crypto/ext4crypt/MetadataCrypt.cpp - android_bootable_recovery - Gitiles

 /*
  * Copyright (C) 2016 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #include "KeyBuffer.h"
 #include "MetadataCrypt.h"

 #include <string>
 #include <thread>
 #include <vector>
 #include <algorithm>

 #include <fcntl.h>
 #include <sys/ioctl.h>
 #include <sys/param.h>
 #include <sys/stat.h>
 #include <sys/types.h>

 #include <linux/dm-ioctl.h>

 //#include <android-base/logging.h>
 #include <android-base/properties.h>
 #include <android-base/unique_fd.h>
 #include <cutils/fs.h>
 //#include <fs_mgr.h>

 //#include "EncryptInplace.h"
 #include "KeyStorage4.h"
 #include "KeyUtil.h"
 //#include "secontext.h"
 #include "Utils.h"
 //#include "VoldUtil.h"

 #include <iostream>
 #define LOG(x) std::cout
 #define PLOG(x) std::cout
 #include <linux/fs.h>

 #define DM_CRYPT_BUF_SIZE 4096
 #define TABLE_LOAD_RETRIES 10
 #define DEFAULT_KEY_TARGET_TYPE "default-key"

 using android::vold::KeyBuffer;

 static const std::string kDmNameUserdata = "userdata";

 void get_blkdev_size(int fd, unsigned long* nr_sec) {
   if ((ioctl(fd, BLKGETSIZE, nr_sec)) == -1) {
     *nr_sec = 0;
   }
 }

 static const char* kLookup = "0123456789abcdef";

 android::status_t StrToHex(const KeyBuffer& str, KeyBuffer& hex) {
     hex.clear();
     for (size_t i = 0; i < str.size(); i++) {
         hex.push_back(kLookup[(str.data()[i] & 0xF0) >> 4]);
         hex.push_back(kLookup[str.data()[i] & 0x0F]);
     }
     return android::OK;
 }

 /*static bool mount_via_fs_mgr(const char* mount_point, const char* blk_device) {
     // fs_mgr_do_mount runs fsck. Use setexeccon to run trusted
     // partitions in the fsck domain.
     if (setexeccon(secontextFsck())) {
         PLOG(ERROR) << "Failed to setexeccon";
         return false;
     }
     auto mount_rc = fs_mgr_do_mount(fstab_default, const_cast<char*>(mount_point),
                                     const_cast<char*>(blk_device), nullptr);
     if (setexeccon(nullptr)) {
         PLOG(ERROR) << "Failed to clear setexeccon";
         return false;
     }
     if (mount_rc != 0) {
         LOG(ERROR) << "fs_mgr_do_mount failed with rc " << mount_rc;
         return false;
     }
     LOG(DEBUG) << "Mounted " << mount_point;
     return true;
 }*/

 static bool read_key(const std::string& key_dir, bool create_if_absent, KeyBuffer* key) {
     /*if (!data_rec->key_dir) {
         LOG(ERROR) << "Failed to get key_dir";
         return false;
     }
     std::string key_dir = data_rec->key_dir;*/
     auto dir = key_dir + "/key";
     LOG(DEBUG) << "key_dir/key: " << dir << "\n";
     /*if (fs_mkdirs(dir.c_str(), 0700)) {
         PLOG(ERROR) << "Creating directories: " << dir;
         return false;
     }*/
     auto temp = key_dir + "/tmp";
     if (!android::vold::retrieveKey(create_if_absent, dir, temp, key)) return false;
     return true;
 }

 static KeyBuffer default_key_params(const std::string& real_blkdev, const KeyBuffer& key) {
     KeyBuffer hex_key;
     if (/*android::vold::*/StrToHex(key, hex_key) != android::OK) {
         LOG(ERROR) << "Failed to turn key to hex\n";
         return KeyBuffer();
     }
     auto res = KeyBuffer() + "AES-256-XTS " + hex_key + " " + real_blkdev.c_str() + " 0";
     return res;
 }

 static bool get_number_of_sectors(const std::string& real_blkdev, uint64_t *nr_sec) {
     android::base::unique_fd dev_fd(TEMP_FAILURE_RETRY(open(
         real_blkdev.c_str(), O_RDONLY | O_CLOEXEC, 0)));
     if (dev_fd == -1) {
         PLOG(ERROR) << "Unable to open " << real_blkdev << " to measure size\n";
         return false;
     }
     unsigned long res;
     // TODO: should use BLKGETSIZE64
     get_blkdev_size(dev_fd.get(), &res);
     if (res == 0) {
         PLOG(ERROR) << "Unable to measure size of " << real_blkdev << "\n";
         return false;
     }
     *nr_sec = res;
     return true;
 }

