| /* |
| * Copyright (C) 2016 - 2020 The TeamWin Recovery Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "Decrypt.h" |
| #include "FsCrypt.h" |
| |
| #include <map> |
| #include <string> |
| |
| #include <errno.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <sys/stat.h> |
| #include <sys/types.h> |
| |
| #ifndef HAVE_LIBKEYUTILS |
| #include "key_control.h" |
| #else |
| #include <keyutils.h> |
| #endif |
| #include "keystore_client.pb.h" |
| #include "Weaver1.h" |
| #include "cutils/properties.h" |
| |
| #include <openssl/sha.h> |
| #include <openssl/aes.h> |
| #include <openssl/evp.h> |
| #include <openssl/rand.h> |
| |
| #include <dirent.h> |
| #include <stdio.h> |
| #include <stdint.h> |
| #include <string.h> |
| #include <sys/types.h> |
| #include <fstream> |
| #include <future> |
| #include <algorithm> |
| |
| #include <android-base/file.h> |
| #include <base/threading/platform_thread.h> |
| #include <android/hardware/confirmationui/1.0/types.h> |
| #include <android/security/BnConfirmationPromptCallback.h> |
| #include <android/security/keystore/IKeystoreService.h> |
| #include <android/hardware/gatekeeper/1.0/IGatekeeper.h> |
| |
| #include <binder/IServiceManager.h> |
| #include <binder/IPCThreadState.h> |
| #include <hardware/hw_auth_token.h> |
| |
| #include <keystore/keystore.h> |
| #include <keystore/keystore_client.h> |
| #include <keystore/keystore_client_impl.h> |
| #include <keystore/KeystoreResponse.h> |
| #include <keystore/keystore_hidl_support.h> |
| #include <keystore/keystore_promises.h> |
| #include <keystore/keystore_return_types.h> |
| #include <keystore/keymaster_types.h> |
| #include <keymasterV4_1/Keymaster.h> |
| #include <keystore/OperationResult.h> |
| #include "keystore_client.pb.h" |
| |
| #include <keymasterV4_0/authorization_set.h> |
| #include <keymasterV4_0/keymaster_utils.h> |
| |
| extern "C" { |
| #include "crypto_scrypt.h" |
| } |
| |
| #include "fscrypt_policy.h" |
| #include "HashPassword.h" |
| #include "KeyStorage.h" |
| |
| using android::security::keystore::IKeystoreService; |
| using keystore::KeystoreResponsePromise; |
| using keystore::OperationResultPromise; |
| using android::security::keymaster::OperationResult; |
| using android::hardware::keymaster::V4_0::support::blob2hidlVec; |
| |
| // Store main DE raw ref / policy |
| extern std::string de_raw_ref; |
| extern std::map<userid_t, std::string> s_de_key_raw_refs; |
| extern std::map<userid_t, std::string> s_ce_key_raw_refs; |
| |
| inline std::string hidlVec2String(const ::keystore::hidl_vec<uint8_t>& value) { |
| return std::string(reinterpret_cast<const std::string::value_type*>(&value[0]), value.size()); |
| } |
| |
| static bool lookup_ref_key_internal(std::map<userid_t, std::string>& key_map, const uint8_t* policy, userid_t* user_id) { |
| char policy_string_hex[FS_KEY_DESCRIPTOR_SIZE_HEX]; |
| char key_map_hex[FS_KEY_DESCRIPTOR_SIZE_HEX]; |
| policy_to_hex(policy, policy_string_hex); |
| |
| for (std::map<userid_t, std::string>::iterator it=key_map.begin(); it!=key_map.end(); ++it) { |
| policy_to_hex(reinterpret_cast<const uint8_t*>(&it->second[0]), key_map_hex); |
| std::string key_map_hex_string = std::string(key_map_hex); |
| if (key_map_hex_string == policy_string_hex) { |
| *user_id = it->first; |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| extern "C" bool lookup_ref_key(const uint8_t* policy, uint8_t* policy_type) { |
