| <?xml version="1.0"?> |
| |
| <language> |
| <display>Chinese Traditional</display> |
| |
| <resources> |
| <!-- Font overrides - only change these if your language requires special characters --> |
| <resource name="font_l" type="fontoverride" filename="DroidSansFallback.ttf" scale="100" /> |
| <resource name="font_m" type="fontoverride" filename="DroidSansFallback.ttf" scale="100" /> |
| <resource name="font_s" type="fontoverride" filename="DroidSansFallback.ttf" scale="100" /> |
| <resource name="fixed" type="fontoverride" filename="DroidSansFallback.ttf" scale="100" /> |
| |
| <!-- Partition display names --> |
| <string name="system">System</string> |
| <string name="system_image">System鏡像</string> |
| <string name="vendor">Vendor</string> |
| <string name="vendor_image">Vendor鏡像</string> |
| <string name="boot">Boot</string> |
| <string name="recovery">Recovery</string> |
| <string name="cache">Cache</string> |
| <string name="data">Data</string> |
| <string name="sdcard">SDCard</string> |
| <string name="internal">內置存儲</string> |
| <string name="microsd">SD卡</string> |
| <string name="usbotg">外置U盤</string> |
| <string name="android_secure">Android Secure</string> |
| <string name="dalvik">Dalvik / ART Cache</string> |
| <!-- This is a rarely used partition on a Micro SD card for a very old app2sd system --> |
| <string name="sdext">SD-EXT</string> |
| <string name="adopted_data">Adopted Data</string> |
| <string name="adopted_storage">Adopted 存儲</string> |
| |
| <!-- GUI XML strings --> |
| <string name="twrp_header">Team Win Recovery Project</string> |
| <string name="twrp_watch_header">TWRP %tw_version%</string> |
| <string name="cpu_temp">溫度：%tw_cpu_temp% °C</string> |
| <string name="battery_pct">電量：%tw_battery%</string> |
| <string name="sort_by_name">按名稱排序</string> |
| <string name="sort_by_date">按日期排序</string> |
| <string name="sort_by_size">按大小排序</string> |
| <string name="sort_by_name_only">名稱</string> |
| <string name="sort_by_date_only">日期</string> |
| <string name="sort_by_size_only">大小</string> |
| <string name="tab_general">常規</string> |
| <string name="tab_options">選項</string> |
| <string name="tab_backup">備份</string> |
| <string name="tab_time_zone">時區</string> |
| <string name="tab_screen">螢幕</string> |
| <string name="tab_vibration">振動</string> |
| <string name="tab_language">語言</string> |
| |
| <string name="install_btn">安裝</string> |
| <string name="wipe_btn">清除</string> |
| <string name="backup_btn">備份</string> |
| <string name="restore_btn">恢復</string> |
| <string name="mount_btn">掛載</string> |
| <string name="settings_btn">設置</string> |
| <string name="advanced_btn">高級</string> |
| <string name="reboot_btn">重啟</string> |
| <string name="files_btn">檔案</string> |
| <string name="copy_log_btn">導出日誌</string> |
| <string name="select_type_hdr">選擇類型</string> |
| <string name="install_zip_hdr">安裝Zip包</string> |
| <string name="install_zip_btn">安裝Zip包</string> |
| <string name="install_image_hdr">刷入Image鏡像</string> |
| <string name="install_image_btn">刷入鏡像</string> |
| <string name="install_select_file_hdr">選擇檔案</string> |
| <string name="file_selector_folders_hdr">目錄</string> |
| <string name="select_file_from_storage">從%tw_storage_display_name% (%tw_storage_free_size% MB)中選擇檔案</string> |
| <string name="adb_sideload_btn">ADB Sideload</string> |
| <string name="install_hdr">安裝</string> |
| <string name="select_storage_hdr">存儲位置</string> |
| <string name="select_storage_btn">存儲位置</string> |
| <string name="queue_hdr">佇列</string> |
| <string name="zip_queue_count">已選%tw_zip_queue_count%個檔案（最多10個）</string> |
| <string name="zip_queue_count_s">已選%tw_zip_queue_count%個，最多10個：</string> |
| <string name="zip_warn1">此操作可能會刷入不相容的固件，</string> |
| <string name="zip_warn2">致使您的設備變磚。</string> |
| <string name="zip_back_cancel">按返回按鈕取消添加此Zip包。</string> |
| <string name="zip_back_clear">按返回按鈕清除Zip刷入隊列。</string> |
| <string name="folder">目錄:</string> |
| <string name="file">檔案:</string> |
| <string name="zip_sig_chk">Zip刷機包簽名校驗</string> |
| <string name="inject_twrp_chk">安裝完成後注入TWRP</string> |
| <string name="options_hdr">選項</string> |
| <string name="confirm_flash_hdr">確認刷入</string> |
| <string name="zip_queue">佇列：</string> |
| <string name="options">選項：</string> |
| <string name="swipe_confirm"> 確認</string> |
| <string name="zip_add_btn">添加更多刷機包</string> |
| <string name="zip_clear_btn">清除刷機佇列</string> |
| <string name="install_zip_count_hdr">正在刷入第%tw_zip_queue_count%個，共%tw_zip_index%個刷機包</string> |
| <string name="installing_zip_xml">正在安裝: %tw_file%</string> |
