> |
| #include <string.h> |
| #include <sys/mount.h> |
| #include <openssl/evp.h> |
| #include <openssl/sha.h> |
| #include <errno.h> |
| #include <cutils/android_reboot.h> |
| #include <ext4.h> |
| #include <linux/kdev_t.h> |
| #include "cryptfs.h" |
| #define LOG_TAG "Cryptfs" |
| #include "cutils/log.h" |
| #include "cutils/properties.h" |
| #include "hardware_legacy/power.h" |
| //#include "VolumeManager.h" |
| |
| #define DM_CRYPT_BUF_SIZE 4096 |
| #define DATA_MNT_POINT "/data" |
| |
| #define HASH_COUNT 2000 |
| #ifdef TW_INCLUDE_CRYPTO_SAMSUNG |
| #define KEY_LEN_BYTES_SAMSUNG (sizeof(edk_t)) |
| #endif |
| #define KEY_LEN_BYTES 16 |
| #define IV_LEN_BYTES 16 |
| |
| #define KEY_LOC_PROP "ro.crypto.keyfile.userdata" |
| #define KEY_IN_FOOTER "footer" |
| |
| #define EXT4_FS 1 |
| #define FAT_FS 2 |
| |
| #ifndef EXPAND |
| #define STRINGIFY(x) #x |
| #define EXPAND(x) STRINGIFY(x) |
| #endif |
| |
| char *me = "cryptfs"; |
| |
| static char *saved_data_blkdev; |
| static char *saved_mount_point; |
| static int master_key_saved = 0; |
| #ifdef TW_INCLUDE_CRYPTO_SAMSUNG |
| static int using_samsung_encryption = 0; |
| //static edk_t saved_master_key; |
| static unsigned char saved_master_key[KEY_LEN_BYTES_SAMSUNG]; |
| edk_payload_t edk_payload; |
| #else |
| static unsigned char saved_master_key[KEY_LEN_BYTES]; |
| #endif |
| |
| int cryptfs_setup_volume(const char *label, const char *real_blkdev, char *crypto_blkdev); |
| |
| |
| static void ioctl_init(struct dm_ioctl *io, size_t dataSize, const char *name, unsigned flags) |
| { |
| memset(io, 0, dataSize); |
| io->data_size = dataSize; |
| io->data_start = sizeof(struct dm_ioctl); |
| io->version[0] = 4; |
| io->version[1] = 0; |
| io->version[2] = 0; |
| io->flags = flags; |
| if (name) { |
| strncpy(io->name, name, sizeof(io->name)); |
| } |
| } |
| |
| static unsigned int get_blkdev_size(int fd) |
| { |
| unsigned int nr_sec; |
| |
| if ( (ioctl(fd, BLKGETSIZE, &nr_sec)) == -1) { |
| nr_sec = 0; |
| } |
| |
| return nr_sec; |
| } |
| |
| /* key or salt can be NULL, in which case just skip writing that value. Useful to |
| * update the failed mount count but not change the key. |
| */ |
| static int put_crypt_ftr_and_key(char *real_blk_name, struct crypt_mnt_ftr *crypt_ftr, |
| unsigned char *key, unsigned char *salt) |
| { |
| // we don't need to update it... |
| return 0; |
| } |
| |
| static int get_crypt_ftr_and_key(char *real_blk_name, struct crypt_mnt_ftr *crypt_ftr, |
| unsigned char *key, unsigned char *salt) |
| { |
| int fd; |
| unsigned int nr_sec, cnt; |
| off64_t off; |
| int rc = -1; |
| char key_loc[PROPERTY_VALUE_MAX]; |
| char *fname; |
| struct stat statbuf; |
| |
| property_get(KEY_LOC_PROP, key_loc, KEY_IN_FOOTER); |
| |
| if (!strcmp(key_loc, KEY_IN_FOOTER)) { |
| fname = real_blk_name; |
| if ( (fd = open(fname, O_RDONLY)) < 0) { |
| printf("Cannot open real block device %s\n", fname); |
| return -1; |
| } |
| |
| if ( (nr_sec = get_blkdev_size(fd)) == 0) { |
| SLOGE("Cannot get size of block device %s\n", fname); |
