| <?xml version="1.0"?> |
| |
| <language> |
| <display>Chinese Simplified</display> |
| |
| <resources> |
| <!-- Font overrides - only change these if your language requires special characters --> |
| <resource name="font_l" type="fontoverride" filename="DroidSansFallback.ttf" scale="100" /> |
| <resource name="font_m" type="fontoverride" filename="DroidSansFallback.ttf" scale="100" /> |
| <resource name="font_s" type="fontoverride" filename="DroidSansFallback.ttf" scale="100" /> |
| <resource name="fixed" type="fontoverride" filename="DroidSansFallback.ttf" scale="100" /> |
| |
| <!-- Partition display names --> |
| <string name="system">System</string> |
| <string name="system_image">System 镜像</string> |
| <string name="vendor">Vendor</string> |
| <string name="vendor_image">Vendor 镜像</string> |
| <string name="boot">Boot</string> |
| <string name="recovery">Recovery</string> |
| <string name="cache">Cache</string> |
| <string name="data">Data</string> |
| <string name="sdcard">SDCard</string> |
| <string name="internal">内置存储</string> |
| <string name="microsd">SD 卡</string> |
| <string name="usbotg">外置 U盘</string> |
| <string name="android_secure">Android Secure</string> |
| <string name="dalvik">Dalvik / ART Cache</string> |
| <!-- This is a rarely used partition on a Micro SD card for a very old app2sd system --> |
| <string name="sdext">SD-EXT</string> |
| <string name="adopted_data">使用DATA</string> |
| <string name="adopted_storage">使用存储</string> |
| |
| <!-- GUI XML strings --> |
| <string name="twrp_header">Team Win Recovery Project</string> |
| <string name="twrp_watch_header">TWRP %tw_version%</string> |
| <string name="cpu_temp">温度: %tw_cpu_temp% °C</string> |
| <string name="battery_pct">电量: %tw_battery%</string> |
| <string name="sort_by_name">按名称排序</string> |
| <string name="sort_by_date">按日期排序</string> |
| <string name="sort_by_size">按大小排序</string> |
| <string name="sort_by_name_only">名称</string> |
| <string name="sort_by_date_only">日期</string> |
| <string name="sort_by_size_only">大小</string> |
| <string name="tab_general">常规</string> |
| <string name="tab_options">选项</string> |
| <string name="tab_backup">备份</string> |
| <string name="tab_time_zone">时区</string> |
| <string name="tab_screen">屏幕</string> |
| <string name="tab_vibration">振动</string> |
| <string name="tab_language">语言</string> |
| |
| <string name="install_btn">安装</string> |
| <string name="wipe_btn">清除</string> |
| <string name="backup_btn">备份</string> |
| <string name="restore_btn">恢复</string> |
| <string name="mount_btn">挂载</string> |
| <string name="settings_btn">设置</string> |
| <string name="advanced_btn">高级</string> |
| <string name="reboot_btn">重启</string> |
| <string name="files_btn">文件</string> |
| <string name="copy_log_btn">导出日志</string> |
| <string name="select_type_hdr">选择类型</string> |
| <string name="install_zip_hdr">安装ZIP包</string> |
| <string name="install_zip_btn">安装ZIP包</string> |
| <string name="install_image_hdr">刷入Image</string> |
| <string name="install_image_btn">刷入Image</string> |
| <string name="install_select_file_hdr">选择文件</string> |
| <string name="file_selector_folders_hdr">目录</string> |
| <string name="select_file_from_storage">从 %tw_storage_display_name% (%tw_storage_free_size% MB) 里选择文件</string> |
| <string name="adb_sideload_btn">ADB 线刷</string> |
| <string name="install_hdr">安装</string> |
| <string name="select_storage_hdr">选择存储器</string> |
| <string name="select_storage_btn">选择存储器</string> |
| <string name="queue_hdr">列表</string> |
| <string name="zip_queue_count">最多 10 个文件，第 %tw_zip_queue_count% 个</string> |
| <string name="zip_queue_count_s">最多 10 个文件，第 %tw_zip_queue_count% 个:</string> |
| <string name="zip_warn1">此操作可能会刷入不兼容的 ROM</string> |
| <string name="zip_warn2">导致您的设备无法使用。</string> |
| <string name="zip_back_cancel">按返回键取消添加这个卡刷包.</string> |
| <string name="zip_back_clear">按返回键清除Zip列表.</string> |
| <string name="folder">目录:</string> |
| <string name="file">文件:</string> |
| <string name="zip_sig_chk">Zip文件签名校验</string> |
| <string name="inject_twrp_chk">安装完成后注入 TWRP</string> |
| <string name="options_hdr">选项</string> |
| <string name="confirm_flash_hdr">确认刷入</string> |
| <string name="zip_queue">列表:</string> |
| <string name="options">选项:</string> |
| <string name="swipe_confirm"> 确认</string> |
| <string name="zip_add_btn">添加更多卡刷包</string> |
| <string name="zip_clear_btn">清除卡刷包队列</string> |
| <string name="install_zip_count_hdr">刷入文件%tw_zip_index%，共%tw_zip_queue_count%个</string> |
| <string name="installing_zip">正在安装刷机包: %tw_file%</string> |
| <string name="failed">失败</string> |