| userid_t user_id = 0; |
| char policy_string_hex[FS_KEY_DESCRIPTOR_SIZE_HEX]; |
| char de_raw_ref_hex[FS_KEY_DESCRIPTOR_SIZE_HEX]; |
| policy_to_hex(policy, policy_string_hex); |
| policy_to_hex(reinterpret_cast<const uint8_t*>(&de_raw_ref[0]), de_raw_ref_hex); |
| std::string de_raw_ref_hex_string = std::string(de_raw_ref_hex); |
| |
| std::string policy_type_string; |
| if (policy_string_hex == de_raw_ref_hex_string) { |
| policy_type_string = "0DK"; |
| memcpy(policy_type, policy_type_string.data(), policy_type_string.size()); |
| return true; |
| } |
| |
| if (!lookup_ref_key_internal(s_de_key_raw_refs, policy, &user_id)) { |
| if (!lookup_ref_key_internal(s_ce_key_raw_refs, policy, &user_id)) { |
| return false; |
| } else |
| policy_type_string = "0CE" + std::to_string(user_id); |
| } else |
| policy_type_string = "0DE" + std::to_string(user_id); |
| memcpy(policy_type, policy_type_string.data(), policy_type_string.size()); |
| return true; |
| } |
| |
| extern "C" bool lookup_ref_tar(const uint8_t* policy_type, uint8_t* policy) { |
| std::string policy_type_string = std::string((char *) policy_type); |
| char policy_hex[FS_KEY_DESCRIPTOR_SIZE_HEX]; |
| policy_to_hex(policy_type, policy_hex); |
| |
| // Current encryption fscrypt policy is v1 (which is stored as version 0e) |
| if (policy_type_string.substr(0,1) != "0") { |
| printf("Unexpected version %c\n", policy_type[0]); |
| return false; |
| } |
| |
| if (policy_type_string.substr(1, 2) == "DK") { |
| memcpy(policy, de_raw_ref.data(), de_raw_ref.size()); |
| return true; |
| } |
| |
| userid_t user_id = atoi(policy_type_string.substr(3, 4).c_str()); |
| std::string raw_ref; |
| |
| if (policy_type_string.substr(1, 1) == "D") { |
| if (lookup_key_ref(s_de_key_raw_refs, user_id, &raw_ref)) { |
| memcpy(policy, raw_ref.data(), raw_ref.size()); |
| } else |
| return false; |
| } else if (policy_type_string.substr(1, 1) == "C") { |
| if (lookup_key_ref(s_ce_key_raw_refs, user_id, &raw_ref)) { |
| memcpy(policy, raw_ref.data(), raw_ref.size()); |
| } else |
| return false; |
| } else { |
| printf("unknown policy type '%s'\n", policy_type); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Decrypt_DE() { |
| if (!fscrypt_initialize_systemwide_keys()) { // this deals with the overarching device encryption |
| printf("fscrypt_initialize_systemwide_keys returned fail\n"); |
| return false; |
| } |
| if (!fscrypt_init_user0()) { |
| printf("fscrypt_init_user0 returned fail\n"); |
| return false; |
| } |
| return true; |
| } |
| |
| // Crappy functions for debugging, please ignore unless you need to debug |
| // void output_hex(const std::string& in) { |
| // const char *buf = in.data(); |
| // char hex[in.size() * 2 + 1]; |
| // unsigned int index; |
| // for (index = 0; index < in.size(); index++) |
| // sprintf(&hex[2 * index], "%02X", buf[index]); |
| // printf("%s", hex); |
| // } |
| |
| // void output_hex(const char* buf, const int size) { |
| // char hex[size * 2 + 1]; |
| // int index; |
| // for (index = 0; index < size; index++) |
| // sprintf(&hex[2 * index], "%02X", buf[index]); |
| // printf("%s", hex); |
| // } |
| |
| // void output_hex(const unsigned char* buf, const int size) { |
| // char hex[size * 2 + 1]; |
| // int index; |
| // for (index = 0; index < size; index++) |
| // sprintf(&hex[2 * index], "%02X", buf[index]); |