| goto errout; |
| } |
| |
| /* If it's an encrypted Android partition, the last 16 Kbytes contain the |
| * encryption info footer and key, and plenty of bytes to spare for future |
| * growth. |
| */ |
| off = ((off64_t)nr_sec * 512) - CRYPT_FOOTER_OFFSET; |
| |
| if (lseek64(fd, off, SEEK_SET) == -1) { |
| printf("Cannot seek to real block device footer\n"); |
| goto errout; |
| } |
| } else if (key_loc[0] == '/') { |
| fname = key_loc; |
| if ( (fd = open(fname, O_RDONLY)) < 0) { |
| printf("Cannot open footer file %s\n", fname); |
| return -1; |
| } |
| |
| /* Make sure it's 16 Kbytes in length */ |
| fstat(fd, &statbuf); |
| if (S_ISREG(statbuf.st_mode) && (statbuf.st_size != 0x4000 |
| #ifdef TW_INCLUDE_CRYPTO_SAMSUNG |
| && statbuf.st_size != 0x8000 |
| #endif |
| )) { |
| printf("footer file %s is not the expected size!\n", fname); |
| goto errout; |
| } |
| } else { |
| printf("Unexpected value for" KEY_LOC_PROP "\n"); |
| return -1;; |
| } |
| |
| if ( (cnt = read(fd, crypt_ftr, sizeof(struct crypt_mnt_ftr))) != sizeof(struct crypt_mnt_ftr)) { |
| printf("Cannot read real block device footer\n"); |
| goto errout; |
| } |
| |
| if (crypt_ftr->magic != CRYPT_MNT_MAGIC) { |
| #ifdef TW_INCLUDE_CRYPTO_SAMSUNG |
| if (crypt_ftr->magic != CRYPT_MNT_MAGIC_SAMSUNG) { |
| printf("Bad magic for real block device %s\n", fname); |
| goto errout; |
| } else { |
| printf("Using Samsung encryption.\n"); |
| using_samsung_encryption = 1; |
| if ( (cnt = read(fd, &edk_payload, sizeof(edk_payload_t))) != sizeof(edk_payload_t)) { |
| printf("Cannot read EDK payload from real block device footer\n"); |
| goto errout; |
| } |
| if (lseek64(fd, sizeof(__le32), SEEK_CUR) == -1) { |
| printf("Cannot seek past unknown data from real block device footer\n"); |
| goto errout; |
| } |
| memcpy(key, &edk_payload, sizeof(edk_payload_t)); |
| } |
| #else |
| printf("Bad magic for real block device %s\n", fname); |
| goto errout; |
| #endif |
| } |
| |
| if (crypt_ftr->major_version != 1) { |
| printf("Cannot understand major version %d real block device footer\n", |
| crypt_ftr->major_version); |
| goto errout; |
| } |
| |
| if (crypt_ftr->minor_version != 0) { |
| printf("Warning: crypto footer minor version %d, expected 0, continuing...\n", |
| crypt_ftr->minor_version); |
| } |
| |
| if (crypt_ftr->ftr_size > sizeof(struct crypt_mnt_ftr)) { |
| /* the footer size is bigger than we expected. |
| * Skip to it's stated end so we can read the key. |
| */ |
| if (lseek64(fd, crypt_ftr->ftr_size - sizeof(struct crypt_mnt_ftr), SEEK_CUR) == -1) { |
| printf("Cannot seek to start of key\n"); |
| goto errout; |
| } |
| } |
| |
| if (crypt_ftr->keysize > sizeof(saved_master_key)) { |
| printf("Keysize of %d bits not supported for real block device %s\n", |
| crypt_ftr->keysize * 8, fname); |
| goto errout; |
| } |
| |
| if ( (cnt = read(fd, key, crypt_ftr->keysize)) != crypt_ftr->keysize) { |
| printf("Cannot read key for real block device %s\n", fname); |
| goto errout; |
| } |
| |