| <string name="successful">成功</string> |
| <string name="install_failed">安装失败</string> |
| <string name="install_successful">安装完成</string> |
| <string name="wipe_cache_dalvik_btn">清除 cache/dalvik (缓存)</string> |
| <string name="reboot_system_btn">重启系统</string> |
| <string name="install_sel_target">选择目标分区</string> |
| <string name="flash_image_select">选择要刷入镜像的分区:</string> |
| <string name="target_partition">目标分区:</string> |
| <string name="flashing_image">正在刷入镜像文件...</string> |
| <string name="image_flashed">镜像文件已刷入</string> |
| <string name="wipe_cache_dalvik_confirm">清除 Cache 和 Dalvik?</string> |
| <string name="wiping_cache_dalvik">清除 Cache 和 Dalvik 中...</string> |
| <string name="wipe_cache_dalvik_complete">Cache 和 Dalvik 清除完成</string> |
| <string name="swipe_wipe">滑动确认清除</string> |
| <string name="swipe_wipe_s"> 清除</string> |
| <string name="no_os1">未安装系统!</string> |
| <string name="no_osrb">你确定想要重启么?</string> |
| <string name="no_ospo">你确定想要关机么?</string> |
| <string name="rebooting">重启中...</string> |
| <string name="swipe_reboot">滑动确认重启</string> |
| <string name="swipe_reboot_s"> 重启</string> |
| <string name="swipe_flash">滑动确认刷入</string> |
| <string name="confirm_action">确认操作</string> |
| <string name="back_cancel">按返回按钮取消。</string> |
| <string name="cancel_btn">取消</string> |
| <string name="wipe_hdr">清除</string> |
| <string name="factory_reset_hdr">恢复出厂设置</string> |
| <string name="factory_reset_btn">恢复出厂设置</string> |
| <string name="factory_reset1">清除 Data 分区, Cache 分区和 Dalvik 缓存</string> |
| <string name="factory_reset2">(不会包含内置存储卡)</string> |
| <string name="factory_reset3">大多数时候你只需要</string> |
| <string name="factory_reset4">进行此清除操作即可。</string> |
| <string name="factory_resetting">正在恢复出厂设置...</string> |
| <string name="advanced_wipe_hdr">高级清除菜单</string> |
| <string name="advanced_wipe_btn">高级清除菜单</string> |
| <string name="wipe_enc_confirm">从 Data 分区清除加密设置吗?</string> |
| <string name="formatting_data">正在格式化 Data 分区...</string> |
| <string name="swipe_format_data">滑动确认擦除 Data 分区</string> |
| <string name="swipe_format_data_s"> 擦除 Data 分区</string> |
| <string name="factory_reset_complete">恢复出厂设置完成</string> |
| <string name="sel_part_hdr">选择分区</string> |
| <string name="wipe_sel_confirm">确认清除已选分区?</string> |
| <string name="wiping_part">正在清除分区...</string> |
| <string name="wipe_complete">清除完成</string> |
| <string name="sel_part_wipe">选择要清除的分区:</string> |
| <string name="invalid_part_sel">分区选择无效</string> |
| <string name="format_data_hdr">格式化 Data 分区</string> |
| <string name="format_data_btn">格式化 Data 分区</string> |
| <string name="format_data_ptr1">格式化 Data 分区将擦除您安装的所有软件,</string> |
| <string name="format_data_ptr2">备份，图片，视频，媒体文件，以及</string> |
| <string name="format_data_ptr3">以及内置存储上的加密设置等。</string> |
| <string name="format_data_lcp1">格式化 Data 分区将擦除您安装的所有软件备份，图片，</string> |
| <string name="format_data_lcp2">视频，媒体文件，以及以及内置存储上的加密设置等。</string> |
| <string name="format_data_wtc1">格式化 Data 将擦除所有软件备份，</string> |
| <string name="format_data_wtc2">图片等，不能撤销.</string> |
| <string name="format_data_undo">此操作无法恢复. 点返回按钮可取消操作。</string> |
| <string name="format_data_complete">Data 分区格式化完成</string> |
| <!-- Translator note: the word "yes" must remain English! --> |
| <string name="yes_continue">输入 yes 继续。</string> |
| <string name="part_opt_hdr">目标分区: %tw_partition_name%</string> |
| <string name="sel_act_hdr">选择操作</string> |
| <string name="file_sys_opt">文件系统选项</string> |
| <string name="partition">分区: %tw_partition_name%</string> |
| <string name="part_mount_point">挂载点: %tw_partition_mount_point%</string> |
| <string name="part_curr_fs">文件系统: %tw_partition_file_system%</string> |
| <string name="part_present_yes">当前: 是</string> |
| <string name="part_present_no">当前: 否</string> |
| <string name="part_removable_yes">可移动: 是</string> |
| <string name="part_removable_no">可移动: 否</string> |
| <string name="part_size">大小: %tw_partition_size%MB</string> |
| <string name="part_used">已用: %tw_partition_used%MB</string> |
| <string name="part_free">可用: %tw_partition_free%MB</string> |
| <string name="part_backup_size">备份大小: %tw_partition_backup_size%MB</string> |
| <string name="resize_btn">调整文件系统大小</string> |
| <string name="resize_btn_s">调整大小</string> |
| <string name="resize_confirm">调整 %tw_partition_name% 分区的大小?</string> |
| <string name="resizing">调整大小中...</string> |
| <string name="resize_complete">调整完毕</string> |
| <string name="swipe_resize">滑动确认调整</string> |
| <string name="swipe_resize_s"> 调整</string> |
| <string name="repair_btn">修复文件系统</string> |
| <string name="repair_btn_s">修复</string> |