 static struct dm_ioctl* dm_ioctl_init(char *buffer, size_t buffer_size,
                                       const std::string& dm_name) {
     if (buffer_size < sizeof(dm_ioctl)) {
         LOG(ERROR) << "dm_ioctl buffer too small\n";
         return nullptr;
     }

     memset(buffer, 0, buffer_size);
     struct dm_ioctl* io = (struct dm_ioctl*) buffer;
     io->data_size = buffer_size;
     io->data_start = sizeof(struct dm_ioctl);
     io->version[0] = 4;
     io->version[1] = 0;
     io->version[2] = 0;
     io->flags = 0;
     dm_name.copy(io->name, sizeof(io->name));
     return io;
 }

 static bool create_crypto_blk_dev(const std::string& dm_name, uint64_t nr_sec,
                                   const std::string& target_type, const KeyBuffer& crypt_params,
                                   std::string* crypto_blkdev) {
     PLOG(INFO) << "starting create_crypto_blk_dev\n";
     android::base::unique_fd dm_fd(TEMP_FAILURE_RETRY(open(
         "/dev/device-mapper", O_RDWR | O_CLOEXEC, 0)));
     if (dm_fd == -1) {
         PLOG(ERROR) << "Cannot open device-mapper\n";
         return false;
     }
     alignas(struct dm_ioctl) char buffer[DM_CRYPT_BUF_SIZE];
     auto io = dm_ioctl_init(buffer, sizeof(buffer), dm_name);
     if (!io || ioctl(dm_fd.get(), DM_DEV_CREATE, io) != 0) {
         PLOG(ERROR) << "Cannot create dm-crypt device " << dm_name << "\n";
         return false;
     }

     // Get the device status, in particular, the name of its device file
     io = dm_ioctl_init(buffer, sizeof(buffer), dm_name);
     if (ioctl(dm_fd.get(), DM_DEV_STATUS, io) != 0) {
         PLOG(ERROR) << "Cannot retrieve dm-crypt device status " << dm_name << "\n";
         return false;
     }
     *crypto_blkdev = std::string() + "/dev/block/dm-" + std::to_string(
         (io->dev & 0xff) | ((io->dev >> 12) & 0xfff00));

     io = dm_ioctl_init(buffer, sizeof(buffer), dm_name);
     size_t paramix = io->data_start + sizeof(struct dm_target_spec);
     size_t nullix = paramix + crypt_params.size();
     size_t endix = (nullix + 1 + 7) & 8; // Add room for \0 and align to 8 byte boundary

     if (endix > sizeof(buffer)) {
         LOG(ERROR) << "crypt_params too big for DM_CRYPT_BUF_SIZE\n";
         return false;
     }

     io->target_count = 1;
     auto tgt = (struct dm_target_spec *) (buffer + io->data_start);
     tgt->status = 0;
     tgt->sector_start = 0;
     tgt->length = nr_sec;
     target_type.copy(tgt->target_type, sizeof(tgt->target_type));
     memcpy(buffer + paramix, crypt_params.data(),
             std::min(crypt_params.size(), sizeof(buffer) - paramix));
     buffer[nullix] = '\0';
     tgt->next = endix;

     for (int i = 0; ; i++) {
         if (ioctl(dm_fd.get(), DM_TABLE_LOAD, io) == 0) {
             break;
         }
         if (i+1 >= TABLE_LOAD_RETRIES) {
             PLOG(ERROR) << "DM_TABLE_LOAD ioctl failed\n";
             return false;
         }
         PLOG(INFO) << "DM_TABLE_LOAD ioctl failed, retrying\n";
         usleep(500000);
     }