| // printf("%s", hex); |
| // } |
| |
| // void output_hex(std::vector<uint8_t>* vec) { |
| // char hex[3]; |
| // unsigned int index; |
| // for (index = 0; index < vec->size(); index++) { |
| // sprintf(&hex[0], "%02X", vec->at(index)); |
| // printf("%s", hex); |
| // } |
| // } |
| |
| /* An alternative is to use: |
| * sqlite3 /data/system/locksettings.db "SELECT value FROM locksettings WHERE name='sp-handle' AND user=0;" |
| * but we really don't want to include the 1.1MB libsqlite in TWRP. We scan the spblob folder for the |
| * password data file (*.pwd) and get the handle from the filename instead. This is a replacement for |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/LockSettingsService.java#2017 |
| * We never use this data as an actual long. We always use it as a string. */ |
| bool Find_Handle(const std::string& spblob_path, std::string& handle_str) { |
| DIR* dir = opendir(spblob_path.c_str()); |
| if (!dir) { |
| printf("Error opening '%s'\n", spblob_path.c_str()); |
| return false; |
| } |
| |
| struct dirent* de = 0; |
| |
| while ((de = readdir(dir)) != 0) { |
| if (strcmp(de->d_name, ".") == 0 || strcmp(de->d_name, "..") == 0) |
| continue; |
| size_t len = strlen(de->d_name); |
| if (len <= 4) |
| continue; |
| char* p = de->d_name; |
| p += len - 4; |
| if (strncmp(p, ".pwd", 4) == 0) { |
| handle_str = de->d_name; |
| handle_str = handle_str.substr(0, len - 4); |
| //*handle = strtoull(handle_str.c_str(), 0 , 16); |
| closedir(dir); |
| return true; |
| } |
| } |
| closedir(dir); |
| return false; |
| } |
| |
| /* This is the structure of the data in the password data (*.pwd) file which the structure can be found |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#187 */ |
| struct password_data_struct { |
| int password_type; |
| unsigned char scryptN; |
| unsigned char scryptR; |
| unsigned char scryptP; |
| int salt_len; |
| void* salt; |
| int handle_len; |
| void* password_handle; |
| }; |
| |
| /* C++ replacement for |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#764 */ |
| bool Get_Password_Data(const std::string& spblob_path, const std::string& handle_str, password_data_struct *pwd) { |
| std::string pwd_file = spblob_path + handle_str + ".pwd"; |
| std::string pwd_data; |
| if (!android::base::ReadFileToString(pwd_file, &pwd_data)) { |
| printf("Failed to read '%s'\n", pwd_file.c_str()); |
| return false; |
| } |
| // output_hex(pwd_data.data(), pwd_data.size());printf("\n"); |
| const int* intptr = (const int*)pwd_data.data(); |
| pwd->password_type = *intptr; |
| endianswap(&pwd->password_type); |
| //printf("password type %i\n", pwd->password_type); // 2 was PIN, 1 for pattern, 2 also for password, -1 for default password |
| const unsigned char* byteptr = (const unsigned char*)pwd_data.data() + sizeof(int); |
| pwd->scryptN = *byteptr; |
| byteptr++; |
| pwd->scryptR = *byteptr; |
| byteptr++; |
| pwd->scryptP = *byteptr; |
| byteptr++; |
| intptr = (const int*)byteptr; |
| pwd->salt_len = *intptr; |
| endianswap(&pwd->salt_len); |
| if (pwd->salt_len != 0) { |
| pwd->salt = malloc(pwd->salt_len); |
| if (!pwd->salt) { |
| printf("Get_Password_Data malloc salt\n"); |
| return false; |
| } |
| memcpy(pwd->salt, intptr + 1, pwd->salt_len); |
| intptr++; |
| byteptr = (const unsigned char*)intptr; |
| byteptr += pwd->salt_len; |
| } else { |
| printf("Get_Password_Data salt_len is 0\n"); |