| <string name="repair_confirm">修复 %tw_partition_name%?</string> |
| <string name="repairing">修复中...</string> |
| <string name="repair_complete">修复完成</string> |
| <string name="swipe_repair">滑动确认修复</string> |
| <string name="swipe_repair_s"> 修复</string> |
| <string name="change_fs_btn">转换文件系统</string> |
| <string name="change_fs_btn_s">文件系统</string> |
| <string name="change_fs_for_hdr">转换 %tw_partition_name% 的文件系统</string> |
| <string name="change_fs_for_hdr_s">分区: %tw_partition_name% > 选择文件系统</string> |
| <string name="change_fs_warn1">一些 ROM 或者内核可能某些</string> |
| <string name="change_fs_warn2">文件系统。请谨慎操作!</string> |
| <string name="change_fs_confirm">确认转换 %tw_partition_name%?</string> |
| <string name="formatting">格式化中...</string> |
| <string name="format_complete">格式化完成</string> |
| <string name="swipe_change_fs">滑动确认转换</string> |
| <string name="swipe_change_s"> 转换</string> |
| <string name="back_btn">返回</string> |
| <string name="wipe_enc_btn">擦除加密设置</string> |
| <string name="swipe_factory_reset">滑动确认恢复出厂设置</string> |
| <string name="repair_change_btn">修复或转换文件系统</string> |
| <string name="storage_hdr">存储器: %tw_storage_display_name% (%tw_storage_free_size% MB)</string> |
| <string name="backup_hdr">备份分区</string> |
| <string name="backup_confirm_hdr">确认备份</string> |
| <string name="encryption_tab">加密</string> |
| <string name="encryption">加密:</string> |
| <string name="name">备份名称:</string> |
| <string name="sel_part_backup">选择要备份的分区:</string> |
| <string name="storage">存储器:</string> |
| <string name="enc_disabled">禁用的 - 设置密码以启用</string> |
| <string name="enc_enabled">启用</string> |
| <string name="enable_backup_comp_chk">启用压缩</string> |
| <string name="skip_md5_backup_chk">备份时跳过生成MD5校验</string> |
| <string name="disable_backup_space_chk">禁用剩余空间检测</string> |
| <string name="refresh_sizes_btn">刷新分区大小</string> |
| <string name="swipe_backup">滑动确认备份</string> |
| <string name="append_date_btn">文件名附加当前日期</string> |
| <string name="backup_name_exists">使用该名称的备份已经存在！</string> |
| <string name="encrypt_backup">是否加密备份文件?</string> |
| <string name="enter_pass">输入密码:</string> |
| <string name="enter_pass2">再次输入密码:</string> |
| <string name="pass_not_match">密码不匹配!</string> |
| <string name="partitions">分区:</string> |
| <string name="disabled">禁用</string> |
| <string name="enabled">启用</string> |
| <string name="backup_name_hdr">设置备份名称</string> |
| <string name="progress">进度:</string> |
| <string name="backup_complete">备份完成</string> |
| <string name="restore_hdr">还原分区</string> |
| <string name="sel_backup_hdr">选择备份</string> |
| <string name="restore_sel_store_hdr">选择备份存储器:%tw_storage_display_name% (%tw_storage_free_size% MB)</string> |
| <string name="restore_sel_pack_fs">选择要还原的备份包:</string> |
| <string name="restore_enc_backup_hdr">加密备份</string> |
| <string name="restore_dec_fail">密码错误, 请重试!</string> |
| <string name="del_backup_btn">删除备份文件</string> |
| <string name="del_backup_confirm">确定删除备份?</string> |
| <string name="del_backup_confirm2">注意此操作无法恢复!</string> |
| <string name="deleting_backup">删除备份中...</string> |
| <string name="backup_deleted">备份删除完成</string> |
| <string name="swipe_delete">滑动确认删除</string> |
| <string name="swipe_delete_s"> 删除</string> |
| <string name="restore_try_decrypt">加密备份 - 尝试解密</string> |
| <string name="restore_try_decrypt_s">尝试解密</string> |
| <string name="restore_backup_date">备份包日期: %tw_restore_file_date%</string> |
| <string name="restore_sel_part">选择还原分区:</string> |
| <string name="restore_enable_md5_chk">打开备份文件的MD5验证</string> |
| <string name="restore_completed">[耗时 {1} 秒还原完成]</string> |
| <string name="swipe_restore">滑动确认还原</string> |
| <string name="swipe_restore_s"> 还原</string> |
| <string name="rename_backup_hdr">重命名备份</string> |
| <string name="rename_backup_confirm">确定重命名备份?</string> |
| <string name="rename_backup_confirm2">此操作将无法恢复!</string> |
| <string name="renaming_backup">重命名备份中...</string> |
| <string name="rename_backup_complete">重命名备份完成</string> |
| <string name="swipe_to_rename">滑动确认重命名</string> |
| <string name="swipe_rename"> 重命名</string> |
| <string name="confirm_hdr">确认</string> |
| <string name="mount_hdr">挂载分区</string> |
| <string name="mount_sel_part">选择要挂载的分区:</string> |
| <string name="mount_sys_ro_chk">挂载 system 分区只读模式</string> |
| <string name="mount_sys_ro_s_chk">挂载 system 分区只读</string> |
| <string name="decrypt_data_btn">解密数据</string> |
| <string name="disable_mtp_btn">关闭 MTP 模式</string> |
| <string name="enable_mtp_btn">打开 MTP 模式</string> |
| <string name="mount_usb_storage_btn">挂载 USB 大容量存储器</string> |
