| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "applypatch/applypatch.h" |
| |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <libgen.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/stat.h> |
| #include <sys/statfs.h> |
| #include <sys/types.h> |
| #include <unistd.h> |
| |
| #include <functional> |
| #include <memory> |
| #include <string> |
| #include <utility> |
| #include <vector> |
| |
| #include <android-base/logging.h> |
| #include <android-base/parseint.h> |
| #include <android-base/strings.h> |
| #include <openssl/sha.h> |
| |
| #include "edify/expr.h" |
| #include "otafault/ota_io.h" |
| #include "otautil/paths.h" |
| #include "otautil/print_sha1.h" |
| |
| static int LoadPartitionContents(const std::string& filename, FileContents* file); |
| static size_t FileSink(const unsigned char* data, size_t len, int fd); |
| static int GenerateTarget(const FileContents& source_file, const std::unique_ptr<Value>& patch, |
| const std::string& target_filename, |
| const uint8_t target_sha1[SHA_DIGEST_LENGTH], const Value* bonus_data); |
| |
| int LoadFileContents(const std::string& filename, FileContents* file) { |
| // A special 'filename' beginning with "EMMC:" means to load the contents of a partition. |
| if (android::base::StartsWith(filename, "EMMC:")) { |
| return LoadPartitionContents(filename, file); |
| } |
| |
| struct stat sb; |
| if (stat(filename.c_str(), &sb) == -1) { |
| PLOG(ERROR) << "Failed to stat \"" << filename << "\""; |
| return -1; |
| } |
| |
| std::vector<unsigned char> data(sb.st_size); |
| unique_file f(ota_fopen(filename.c_str(), "rb")); |
| if (!f) { |
| PLOG(ERROR) << "Failed to open \"" << filename << "\""; |
| return -1; |
| } |
| |
| size_t bytes_read = ota_fread(data.data(), 1, data.size(), f.get()); |
| if (bytes_read != data.size()) { |
| LOG(ERROR) << "Short read of \"" << filename << "\" (" << bytes_read << " bytes of " |
| << data.size() << ")"; |
| return -1; |
| } |
| file->data = std::move(data); |
| SHA1(file->data.data(), file->data.size(), file->sha1); |
| return 0; |
| } |
| |
| // Loads the contents of an EMMC partition into the provided FileContents. filename should be a |
| // string of the form "EMMC:<partition_device>:...". The smallest size_n bytes for which that prefix |
| // of the partition contents has the corresponding sha1 hash will be loaded. It is acceptable for a |
| // size value to be repeated with different sha1s. Returns 0 on success. |
| // |
| // This complexity is needed because if an OTA installation is interrupted, the partition might |
| // contain either the source or the target data, which might be of different lengths. We need to |
| // know the length in order to read from a partition (there is no "end-of-file" marker), so the |
| // caller must specify the possible lengths and the hash of the data, and we'll do the load |
| // expecting to find one of those hashes. |
| static int LoadPartitionContents(const std::string& filename, FileContents* file) { |
| std::vector<std::string> pieces = android::base::Split(filename, ":"); |
| if (pieces.size() < 4 || pieces.size() % 2 != 0 || pieces[0] != "EMMC") { |
| LOG(ERROR) << "LoadPartitionContents called with bad filename \"" << filename << "\""; |
| return -1; |
| } |
| |
| size_t pair_count = (pieces.size() - 2) / 2; // # of (size, sha1) pairs in filename |
| std::vector<std::pair<size_t, std::string>> pairs; |
| for (size_t i = 0; i < pair_count; ++i) { |
| size_t size; |
| if (!android::base::ParseUint(pieces[i * 2 + 2], &size) || size == 0) { |
| LOG(ERROR) << "LoadPartitionContents called with bad size \"" << pieces[i * 2 + 2] << "\""; |