| if (lseek64(fd, KEY_TO_SALT_PADDING, SEEK_CUR) == -1) { |
| printf("Cannot seek to real block device salt\n"); |
| goto errout; |
| } |
| |
| if ( (cnt = read(fd, salt, SALT_LEN)) != SALT_LEN) { |
| printf("Cannot read salt for real block device %s\n", fname); |
| goto errout; |
| } |
| |
| /* Success! */ |
| rc = 0; |
| |
| errout: |
| close(fd); |
| return rc; |
| } |
| |
| /* Convert a binary key of specified length into an ascii hex string equivalent, |
| * without the leading 0x and with null termination |
| */ |
| void convert_key_to_hex_ascii(unsigned char *master_key, unsigned int keysize, |
| char *master_key_ascii) |
| { |
| unsigned int i, a; |
| unsigned char nibble; |
| |
| for (i=0, a=0; i<keysize; i++, a+=2) { |
| /* For each byte, write out two ascii hex digits */ |
| nibble = (master_key[i] >> 4) & 0xf; |
| master_key_ascii[a] = nibble + (nibble > 9 ? 0x37 : 0x30); |
| |
| nibble = master_key[i] & 0xf; |
| master_key_ascii[a+1] = nibble + (nibble > 9 ? 0x37 : 0x30); |
| } |
| |
| /* Add the null termination */ |
| master_key_ascii[a] = '\0'; |
| |
| } |
| |
| static int create_crypto_blk_dev(struct crypt_mnt_ftr *crypt_ftr, unsigned char *master_key, |
| const char *real_blk_name, char *crypto_blk_name, const char *name) |
| { |
| char buffer[DM_CRYPT_BUF_SIZE]; |
| char master_key_ascii[129]; /* Large enough to hold 512 bit key and null */ |
| char *crypt_params; |
| struct dm_ioctl *io; |
| struct dm_target_spec *tgt; |
| unsigned int minor; |
| int fd; |
| int retval = -1; |
| |
| if ((fd = open("/dev/device-mapper", O_RDWR)) < 0 ) { |
| printf("Cannot open device-mapper\n"); |
| goto errout; |
| } |
| |
| io = (struct dm_ioctl *) buffer; |
| |
| ioctl_init(io, DM_CRYPT_BUF_SIZE, name, 0); |
| if (ioctl(fd, DM_DEV_CREATE, io)) { |
| printf("Cannot create dm-crypt device\n"); |
| goto errout; |
| } |
| |
| /* Get the device status, in particular, the name of it's device file */ |
| ioctl_init(io, DM_CRYPT_BUF_SIZE, name, 0); |
| if (ioctl(fd, DM_DEV_STATUS, io)) { |
| printf("Cannot retrieve dm-crypt device status\n"); |
| goto errout; |
| } |
| minor = (io->dev & 0xff) | ((io->dev >> 12) & 0xfff00); |
| snprintf(crypto_blk_name, MAXPATHLEN, "/dev/block/dm-%u", minor); |
| |
| /* Load the mapping table for this device */ |
| tgt = (struct dm_target_spec *) &buffer[sizeof(struct dm_ioctl)]; |
| |
| ioctl_init(io, 4096, name, 0); |
| io->target_count = 1; |
| tgt->status = 0; |
| tgt->sector_start = 0; |
| tgt->length = crypt_ftr->fs_size; |
| strcpy(tgt->target_type, "crypt"); |
| |
| crypt_params = buffer + sizeof(struct dm_ioctl) + sizeof(struct dm_target_spec); |
| convert_key_to_hex_ascii(master_key, crypt_ftr->keysize, master_key_ascii); |
| sprintf(crypt_params, "%s %s 0 %s 0", crypt_ftr->crypto_type_name, |
| master_key_ascii, real_blk_name); |
| //printf("cryptsetup params: '%s'\n", crypt_params); |
| crypt_params += strlen(crypt_params) + 1; |
| crypt_params = (char *) (((unsigned long)crypt_params + 7) & ~8); /* Align to an 8 byte boundary */ |
| tgt->next = crypt_params - buffer; |
| |