| <string name="failed">失敗</string> |
| <string name="successful">成功</string> |
| <string name="install_failed">安裝失敗</string> |
| <string name="install_successful">安裝成功</string> |
| <string name="wipe_cache_dalvik_btn">清除cache/dalvik</string> |
| <string name="reboot_system_btn">重啟系統</string> |
| <string name="install_sel_target">選擇目標分區</string> |
| <string name="flash_image_select">選擇要刷入鏡像的分區：</string> |
| <string name="target_partition">目標分區：</string> |
| <string name="flashing_image">正在刷入鏡像…</string> |
| <string name="image_flashed">鏡像已刷入。</string> |
| <string name="wipe_cache_dalvik_confirm">是否清除Cache和Dalvik？</string> |
| <string name="wiping_cache_dalvik">正在清除Cache和Dalvik…</string> |
| <string name="wipe_cache_dalvik_complete">Cache和Dalvik清除完成。</string> |
| <string name="swipe_wipe">滑動按鈕確認清除</string> |
| <string name="swipe_wipe_s"> 清除</string> |
| <string name="no_os1">沒有安裝任何系統！</string> |
| <string name="no_osrb">您確定要重啟？</string> |
| <string name="no_ospo">您確定要關機？</string> |
| <string name="rebooting">正在重啟…</string> |
| <string name="swipe_reboot">滑動按鈕確認重啟</string> |
| <string name="swipe_reboot_s"> 重啟</string> |
| <string name="swipe_flash">滑動按鈕確認刷入</string> |
| <string name="confirm_action">確認操作</string> |
| <string name="back_cancel">按返回按鈕取消。</string> |
| <string name="cancel_btn">取消</string> |
| <string name="wipe_hdr">清除</string> |
| <string name="factory_reset_hdr">恢復出廠設置(雙清)</string> |
| <string name="factory_reset_btn">恢復出廠</string> |
| <string name="factory_reset1">這將會清空 Data、Cache分區和Dalvik緩存</string> |
| <string name="factory_reset2">(不會清除內置存儲/sdcard)</string> |
| <string name="factory_reset3">在大多數情況下，您只需要</string> |
| <string name="factory_reset4">執行此操作即可。</string> |
| <string name="factory_resetting">正在恢復出廠設置…</string> |
| <string name="advanced_wipe_hdr">高級清除選項</string> |
| <string name="advanced_wipe_btn">高級清除</string> |
| <string name="wipe_enc_confirm">是否清除Data分區加密？</string> |
| <string name="formatting_data">正在格式化Data分區…</string> |
| <string name="swipe_format_data">滑動按鈕確認格式化</string> |
| <string name="swipe_format_data_s"> 格式化Data分區</string> |
| <string name="factory_reset_complete">恢復出廠完成。</string> |
| <string name="sel_part_hdr">選擇分區</string> |
| <string name="wipe_sel_confirm">是否清除所選的分區？</string> |
| <string name="wiping_part">正在清除分區…</string> |
| <string name="wipe_complete">清除完成。</string> |
| <string name="sel_part_wipe">選擇要清除的分區：</string> |
| <string name="invalid_part_sel">無效的分區</string> |
| <string name="format_data_hdr">格式化Data分區</string> |
| <string name="format_data_btn">格式化Data分區</string> |
| <string name="format_data_ptr1">格式化 Data 分區將會清空您安裝的所有</string> |
| <string name="format_data_ptr2">軟體、圖片、視頻媒體、短信和通話記錄</string> |
| <string name="format_data_ptr3">以及對內置存儲所做的加密等。</string> |
| <string name="format_data_adopted">包括Adopted存儲</string> |
| <string name="format_data_lcp1">格式化 Data 分區將會清空您安裝的所有軟體、圖片、視頻媒體、短信和通話記錄</string> |
| <string name="format_data_lcp2">以及對內置存儲所做的加密等。</string> |
| <string name="format_data_wtc1">格式化Data分區會清除您的所有軟體</string> |
| <string name="format_data_wtc2">備份和媒體數據，無法撤銷。</string> |
| <string name="format_data_undo">執行此操作後將無法恢復。</string> |
| <string name="format_data_complete">格式化Data分區完成</string> |
| <string name="yes_continue">輸入 yes 繼續，按返回按鈕取消。</string> |
| <string name="part_opt_hdr">分區名：%tw_partition_name%</string> |
| <string name="sel_act_hdr">選擇操作</string> |
| <string name="file_sys_opt">檔案系統選項</string> |
| <string name="partition">分區：%tw_partition_name%</string> |
| <string name="part_mount_point">掛載位置：%tw_partition_mount_point%</string> |
| <string name="part_curr_fs">檔案系統：%tw_partition_file_system%</string> |
| <string name="part_present_yes">當前：是</string> |
| <string name="part_present_no">當前：否</string> |
| <string name="part_removable_yes">可移除：是</string> |
| <string name="part_removable_no">可移除：否</string> |
| <string name="part_size">大小：%tw_partition_size%MB</string> |
| <string name="part_used">已用：%tw_partition_used%MB</string> |
| <string name="part_free">空閒：%tw_partition_free%MB</string> |
| <string name="part_backup_size">備份大小：%tw_partition_backup_size%MB</string> |
| <string name="resize_btn">調整檔案系統</string> |
| <string name="resize_btn_s">調整</string> |
| <string name="resize_confirm">是否調整%tw_partition_name%？</string> |
| <string name="resizing">正在調整…</string> |
| <string name="resize_complete">調整完成。</string> |
| <string name="swipe_resize">滑動按鈕確認調整</string> |
| <string name="swipe_resize_s"> 調整</string> |
| <string name="repair_btn">修復檔案系統</string> |
