| /* |
| * Copyright (C) 2015 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <drm_fourcc.h> |
| #include <fcntl.h> |
| #include <stdbool.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/cdefs.h> |
| #include <sys/ioctl.h> |
| #include <sys/mman.h> |
| #include <sys/types.h> |
| #include <unistd.h> |
| #include <xf86drm.h> |
| #include <xf86drmMode.h> |
| |
| #include "minui.h" |
| #include "graphics.h" |
| |
| #define ARRAY_SIZE(A) (sizeof(A)/sizeof(*(A))) |
| |
| struct drm_surface { |
| GRSurface base; |
| uint32_t fb_id; |
| uint32_t handle; |
| }; |
| |
| static drm_surface *drm_surfaces[2]; |
| static int current_buffer; |
| |
| static drmModeCrtc *main_monitor_crtc; |
| static drmModeConnector *main_monitor_connector; |
| |
| static int drm_fd = -1; |
| |
| static void drm_disable_crtc(int drm_fd, drmModeCrtc *crtc) { |
| if (crtc) { |
| drmModeSetCrtc(drm_fd, crtc->crtc_id, |
| 0, // fb_id |
| 0, 0, // x,y |
| NULL, // connectors |
| 0, // connector_count |
| NULL); // mode |
| } |
| } |
| |
| static void drm_enable_crtc(int drm_fd, drmModeCrtc *crtc, |
| struct drm_surface *surface) { |
| int32_t ret; |
| |
| ret = drmModeSetCrtc(drm_fd, crtc->crtc_id, |
| surface->fb_id, |
| 0, 0, // x,y |
| &main_monitor_connector->connector_id, |
| 1, // connector_count |
| &main_monitor_crtc->mode); |
| |
| if (ret) |
| printf("drmModeSetCrtc failed ret=%d\n", ret); |
| } |
| |
| static void drm_blank(minui_backend* backend __unused, bool blank) { |
| if (blank) |
| drm_disable_crtc(drm_fd, main_monitor_crtc); |
| else |
| drm_enable_crtc(drm_fd, main_monitor_crtc, |
| drm_surfaces[current_buffer]); |
| } |
| |
| static void drm_destroy_surface(struct drm_surface *surface) { |
| struct drm_gem_close gem_close; |
| int ret; |
| |
| if(!surface) |
| return; |
| |
| if (surface->base.data) |
| munmap(surface->base.data, |
| surface->base.row_bytes * surface->base.height); |
| |
| if (surface->fb_id) { |
| ret = drmModeRmFB(drm_fd, surface->fb_id); |
| if (ret) |
| printf("drmModeRmFB failed ret=%d\n", ret); |
| } |
| |
| if (surface->handle) { |
| memset(&gem_close, 0, sizeof(gem_close)); |
| gem_close.handle = surface->handle; |
| |
| ret = drmIoctl(drm_fd, DRM_IOCTL_GEM_CLOSE, &gem_close); |
| if (ret) |
| printf("DRM_IOCTL_GEM_CLOSE failed ret=%d\n", ret); |
| } |
| |
| free(surface); |
| } |
| |
| static int drm_format_to_bpp(uint32_t format) { |
| switch(format) { |
| case DRM_FORMAT_ABGR8888: |
| case DRM_FORMAT_BGRA8888: |
| case DRM_FORMAT_RGBX8888: |
| case DRM_FORMAT_BGRX8888: |
| case DRM_FORMAT_XBGR8888: |
| case DRM_FORMAT_ARGB8888: |
| case DRM_FORMAT_XRGB8888: |
| return 32; |
| case DRM_FORMAT_RGB565: |
| return 16; |
| default: |
| printf("Unknown format %d\n", format); |
| return 32; |
| } |
| } |
| |
| static drm_surface *drm_create_surface(int width, int height) { |
| struct drm_surface *surface; |
| struct drm_mode_create_dumb create_dumb; |
| uint32_t format; |
| int ret; |
| |
| surface = (struct drm_surface*)calloc(1, sizeof(*surface)); |
| if (!surface) { |