| <string name="usb_storage_hdr">USB 大容量存储器</string> |
| <string name="usb_stor_mnt1">USB 大容量存储已挂载</string> |
| <string name="usb_stor_mnt2">确保卸载前从您的电脑</string> |
| <string name="usb_stor_mnt3">上安全移除设备!</string> |
| <string name="unmount_btn">卸载</string> |
| <string name="rb_system_btn">系统</string> |
| <string name="rb_poweroff_btn">关机</string> |
| <string name="rb_recovery_btn">Recovery</string> |
| <string name="rb_bootloader_btn">Bootloader</string> |
| <string name="rb_download_btn">下载模式</string> |
| <string name="turning_off">关机中...</string> |
| <string name="swipe_power_off">滑动确认关机</string> |
| <string name="swipe_power_off_s">关机</string> |
| <string name="sys_ro_hdr">未修改系统分区</string> |
| <string name="sys_ro_keep">保持 System 分区只读模式?</string> |
| <string name="sys_rop1">TWRP 可以不改变你的 system 分区</string> |
| <string name="sys_rop2">以此来让你使用官方升级时更简单.</string> |
| <string name="sys_rop3">保持只读模式会让 TWRP 无法阻止原厂 ROM 覆写 TWRP</string> |
| <string name="sys_rop4">并且无法提供 root 功能.</string> |
| <string name="sys_rop5">安装 Zip 卡刷包或执行 adb 操作依然</string> |
| <string name="sys_rop6">依然会修改系统分区.</string> |
| <string name="sys_rol1">TWRP 可以不改变你的 system 分区来让你使用官方升级时更简单</string> |
| <string name="sys_rol2">保持只读模式会让 TWRP 无法阻止原厂 ROM 覆写 TWRP 并且无法</string> |
| <string name="sys_rol3">提供 root 功能. 安装 Zip 卡刷包或执行 adb 操作依然会修改系统分区.</string> |
| <string name="sys_ro_never_show_chk">下次启动将不再显示此屏幕</string> |
| <string name="sys_ro_keep_ro_btn">保持只读</string> |
| <string name="swipe_allow_mod">滑动确认允许修改</string> |
| <string name="swipe_allow_mod_s">允许修改</string> |
| <string name="settings_hdr">设置</string> |
| <string name="settings_gen_hdr">常规设置</string> |
| <string name="settings_gen_s_hdr">常规</string> |
| <string name="settings_gen_btn">常规</string> |
| <string name="use_rmrf_chk">使用 rm -rf 格式化</string> |
| <string name="use24clock_chk">使用 24 小时制</string> |
| <string name="rev_navbar_chk">反转底部按钮布局</string> |
| <string name="simact_chk">主题测试模拟操作</string> |
| <string name="simfail_chk">模拟失败的操作</string> |
| <string name="ctr_navbar_rdo">导航栏按钮居中</string> |
| <string name="lft_navbar_rdo">导航栏按钮左对齐</string> |
| <string name="rht_navbar_rdo">导航栏按钮右对齐</string> |
| <string name="restore_defaults_btn">恢复默认设置</string> |
| <string name="settings_tz_btn">时区</string> |
| <string name="settings_screen_btn">屏幕</string> |
| <string name="settings_screen_bright_btn">屏幕亮度</string> |
| <string name="settings_vibration_btn">振动</string> |
| <string name="settings_language_btn">语言</string> |
| <string name="time_zone_hdr">时区</string> |
| <string name="sel_tz_list">选择时区:</string> |
| <!-- Translator note: if it does not make sense to translate the locations or if it makes more sense, |
| feel free to change the location listed or drop the location entirely and just call it UTC -6 --> |
| <string name="utcm11">(UTC -11) 美属萨摩亚, 中途岛</string> |
| <string name="utcm10">(UTC -10) 夏威夷</string> |
| <string name="utcm9">(UTC -9) 阿拉斯加</string> |
| <string name="utcm8">(UTC -8) 太平洋标准时间</string> |
| <string name="utcm7">(UTC -7) 北美山区标准时间</string> |
| <string name="utcm6">(UTC -6) 北美中部标准时间</string> |
| <string name="utcm5">(UTC -5) 北美东部标准时间</string> |
| <string name="utcm4">(UTC -4) 大西洋标准时间</string> |
| <string name="utcm3">(UTC -3) 巴西, 阿根廷(布宜诺斯)</string> |
| <string name="utcm2">(UTC -2) 中大西洋</string> |
| <string name="utcm1">(UTC -1) 葡萄牙(亚速尔群岛), 佛得角</string> |
| <string name="utc0">(UTC 0) 伦敦, 都柏林, 里斯本</string> |
| <string name="utcp1">(UTC +1) 柏林, 布鲁塞尔, 巴黎</string> |
| <string name="utcp2">(UTC +2) 雅典, 伊斯坦布尔, 南非</string> |
| <string name="utcp3">(UTC +3) 莫斯科, 巴格达</string> |
| <string name="utcp4">(UTC +4) 阿布扎比, 第比利斯, 马斯喀特</string> |
| <string name="utcp5">(UTC +5) 叶卡捷琳堡, 伊斯兰堡</string> |
| <string name="utcp6">(UTC +6) 阿拉木图, 达卡, 科伦坡</string> |
| <string name="utcp7">(UTC +7) 曼谷, 河内, 雅加达</string> |
| <string name="utcp8">(UTC +8) 北京, 新加坡, 香港</string> |
| <string name="utcp9">(UTC +9) 东京, 首尔, 雅库茨克</string> |
| <string name="utcp10">(UTC +10) 澳大利亚东部, 关岛</string> |
| <string name="utcp11">(UTC +11) 符拉迪沃斯托克, 索罗门群岛</string> |
| <string name="utcp12">(UTC +12) 奥克兰, 惠灵顿, 斐济</string> |
| <string name="sel_tz_offset">时间偏差(常用0): %tw_time_zone_guioffset%</string> |
| <string name="tz_offset_none">无</string> |
| <string name="tz_offset_0">0</string> |
| <string name="tz_offset_15">15分</string> |
| <string name="tz_offset_30">30分</string> |
| <string name="tz_offset_45">45分</string> |
| <string name="use_dst_chk">使用夏令时 (DST)</string> |
| <string name="curr_tz">当前时区: %tw_time_zone%</string> |
| <string name="curr_tz_s">当前时区:</string> |
| <string name="set_tz_btn">设置时区</string> |