| <string name="repair_btn_s">修復</string> |
| <string name="repair_confirm">是否修復%tw_partition_name%？</string> |
| <string name="repairing">正在修復…</string> |
| <string name="repair_complete">修復完成。</string> |
| <string name="swipe_repair">滑動按鈕確認修復</string> |
| <string name="swipe_repair_s"> 修復</string> |
| <string name="change_fs_btn">更改檔案系統</string> |
| <string name="change_fs_btn_s">更改</string> |
| <string name="change_fs_for_hdr">要更改的分區：%tw_partition_name%</string> |
| <string name="change_fs_for_hdr_s">分區：%tw_partition_name% >選擇檔案系統</string> |
| <string name="change_fs_warn1">一些固件或內核可能不支持</string> |
| <string name="change_fs_warn2">某些檔案系統，請謹慎！</string> |
| <string name="change_fs_confirm">是否更改%tw_partition_name%為：</string> |
| <string name="formatting">正在格式化…</string> |
| <string name="format_complete">格式化完成。</string> |
| <string name="swipe_change_fs">滑動按鈕確認更改</string> |
| <string name="swipe_change_s"> 更改</string> |
| <string name="back_btn">返回</string> |
| <string name="wipe_enc_btn">清除加密</string> |
| <string name="swipe_factory_reset">滑動按鈕確認恢復出廠</string> |
| <string name="repair_change_btn">修復或更改檔案系統</string> |
| <string name="storage_hdr">存儲位置：%tw_storage_display_name% (%tw_storage_free_size% MB)</string> |
| <string name="backup_hdr">備份</string> |
| <string name="backup_confirm_hdr">確認備份</string> |
| <string name="encryption_tab">加密</string> |
| <string name="encryption">加密：</string> |
| <string name="name">名稱：</string> |
| <string name="sel_part_backup">選擇要備份的分區：</string> |
| <string name="storage">儲存位置：</string> |
| <string name="enc_disabled">已禁用 - 設置密碼以啟用</string> |
| <string name="enc_enabled">已啟用</string> |
| <string name="enable_backup_comp_chk">啟用壓縮</string> |
| <string name="skip_md5_backup_chk">當備份時跳過生成MD5</string> |
| <string name="disable_backup_space_chk">禁用剩餘空間檢查</string> |
| <string name="refresh_sizes_btn">刷新大小</string> |
| <string name="swipe_backup">滑動按鈕確認備份</string> |
| <string name="append_date_btn">附加日期</string> |
| <string name="backup_name_exists">使用該名稱的備份已經存在！</string> |
| <string name="encrypt_backup">是否加密備份？</string> |
| <string name="enter_pass">請輸入密碼：</string> |
| <string name="enter_pass2">請再輸入一遍：</string> |
| <string name="pass_not_match">密碼不匹配！</string> |
| <string name="partitions">分區：</string> |
| <string name="disabled">已禁用</string> |
| <string name="enabled">已啟用</string> |
| <string name="backup_name_hdr">設置備份名稱</string> |
| <string name="progress">進度：</string> |
| <string name="backup_complete">備份完成。</string> |
| <string name="restore_hdr">恢復</string> |
| <string name="sel_backup_hdr">選擇備份</string> |
| <string name="restore_sel_store_hdr">從%tw_storage_display_name% (%tw_storage_free_size% MB)中選擇備份</string> |
| <string name="restore_sel_pack_fs">選擇要恢復的備份包：</string> |
| <string name="restore_enc_backup_hdr">備份已被加密</string> |
| <string name="restore_dec_fail">密碼錯誤，請重試</string> |
| <string name="del_backup_btn">刪除備份</string> |
| <string name="del_backup_confirm">是否刪除備份：</string> |
| <string name="del_backup_confirm2">此操作無法恢復！</string> |
| <string name="deleting_backup">正在刪除備份…</string> |
| <string name="backup_deleted">備份刪除完成。</string> |
| <string name="swipe_delete">滑動按鈕確認刪除</string> |
| <string name="swipe_delete_s"> 刪除</string> |
| <string name="restore_try_decrypt">加密的備份 - 嘗試解密</string> |
| <string name="restore_try_decrypt_s">正在嘗試解密</string> |
| <string name="restore_backup_date">備份於%tw_restore_file_date%</string> |
| <string name="restore_sel_part">選擇要恢復的分區：</string> |
| <string name="restore_enable_md5_chk">啟用MD5驗證備份檔案</string> |
| <string name="restore_complete">恢復完成。</string> |
| <string name="swipe_restore">滑動按鈕確認恢復</string> |
| <string name="swipe_restore_s"> 恢復</string> |
| <string name="rename_backup_hdr">重命名備份</string> |
| <string name="rename_backup_confirm">是否重命名備份檔案？</string> |
| <string name="rename_backup_confirm2">此操作無法恢復！</string> |
| <string name="renaming_backup">正在重命名…</string> |
| <string name="rename_backup_complete">重命名完成。</string> |
| <string name="swipe_to_rename">滑動按鈕確認重命名</string> |
| <string name="swipe_rename"> 重命名</string> |
| <string name="confirm_hdr">確認</string> |
| <string name="mount_hdr">掛載</string> |
| <string name="mount_sel_part">選擇要掛載的分區：</string> |
| <string name="mount_sys_ro_chk">掛載系統為只讀</string> |
| <string name="mount_sys_ro_s_chk">掛載System分區為只讀</string> |
| <string name="decrypt_data_btn">解密Data分區</string> |
| <string name="disable_mtp_btn">啟用 MTP 模式</string> |
| <string name="enable_mtp_btn">停用 MTP 模式</string> |
| <string name="mount_usb_storage_btn">掛載USB存儲</string> |