| printf("Can't allocate memory\n"); |
| return NULL; |
| } |
| |
| #if defined(RECOVERY_ABGR) |
| format = DRM_FORMAT_RGBA8888; |
| #elif defined(RECOVERY_BGRA) |
| format = DRM_FORMAT_ARGB8888; |
| #elif defined(RECOVERY_RGBA) |
| format = DRM_FORMAT_ABGR8888; |
| #elif defined(RECOVERY_RGBX) |
| format = DRM_FORMAT_XBGR8888; |
| #else |
| format = DRM_FORMAT_RGB565; |
| #endif |
| |
| memset(&create_dumb, 0, sizeof(create_dumb)); |
| create_dumb.height = height; |
| create_dumb.width = width; |
| create_dumb.bpp = drm_format_to_bpp(format); |
| create_dumb.flags = 0; |
| |
| ret = drmIoctl(drm_fd, DRM_IOCTL_MODE_CREATE_DUMB, &create_dumb); |
| if (ret) { |
| printf("DRM_IOCTL_MODE_CREATE_DUMB failed ret=%d\n",ret); |
| drm_destroy_surface(surface); |
| return NULL; |
| } |
| surface->handle = create_dumb.handle; |
| |
| uint32_t handles[4], pitches[4], offsets[4]; |
| |
| handles[0] = surface->handle; |
| pitches[0] = create_dumb.pitch; |
| offsets[0] = 0; |
| |
| ret = drmModeAddFB2(drm_fd, width, height, |
| format, handles, pitches, offsets, |
| &(surface->fb_id), 0); |
| if (ret) { |
| printf("drmModeAddFB2 failed ret=%d\n", ret); |
| drm_destroy_surface(surface); |
| return NULL; |
| } |
| |
| struct drm_mode_map_dumb map_dumb; |
| memset(&map_dumb, 0, sizeof(map_dumb)); |
| map_dumb.handle = create_dumb.handle; |
| ret = drmIoctl(drm_fd, DRM_IOCTL_MODE_MAP_DUMB, &map_dumb); |
| if (ret) { |
| printf("DRM_IOCTL_MODE_MAP_DUMB failed ret=%d\n",ret); |
| drm_destroy_surface(surface); |
| return NULL;; |
| } |
| |
| surface->base.height = height; |
| surface->base.width = width; |
| surface->base.row_bytes = create_dumb.pitch; |
| surface->base.pixel_bytes = create_dumb.bpp / 8; |
| surface->base.data = (unsigned char*) |
| mmap(NULL, |
| surface->base.height * surface->base.row_bytes, |
| PROT_READ | PROT_WRITE, MAP_SHARED, |
| drm_fd, map_dumb.offset); |
| if (surface->base.data == MAP_FAILED) { |
| perror("mmap() failed"); |
| drm_destroy_surface(surface); |
| return NULL; |
| } |
| |
| return surface; |
| } |
| |
| static drmModeCrtc *find_crtc_for_connector(int fd, |
| drmModeRes *resources, |
| drmModeConnector *connector) { |
| int i, j; |
| drmModeEncoder *encoder; |
| int32_t crtc; |
| |
| /* |
| * Find the encoder. If we already have one, just use it. |
| */ |
| if (connector->encoder_id) |
| encoder = drmModeGetEncoder(fd, connector->encoder_id); |
| else |
| encoder = NULL; |
| |
| if (encoder && encoder->crtc_id) { |
| crtc = encoder->crtc_id; |
| drmModeFreeEncoder(encoder); |
| return drmModeGetCrtc(fd, crtc); |
| } |
| |
| /* |
| * Didn't find anything, try to find a crtc and encoder combo. |
| */ |
| crtc = -1; |
| for (i = 0; i < connector->count_encoders; i++) { |
| encoder = drmModeGetEncoder(fd, connector->encoders[i]); |
| |
| if (encoder) { |
| for (j = 0; j < resources->count_crtcs; j++) { |
| if (!(encoder->possible_crtcs & (1 << j))) |
| continue; |
| crtc = resources->crtcs[j]; |
| break; |
| } |
| if (crtc >= 0) { |
| drmModeFreeEncoder(encoder); |