| return false; |
| } |
| intptr = (const int*)byteptr; |
| pwd->handle_len = *intptr; |
| endianswap(&pwd->handle_len); |
| if (pwd->handle_len != 0) { |
| pwd->password_handle = malloc(pwd->handle_len); |
| if (!pwd->password_handle) { |
| printf("Get_Password_Data malloc password_handle\n"); |
| return false; |
| } |
| memcpy(pwd->password_handle, intptr + 1, pwd->handle_len); |
| } else { |
| printf("Get_Password_Data handle_len is 0\n"); |
| // Not an error if using weaver |
| } |
| return true; |
| } |
| |
| /* C++ replacement for |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#765 |
| * called here |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#1050 */ |
| bool Get_Password_Token(const password_data_struct *pwd, const std::string& Password, unsigned char* password_token) { |
| if (!password_token) { |
| printf("password_token is null\n"); |
| return false; |
| } |
| unsigned int N = 1 << pwd->scryptN; |
| unsigned int r = 1 << pwd->scryptR; |
| unsigned int p = 1 << pwd->scryptP; |
| //printf("N %i r %i p %i\n", N, r, p); |
| int ret = crypto_scrypt(reinterpret_cast<const uint8_t*>(Password.data()), Password.size(), |
| reinterpret_cast<const uint8_t*>(pwd->salt), pwd->salt_len, |
| N, r, p, |
| password_token, 32); |
| if (ret != 0) { |
| printf("scrypt error\n"); |
| return false; |
| } |
| return true; |
| } |
| |
| // Data structure for the *.weaver file, see Get_Weaver_Data below |
| struct weaver_data_struct { |
| unsigned char version; |
| int slot; |
| }; |
| |
| /* C++ replacement for |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#501 |
| * called here |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#768 */ |
| bool Get_Weaver_Data(const std::string& spblob_path, const std::string& handle_str, weaver_data_struct *wd) { |
| std::string weaver_file = spblob_path + handle_str + ".weaver"; |
| std::string weaver_data; |
| if (!android::base::ReadFileToString(weaver_file, &weaver_data)) { |
| printf("Failed to read '%s'\n", weaver_file.c_str()); |
| return false; |
| } |
| // output_hex(weaver_data.data(), weaver_data.size());printf("\n"); |
| const unsigned char* byteptr = (const unsigned char*)weaver_data.data(); |
| wd->version = *byteptr; |
| // printf("weaver version %i\n", wd->version); |
| const int* intptr = (const int*)weaver_data.data() + sizeof(unsigned char); |
| wd->slot = *intptr; |
| //endianswap(&wd->slot); not needed |
| // printf("weaver slot %i\n", wd->slot); |
| return true; |
| } |
| |
| namespace android { |
| |
| // On Android 8.0 for some reason init can't seem to completely stop keystore |
| // so we have to kill it too if it doesn't die on its own. |
| static void kill_keystore() { |
| DIR* dir = opendir("/proc"); |
| if (dir) { |
| struct dirent* de = 0; |
| |
| while ((de = readdir(dir)) != 0) { |
| if (strcmp(de->d_name, ".") == 0 || strcmp(de->d_name, "..") == 0) |
| continue; |
| |
| int pid = -1; |
| int ret = sscanf(de->d_name, "%d", &pid); |
| |
| if (ret == 1) { |
| char cmdpath[PATH_MAX]; |
| sprintf(cmdpath, "/proc/%d/cmdline", pid); |
| |
| FILE* file = fopen(cmdpath, "r"); |
| size_t task_size = PATH_MAX; |
| char task[PATH_MAX]; |
| char* p = task; |
| if (getline(&p, &task_size, file) > 0) { |
| if (strstr(task, "keystore") != 0) { |
| printf("keystore pid %d found, sending kill.\n", pid); |
| kill(pid, SIGINT); |
| usleep(5000); |
| kill(pid, SIGKILL); |