| <string name="usb_storage_hdr">USB存儲</string> |
| <string name="usb_stor_mnt1">已掛載 USB 存儲</string> |
| <string name="usb_stor_mnt2">請確認解除掛載前先從</string> |
| <string name="usb_stor_mnt3">電腦上安全的移除設備！</string> |
| <string name="unmount_btn">卸載</string> |
| <string name="rb_system_btn">系統</string> |
| <string name="rb_poweroff_btn">關機</string> |
| <string name="rb_recovery_btn">Recovery</string> |
| <string name="rb_bootloader_btn">Fastboot</string> |
| <string name="rb_download_btn">Download</string> |
| <string name="turning_off">正在關機…</string> |
| <string name="swipe_power_off">滑動按鈕確認關機</string> |
| <string name="swipe_power_off_s">關機</string> |
| <string name="sys_ro_hdr">未修改的System分區</string> |
| <string name="sys_ro_keep">是否保持系統分區為只讀？</string> |
| <string name="sys_rop1">TWRP可以保持系統分區未修改狀態</string> |
| <string name="sys_rop2">使您更容易獲得官方的更新。</string> |
| <string name="sys_rop3">TWRP將無法禁止原版固件可能</string> |
| <string name="sys_rop4">替換TWRP並且不能Root您的設備。</string> |
| <string name="sys_rop5">安裝刷機包或者通過adb操作依然可以</string> |
| <string name="sys_rop6">修改系統分區。</string> |
| <string name="sys_rol1">TWRP可以保持系統分區為未修改狀態，使您更容易獲得官方的更新。</string> |
| <string name="sys_rol2">TWRP將無法禁止原版固件替換TWRP，並且不能Root您的設備。</string> |
| <string name="sys_rol3">安裝刷機包或者通過adb操作依然可以修改系統分區。</string> |
| <string name="sys_ro_never_show_chk">下次啟動時不再顯示此介面</string> |
| <string name="sys_ro_keep_ro_btn">保持只讀</string> |
| <string name="swipe_allow_mod">滑動按鈕允許修改</string> |
| <string name="swipe_allow_mod_s">允許修改</string> |
| <string name="settings_hdr">設置</string> |
| <string name="settings_gen_hdr">常規設置</string> |
| <string name="settings_gen_s_hdr">常規設置</string> |
| <string name="settings_gen_btn">常規</string> |
| <string name="use_rmrf_chk">使用rm -rf命令代替格式化</string> |
| <string name="use24clock_chk">使用24小時格式</string> |
| <string name="rev_navbar_chk">反轉底部按鈕佈局</string> |
| <string name="simact_chk">為測試主題使用模擬操作</string> |
| <string name="simfail_chk">模擬失敗操作</string> |
| <string name="ctr_navbar_rdo">導航欄按鈕居中</string> |
| <string name="lft_navbar_rdo">導航欄按鈕左對齊</string> |
| <string name="rht_navbar_rdo">導航欄按鈕右對齊</string> |
| <string name="restore_defaults_btn">恢復默認設置</string> |
| <string name="settings_tz_btn">時區</string> |
| <string name="settings_screen_btn">螢幕</string> |
| <string name="settings_screen_bright_btn">螢幕亮度</string> |
| <string name="settings_vibration_btn">振動</string> |
| <string name="settings_language_btn">語言</string> |
| <string name="time_zone_hdr">時區設置</string> |
| <string name="sel_tz_list">選擇時區：</string> |
| <!-- Translator note: if it does not make sense to translate the locations or if it makes more sense, |
| feel free to change the location listed or drop the location entirely and just call it UTC -6 --> |
| <string name="utcm11">(UTC -11) 薩摩亞，中途島</string> |
| <string name="utcm10">(UTC -10) 夏威夷</string> |
| <string name="utcm9">(UTC -9) 阿拉斯加</string> |
| <string name="utcm8">(UTC -8) 太平洋時間</string> |
| <string name="utcm7">(UTC -7) 山地時間</string> |
| <string name="utcm6">(UTC -6) 中部時間</string> |
| <string name="utcm5">(UTC -5) 東部時間</string> |
| <string name="utcm4">(UTC -4) 大西洋時間</string> |
| <string name="utcm3">(UTC -3) 巴西，布宜諾斯艾利斯</string> |
| <string name="utcm2">(UTC -2) 大西洋中部</string> |
| <string name="utcm1">(UTC -1) 亞速爾群島、佛得角</string> |
| <string name="utc0">(UTC 0) 倫敦，都柏林，里斯本</string> |
| <string name="utcp1">(UTC +1) 柏林、布魯塞爾、巴黎</string> |
| <string name="utcp2">(UTC +2) 雅典，伊斯坦布爾，南非</string> |
| <string name="utcp3">(UTC +3) 莫斯科，巴格達</string> |
| <string name="utcp4">(UTC +4) 阿布扎比，第比利斯，馬斯喀特</string> |
| <string name="utcp5">(UTC +5) 葉卡捷琳堡，伊斯蘭堡</string> |
| <string name="utcp6">(UTC +6) 阿拉木圖，達卡，可倫坡</string> |
| <string name="utcp7">(UTC +7) 曼谷，河內，雅加達</string> |
| <string name="utcp8">(UTC +8) 北京，新加坡，香港</string> |
| <string name="utcp9">(UTC +9) 東京，首爾，雅庫茨克</string> |
| <string name="utcp10">(UTC +10) 澳大利亞東部，關島</string> |
| <string name="utcp11">(UTC +11) 符拉迪沃斯托克，所羅門群島</string> |
| <string name="utcp12">(UTC +12) 奧克蘭，惠靈頓，斐濟</string> |
| <string name="sel_tz_offset">時間偏差(通常為0)：%tw_time_zone_guioffset%</string> |
| <string name="tz_offset_none">無</string> |
| <string name="tz_offset_0">0分鐘</string> |
| <string name="tz_offset_15">15分鐘</string> |
| <string name="tz_offset_30">30分鐘</string> |
| <string name="tz_offset_45">45分鐘</string> |
| <string name="use_dst_chk">使用夏令時(DST)</string> |
| <string name="curr_tz">當前時區：%tw_time_zone%</string> |
| <string name="curr_tz_s">當前時區：</string> |
| <string name="set_tz_btn">設置時區</string> |
| <string name="settings_screen_hdr">螢幕設置</string> |