| if (ioctl(fd, DM_TABLE_LOAD, io)) { |
| printf("Cannot load dm-crypt mapping table.\n"); |
| goto errout; |
| } |
| |
| /* Resume this device to activate it */ |
| ioctl_init(io, 4096, name, 0); |
| |
| if (ioctl(fd, DM_DEV_SUSPEND, io)) { |
| printf("Cannot resume the dm-crypt device\n"); |
| goto errout; |
| } |
| |
| /* We made it here with no errors. Woot! */ |
| retval = 0; |
| |
| errout: |
| close(fd); /* If fd is <0 from a failed open call, it's safe to just ignore the close error */ |
| |
| return retval; |
| } |
| |
| static int delete_crypto_blk_dev(const char *name) |
| { |
| int fd; |
| char buffer[DM_CRYPT_BUF_SIZE]; |
| struct dm_ioctl *io; |
| int retval = -1; |
| |
| if ((fd = open("/dev/device-mapper", O_RDWR)) < 0 ) { |
| printf("Cannot open device-mapper\n"); |
| goto errout; |
| } |
| |
| io = (struct dm_ioctl *) buffer; |
| |
| ioctl_init(io, DM_CRYPT_BUF_SIZE, name, 0); |
| if (ioctl(fd, DM_DEV_REMOVE, io)) { |
| printf("Cannot remove dm-crypt device\n"); |
| goto errout; |
| } |
| |
| /* We made it here with no errors. Woot! */ |
| retval = 0; |
| |
| errout: |
| close(fd); /* If fd is <0 from a failed open call, it's safe to just ignore the close error */ |
| |
| return retval; |
| |
| } |
| |
| static void pbkdf2(char *passwd, unsigned char *salt, unsigned char *ikey) |
| { |
| /* Turn the password into a key and IV that can decrypt the master key */ |
| PKCS5_PBKDF2_HMAC_SHA1(passwd, strlen(passwd), salt, SALT_LEN, |
| HASH_COUNT, KEY_LEN_BYTES+IV_LEN_BYTES, ikey); |
| } |
| |
| static int decrypt_master_key(char *passwd, unsigned char *salt, |
| unsigned char *encrypted_master_key, |
| unsigned char *decrypted_master_key) |
| { |
| #ifdef TW_INCLUDE_CRYPTO_SAMSUNG |
| if (using_samsung_encryption) { |
| property_set("rw.km_fips_status", "ready"); |
| return decrypt_EDK((dek_t*)decrypted_master_key, (edk_payload_t*)encrypted_master_key, passwd); |
| } |
| #endif |
| |
| unsigned char ikey[32+32] = { 0 }; /* Big enough to hold a 256 bit key and 256 bit IV */ |
| EVP_CIPHER_CTX d_ctx; |
| int decrypted_len, final_len; |
| |
| /* Turn the password into a key and IV that can decrypt the master key */ |
| pbkdf2(passwd, salt, ikey); |
| |
| /* Initialize the decryption engine */ |
| if (! EVP_DecryptInit(&d_ctx, EVP_aes_128_cbc(), ikey, ikey+KEY_LEN_BYTES)) { |
| return -1; |
| } |
| EVP_CIPHER_CTX_set_padding(&d_ctx, 0); /* Turn off padding as our data is block aligned */ |
| /* Decrypt the master key */ |
| if (! EVP_DecryptUpdate(&d_ctx, decrypted_master_key, &decrypted_len, |
| encrypted_master_key, KEY_LEN_BYTES)) { |
| return -1; |
| } |
| if (! EVP_DecryptFinal(&d_ctx, decrypted_master_key + decrypted_len, &final_len)) { |
| return -1; |
| } |
| |
| if (decrypted_len + final_len != KEY_LEN_BYTES) { |
| return -1; |
| } else { |
| return 0; |
| } |
| } |
| |
| static int get_orig_mount_parms( |
| const char *mount_point, char *fs_type, char *real_blkdev, |
| unsigned long *mnt_flags, char *fs_options) |
| { |
| char mount_point2[PROPERTY_VALUE_MAX]; |