| return -1; |
| } |
| pairs.push_back({ size, pieces[i * 2 + 3] }); |
| } |
| |
| // Sort the pairs array so that they are in order of increasing size. |
| std::sort(pairs.begin(), pairs.end()); |
| |
| const char* partition = pieces[1].c_str(); |
| unique_file dev(ota_fopen(partition, "rb")); |
| if (!dev) { |
| PLOG(ERROR) << "Failed to open eMMC partition \"" << partition << "\""; |
| return -1; |
| } |
| |
| SHA_CTX sha_ctx; |
| SHA1_Init(&sha_ctx); |
| |
| // Allocate enough memory to hold the largest size. |
| std::vector<unsigned char> buffer(pairs[pair_count - 1].first); |
| unsigned char* buffer_ptr = buffer.data(); |
| size_t buffer_size = 0; // # bytes read so far |
| bool found = false; |
| |
| for (const auto& pair : pairs) { |
| size_t current_size = pair.first; |
| const std::string& current_sha1 = pair.second; |
| |
| // Read enough additional bytes to get us up to the next size. (Again, |
| // we're trying the possibilities in order of increasing size). |
| size_t next = current_size - buffer_size; |
| if (next > 0) { |
| size_t read = ota_fread(buffer_ptr, 1, next, dev.get()); |
| if (next != read) { |
| LOG(ERROR) << "Short read (" << read << " bytes of " << next << ") for partition \"" |
| << partition << "\""; |
| return -1; |
| } |
| SHA1_Update(&sha_ctx, buffer_ptr, read); |
| buffer_size += read; |
| buffer_ptr += read; |
| } |
| |
| // Duplicate the SHA context and finalize the duplicate so we can |
| // check it against this pair's expected hash. |
| SHA_CTX temp_ctx; |
| memcpy(&temp_ctx, &sha_ctx, sizeof(SHA_CTX)); |
| uint8_t sha_so_far[SHA_DIGEST_LENGTH]; |
| SHA1_Final(sha_so_far, &temp_ctx); |
| |
| uint8_t parsed_sha[SHA_DIGEST_LENGTH]; |
| if (ParseSha1(current_sha1, parsed_sha) != 0) { |
| LOG(ERROR) << "Failed to parse SHA-1 \"" << current_sha1 << "\" in " << filename; |
| return -1; |
| } |
| |
| if (memcmp(sha_so_far, parsed_sha, SHA_DIGEST_LENGTH) == 0) { |
| // We have a match. Stop reading the partition; we'll return the data we've read so far. |
| LOG(INFO) << "Partition read matched size " << current_size << " SHA-1 " << current_sha1; |
| found = true; |
| break; |
| } |
| } |
| |
| if (!found) { |
| // Ran off the end of the list of (size, sha1) pairs without finding a match. |
| LOG(ERROR) << "Contents of partition \"" << partition << "\" didn't match " << filename; |
| return -1; |
| } |
| |
| SHA1_Final(file->sha1, &sha_ctx); |
| |
| buffer.resize(buffer_size); |
| file->data = std::move(buffer); |
| |
| return 0; |
| } |
| |
| int SaveFileContents(const std::string& filename, const FileContents* file) { |
| unique_fd fd( |
| ota_open(filename.c_str(), O_WRONLY | O_CREAT | O_TRUNC | O_SYNC, S_IRUSR | S_IWUSR)); |
| if (fd == -1) { |
| PLOG(ERROR) << "Failed to open \"" << filename << "\" for write"; |
| return -1; |
| } |
| |
| size_t bytes_written = FileSink(file->data.data(), file->data.size(), fd); |
| if (bytes_written != file->data.size()) { |
| PLOG(ERROR) << "Short write of \"" << filename << "\" (" << bytes_written << " bytes of " |
| << file->data.size(); |
| return -1; |
| } |
| if (ota_fsync(fd) != 0) { |
| PLOG(ERROR) << "Failed to fsync \"" << filename << "\""; |
| return -1; |
| } |
| if (ota_close(fd) != 0) { |
| PLOG(ERROR) << "Failed to close \"" << filename << "\""; |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| // Writes a memory buffer to 'target' partition, a string of the form |
| // "EMMC:<partition_device>[:...]". The target name might contain multiple colons, but |
| // WriteToPartition() only uses the first two and ignores the rest. Returns 0 on success. |