| <string name="settings_screen_timeout_hdr">螢幕超時</string> |
| <string name="enable_timeout_chk">啟用螢幕超時</string> |
| <string name="screen_to_slider">螢幕超時時間(秒)：</string> |
| <string name="screen_to_slider_s">螢幕超時時間(0=禁用)：%tw_screen_timeout_secs%</string> |
| <string name="screen_to_na">螢幕超時設置不可用</string> |
| <string name="screen_bright_slider">螢幕亮度：%tw_brightness_pct%%</string> |
| <string name="screen_bright_na">螢幕亮度設置不可用</string> |
| <string name="vibration_hdr">振動設置</string> |
| <string name="button_vibration_hdr">按鈕振動</string> |
| <string name="kb_vibration_hdr">鍵盤振動</string> |
| <string name="act_vibration_hdr">操作振動</string> |
| <string name="button_vibration">按鈕振動強度：</string> |
| <string name="kb_vibration">鍵盤振動強度：</string> |
| <string name="act_vibration">操作振動強度：</string> |
| <string name="select_language">選擇語言：</string> |
| <string name="sel_lang_btn">選擇語言</string> |
| <string name="set_language_btn">設置語言</string> |
| <string name="advanced_hdr">高級選項</string> |
| <string name="copy_log_confirm">是否導出日誌到內置存儲？</string> |
| <string name="copying_log">正在複製…</string> |
| <string name="copy_log_complete">日誌導出完成。</string> |
| <string name="fix_perm_btn">修復許可權</string> |
| <string name="fix_perm_s_btn">修復許可權</string> |
| <string name="part_sd_btn">分區SD卡</string> |
| <string name="part_sd_s_btn">SD卡</string> |
| <string name="file_manager_btn">檔案管理</string> |
| <string name="language_hdr">語言設置</string> |
| <string name="terminal_btn">終端命令</string> |
| <string name="reload_theme_btn">重載主題</string> |
| <string name="dumlock_btn">HTC Dumlock</string> |
| <string name="inject_twrp_btn">注入TWRP</string> |
| <string name="inject_twrp_confirm">是否重新注入TWRP？</string> |
| <string name="injecting_twrp">正在重新注入TWRP…</string> |
| <string name="inject_twrp_complete">TWRP注入完成。</string> |
| <string name="swipe_to_confirm">滑動按鈕確認</string> |
| <string name="part_sd_hdr">對SD卡分區</string> |
| <string name="invalid_partsd_sel">您必須選擇一個可移動設備</string> |
| <string name="part_sd_lose">您將會丟失SD卡上的所有檔案！</string> |
| <string name="part_sd_undo">此操作無法恢復！</string> |
| <string name="part_sd_ext_sz">EXT大小：</string> |
| <string name="part_sd_swap_sz">Swap大小：</string> |
| <string name="part_sd_m">-</string> |
| <string name="part_sd_p">+</string> |
| <string name="file_system">檔案系統：</string> |
| <string name="swipe_part_sd">滑動按鈕確認分區</string> |
| <string name="swipe_part_sd_s">分區</string> |
| <string name="partitioning_sd">正在對SD卡分區…</string> |
| <string name="partitioning_sd2">這將需要一段的時間。</string> |
| <string name="part_sd_complete">分區完成。</string> |
| <string name="dumlock_hdr">HTC Dumlock</string> |
| <string name="dumlock_restore_btn">恢復原版Boot鏡像</string> |
| <string name="dumlock_restore_confirm">是否恢復原版Boot鏡像？</string> |
| <string name="dumlock_restoring">正在恢復原版Boot鏡像…</string> |
| <string name="dumlock_restore_complete">恢復原版Boot鏡像完成。</string> |
| <string name="dumlock_reflash_btn">重新刷入Recovery</string> |
| <string name="dumlock_reflash_confirm">是否重新刷入Recovery至boot分區？</string> |
| <string name="dumlock_reflashing">正在刷入recovery至boot分區…</string> |
| <string name="dumlock_reflash_complete">Recovery刷入完成。</string> |
| <string name="dumlock_install_btn">安裝HTC Dumlock</string> |
| <string name="dumlock_install_confirm">是否安裝HTC dumlock檔案到系統中？</string> |
| <string name="dumlock_installing">正在安裝HTC Dumlock…</string> |
| <string name="dumlock_install_complete">HTC Dumlock安裝完成。</string> |
| <string name="swipe_to_unlock">滑動按鈕解鎖</string> |
| <string name="swipe_unlock"> 解鎖</string> |
| <string name="fm_hdr">檔案管理</string> |
| <string name="fm_sel_file">選擇檔案或檔案夾</string> |
| <string name="fm_type_folder">檔案夾</string> |
| <string name="fm_type_file">檔案</string> |
| <string name="fm_choose_act">選擇操作</string> |
| <string name="fm_selected">已選擇：%tw_fm_type%</string> |
| <string name="fm_copy_btn">複製</string> |
| <string name="fm_copy_file_btn">複製檔案</string> |
| <string name="fm_copy_folder_btn">複製檔案夾</string> |
| <string name="fm_copying">正在複製</string> |
| <string name="fm_move_btn">移動</string> |
| <string name="fm_moving">正在移動</string> |
| <string name="fm_chmod755_btn">chmod 755</string> |
| <string name="fm_chmod755ing">chmod 755</string> |
| <string name="fm_chmod_btn">chmod</string> |
| <string name="fm_delete_btn">刪除</string> |
| <string name="fm_deleting">正在刪除</string> |
| <string name="fm_rename_btn">重命名</string> |
| <string name="fm_rename_file_btn">重命名檔案</string> |
| <string name="fm_rename_folder_btn">重命名檔案夾</string> |
| <string name="fm_renaming">正在重命名</string> |
| <string name="fm_sel_dest">選擇目標目錄</string> |