| <string name="settings_screen_hdr">屏幕设置</string> |
| <string name="settings_screen_timeout_hdr">屏幕超时</string> |
| <string name="enable_timeout_chk">启用屏幕超时</string> |
| <string name="screen_to_slider">屏幕超时时间(秒):</string> |
| <string name="screen_to_slider_s">屏幕超时时间(0=禁用): %tw_screen_timeout_secs%</string> |
| <string name="screen_to_na">屏幕超时设置不可用</string> |
| <string name="screen_bright_slider">亮度: %tw_brightness_pct%%</string> |
| <string name="screen_bright_na">亮度设置不可用</string> |
| <string name="vibration_hdr">振动设置</string> |
| <string name="button_vibration_hdr">按钮振动强度</string> |
| <string name="kb_vibration_hdr">键盘振动强度</string> |
| <string name="act_vibration_hdr">操作振动强度</string> |
| <string name="button_vibration">按钮振动强度:</string> |
| <string name="kb_vibration">键盘振动强度:</string> |
| <string name="act_vibration">操作振动强度:</string> |
| <string name="select_language">设置语言:</string> |
| <string name="sel_lang_btn">选择语言</string> |
| <string name="set_language_btn">设置语言</string> |
| <string name="advanced_hdr">高级选项</string> |
| <string name="copy_log_confirm">确定复制日志到 SD 卡?</string> |
| <string name="copying_log">复制日志到 SD 卡中...</string> |
| <string name="copy_log_complete">日志复制完成</string> |
| <string name="fix_perm_btn">修复权限</string> |
| <string name="fix_perm_s_btn">修复权限</string> |
| <string name="part_sd_btn">SD 卡分区</string> |
| <string name="part_sd_s_btn">SD Card</string> |
| <string name="file_manager_btn">文件管理器</string> |
| <string name="language_hdr">语言</string> |
| <string name="terminal_btn">终端命令行</string> |
| <string name="reload_theme_btn">重新载入主题</string> |
| <string name="dumlock_btn">HTC Dumlock</string> |
| <string name="inject_twrp_btn">重新注入 TWRP</string> |
| <string name="inject_twrp_confirm">重新注入 TWRP?</string> |
| <string name="injecting_twrp">重新注入 TWRP 中...</string> |
| <string name="inject_twrp_complete">TWRP 注入完成</string> |
| <string name="swipe_to_confirm">滑动确认操作</string> |
| <string name="part_sd_hdr">SD 卡分区</string> |
| <string name="invalid_partsd_sel">你必须选择一个可移动设备</string> |
| <string name="part_sd_lose">您将丢失 SD 卡上的所有文件!</string> |
| <string name="part_sd_undo">此操作将无法恢复!</string> |
| <string name="part_sd_ext_sz">EXT 大小:</string> |
| <string name="part_sd_swap_sz">Swap 大小:</string> |
| <string name="part_sd_m">-</string> |
| <string name="part_sd_p">+</string> |
| <string name="file_system">文件系统:</string> |
| <string name="swipe_part_sd">滑动确认分区</string> |
| <string name="swipe_part_sd_s">分区</string> |
| <string name="partitioning_sd">分区SD卡...</string> |
| <string name="partitioning_sd2">这个过程需要几分钟。</string> |
| <string name="part_sd_complete">分区完成</string> |
| <string name="dumlock_hdr">HTC Dumlock</string> |
| <string name="dumlock_restore_btn">恢复初始内核分区</string> |
| <string name="dumlock_restore_confirm">恢复初始内核 boot 镜像?</string> |
| <string name="dumlock_restoring">恢复初始 Boot 中...</string> |
| <string name="dumlock_restore_complete">恢复初始 Boot 完成</string> |
| <string name="dumlock_reflash_btn">重刷 Recovery</string> |
| <string name="dumlock_reflash_confirm">重刷 recovery 到boot?</string> |
| <string name="dumlock_reflashing">重刷 recovery 到 boot 中...</string> |
| <string name="dumlock_reflash_complete">重刷 recovery 到 boot 完成</string> |
| <string name="dumlock_install_btn">安装 HTC Dumlock</string> |
| <string name="dumlock_install_confirm">安装 HTC dumlock 文件到 ROM?</string> |
| <string name="dumlock_installing">安装 HTC Dumlock 中...</string> |
| <string name="dumlock_install_complete">HTC Dumlock 安装完成</string> |
| <string name="swipe_to_unlock">滑动确认解锁</string> |
| <string name="swipe_unlock"> 解锁</string> |
| <string name="fm_hdr">文件管理器</string> |
| <string name="fm_sel_file">选择文件或者文件夹</string> |
| <string name="fm_type_folder">目录</string> |
| <string name="fm_type_file">文件</string> |
| <string name="fm_choose_act">选择操作</string> |
| <string name="fm_selected">已选择 %tw_fm_type%:</string> |
| <string name="fm_copy_btn">复制</string> |
| <string name="fm_copy_file_btn">复制文件</string> |
| <string name="fm_copy_folder_btn">复制文件夹</string> |
| <string name="fm_copying">复制中</string> |
| <string name="fm_move_btn">移动</string> |
| <string name="fm_moving">移动中</string> |
| <string name="fm_chmod755_btn">设置权限 755</string> |
| <string name="fm_chmod755ing">设置权限 755</string> |
| <string name="fm_chmod_btn">设置权限</string> |
| <string name="fm_delete_btn">删除</string> |
| <string name="fm_deleting">删除中</string> |
| <string name="fm_rename_btn">重命名</string> |
| <string name="fm_rename_file_btn">重命名文件</string> |
| <string name="fm_rename_folder_btn">重命名文件夹</string> |
| <string name="fm_renaming">重命名中</string> |