| static int WriteToPartition(const unsigned char* data, size_t len, const std::string& target) { |
| std::vector<std::string> pieces = android::base::Split(target, ":"); |
| if (pieces.size() < 2 || pieces[0] != "EMMC") { |
| LOG(ERROR) << "WriteToPartition called with bad target \"" << target << "\""; |
| return -1; |
| } |
| |
| const char* partition = pieces[1].c_str(); |
| unique_fd fd(ota_open(partition, O_RDWR)); |
| if (fd == -1) { |
| PLOG(ERROR) << "Failed to open \"" << partition << "\""; |
| return -1; |
| } |
| |
| size_t start = 0; |
| bool success = false; |
| for (size_t attempt = 0; attempt < 2; ++attempt) { |
| if (TEMP_FAILURE_RETRY(lseek(fd, start, SEEK_SET)) == -1) { |
| PLOG(ERROR) << "Failed to seek to " << start << " on \"" << partition << "\""; |
| return -1; |
| } |
| while (start < len) { |
| size_t to_write = len - start; |
| if (to_write > 1 << 20) to_write = 1 << 20; |
| |
| ssize_t written = TEMP_FAILURE_RETRY(ota_write(fd, data + start, to_write)); |
| if (written == -1) { |
| PLOG(ERROR) << "Failed to write to \"" << partition << "\""; |
| return -1; |
| } |
| start += written; |
| } |
| |
| if (ota_fsync(fd) != 0) { |
| PLOG(ERROR) << "Failed to sync \"" << partition << "\""; |
| return -1; |
| } |
| if (ota_close(fd) != 0) { |
| PLOG(ERROR) << "Failed to close \"" << partition << "\""; |
| return -1; |
| } |
| |
| fd.reset(ota_open(partition, O_RDONLY)); |
| if (fd == -1) { |
| PLOG(ERROR) << "Failed to reopen \"" << partition << "\" for verification"; |
| return -1; |
| } |
| |
| // Drop caches so our subsequent verification read won't just be reading the cache. |
| sync(); |
| unique_fd dc(ota_open("/proc/sys/vm/drop_caches", O_WRONLY)); |
| if (TEMP_FAILURE_RETRY(ota_write(dc, "3\n", 2)) == -1) { |
| PLOG(ERROR) << "Failed to write to /proc/sys/vm/drop_caches"; |
| } else { |
| LOG(INFO) << " caches dropped"; |
| } |
| ota_close(dc); |
| sleep(1); |
| |
| // Verify. |
| if (TEMP_FAILURE_RETRY(lseek(fd, 0, SEEK_SET)) == -1) { |
| PLOG(ERROR) << "Failed to seek to 0 on " << partition; |
| return -1; |
| } |
| |
| unsigned char buffer[4096]; |
| start = len; |
| for (size_t p = 0; p < len; p += sizeof(buffer)) { |
| size_t to_read = len - p; |
| if (to_read > sizeof(buffer)) { |
| to_read = sizeof(buffer); |
| } |
| |
| size_t so_far = 0; |
| while (so_far < to_read) { |
| ssize_t read_count = TEMP_FAILURE_RETRY(ota_read(fd, buffer + so_far, to_read - so_far)); |
| if (read_count == -1) { |
| PLOG(ERROR) << "Failed to verify-read " << partition << " at " << p; |
| return -1; |
| } else if (read_count == 0) { |
| LOG(ERROR) << "Verify-reading " << partition << " reached unexpected EOF at " << p; |
| return -1; |
| } |
| if (static_cast<size_t>(read_count) < to_read) { |
| LOG(INFO) << "Short verify-read " << partition << " at " << p << ": expected " << to_read |
| << " actual " << read_count; |
| } |
| so_far += read_count; |
| } |
| |
| if (memcmp(buffer, data + p, to_read) != 0) { |
| LOG(ERROR) << "Verification failed starting at " << p; |
| start = p; |
| break; |
| } |
| } |
| |
| if (start == len) { |
| LOG(INFO) << "Verification read succeeded (attempt " << attempt + 1 << ")"; |
| success = true; |
| break; |
| } |
| |
| if (ota_close(fd) != 0) { |
| PLOG(ERROR) << "Failed to close " << partition; |
| return -1; |
| } |
| |
| fd.reset(ota_open(partition, O_RDWR)); |
| if (fd == -1) { |
| PLOG(ERROR) << "Failed to reopen " << partition << " for next attempt"; |
| return -1; |
| } |
| } |
| |
| if (!success) { |
| LOG(ERROR) << "Failed to verify after all attempts"; |
| return -1; |
| } |
| |
| if (ota_close(fd) == -1) { |