| <string name="fm_sel_curr_folder">選擇當前目錄</string> |
| <string name="fm_rename_hdr">重命名</string> |
| <string name="fm_set_perms_hdr">設置許可權</string> |
| <string name="fm_perms">許可權：</string> |
| <string name="fm_complete">操作完成。</string> |
| <string name="decrypt_data_hdr">解密Data分區</string> |
| <string name="decrypt_data_enter_pass">輸入密碼.</string> |
| <string name="decrypt_data_failed">密碼錯誤，請重試！</string> |
| <string name="decrypt_data_failed_pattern">圖案錯誤，請重試！</string> |
| <string name="decrypt_data_enter_pattern">繪製解鎖圖案</string> |
| <string name="decrypt_data_trying">正在嘗試解密</string> |
| <string name="term_hdr">終端命令</string> |
| <string name="term_s_hdr">終端命令</string> |
| <string name="term_kill_btn">終止命令</string> |
| <string name="term_sel_folder_hdr">選擇運行檔案夾</string> |
| <string name="adb_sideload_hdr">ADB Sideload</string> |
| <string name="sideload_wipe_dalvik_chk">清除Dalvik Cache</string> |
| <string name="sideload_wipe_cache_chk">清除Cache</string> |
| <string name="swipe_to_sideload">滑動按鈕開始Sideload</string> |
| <string name="swipe_sideload"> 開始</string> |
| <string name="sideload_confirm">ADB Sideload</string> |
| <string name="sideload_usage">使用方式：電腦CMD輸入adb sideload xxxx(刷機包名).zip</string> |
| <string name="sideload_complete">ADB Sideload完成。</string> |
| <string name="fix_perms_hdr">修復許可權</string> |
| <string name="fix_perms_note">注意：很少情況下需要修復許可權。</string> |
| <string name="fix_perms_selinux_chk">同時修復SELinux Contexts</string> |
| <string name="fix_perms_sel_note1">修復SELinux Contexts可能會導致</string> |
| <string name="fix_perms_sel_note2">您的設備無法正常啟動。</string> |
| <string name="swipe_to_fix_perms">滑動按鈕確認修復許可權</string> |
| <string name="swipe_fix_perms"> 修復許可權</string> |
| <string name="fixing_perms">正在修復許可權…</string> |
| <string name="fix_perms_complete">修復許可權完成。</string> |
| <string name="reboot_hdr">重啟選項</string> |
| <string name="su_hdr">SuperSU檢測</string> |
| <string name="su_note1">系統目前沒有Root。</string> |
| <string name="su_note2">是否現在安裝超級授權(Root)？</string> |
| <string name="su_note3">這將會Root您的設備。</string> |
| <string name="su_cancel">不，以後再說</string> |
| <string name="swipe_su_to_install">滑動按鈕確認安裝</string> |
| <string name="swipe_su_install"> 安裝</string> |
| <string name="su_installing">正在安裝超級授權(root)</string> |
| <string name="sel_storage_list">選擇儲存位置</string> |
| <string name="ok_btn">確定</string> |
| |
| <!-- Various console messages - these consist of user displayed messages, oftentimes errors --> |
| <string name="no_kernel_selinux">內核不支持讀取SELinux contexts。</string> |
| <string name="full_selinux">完整SELinux支持。</string> |
| <string name="no_selinux">無SELinux支持(無libselinux)。</string> |
| <string name="mtp_enabled">MTP已啟用</string> |
| <string name="mtp_crash">MTP已崩潰。啟動時不再加載MTP。</string> |
| <string name="decrypt_success">已使用默認密碼解密成功。</string> |
| <string name="unable_to_decrypt">無法使用默認密碼來解密，你可能需要格式化Data分區。</string> |
| <string name="generating_md51">正在生成MD5</string> |
| <!-- Message displayed during a backup if we are generating an MD5, ideally, leave the leading " * " to help align and separate this text from other console text --> |
| <string name="generating_md52"> * 正在生成MD5…</string> |
| <string name="md5_created"> * MD5已生成。</string> |
| <string name="md5_error"> * MD5錯誤！</string> |
| <string name="md5_compute_error"> * 計算MD5錯誤。</string> |
| <string name="current_date">(Current Date)</string> |
| <string name="auto_generate">(Auto Generate)</string> |
| <string name="unable_to_locate_partition">未找到'{1}'分區。</string> |
| <string name="no_partition_selected">未選擇備份分區。</string> |
| <string name="total_partitions_backup"> * 備份分區總數：{1}</string> |
| <string name="total_backup_size"> * 備份數據總計：{1}MB</string> |
| <string name="available_space"> * 可用空間：{1}MB</string> |
| <string name="unable_locate_storage">未找到存儲設備。</string> |
| <string name="no_space">記憶體上沒有足夠的空間。</string> |
| <string name="backup_started">[已開始備份]</string> |
| <string name="backup_folder"> * 備份檔案夾：{1}</string> |
| <string name="fail_backup_folder">建立備份檔案夾失敗。</string> |
| <string name="avg_backup_fs">檔案平均備份速度：{1}MB/秒</string> |
| <string name="avg_backup_img">鏡像平均備份速度：{1}MB/秒</string> |
| <string name="total_backed_size">[總計備份 {1}MB]</string> |
| <string name="backup_completed">[備份已完成，耗時{1}秒。]</string> |
| <string name="restore_started">[已開始還原]</string> |
| <string name="restore_folder">恢復檔案夾：'{1}'</string> |
| <!-- {1} is the partition display name and {2} is the number of seconds --> |
| <string name="restort_part_done">[{1}恢復完成({2}秒)]</string> |
| <string name="verifying_md5">正在驗證MD5</string> |