| char fs_flags[PROPERTY_VALUE_MAX]; |
| |
| property_get("ro.crypto.fs_type", fs_type, ""); |
| property_get("ro.crypto.fs_real_blkdev", real_blkdev, ""); |
| property_get("ro.crypto.fs_mnt_point", mount_point2, ""); |
| property_get("ro.crypto.fs_options", fs_options, ""); |
| property_get("ro.crypto.fs_flags", fs_flags, ""); |
| *mnt_flags = strtol(fs_flags, 0, 0); |
| |
| if (strcmp(mount_point, mount_point2)) { |
| /* Consistency check. These should match. If not, something odd happened. */ |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int get_orig_mount_parms_sd( |
| const char *mount_point, char *fs_type, char *real_blkdev) |
| { |
| char mount_point2[PROPERTY_VALUE_MAX]; |
| |
| property_get("ro.crypto.sd_fs_type", fs_type, ""); |
| property_get("ro.crypto.sd_fs_real_blkdev", real_blkdev, ""); |
| property_get("ro.crypto.sd_fs_mnt_point", mount_point2, ""); |
| |
| if (strcmp(mount_point, mount_point2)) { |
| /* Consistency check. These should match. If not, something odd happened. */ |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int test_mount_encrypted_fs( |
| char *passwd, char *mount_point, char *label, char *crypto_blkdev) |
| { |
| struct crypt_mnt_ftr crypt_ftr; |
| /* Allocate enough space for a 256 bit key, but we may use less */ |
| unsigned char encrypted_master_key[256], decrypted_master_key[32]; |
| unsigned char salt[SALT_LEN]; |
| char real_blkdev[MAXPATHLEN]; |
| char fs_type[PROPERTY_VALUE_MAX]; |
| char fs_options[PROPERTY_VALUE_MAX]; |
| char tmp_mount_point[MAXPATHLEN]; |
| unsigned long mnt_flags; |
| unsigned int orig_failed_decrypt_count; |
| char encrypted_state[PROPERTY_VALUE_MAX]; |
| int rc; |
| |
| property_get("ro.crypto.state", encrypted_state, ""); |
| if ( master_key_saved || strcmp(encrypted_state, "encrypted") ) { |
| printf("encrypted fs already validated or not running with encryption, aborting %s\n", encrypted_state); |
| return -1; |
| } |
| |
| if (get_orig_mount_parms(mount_point, fs_type, real_blkdev, &mnt_flags, fs_options)) { |
| printf("Error reading original mount parms for mount point %s\n", mount_point); |
| return -1; |
| } |
| |
| if (get_crypt_ftr_and_key(real_blkdev, &crypt_ftr, encrypted_master_key, salt)) { |
| printf("Error getting crypt footer and key\n"); |
| return -1; |
| } |
| |
| //printf("crypt_ftr->fs_size = %lld\n", crypt_ftr.fs_size); |
| orig_failed_decrypt_count = crypt_ftr.failed_decrypt_count; |
| |
| if (! (crypt_ftr.flags & CRYPT_MNT_KEY_UNENCRYPTED) ) { |
| decrypt_master_key(passwd, salt, encrypted_master_key, decrypted_master_key); |
| } |
| |
| if (create_crypto_blk_dev(&crypt_ftr, decrypted_master_key, real_blkdev, |
| crypto_blkdev, label)) { |
| printf("Error creating decrypted block device\n"); |
| return -1; |
| } |
| |
| /* If init detects an encrypted filesystme, it writes a file for each such |
| * encrypted fs into the tmpfs /data filesystem, and then the framework finds those |
| * files and passes that data to me */ |
| /* Create a tmp mount point to try mounting the decryptd fs |