| return drmModeGetCrtc(fd, crtc); |
| } |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static drmModeConnector *find_used_connector_by_type(int fd, |
| drmModeRes *resources, |
| unsigned type) { |
| int i; |
| for (i = 0; i < resources->count_connectors; i++) { |
| drmModeConnector *connector; |
| |
| connector = drmModeGetConnector(fd, resources->connectors[i]); |
| if (connector) { |
| if ((connector->connector_type == type) && |
| (connector->connection == DRM_MODE_CONNECTED) && |
| (connector->count_modes > 0)) |
| return connector; |
| |
| drmModeFreeConnector(connector); |
| } |
| } |
| return NULL; |
| } |
| |
| static drmModeConnector *find_first_connected_connector(int fd, |
| drmModeRes *resources) { |
| int i; |
| for (i = 0; i < resources->count_connectors; i++) { |
| drmModeConnector *connector; |
| |
| connector = drmModeGetConnector(fd, resources->connectors[i]); |
| if (connector) { |
| if ((connector->count_modes > 0) && |
| (connector->connection == DRM_MODE_CONNECTED)) |
| return connector; |
| |
| drmModeFreeConnector(connector); |
| } |
| } |
| return NULL; |
| } |
| |
| static drmModeConnector *find_main_monitor(int fd, drmModeRes *resources, |
| uint32_t *mode_index) { |
| unsigned i = 0; |
| int modes; |
| /* Look for LVDS/eDP/DSI connectors. Those are the main screens. */ |
| unsigned kConnectorPriority[] = { |
| DRM_MODE_CONNECTOR_LVDS, |
| DRM_MODE_CONNECTOR_eDP, |
| DRM_MODE_CONNECTOR_DSI, |
| }; |
| |
| drmModeConnector *main_monitor_connector = NULL; |
| do { |
| main_monitor_connector = find_used_connector_by_type(fd, |
| resources, |
| kConnectorPriority[i]); |
| i++; |
| } while (!main_monitor_connector && i < ARRAY_SIZE(kConnectorPriority)); |
| |
| /* If we didn't find a connector, grab the first one that is connected. */ |
| if (!main_monitor_connector) |
| main_monitor_connector = |
| find_first_connected_connector(fd, resources); |
| |
| /* If we still didn't find a connector, give up and return. */ |
| if (!main_monitor_connector) |
| return NULL; |
| |
| *mode_index = 0; |
| for (modes = 0; modes < main_monitor_connector->count_modes; modes++) { |
| if (main_monitor_connector->modes[modes].type & |
| DRM_MODE_TYPE_PREFERRED) { |
| *mode_index = modes; |
| break; |
| } |
| } |
| |
| return main_monitor_connector; |
| } |
| |
| static void disable_non_main_crtcs(int fd, |
| drmModeRes *resources, |
| drmModeCrtc* main_crtc) { |
| int i; |
| drmModeCrtc* crtc; |
| |
| for (i = 0; i < resources->count_connectors; i++) { |
| drmModeConnector *connector; |
| |
| connector = drmModeGetConnector(fd, resources->connectors[i]); |
| crtc = find_crtc_for_connector(fd, resources, connector); |
| if (crtc->crtc_id != main_crtc->crtc_id) |
| drm_disable_crtc(fd, crtc); |
| drmModeFreeCrtc(crtc); |
| } |
| } |
| |
| static GRSurface* drm_init(minui_backend* backend __unused) { |
| drmModeRes *res = NULL; |
| uint32_t selected_mode; |
| char *dev_name; |
| int width, height; |
| int ret, i; |
| |
| /* Consider DRM devices in order. */ |
| for (i = 0; i < DRM_MAX_MINOR; i++) { |