| <string name="skip_md5">基於用戶設置，已跳過MD5檢查。</string> |
| <string name="calc_restore">正在計算恢復詳情…</string> |
| <string name="restore_read_only">無法恢復{1} -- 已掛載為只讀。</string> |
| <string name="restore_unable_locate">無法找到'{1}'分區。</string> |
| <string name="no_part_restore">未選擇要恢復的分區。</string> |
| <string name="restore_part_count">恢復{1}個分區…</string> |
| <string name="total_restore_size">恢復檔案總計{1}MB</string> |
| <string name="updating_system_details">更新系統詳細資訊</string> |
| <string name="restore_completed">[恢复完成，耗时{1} 秒]</string> |
| <!-- {1} is the path we could not open, {2} is strerror output --> |
| <string name="error_opening_strerr">打開出錯：'{1}' ({2})</string> |
| <string name="unable_locate_part_backup_name">無法通過備份名稱來查找分區：'{1}'</string> |
| <string name="unable_find_part_path">找不到分區路徑'{1}'</string> |
| <string name="update_part_details">正在更新分區詳情…</string> |
| <string name="update_part_details_done">…完成…</string> |
| <string name="wiping_dalvik">正在清除Dalvik Cache目錄…</string> |
| <string name="cleaned">已清除：{1}…</string> |
| <string name="dalvik_done">-- Dalvik Cache清除完成！</string> |
| <string name="no_andsec">未發現android secure分區。</string> |
| <string name="unable_to_locate">未找到{1}。</string> |
| <string name="wiping_datamedia">清除內置存儲 -- /data/media…</string> |
| <string name="unable_to_mount">無法掛載 {1}</string> |
| <string name="unable_to_mount_internal">無法掛載內置存儲</string> |
| <string name="unable_to_mount_storage">無法掛載存儲</string> |
| <string name="fail_decrypt">解密數據失敗。</string> |
| <string name="no_crypto_support">此版本不支持加密。</string> |
| <string name="decrypt_success">Data分區成功解密，新增塊設備：'{1}'</string> |
| <string name="done">完成。</string> |
| <string name="start_partition_sd">正在給SD卡分區…</string> |
| <string name="partition_sd_locate">無法找到設備進行分區。</string> |
| <string name="ext_swap_size">EXT+Swap大小超過SD卡容量。</string> |
| <string name="remove_part_table">正在刪除分區表…</string> |
| <string name="unable_rm_part">無法刪除分區表。</string> |
| <string name="create_part">正在建立{1}分區…</string> |
| <string name="unable_to_create_part">無法建立{1}分區。</string> |
| <string name="format_sdext_as">將sd-ext格式化為{1}…</string> |
| <string name="part_complete">分區完成。</string> |
| <string name="unable_to_open">無法打開'{1}'。</string> |
| <string name="mtp_already_enabled">MTP已經啟用</string> |
| <string name="mtp_fail">啟用MTP失敗</string> |
| <string name="no_mtp">不支持MTP</string> |
| <string name="image_flash_start">[開始刷入鏡像]</string> |
| <string name="img_to_flash">正在刷入鏡像：'{1}'</string> |
| <string name="flash_unable_locate">未找到'{1}'分區。</string> |
| <string name="no_part_flash">未選擇刷入分區。</string> |
| <string name="too_many_flash">選擇刷入的分區太多。</string> |
| <string name="invalid_flash">指定的刷入分區無效。</string> |
| <string name="flash_done">[鏡像刷入完成]</string> |
| <string name="wiping">正在清除{1}</string> |
| <string name="repair_not_exist">{1}不存在！無法修復！</string> |
| <string name="repairing_using">正在使用{2}修復{1}…</string> |
| <string name="unable_repair">無法修復{1}。</string> |
| <string name="mount_data_footer">無法掛載/data，未找到加密footer。</string> |
| <!-- {1} is the folder name that we could not create, {2} is strerror output --> |
| <string name="create_folder_strerr">無法創建'{1}'檔案夾({2})。</string> |
| <!-- {1} is the folder name that we could not mount, {2} is strerror output --> |
| <string name="fail_mount">掛載'{1}'失敗 ({2})</string> |
| <!-- {1} is the folder name that we could not unmount, {2} is strerror output --> |
| <string name="fail_unmount">卸載'{1}'失敗 ({2})</string> |
| <string name="cannot_resize">無法更改{1}大小。</string> |
| <string name="repair_resize">在調整大小之前修復{1}。</string> |
| <string name="unable_resize">無法調整{1}大小。</string> |
| <string name="no_md5_found">未找到'{1}'MD5校驗檔案，請取消啟用MD5驗證備份檔案選項。</string> |
| <string name="md5_fail_match">'{1}'MD5校驗失敗。</string> |
| <string name="fail_decrypt_tar">無法解密tar檔案：'{1}'</string> |
| <string name="format_data_msg">您可能需要重啟recovery才能使用/data。</string> |
| <string name="format_data_err">無法格式化並刪除加密。</string> |
| <string name="formatting_using">使用{2}格式化{1}…</string> |
| <string name="unable_to_wipe">無法清除{1}。</string> |
| <string name="cannot_wipe">無法清除{1}分區。</string> |
| <string name="remove_all">移除'{1}'下所有檔案</string> |
| <string name="wiping_data">正在清除data，跳過清除/data/media…</string> |
| <string name="backing_up">正在備份{1}…</string> |
| <string name="backing">正在備份</string> |
| <string name="backup_size">'{1}'備份檔案大小為0位元組。</string> |
| <string name="datamedia_fs_restore">警告：此/data備份檔案系統為{1}！除非把檔案系統格式設置為{1}否則可能無法啟動。</string> |
| <string name="restoring">正在恢復{1}…</string> |
| <string name="restoring_hdr">正在恢復</string> |