     // Resume this device to activate it
     io = dm_ioctl_init(buffer, sizeof(buffer), dm_name);
     if (ioctl(dm_fd.get(), DM_DEV_SUSPEND, io)) {
         PLOG(ERROR) << "Cannot resume dm-crypt device " << dm_name << "\n";
         return false;
     }
     return true;
 }

 bool e4crypt_mount_metadata_encrypted(const std::string& mount_point, bool needs_encrypt, const std::string& key_dir, const std::string& blk_device, std::string* crypto_blkdev) {
     LOG(DEBUG) << "e4crypt_mount_metadata_encrypted: " << mount_point << " " << needs_encrypt << "\n";
     /*auto encrypted_state = android::base::GetProperty("ro.crypto.state", "");
     if (encrypted_state != "") {
         LOG(DEBUG) << "e4crypt_enable_crypto got unexpected starting state: " << encrypted_state;
         return false;
     }
     auto data_rec = fs_mgr_get_entry_for_mount_point(fstab_default, mount_point);
     if (!data_rec) {
         LOG(ERROR) << "Failed to get data_rec";
         return false;
     }*/
     KeyBuffer key;
     if (!read_key(key_dir, needs_encrypt, &key)) return false;
     uint64_t nr_sec;
     if (!get_number_of_sectors(blk_device, &nr_sec)) return false;
     //std::string crypto_blkdev;
     if (!create_crypto_blk_dev(kDmNameUserdata, nr_sec, DEFAULT_KEY_TARGET_TYPE,
                                default_key_params(blk_device, key), /*&*/crypto_blkdev))
         return false;
     // FIXME handle the corrupt case
     /*if (needs_encrypt) {
         LOG(INFO) << "Beginning inplace encryption, nr_sec: " << nr_sec;
         off64_t size_already_done = 0;
         auto rc =
             cryptfs_enable_inplace(const_cast<char*>(crypto_blkdev.c_str()), data_rec->blk_device,
                                    nr_sec, &size_already_done, nr_sec, 0, false);
         if (rc != 0) {
             LOG(ERROR) << "Inplace crypto failed with code: " << rc;
             return false;
         }
         if (static_cast<uint64_t>(size_already_done) != nr_sec) {
             LOG(ERROR) << "Inplace crypto only got up to sector: " << size_already_done;
             return false;
         }
         LOG(INFO) << "Inplace encryption complete";
     }

     LOG(DEBUG) << "Mounting metadata-encrypted filesystem:" << mount_point;
     mount_via_fs_mgr(data_rec->mount_point, crypto_blkdev.c_str());*/
     LOG(DEBUG) << "crypto block device '" << *crypto_blkdev << "\n";
     return true;
 }
	/*
	* Copyright (C) 2016 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#include "KeyBuffer.h"
	#include "MetadataCrypt.h"

	#include <string>
	#include <thread>
	#include <vector>
	#include <algorithm>

	#include <fcntl.h>
	#include <sys/ioctl.h>
	#include <sys/param.h>
	#include <sys/stat.h>
	#include <sys/types.h>

	#include <linux/dm-ioctl.h>

	//#include <android-base/logging.h>
	#include <android-base/properties.h>
	#include <android-base/unique_fd.h>
	#include <cutils/fs.h>
	//#include <fs_mgr.h>

	//#include "EncryptInplace.h"
	#include "KeyStorage4.h"
	#include "KeyUtil.h"
	//#include "secontext.h"
	#include "Utils.h"
	//#include "VoldUtil.h"

	#include <iostream>
	#define LOG(x) std::cout
	#define PLOG(x) std::cout
	#include <linux/fs.h>

	#define DM_CRYPT_BUF_SIZE 4096
	#define TABLE_LOAD_RETRIES 10
	#define DEFAULT_KEY_TARGET_TYPE "default-key"

	using android::vold::KeyBuffer;

	static const std::string kDmNameUserdata = "userdata";

	void get_blkdev_size(int fd, unsigned long* nr_sec) {
	if ((ioctl(fd, BLKGETSIZE, nr_sec)) == -1) {
	*nr_sec = 0;
	}
	}

	static const char* kLookup = "0123456789abcdef";

	android::status_t StrToHex(const KeyBuffer& str, KeyBuffer& hex) {
	hex.clear();
	for (size_t i = 0; i < str.size(); i++) {
	hex.push_back(kLookup[(str.data()[i] & 0xF0) >> 4]);
	hex.push_back(kLookup[str.data()[i] & 0x0F]);
	}
	return android::OK;
	}