| * Since we're here, the mount_point should be a tmpfs filesystem, so make |
| * a directory in it to test mount the decrypted filesystem. |
| */ |
| sprintf(tmp_mount_point, "%s/tmp_mnt", mount_point); |
| mkdir(tmp_mount_point, 0755); |
| if ( mount(crypto_blkdev, tmp_mount_point, fs_type, MS_RDONLY, "") ) { |
| printf("Error temp mounting decrypted block device\n"); |
| delete_crypto_blk_dev(label); |
| crypt_ftr.failed_decrypt_count++; |
| } else { |
| /* Success, so just umount and we'll mount it properly when we restart |
| * the framework. |
| */ |
| umount(tmp_mount_point); |
| crypt_ftr.failed_decrypt_count = 0; |
| } |
| |
| rmdir(tmp_mount_point); |
| |
| if (crypt_ftr.failed_decrypt_count) { |
| /* We failed to mount the device, so return an error */ |
| rc = crypt_ftr.failed_decrypt_count; |
| |
| } else { |
| /* Woot! Success! Save the name of the crypto block device |
| * so we can mount it when restarting the framework. |
| */ |
| property_set("ro.crypto.fs_crypto_blkdev", crypto_blkdev); |
| |
| /* Also save a the master key so we can reencrypted the key |
| * the key when we want to change the password on it. |
| */ |
| memcpy(saved_master_key, decrypted_master_key, sizeof(saved_master_key)); |
| saved_data_blkdev = strdup(real_blkdev); |
| saved_mount_point = strdup(mount_point); |
| master_key_saved = 1; |
| rc = 0; |
| } |
| |
| return rc; |
| } |
| |
| static int test_mount_encrypted_fs_sd( |
| const char *passwd, const char *mount_point, const char *label) |
| { |
| char real_blkdev[MAXPATHLEN]; |
| char crypto_blkdev[MAXPATHLEN]; |
| char tmp_mount_point[MAXPATHLEN]; |
| char encrypted_state[PROPERTY_VALUE_MAX]; |
| char fs_type[PROPERTY_VALUE_MAX]; |
| int rc; |
| |
| property_get("ro.crypto.state", encrypted_state, ""); |
| if ( !master_key_saved || strcmp(encrypted_state, "encrypted") ) { |
| printf("encrypted fs not yet validated or not running with encryption, aborting\n"); |
| return -1; |
| } |
| |
| if (get_orig_mount_parms_sd(mount_point, fs_type, real_blkdev)) { |
| printf("Error reading original mount parms for mount point %s\n", mount_point); |
| return -1; |
| } |
| |
| rc = cryptfs_setup_volume(label, real_blkdev, crypto_blkdev); |
| if(rc){ |
| printf("Error setting up cryptfs volume %s\n", real_blkdev); |
| return -1; |
| } |
| |
| sprintf(tmp_mount_point, "%s/tmp_mnt", mount_point); |
| mkdir(tmp_mount_point, 0755); |
| if ( mount(crypto_blkdev, tmp_mount_point, fs_type, MS_RDONLY, "") ) { |
| printf("Error temp mounting decrypted block device\n"); |
| delete_crypto_blk_dev(label); |
| } else { |
| /* Success, so just umount and we'll mount it properly when we restart |
| * the framework. |
| */ |
| umount(tmp_mount_point); |
| |
| property_set("ro.crypto.sd_fs_crypto_blkdev", crypto_blkdev); |
| } |
| |
| rmdir(tmp_mount_point); |
| |
| return rc; |
| } |
| |
| /* |
| * Called by vold when it's asked to mount an encrypted, nonremovable volume. |
| * Setup a dm-crypt mapping, use the saved master key from |
| * setting up the /data mapping, and return the new device path. |