| } |
| } |
| fclose(file); |
| } |
| } |
| closedir(dir); |
| } |
| } |
| |
| // The keystore holds a file open on /data so we have to stop / kill it |
| // if we want to be able to unmount /data for things like formatting. |
| static void stop_keystore() { |
| printf("Stopping keystore...\n"); |
| property_set("ctl.stop", "keystore"); |
| usleep(5000); |
| kill_keystore(); |
| } |
| |
| /* These next 2 functions try to get the keystore service 50 times because |
| * the keystore is not always ready when TWRP boots */ |
| android::sp<IBinder> getKeystoreBinder() { |
| android::sp<IServiceManager> sm = android::defaultServiceManager(); |
| return sm->getService(String16("android.security.keystore")); |
| } |
| |
| android::sp<IBinder> getKeystoreBinderRetry() { |
| printf("Starting keystore...\n"); |
| property_set("ctl.start", "keystore"); |
| int retry_count = 50; |
| android::sp<IBinder> binder = getKeystoreBinder(); |
| while (binder == NULL && retry_count) { |
| printf("Waiting for keystore service... %i\n", retry_count--); |
| sleep(1); |
| binder = getKeystoreBinder(); |
| } |
| return binder; |
| } |
| |
| namespace keystore { |
| |
| #define SYNTHETIC_PASSWORD_VERSION_V1 1 |
| #define SYNTHETIC_PASSWORD_VERSION_V2 2 |
| #define SYNTHETIC_PASSWORD_VERSION_V3 3 |
| #define SYNTHETIC_PASSWORD_PASSWORD_BASED 0 |
| #define SYNTHETIC_PASSWORD_KEY_PREFIX "USRSKEY_synthetic_password_" |
| #define USR_PRIVATE_KEY_PREFIX "USRPKEY_synthetic_password_" |
| |
| static std::string mKey_Prefix; |
| |
| /* The keystore alias subid is sometimes the same as the handle, but not always. |
| * In the case of handle 0c5303fd2010fe29, the alias subid used c5303fd2010fe29 |
| * without the leading 0. We could try to parse the data from a previous |
| * keystore request, but I think this is an easier solution because there |
| * is little to no documentation on the format of data we get back from |
| * the keystore in this instance. We also want to copy everything to a temp |
| * folder so that any key upgrades that might take place do not actually |
| * upgrade the keys on the data partition. We rename all 1000 uid files to 0 |
| * to pass the keystore permission checks. */ |
| bool Find_Keystore_Alias_SubID_And_Prep_Files(const userid_t user_id, std::string& keystoreid, const std::string& handle_str) { |
| char path_c[PATH_MAX]; |
| sprintf(path_c, "/data/misc/keystore/user_%d", user_id); |
| char user_dir[PATH_MAX]; |
| sprintf(user_dir, "user_%d", user_id); |
| std::string source_path = "/data/misc/keystore/"; |
| source_path += user_dir; |
| std::string handle_sub = handle_str; |
| while (handle_sub.substr(0,1) == "0") { |
| std::string temp = handle_sub.substr(1); |
| handle_sub = temp; |
| } |
| mKey_Prefix = ""; |
| |
| mkdir("/tmp/misc", 0755); |
| mkdir("/tmp/misc/keystore", 0755); |
| std::string destination_path = "/tmp/misc/keystore/"; |
| destination_path += user_dir; |
| if (mkdir(destination_path.c_str(), 0755) && errno != EEXIST) { |
| printf("failed to mkdir '%s' %s\n", destination_path.c_str(), strerror(errno)); |
| return false; |
| } |
| destination_path += "/"; |
| |
| DIR* dir = opendir(source_path.c_str()); |
| if (!dir) { |
| printf("Error opening '%s'\n", source_path.c_str()); |
| return false; |
| } |
| source_path += "/"; |
| |
| struct dirent* de = 0; |
| size_t prefix_len = strlen(SYNTHETIC_PASSWORD_KEY_PREFIX); |