	/static bool mount_via_fs_mgr(const char mount_point, const char* blk_device) {
	// fs_mgr_do_mount runs fsck. Use setexeccon to run trusted
	// partitions in the fsck domain.
	if (setexeccon(secontextFsck())) {
	PLOG(ERROR) << "Failed to setexeccon";
	return false;
	}
	auto mount_rc = fs_mgr_do_mount(fstab_default, const_cast<char*>(mount_point),
	const_cast<char*>(blk_device), nullptr);
	if (setexeccon(nullptr)) {
	PLOG(ERROR) << "Failed to clear setexeccon";
	return false;
	}
	if (mount_rc != 0) {
	LOG(ERROR) << "fs_mgr_do_mount failed with rc " << mount_rc;
	return false;
	}
	LOG(DEBUG) << "Mounted " << mount_point;
	return true;
	}*/

	static bool read_key(const std::string& key_dir, bool create_if_absent, KeyBuffer* key) {
	/*if (!data_rec->key_dir) {
	LOG(ERROR) << "Failed to get key_dir";
	return false;
	}
	std::string key_dir = data_rec->key_dir;*/
	auto dir = key_dir + "/key";
	LOG(DEBUG) << "key_dir/key: " << dir << "\n";
	/*if (fs_mkdirs(dir.c_str(), 0700)) {
	PLOG(ERROR) << "Creating directories: " << dir;
	return false;
	}*/
	auto temp = key_dir + "/tmp";
	if (!android::vold::retrieveKey(create_if_absent, dir, temp, key)) return false;
	return true;
	}

	static KeyBuffer default_key_params(const std::string& real_blkdev, const KeyBuffer& key) {
	KeyBuffer hex_key;
	if (/android::vold::/StrToHex(key, hex_key) != android::OK) {
	LOG(ERROR) << "Failed to turn key to hex\n";
	return KeyBuffer();
	}
	auto res = KeyBuffer() + "AES-256-XTS " + hex_key + " " + real_blkdev.c_str() + " 0";
	return res;
	}

	static bool get_number_of_sectors(const std::string& real_blkdev, uint64_t *nr_sec) {
	android::base::unique_fd dev_fd(TEMP_FAILURE_RETRY(open(
	real_blkdev.c_str(), O_RDONLY \| O_CLOEXEC, 0)));
	if (dev_fd == -1) {
	PLOG(ERROR) << "Unable to open " << real_blkdev << " to measure size\n";
	return false;
	}
	unsigned long res;
	// TODO: should use BLKGETSIZE64
	get_blkdev_size(dev_fd.get(), &res);
	if (res == 0) {
	PLOG(ERROR) << "Unable to measure size of " << real_blkdev << "\n";
	return false;
	}
	*nr_sec = res;
	return true;
	}

	static struct dm_ioctl* dm_ioctl_init(char *buffer, size_t buffer_size,
	const std::string& dm_name) {
	if (buffer_size < sizeof(dm_ioctl)) {
	LOG(ERROR) << "dm_ioctl buffer too small\n";
	return nullptr;
	}

	memset(buffer, 0, buffer_size);
	struct dm_ioctl* io = (struct dm_ioctl*) buffer;
	io->data_size = buffer_size;
	io->data_start = sizeof(struct dm_ioctl);
	io->version[0] = 4;
	io->version[1] = 0;
	io->version[2] = 0;
	io->flags = 0;
	dm_name.copy(io->name, sizeof(io->name));
	return io;
	}

	static bool create_crypto_blk_dev(const std::string& dm_name, uint64_t nr_sec,
	const std::string& target_type, const KeyBuffer& crypt_params,
	std::string* crypto_blkdev) {
	PLOG(INFO) << "starting create_crypto_blk_dev\n";
	android::base::unique_fd dm_fd(TEMP_FAILURE_RETRY(open(
	"/dev/device-mapper", O_RDWR \| O_CLOEXEC, 0)));
	if (dm_fd == -1) {
	PLOG(ERROR) << "Cannot open device-mapper\n";
	return false;
	}
	alignas(struct dm_ioctl) char buffer[DM_CRYPT_BUF_SIZE];
	auto io = dm_ioctl_init(buffer, sizeof(buffer), dm_name);
	if (!io \|\| ioctl(dm_fd.get(), DM_DEV_CREATE, io) != 0) {
	PLOG(ERROR) << "Cannot create dm-crypt device " << dm_name << "\n";
	return false;
	}