| PLOG(ERROR) << "Failed to close " << partition; |
| return -1; |
| } |
| sync(); |
| |
| return 0; |
| } |
| |
| int ParseSha1(const std::string& str, uint8_t* digest) { |
| const char* ps = str.c_str(); |
| uint8_t* pd = digest; |
| for (int i = 0; i < SHA_DIGEST_LENGTH * 2; ++i, ++ps) { |
| int digit; |
| if (*ps >= '0' && *ps <= '9') { |
| digit = *ps - '0'; |
| } else if (*ps >= 'a' && *ps <= 'f') { |
| digit = *ps - 'a' + 10; |
| } else if (*ps >= 'A' && *ps <= 'F') { |
| digit = *ps - 'A' + 10; |
| } else { |
| return -1; |
| } |
| if (i % 2 == 0) { |
| *pd = digit << 4; |
| } else { |
| *pd |= digit; |
| ++pd; |
| } |
| } |
| if (*ps != '\0') return -1; |
| return 0; |
| } |
| |
| // Searches a vector of SHA-1 strings for one matching the given SHA-1. Returns the index of the |
| // match on success, or -1 if no match is found. |
| static int FindMatchingPatch(const uint8_t* sha1, const std::vector<std::string>& patch_sha1s) { |
| for (size_t i = 0; i < patch_sha1s.size(); ++i) { |
| uint8_t patch_sha1[SHA_DIGEST_LENGTH]; |
| if (ParseSha1(patch_sha1s[i], patch_sha1) == 0 && |
| memcmp(patch_sha1, sha1, SHA_DIGEST_LENGTH) == 0) { |
| return i; |
| } |
| } |
| return -1; |
| } |
| |
| int applypatch_check(const std::string& filename, const std::vector<std::string>& sha1s) { |
| if (!android::base::StartsWith(filename, "EMMC:")) { |
| return 1; |
| } |
| |
| // The check will pass if LoadPartitionContents is successful, because the filename already |
| // encodes the desired SHA-1s. |
| FileContents file; |
| if (LoadPartitionContents(filename, &file) != 0) { |
| LOG(INFO) << "\"" << filename << "\" doesn't have any of expected SHA-1 sums; checking cache"; |
| |
| // If the partition is corrupted, it might be because we were killed in the middle of patching |
| // it. A copy should have been made in cache_temp_source. If that file exists and matches the |
| // SHA-1 we're looking for, the check still passes. |
| if (LoadFileContents(Paths::Get().cache_temp_source(), &file) != 0) { |
| LOG(ERROR) << "Failed to load cache file"; |
| return 1; |
| } |
| |
| if (FindMatchingPatch(file.sha1, sha1s) < 0) { |
| LOG(ERROR) << "The cache bits don't match any SHA-1 for \"" << filename << "\""; |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| int ShowLicenses() { |
| ShowBSDiffLicense(); |
| return 0; |
| } |
| |
| static size_t FileSink(const unsigned char* data, size_t len, int fd) { |
| size_t done = 0; |
| while (done < len) { |
| ssize_t wrote = TEMP_FAILURE_RETRY(ota_write(fd, data + done, len - done)); |
| if (wrote == -1) { |
| PLOG(ERROR) << "Failed to write " << len - done << " bytes"; |
| return done; |
| } |
| done += wrote; |
| } |
| return done; |
| } |
| |
| size_t FreeSpaceForFile(const std::string& filename) { |
| struct statfs sf; |
| if (statfs(filename.c_str(), &sf) != 0) { |
| PLOG(ERROR) << "Failed to statfs " << filename; |
| return -1; |
| } |
| return sf.f_bsize * sf.f_bavail; |
| } |
| |
| int CacheSizeCheck(size_t bytes) { |
| if (MakeFreeSpaceOnCache(bytes) < 0) { |
| LOG(ERROR) << "Failed to make " << bytes << " bytes available on /cache"; |
| return 1; |
| } |
| return 0; |
| } |
| |
| int applypatch(const char* source_filename, const char* target_filename, |
| const char* target_sha1_str, size_t /* target_size */, |
| const std::vector<std::string>& patch_sha1s, |
| const std::vector<std::unique_ptr<Value>>& patch_data, const Value* bonus_data) { |
| LOG(INFO) << "Patching " << source_filename; |
| |
| if (target_filename[0] == '-' && target_filename[1] == '\0') { |
| target_filename = source_filename; |
| } |
| |