| <string name="fm_sel_dest">选择目标文件夹</string> |
| <string name="fm_sel_curr_folder">选择当前文件夹</string> |
| <string name="fm_rename_hdr">重命名</string> |
| <string name="fm_set_perms_hdr">设置权限</string> |
| <string name="fm_perms">权限:</string> |
| <string name="fm_complete">文件操作完成</string> |
| <string name="decrypt_data_hdr">加密 Data</string> |
| <string name="decrypt_data_enter_pass"></string> |
| <string name="decrypt_data_failed">密码错误，请重试!</string> |
| <string name="decrypt_data_failed_pattern">密码错误，请重试!</string> |
| <string name="decrypt_data_enter_pattern">输入模式.</string> |
| <string name="decrypt_data_trying">尝试解密</string> |
| <string name="term_hdr">终端命令行</string> |
| <string name="term_s_hdr">终端</string> |
| <string name="term_kill_btn">结束命令</string> |
| <string name="term_sel_folder_hdr">浏览目录选择起始目录</string> |
| <string name="adb_sideload_hdr">ADB Sideload 线刷模式</string> |
| <string name="sideload_wipe_dalvik_chk">清除 Dalvik Cache</string> |
| <string name="sideload_wipe_cache_chk">清除 Cache</string> |
| <string name="swipe_to_sideload">滑动按钮开始 Sideload 线刷</string> |
| <string name="swipe_sideload"> 开始</string> |
| <string name="sideload_confirm">ADB Sideload 线刷模式</string> |
| <string name="sideload_usage">使用方法: adb sideload 卡刷包文件名.zip</string> |
| <string name="sideload_complete">ADB Sideload 线刷完成</string> |
| <string name="fix_perms_hdr">修复权限</string> |
| <string name="fix_perms_note">注：固定的权限很少需要。</string> |
| <string name="fix_perms_selinux_chk">同时修复 SELinux</string> |
| <string name="fix_perms_sel_note1">修复 SELinux 可能导致</string> |
| <string name="fix_perms_sel_note2">您的设备无法正常启动</string> |
| <string name="swipe_to_fix_perms">滑动确认修复权限</string> |
| <string name="swipe_fix_perms"> 修复权限</string> |
| <string name="fixing_perms">修复权限中...</string> |
| <string name="fix_perms_complete">修复权限完毕</string> |
| <string name="reboot_hdr">重启菜单</string> |
| <string name="su_hdr">SuperSU 检测</string> |
| <string name="su_note1">系统看起来尚未 root。</string> |
| <string name="su_note2">是否安装 SuperSU?</string> |
| <string name="su_note3">将对你的手机进行 root 操作。</string> |
| <string name="su_cancel">不安装</string> |
| <string name="swipe_su_to_install">滑动确认安装</string> |
| <string name="swipe_su_install"> 安装</string> |
| <string name="su_installing">安装 SuperSU 中</string> |
| <string name="sel_storage_list">选择存储器</string> |
| <string name="ok_btn">确定</string> |
| |
| <!-- Various console messages - these consist of user displayed messages, oftentimes errors --> |
| <string name="no_kernel_selinux">内核不支持读取 SELinux contexts.</string> |
| <string name="full_selinux">完整 SELinux 支持.</string> |
| <string name="no_selinux">没有 SELinux 支持 (无 libselinux).</string> |
| <string name="mtp_enabled">打开 MTP 模式</string> |
| <string name="mtp_crash">MTP崩溃, 启动的时候不启动 MTP.</string> |
| <string name="decrypt_success">使用默认密码成功解密.</string> |
| <string name="unable_to_decrypt">无法使用默认密码来解密. 你可能需要执行格式化Data分区.</string> |
| <string name="generating_md51">正在生成 MD5</string> |
| <!-- Message displayed during a backup if we are generating an MD5, ideally, leave the leading " * " to help align and separate this text from other console text --> |
| <string name="generating_md52"> * 正在生成 MD5 ...</string> |
| <string name="md5_created"> * MD5 已生成.</string> |
| <string name="md5_error"> * MD5 错误!</string> |
| <string name="md5_compute_error"> * 计算 MD5 错误.</string> |
| <string name="current_date">(当前日期)</string> |
| <string name="auto_generate">(自动生成)</string> |
| <string name="unable_to_locate_partition">无法找到 '{1}' 分区.</string> |
| <string name="no_partition_selected">未选择要备份的分区.</string> |
| <string name="total_partitions_backup"> * 备份分区的总数: {1}</string> |
| <string name="total_backup_size"> * 所有数据的总大小: {1}MB</string> |
| <string name="available_space"> * 可用空间: {1}MB</string> |
| <string name="unable_locate_storage">无法找到存储设备.</string> |
| <string name="no_space">存储器上没有足够的空间.</string> |
| <string name="backup_started">[备份已开启]</string> |
| <string name="backup_folder"> * 备份目录: {1}</string> |
| <string name="fail_backup_folder">创建备份目录失败.</string> |
| <string name="avg_backup_fs">文件平均备份速率: {1}MB/秒</string> |
| <string name="avg_backup_img">镜像平均备份速率: {1}MB/秒</string> |
| <string name="total_backed_size">[总共备份 {1}MB]</string> |
| <string name="backup_completed">[耗时 {1} 秒备份完成]</string> |
| <string name="restore_started">[还原已经开始]</string> |
| <string name="restore_folder">还原目录: '{1}'</string> |
| <!-- {1} is the partition display name and {2} is the number of seconds --> |
| <string name="restort_part_done">[{1} 完成 ({2} 秒)]</string> |
| <string name="verifying_md5">正在校验 MD5</string> |