	// Get the device status, in particular, the name of its device file
	io = dm_ioctl_init(buffer, sizeof(buffer), dm_name);
	if (ioctl(dm_fd.get(), DM_DEV_STATUS, io) != 0) {
	PLOG(ERROR) << "Cannot retrieve dm-crypt device status " << dm_name << "\n";
	return false;
	}
	*crypto_blkdev = std::string() + "/dev/block/dm-" + std::to_string(
	(io->dev & 0xff) \| ((io->dev >> 12) & 0xfff00));

	io = dm_ioctl_init(buffer, sizeof(buffer), dm_name);
	size_t paramix = io->data_start + sizeof(struct dm_target_spec);
	size_t nullix = paramix + crypt_params.size();
	size_t endix = (nullix + 1 + 7) & 8; // Add room for \0 and align to 8 byte boundary

	if (endix > sizeof(buffer)) {
	LOG(ERROR) << "crypt_params too big for DM_CRYPT_BUF_SIZE\n";
	return false;
	}

	io->target_count = 1;
	auto tgt = (struct dm_target_spec *) (buffer + io->data_start);
	tgt->status = 0;
	tgt->sector_start = 0;
	tgt->length = nr_sec;
	target_type.copy(tgt->target_type, sizeof(tgt->target_type));
	memcpy(buffer + paramix, crypt_params.data(),
	std::min(crypt_params.size(), sizeof(buffer) - paramix));
	buffer[nullix] = '\0';
	tgt->next = endix;

	for (int i = 0; ; i++) {
	if (ioctl(dm_fd.get(), DM_TABLE_LOAD, io) == 0) {
	break;
	}
	if (i+1 >= TABLE_LOAD_RETRIES) {
	PLOG(ERROR) << "DM_TABLE_LOAD ioctl failed\n";
	return false;
	}
	PLOG(INFO) << "DM_TABLE_LOAD ioctl failed, retrying\n";
	usleep(500000);
	}

	// Resume this device to activate it
	io = dm_ioctl_init(buffer, sizeof(buffer), dm_name);
	if (ioctl(dm_fd.get(), DM_DEV_SUSPEND, io)) {
	PLOG(ERROR) << "Cannot resume dm-crypt device " << dm_name << "\n";
	return false;
	}
	return true;
	}

	bool e4crypt_mount_metadata_encrypted(const std::string& mount_point, bool needs_encrypt, const std::string& key_dir, const std::string& blk_device, std::string* crypto_blkdev) {
	LOG(DEBUG) << "e4crypt_mount_metadata_encrypted: " << mount_point << " " << needs_encrypt << "\n";
	/*auto encrypted_state = android::base::GetProperty("ro.crypto.state", "");
	if (encrypted_state != "") {
	LOG(DEBUG) << "e4crypt_enable_crypto got unexpected starting state: " << encrypted_state;
	return false;
	}
	auto data_rec = fs_mgr_get_entry_for_mount_point(fstab_default, mount_point);
	if (!data_rec) {
	LOG(ERROR) << "Failed to get data_rec";
	return false;
	}*/
	KeyBuffer key;
	if (!read_key(key_dir, needs_encrypt, &key)) return false;
	uint64_t nr_sec;
	if (!get_number_of_sectors(blk_device, &nr_sec)) return false;
	//std::string crypto_blkdev;
	if (!create_crypto_blk_dev(kDmNameUserdata, nr_sec, DEFAULT_KEY_TARGET_TYPE,
	default_key_params(blk_device, key), /&/crypto_blkdev))
	return false;
	// FIXME handle the corrupt case
	/*if (needs_encrypt) {
	LOG(INFO) << "Beginning inplace encryption, nr_sec: " << nr_sec;
	off64_t size_already_done = 0;
	auto rc =
	cryptfs_enable_inplace(const_cast<char*>(crypto_blkdev.c_str()), data_rec->blk_device,
	nr_sec, &size_already_done, nr_sec, 0, false);
	if (rc != 0) {
	LOG(ERROR) << "Inplace crypto failed with code: " << rc;
	return false;
	}
	if (static_cast<uint64_t>(size_already_done) != nr_sec) {
	LOG(ERROR) << "Inplace crypto only got up to sector: " << size_already_done;
	return false;
	}
	LOG(INFO) << "Inplace encryption complete";
	}

	LOG(DEBUG) << "Mounting metadata-encrypted filesystem:" << mount_point;
	mount_via_fs_mgr(data_rec->mount_point, crypto_blkdev.c_str());*/
	LOG(DEBUG) << "crypto block device '" << *crypto_blkdev << "\n";
	return true;
	}