| if (strncmp(target_filename, "EMMC:", 5) != 0) { |
| LOG(ERROR) << "Supporting patching EMMC targets only"; |
| return 1; |
| } |
| |
| uint8_t target_sha1[SHA_DIGEST_LENGTH]; |
| if (ParseSha1(target_sha1_str, target_sha1) != 0) { |
| LOG(ERROR) << "Failed to parse target SHA-1 \"" << target_sha1_str << "\""; |
| return 1; |
| } |
| |
| // We try to load the target file into the source_file object. |
| FileContents source_file; |
| if (LoadFileContents(target_filename, &source_file) == 0) { |
| if (memcmp(source_file.sha1, target_sha1, SHA_DIGEST_LENGTH) == 0) { |
| // The early-exit case: the patch was already applied, this file has the desired hash, nothing |
| // for us to do. |
| LOG(INFO) << " already " << short_sha1(target_sha1); |
| return 0; |
| } |
| } |
| |
| if (source_file.data.empty() || |
| (target_filename != source_filename && strcmp(target_filename, source_filename) != 0)) { |
| // Need to load the source file: either we failed to load the target file, or we did but it's |
| // different from the expected. |
| source_file.data.clear(); |
| LoadFileContents(source_filename, &source_file); |
| } |
| |
| if (!source_file.data.empty()) { |
| int to_use = FindMatchingPatch(source_file.sha1, patch_sha1s); |
| if (to_use != -1) { |
| return GenerateTarget(source_file, patch_data[to_use], target_filename, target_sha1, |
| bonus_data); |
| } |
| } |
| |
| LOG(INFO) << "Source file is bad; trying copy"; |
| |
| FileContents copy_file; |
| if (LoadFileContents(Paths::Get().cache_temp_source(), ©_file) < 0) { |
| LOG(ERROR) << "Failed to read copy file"; |
| return 1; |
| } |
| |
| int to_use = FindMatchingPatch(copy_file.sha1, patch_sha1s); |
| if (to_use == -1) { |
| LOG(ERROR) << "The copy on /cache doesn't match source SHA-1s either"; |
| return 1; |
| } |
| |
| return GenerateTarget(copy_file, patch_data[to_use], target_filename, target_sha1, bonus_data); |
| } |
| |
| int applypatch_flash(const char* source_filename, const char* target_filename, |
| const char* target_sha1_str, size_t target_size) { |
| LOG(INFO) << "Flashing " << target_filename; |
| |
| uint8_t target_sha1[SHA_DIGEST_LENGTH]; |
| if (ParseSha1(target_sha1_str, target_sha1) != 0) { |
| LOG(ERROR) << "Failed to parse target SHA-1 \"" << target_sha1_str << "\""; |
| return 1; |
| } |
| |
| std::string target_str(target_filename); |
| std::vector<std::string> pieces = android::base::Split(target_str, ":"); |
| if (pieces.size() != 2 || pieces[0] != "EMMC") { |
| LOG(ERROR) << "Invalid target name \"" << target_filename << "\""; |
| return 1; |
| } |
| |
| // Load the target into the source_file object to see if already applied. |
| pieces.push_back(std::to_string(target_size)); |
| pieces.push_back(target_sha1_str); |
| std::string fullname = android::base::Join(pieces, ':'); |
| FileContents source_file; |
| if (LoadPartitionContents(fullname, &source_file) == 0 && |
| memcmp(source_file.sha1, target_sha1, SHA_DIGEST_LENGTH) == 0) { |
| // The early-exit case: the image was already applied, this partition has the desired hash, |
| // nothing for us to do. |
| LOG(INFO) << " already " << short_sha1(target_sha1); |
| return 0; |
| } |
| |
| if (LoadFileContents(source_filename, &source_file) == 0) { |
| if (memcmp(source_file.sha1, target_sha1, SHA_DIGEST_LENGTH) != 0) { |
| // The source doesn't have desired checksum. |
| LOG(ERROR) << "source \"" << source_filename << "\" doesn't have expected SHA-1 sum"; |
| LOG(ERROR) << "expected: " << short_sha1(target_sha1) |
| << ", found: " << short_sha1(source_file.sha1); |
| return 1; |
| } |
| } |
| |
| if (WriteToPartition(source_file.data.data(), target_size, target_filename) != 0) { |