| <string name="skip_md5">正在跳过MD5检测基于用户设置.</string> |
| <string name="calc_restore">正在计算还原详情...</string> |
| <string name="restore_read_only">不能还原{1} -- 只读挂载.</string> |
| <string name="restore_unable_locate">无法找到 '{1}' 分区.</string> |
| <string name="no_part_restore">没有选择要还原的分区.</string> |
| <string name="restore_part_count">还原{1}个分区...</string> |
| <string name="total_restore_size">总还原大小 {1}MB</string> |
| <string name="updating_system_details">更新系统详细信息</string> |
| <string name="restore_completed">还原完毕</string> |
| <!-- {1} is the path we could not open, {2} is strerror output --> |
| <string name="error_opening_strerr">打开出错: '{1}' ({2})</string> |
| <string name="unable_locate_part_backup_name">无法通过备份名称来查找分区: '{1}'</string> |
| <string name="unable_find_part_path">找不到分区路径 '{1}'</string> |
| <string name="update_part_details">正在更新分区详情...</string> |
| <string name="update_part_details_done">...完成</string> |
| <string name="wiping_dalvik">清除 Dalvik Cache 目录中...</string> |
| <string name="cleaned">已清除: {1}...</string> |
| <string name="dalvik_done">-- Dalvik Cache 目录清除完毕!</string> |
| <string name="no_andsec">没有发现 android secure 分区.</string> |
| <string name="unable_to_locate">无法找到 {1}.</string> |
| <string name="wiping_datamedia">清除内置储存 -- /data/media...</string> |
| <string name="unable_to_mount">无法挂载 {1}</string> |
| <string name="unable_to_mount_internal">无法挂载内置储存</string> |
| <string name="unable_to_mount_storage">无法挂载存储</string> |
| <string name="fail_decrypt">解密数据失败.</string> |
| <string name="no_crypto_support">此版本不支持加密.</string> |
| <string name="decrypt_success">Data 成功解密，新增块设备: '{1}'</string> |
| <string name="done">完成.</string> |
| <string name="start_partition_sd">分区 SD 卡中...</string> |
| <string name="partition_sd_locate">无法找到设备进行分区.</string> |
| <string name="ext_swap_size">EXT + Swap 大小超过 SD 卡大小.</string> |
| <string name="remove_part_table">删除分区表...</string> |
| <string name="unable_rm_part">无法删除分区表.</string> |
| <string name="create_part">正在创建 {1} 分区...</string> |
| <string name="unable_to_create_part">无法创建 {1} 分区.</string> |
| <string name="format_sdext_as">把 sd-ext 格式化为{1}...</string> |
| <string name="part_complete">分区完毕.</string> |
| <string name="unable_to_open">无法打开 '{1}'.</string> |
| <string name="mtp_already_enabled">MTP 已经启用</string> |
| <string name="mtp_fail">启用 MTP 失败</string> |
| <string name="no_mtp">没有编译 MTP 支持</string> |
| <string name="image_flash_start">[镜像刷入开始]</string> |
| <string name="img_to_flash">待刷入镜像: '{1}'</string> |
| <string name="flash_unable_locate">无法找到 '{1}' 分区刷入.</string> |
| <string name="no_part_flash">没有选择刷入分区.</string> |
| <string name="too_many_flash">选择刷入太多的分区.</string> |
| <string name="invalid_flash">刷入分区指定无效.</string> |
| <string name="flash_done">[镜像刷入完毕]</string> |
| <string name="wiping">正在清除 {1}</string> |
| <string name="repair_not_exist">{1} 不存在! 无法修复!</string> |
| <string name="repairing_using">正在使用{2}修复{1}...</string> |
| <string name="unable_repair">无法修复 {1}.</string> |
| <string name="mount_data_footer">无法挂载 /data, 无法找到加密 footer.</string> |
| <!-- {1} is the folder name that we could not create, {2} is strerror output --> |
| <string name="create_folder_strerr">无法创建 '{1}' 目录({2}).</string> |
| <!-- {1} is the folder name that we could not mount, {2} is strerror output --> |
| <string name="fail_mount">卸载 '{1}' 失败 ({2})</string> |
| <!-- {1} is the folder name that we could not unmount, {2} is strerror output --> |
| <string name="fail_unmount">卸载 '{1}' 失败 ({2})</string> |
| <string name="cannot_resize">无法更改{1}大小.</string> |
| <string name="repair_resize">在更改大小之前修复{1}.</string> |
| <string name="unable_resize">无法修改{1}大小.</string> |
| <string name="no_md5_found">无法为 '{1}' 找到MD5校验文件. 请取消允许MD5校验选项.</string> |
| <string name="md5_fail_match">MD5校验失败 '{1}'.</string> |
| <string name="fail_decrypt_tar">解密 tar 文件 '{1}' 失败</string> |
| <string name="format_data_msg">你可能需要重启 recovery 才能使用/data.</string> |
| <string name="format_data_err">无法格式化并删除加密.</string> |
| <string name="formatting_using">使用{2}格式化{1}...</string> |
| <string name="unable_to_wipe">无法清除 {1}.</string> |
| <string name="cannot_wipe">无法清除分区 {1}.</string> |
| <string name="remove_all">移除 '{1}' 下所有文件</string> |
| <string name="wiping_data">清除data不清除/data/media ...</string> |
| <string name="backing_up">正在备份 {1}...</string> |
| <string name="backing">正在备份</string> |
| <string name="backup_size">备份 '{1}' 文件大小为0.</string> |
| <string name="datamedia_fs_restore">WARNING: 这个 /data 备份文件系统为{1}! 除非把文件系统格式设置为{1}不然可能无法启动.</string> |
| <string name="restoring">还原 {1}...</string> |