| uint64_t cap = 0; |
| |
| ret = asprintf(&dev_name, DRM_DEV_NAME, DRM_DIR_NAME, i); |
| if (ret < 0) |
| continue; |
| |
| drm_fd = open(dev_name, O_RDWR, 0); |
| free(dev_name); |
| if (drm_fd < 0) |
| continue; |
| |
| /* We need dumb buffers. */ |
| ret = drmGetCap(drm_fd, DRM_CAP_DUMB_BUFFER, &cap); |
| if (ret || cap == 0) { |
| close(drm_fd); |
| continue; |
| } |
| |
| res = drmModeGetResources(drm_fd); |
| if (!res) { |
| close(drm_fd); |
| continue; |
| } |
| |
| /* Use this device if it has at least one connected monitor. */ |
| if (res->count_crtcs > 0 && res->count_connectors > 0) |
| if (find_first_connected_connector(drm_fd, res)) |
| break; |
| |
| drmModeFreeResources(res); |
| close(drm_fd); |
| res = NULL; |
| } |
| |
| if (drm_fd < 0 || res == NULL) { |
| perror("cannot find/open a drm device"); |
| return NULL; |
| } |
| |
| main_monitor_connector = find_main_monitor(drm_fd, |
| res, &selected_mode); |
| |
| if (!main_monitor_connector) { |
| printf("main_monitor_connector not found\n"); |
| drmModeFreeResources(res); |
| close(drm_fd); |
| return NULL; |
| } |
| |
| main_monitor_crtc = find_crtc_for_connector(drm_fd, res, |
| main_monitor_connector); |
| |
| if (!main_monitor_crtc) { |
| printf("main_monitor_crtc not found\n"); |
| drmModeFreeResources(res); |
| close(drm_fd); |
| return NULL; |
| } |
| |
| disable_non_main_crtcs(drm_fd, |
| res, main_monitor_crtc); |
| |
| main_monitor_crtc->mode = main_monitor_connector->modes[selected_mode]; |
| |
| width = main_monitor_crtc->mode.hdisplay; |
| height = main_monitor_crtc->mode.vdisplay; |
| |
| drmModeFreeResources(res); |
| |
| drm_surfaces[0] = drm_create_surface(width, height); |
| drm_surfaces[1] = drm_create_surface(width, height); |
| if (!drm_surfaces[0] || !drm_surfaces[1]) { |
| drm_destroy_surface(drm_surfaces[0]); |
| drm_destroy_surface(drm_surfaces[1]); |
| drmModeFreeResources(res); |
| close(drm_fd); |
| return NULL; |
| } |
| |
| current_buffer = 0; |
| |
| drm_enable_crtc(drm_fd, main_monitor_crtc, drm_surfaces[1]); |
| |
| return &(drm_surfaces[0]->base); |
| } |
| |
| static GRSurface* drm_flip(minui_backend* backend __unused) { |
| int ret; |
| |
| ret = drmModePageFlip(drm_fd, main_monitor_crtc->crtc_id, |
| drm_surfaces[current_buffer]->fb_id, 0, NULL); |
| if (ret < 0) { |
| printf("drmModePageFlip failed ret=%d\n", ret); |
| return NULL; |
| } |
| current_buffer = 1 - current_buffer; |
| return &(drm_surfaces[current_buffer]->base); |
| } |
| |
| static void drm_exit(minui_backend* backend __unused) { |
| drm_disable_crtc(drm_fd, main_monitor_crtc); |
| drm_destroy_surface(drm_surfaces[0]); |
| drm_destroy_surface(drm_surfaces[1]); |
| drmModeFreeCrtc(main_monitor_crtc); |
| drmModeFreeConnector(main_monitor_connector); |
| close(drm_fd); |
| drm_fd = -1; |
| } |
| |
| static minui_backend drm_backend = { |
| .init = drm_init, |
| .flip = drm_flip, |
| .blank = drm_blank, |
| .exit = drm_exit, |
| }; |
| |
| minui_backend* open_drm() { |
| return &drm_backend; |
| } |