| */ |
| int cryptfs_setup_volume(const char *label, const char *real_blkdev, char *crypto_blkdev) |
| { |
| struct crypt_mnt_ftr sd_crypt_ftr; |
| unsigned char key[256], salt[32]; |
| struct stat statbuf; |
| int nr_sec, fd, rc; |
| |
| /* Just want the footer, but gotta get it all */ |
| get_crypt_ftr_and_key(saved_data_blkdev, &sd_crypt_ftr, key, salt); |
| |
| /* Update the fs_size field to be the size of the volume */ |
| fd = open(real_blkdev, O_RDONLY); |
| nr_sec = get_blkdev_size(fd); |
| close(fd); |
| if (nr_sec == 0) { |
| SLOGE("Cannot get size of volume %s\n", real_blkdev); |
| return -1; |
| } |
| |
| #ifdef TW_INCLUDE_CRYPTO_SAMSUNG |
| if(using_samsung_encryption) { |
| if(!access("/efs/essiv", R_OK)){ |
| strcpy(sd_crypt_ftr.crypto_type_name, "aes-cbc-plain:sha1"); |
| } |
| else if(!access("/efs/cryptprop_essiv", R_OK)){ |
| strcpy(sd_crypt_ftr.crypto_type_name, "aes-cbc-essiv:sha256"); |
| } |
| } |
| #endif |
| |
| sd_crypt_ftr.fs_size = nr_sec; |
| rc = create_crypto_blk_dev( |
| &sd_crypt_ftr, saved_master_key, real_blkdev, crypto_blkdev, label); |
| |
| stat(crypto_blkdev, &statbuf); |
| |
| return rc; |
| } |
| |
| int cryptfs_crypto_complete(void) |
| { |
| return -1; |
| } |
| |
| int cryptfs_check_passwd(const char *passwd) |
| { |
| char pwbuf[256]; |
| char crypto_blkdev_data[MAXPATHLEN]; |
| int rc = -1; |
| |
| strcpy(pwbuf, passwd); |
| rc = test_mount_encrypted_fs(pwbuf, DATA_MNT_POINT, "userdata", crypto_blkdev_data); |
| |
| #ifdef TW_INCLUDE_CRYPTO_SAMSUNG |
| if(using_samsung_encryption) { |
| |
| int rc2 = 1; |
| #ifndef RECOVERY_SDCARD_ON_DATA |
| #ifdef TW_INTERNAL_STORAGE_PATH |
| // internal storage for non data/media devices |
| if(!rc) { |
| strcpy(pwbuf, passwd); |
| rc2 = test_mount_encrypted_fs_sd( |
| pwbuf, EXPAND(TW_INTERNAL_STORAGE_PATH), |
| EXPAND(TW_INTERNAL_STORAGE_MOUNT_POINT)); |
| } |
| #endif |
| #endif |
| #ifdef TW_EXTERNAL_STORAGE_PATH |
| printf("Temp mounting /data\n"); |
| // mount data so mount_ecryptfs_drive can access edk in /data/system/ |
| rc2 = mount(crypto_blkdev_data, DATA_MNT_POINT, CRYPTO_FS_TYPE, MS_RDONLY, ""); |
| // external sd |
| char decrypt_external[256], external_blkdev[256]; |
| property_get("ro.crypto.external_encrypted", decrypt_external, "0"); |
| // Mount the external storage as ecryptfs so that ecryptfs can act as a pass-through |
| if (!rc2 && strcmp(decrypt_external, "1") == 0) { |
| printf("Mounting external with ecryptfs...\n"); |
| strcpy(pwbuf, passwd); |
| rc2 = mount_ecryptfs_drive( |
| pwbuf, EXPAND(TW_EXTERNAL_STORAGE_PATH), |
| EXPAND(TW_EXTERNAL_STORAGE_PATH), 0); |
| if (rc2 == 0) |
| property_set("ro.crypto.external_use_ecryptfs", "1"); |
| else |
| property_set("ro.crypto.external_use_ecryptfs", "0"); |
| } else { |
| printf("Unable to mount external storage with ecryptfs.\n"); |
| umount(EXPAND(TW_EXTERNAL_STORAGE_PATH)); |
| } |
| umount(DATA_MNT_POINT); |
| } |
| #endif // #ifdef TW_EXTERNAL_STORAGE_PATH |
| #endif // #ifdef TW_INCLUDE_CRYPTO_SAMSUNG |
| return rc; |
| } |