| <string name="restoring_hdr">正在还原</string> |
| <string name="recreate_folder_err">无法重新创建 {1} 目录.</string> |
| <string name="img_size_err">镜像文件大小大于目标设备</string> |
| <string name="flashing">正在刷入 {1}...</string> |
| <string name="backup_folder_set">备份文件夹设置为 '{1}'</string> |
| <string name="locate_backup_err">无法打开备份 '{1}'</string> |
| <string name="set_restore_opt">设置还原选项: '{1}':</string> |
| <string name="md5_check_skip">跳过MD5校验已打开</string> |
| <string name="ors_encrypt_restore_err">无法使用 ORS 脚本恢复加密备份.</string> |
| <string name="mounting">正在挂载</string> |
| <string name="unmounting">正在卸载</string> |
| <string name="mounted">'{1}' 已挂载</string> |
| <string name="unmounted">'{1}' 已卸载</string> |
| <string name="setting">设置 '{1}' 为 '{2}'</string> |
| <string name="setting_empty">设置 '{1}' 为空</string> |
| <string name="making_dir1">创建目录</string> |
| <string name="making_dir2">创建目录: '{1}'</string> |
| <string name="running_command">运行命令</string> |
| <string name="sideload">ADB 线刷</string> |
| <string name="start_sideload">开始 ADB sideload 功能...</string> |
| <string name="need_new_adb">你的 adb 版本必须 1.0.32 或者更新才能支持.</string> |
| <string name="no_pwd">未提供密码.</string> |
| <string name="done_ors">脚本文件处理完毕</string> |
| <string name="injecttwrp">正在注入 TWRP 到 boot 镜像...</string> |
| <string name="zip_err">安装刷机包文件 '{1}' 出错</string> |
| <string name="installing_zip">正在安装刷机包 '{1}'</string> |
| <string name="select_backup_opt">设置备份选项:</string> |
| <string name="compression_on">压缩选项开</string> |
| <string name="md5_off">关闭生成MD5</string> |
| <string name="backup_fail">备份失败</string> |
| <string name="backup_complete">备份完毕!</string> |
| <string name="running_recovery_commands">运行 Recovery 命令中</string> |
| <string name="recovery_commands_complete">Recovery 命令运行完成</string> |
| <string name="running_ors">运行 ORS 脚本</string> |
| <string name="ors_complete">运行 ORS 脚本完毕</string> |
| <string name="no_updater_binary">刷机包中无法找到 '{1}'.</string> |
| <string name="check_for_md5">检查MD5文件...</string> |
| <string name="fail_sysmap">映射文件 '{1}' 失败</string> |
| <string name="verify_zip_sig">刷机包签名校验...</string> |
| <string name="verify_zip_fail">刷机包签名校验失败!</string> |
| <string name="verify_zip_done">刷机包签名校验成功.</string> |
| <string name="zip_corrupt">刷机包已损坏!</string> |
| <string name="no_md5">跳过MD5校验：无法找到MD5文件</string> |
| <string name="md5_fail">MD5不匹配</string> |
| <string name="md5_match">MD5匹配</string> |
| <string name="pid_signal">{1} 过程结束，信号: {2}</string> |
| <string name="pid_error">{1} 过程结束，错误: {2}</string> |
| <string name="install_dumlock">安装 HTC Dumlock 到系统...</string> |
| <string name="dumlock_restore">恢复原版boot...</string> |
| <string name="dumlock_reflash">重新刷入 recovery 到 boot...</string> |
| <string name="run_script">正在运行 {1} 脚本...</string> |
| <string name="rename_stock">为了避免原版系统替换 TWRP，重命名 /system 下原版 recovery 生成文件.</string> |
| <string name="split_backup">分解备份文件到多个压缩档...</string> |
| <string name="backup_error">创建备份失败.</string> |
| <string name="restore_error">在还原过程中出错.</string> |
| <string name="split_thread">拆分线程ID{1}到档案{2}</string> |
| <!-- These 2 items are saved in the data manager instead of resource manager, so %llu, etc is correct instead of {1} --> |
| <string name="file_progress">%llu 共 %llu 文件, %i%%</string> |
| <string name="size_progress">%lluMB 共 %lluMB, %i%%</string> |
| <string name="decrypt_cmd">试图通过命令行解密数据分区.</string> |
| <string name="base_pkg_err">无法加载基础包.</string> |
| <string name="simulating">正在模拟操作...</string> |
| <string name="backup_cancel">备份已经取消.</string> |
| <string name="config_twrp">正在配置 TWRP...</string> |
| <string name="config_twrp_err">此内核无法配置 TWRP.</string> |
| <string name="copy_log">已经拷贝 recovery 日志到{1}.</string> |
| <string name="max_queue">达到最大压缩队列!</string> |
| <string name="min_queue">达到最小压缩队列!</string> |
| <string name="screenshot_saved">截图已保存在: {1}</string> |
| <string name="screenshot_err">截图失败!</string> |
| <string name="zip_wipe_cache">一个或多个刷机包请求清除 cache -- 立即清除 cache.</string> |
| <string name="and_sec_wipe_err">无法清除android secure</string> |
| <string name="dalvik_wipe_err">清除dalvik失败</string> |
| <string name="auto_gen">(自动生成)</string> |
| <string name="curr_date">(当前日期)</string> |
| <string name="backup_name_len">备份名称太长.</string> |
| <string name="backup_name_invalid">备份名称中 '{1}' 中包含无效字符: '{1}'</string> |
| <string name="no_real_sdcard">设备没有真正的 SD 卡! 中止!</string> |
| <string name="cancel_sideload">取消ADB sideload...</string> |
| <string name="change_fs_err">更换文件系统出错.</string> |
| <string name="theme_ver_err">自定义主题不兼容 TWRP 版本. 请使用官方主题.</string> |
| </resources> |
| </language> |