| <string name="recreate_folder_err">無法重新創建{1}檔案夾。</string> |
| <string name="img_size_err">鏡像大小大於目標設備</string> |
| <string name="flashing">正在刷入{1}…</string> |
| <string name="backup_folder_set">備份檔案夾設置為：'{1}'</string> |
| <string name="locate_backup_err">未找到備份檔案'{1}'</string> |
| <string name="set_restore_opt">設置恢復選項：'{1}'：</string> |
| <string name="md5_check_skip">校驗MD5已開啟</string> |
| <string name="ors_encrypt_restore_err">無法使用OpenRecoveryScript腳本恢復加密備份。</string> |
| <string name="mounting">正在掛載</string> |
| <string name="unmounting">正在卸載</string> |
| <string name="mounted">'{1}'已掛載</string> |
| <string name="unmounted">'{1}'已卸載</string> |
| <string name="setting">設置'{1}'為'{2}'</string> |
| <string name="setting_empty">設置'{1}'為空</string> |
| <string name="making_dir1">創建目錄</string> |
| <string name="making_dir2">創建目錄：'{1}'</string> |
| <string name="running_command">運行命令</string> |
| <string name="sideload">ADB Sideload</string> |
| <string name="start_sideload">正在開始ADB sideload…</string> |
| <string name="need_new_adb">您需要1.0.32或更高版本的adb才可以使用。</string> |
| <string name="no_pwd">未提供密碼。</string> |
| <string name="done_ors">腳本執行完畢</string> |
| <string name="injecttwrp">正在注入TWRP到boot鏡像…</string> |
| <string name="zip_err">安裝zip刷機包'{1}'時出錯</string> |
| <string name="installing_zip">正在安裝zip刷機包'{1}'</string> |
| <string name="select_backup_opt">設置備份選項：</string> |
| <string name="compression_on">壓縮選項已開啟</string> |
| <string name="md5_off">MD5生成已關閉</string> |
| <string name="backup_fail">備份失敗</string> |
| <string name="backup_complete">備份完成！</string> |
| <string name="running_recovery_commands">運行Recovery命令</string> |
| <string name="recovery_commands_complete">Recovery命令執行完成。</string> |
| <string name="running_ors">運行OpenRecoveryScript腳本</string> |
| <string name="ors_complete">運行OpenRecoveryScript腳本完成</string> |
| <string name="no_updater_binary">刷機包中未找到'{1}'。</string> |
| <string name="check_for_md5">正在檢測MD5…</string> |
| <string name="fail_sysmap">映射檔案'{1}'失敗</string> |
| <string name="verify_zip_sig">正在校驗Zip刷機包簽名…</string> |
| <string name="verify_zip_fail">刷機包簽名校驗失敗！</string> |
| <string name="verify_zip_done">刷機包簽名校驗成功。</string> |
| <string name="zip_corrupt">刷機包已損壞！</string> |
| <string name="no_md5">跳過MD5校驗：無法找到MD5檔案</string> |
| <string name="md5_fail">MD5不匹配</string> |
| <string name="md5_match">MD5驗證成功</string> |
| <string name="pid_signal">{1}過程結束，標誌：{2}</string> |
| <string name="pid_error">{1}過程結束，錯誤：{2}</string> |
| <string name="install_dumlock">安裝HTC Dumlock到系統…</string> |
| <string name="dumlock_restore">正在恢復原版boot…</string> |
| <string name="dumlock_reflash">正在重新刷入recovery到boot…</string> |
| <string name="run_script">正在運行{1}腳本…</string> |
| <string name="rename_stock">重命名/system下原版recovery的補丁，避免原版固件替換TWRP。</string> |
| <string name="split_backup">分解備份檔案為多個壓縮檔…</string> |
| <string name="backup_error">建立備份失敗。</string> |
| <string name="restore_error">在恢復過程中發生錯誤。</string> |
| <string name="split_thread">拆分線程ID{1}到壓縮檔{2}</string> |
| <!-- These 2 items are saved in the data manager instead of resource manager, so %llu, etc is correct instead of {1} --> |
| <string name="file_progress">已完成%llu個，共%llu個檔案，進度%i%%</string> |
| <string name="size_progress">已完成%lluMB，共%lluMB，進度%i%%</string> |
| <string name="decrypt_cmd">嘗試通過命令行解密data分區。</string> |
| <string name="base_pkg_err">無法加載基本包。</string> |
| <string name="simulating">正在模擬操作…</string> |
| <string name="backup_cancel">備份已取消。</string> |
| <string name="config_twrp">正在配置TWRP…</string> |
| <string name="config_twrp_err">此內核無法配置TWRP。</string> |
| <string name="copy_log">已經導出recovery日誌到{1}。</string> |
| <string name="max_queue">已達到最大zip刷入隊列！</string> |
| <string name="min_queue">已達到最大zip刷入隊列！</string> |
| <string name="screenshot_saved">截圖已保存到：{1}</string> |
| <string name="screenshot_err">截圖失敗！</string> |
| <string name="zip_wipe_cache">一個或多個刷機包請求清除cache -- 正在清除cache。</string> |
| <string name="and_sec_wipe_err">無法清除android secure</string> |
| <string name="dalvik_wipe_err">清除dalvik失敗</string> |
| <string name="auto_gen">(Auto Generate)</string> |
| <string name="curr_date">(Current Date)</string> |
| <string name="backup_name_len">備份名稱太長。</string> |
| <string name="backup_name_invalid">備份名稱'{1}'中包含無效字元：'{1}'</string> |
| <string name="no_real_sdcard">此設備沒有真實的SD卡！正在中止！</string> |
| <string name="cancel_sideload">取消ADB sideload…</string> |
| <string name="change_fs_err">更換檔案系統出錯。</string> |
| <string name="theme_ver_err">自定義主題和TWRP版本不匹配，正使用默認主題。</string> |
| </resources> |
| </language> |