| LOG(ERROR) << "Failed to write copied data to " << target_filename; |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int GenerateTarget(const FileContents& source_file, const std::unique_ptr<Value>& patch, |
| const std::string& target_filename, |
| const uint8_t target_sha1[SHA_DIGEST_LENGTH], const Value* bonus_data) { |
| if (patch->type != Value::Type::BLOB) { |
| LOG(ERROR) << "patch is not a blob"; |
| return 1; |
| } |
| |
| const char* header = &patch->data[0]; |
| size_t header_bytes_read = patch->data.size(); |
| bool use_bsdiff = false; |
| if (header_bytes_read >= 8 && memcmp(header, "BSDIFF40", 8) == 0) { |
| use_bsdiff = true; |
| } else if (header_bytes_read >= 8 && memcmp(header, "IMGDIFF2", 8) == 0) { |
| use_bsdiff = false; |
| } else { |
| LOG(ERROR) << "Unknown patch file format"; |
| return 1; |
| } |
| |
| CHECK(android::base::StartsWith(target_filename, "EMMC:")); |
| |
| // We still write the original source to cache, in case the partition write is interrupted. |
| if (MakeFreeSpaceOnCache(source_file.data.size()) < 0) { |
| LOG(ERROR) << "Not enough free space on /cache"; |
| return 1; |
| } |
| if (SaveFileContents(Paths::Get().cache_temp_source(), &source_file) < 0) { |
| LOG(ERROR) << "Failed to back up source file"; |
| return 1; |
| } |
| |
| // We store the decoded output in memory. |
| std::string memory_sink_str; // Don't need to reserve space. |
| SHA_CTX ctx; |
| SHA1_Init(&ctx); |
| SinkFn sink = [&memory_sink_str, &ctx](const unsigned char* data, size_t len) { |
| SHA1_Update(&ctx, data, len); |
| memory_sink_str.append(reinterpret_cast<const char*>(data), len); |
| return len; |
| }; |
| |
| int result; |
| if (use_bsdiff) { |
| result = ApplyBSDiffPatch(source_file.data.data(), source_file.data.size(), *patch, 0, sink); |
| } else { |
| result = |
| ApplyImagePatch(source_file.data.data(), source_file.data.size(), *patch, sink, bonus_data); |
| } |
| |
| if (result != 0) { |
| LOG(ERROR) << "Failed to apply the patch: " << result; |
| return 1; |
| } |
| |
| uint8_t current_target_sha1[SHA_DIGEST_LENGTH]; |
| SHA1_Final(current_target_sha1, &ctx); |
| if (memcmp(current_target_sha1, target_sha1, SHA_DIGEST_LENGTH) != 0) { |
| LOG(ERROR) << "Patching did not produce the expected SHA-1 of " << short_sha1(target_sha1); |
| |
| LOG(ERROR) << "target size " << memory_sink_str.size() << " SHA-1 " |
| << short_sha1(current_target_sha1); |
| LOG(ERROR) << "source size " << source_file.data.size() << " SHA-1 " |
| << short_sha1(source_file.sha1); |
| |
| uint8_t patch_digest[SHA_DIGEST_LENGTH]; |
| SHA1(reinterpret_cast<const uint8_t*>(patch->data.data()), patch->data.size(), patch_digest); |
| LOG(ERROR) << "patch size " << patch->data.size() << " SHA-1 " << short_sha1(patch_digest); |
| |
| if (bonus_data != nullptr) { |
| uint8_t bonus_digest[SHA_DIGEST_LENGTH]; |
| SHA1(reinterpret_cast<const uint8_t*>(bonus_data->data.data()), bonus_data->data.size(), |
| bonus_digest); |
| LOG(ERROR) << "bonus size " << bonus_data->data.size() << " SHA-1 " |
| << short_sha1(bonus_digest); |
| } |
| |
| return 1; |
| } else { |
| LOG(INFO) << " now " << short_sha1(target_sha1); |
| } |
| |
| // Write back the temp file to the partition. |
| if (WriteToPartition(reinterpret_cast<const unsigned char*>(memory_sink_str.c_str()), |
| memory_sink_str.size(), target_filename) != 0) { |
| LOG(ERROR) << "Failed to write patched data to " << target_filename; |
| return 1; |
| } |
| |
| // Delete the backup copy of the source. |
| unlink(Paths::Get().cache_temp_source().c_str()); |
| |
| // Success! |
| return 0; |
| } |