| bool found_subid = false; |
| bool has_pkey = false; // PKEY has priority over SKEY |
| |
| while ((de = readdir(dir)) != 0) { |
| if (strcmp(de->d_name, ".") == 0 || strcmp(de->d_name, "..") == 0) |
| continue; |
| if (!found_subid) { |
| size_t len = strlen(de->d_name); |
| if (len <= prefix_len) |
| continue; |
| if (strstr(de->d_name, SYNTHETIC_PASSWORD_KEY_PREFIX) && !has_pkey) |
| mKey_Prefix = SYNTHETIC_PASSWORD_KEY_PREFIX; |
| else if (strstr(de->d_name, USR_PRIVATE_KEY_PREFIX)) { |
| mKey_Prefix = USR_PRIVATE_KEY_PREFIX; |
| has_pkey = true; |
| } else |
| continue; |
| if (strstr(de->d_name, handle_sub.c_str())) { |
| keystoreid = handle_sub; |
| printf("keystoreid matched handle_sub: '%s'\n", keystoreid.c_str()); |
| found_subid = true; |
| } else { |
| std::string file = de->d_name; |
| std::size_t found = file.find_last_of("_"); |
| if (found != std::string::npos) { |
| keystoreid = file.substr(found + 1); |
| // printf("possible keystoreid: '%s'\n", keystoreid.c_str()); |
| //found_subid = true; // we'll keep going in hopes that we find a pkey or a match to the handle_sub |
| } |
| } |
| } |
| std::string src = source_path; |
| src += de->d_name; |
| std::ifstream srcif(src.c_str(), std::ios::binary); |
| std::string dst = destination_path; |
| dst += de->d_name; |
| std::size_t source_uid = dst.find("1000"); |
| if (source_uid != std::string::npos) |
| dst.replace(source_uid, 4, "0"); |
| std::ofstream dstof(dst.c_str(), std::ios::binary); |
| printf("copying '%s' to '%s'\n", src.c_str(), dst.c_str()); |
| dstof << srcif.rdbuf(); |
| srcif.close(); |
| dstof.close(); |
| } |
| closedir(dir); |
| if (!found_subid && !mKey_Prefix.empty() && !keystoreid.empty()) |
| found_subid = true; |
| return found_subid; |
| } |
| |
| /* C++ replacement for function of the same name |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#867 |
| * returning an empty string indicates an error */ |
| std::string unwrapSyntheticPasswordBlob(const std::string& spblob_path, const std::string& handle_str, const userid_t user_id, |
| const void* application_id, const size_t application_id_size, uint32_t auth_token_len) { |
| std::string disk_decryption_secret_key = ""; |
| |
| android::ProcessState::self()->startThreadPool(); |
| |
| std::string keystore_alias_subid; |
| // Can be stored in user 0, so check for both. |
| if (!Find_Keystore_Alias_SubID_And_Prep_Files(user_id, keystore_alias_subid, handle_str) && |
| !Find_Keystore_Alias_SubID_And_Prep_Files(0, keystore_alias_subid, handle_str)) |
| { |
| printf("failed to scan keystore alias subid and prep keystore files\n"); |
| return disk_decryption_secret_key; |
| } |
| |
| // First get the keystore service |
| android::sp<IBinder> binder = getKeystoreBinderRetry(); |
| android::sp<IKeystoreService> service = interface_cast<IKeystoreService>(binder); |
| |
| if (service == NULL) { |
| printf("error: could not connect to keystore service\n"); |
| return disk_decryption_secret_key; |
| } |
| |
| if (auth_token_len > 0) { |
| printf("Starting keystore_auth service...\n"); |
| property_set("ctl.start", "keystore_auth"); |
| } |
| |
| // Read the data from the .spblob file per: https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#869 |
| std::string spblob_file = spblob_path + handle_str + ".spblob"; |
| std::string spblob_data; |
| if (!android::base::ReadFileToString(spblob_file, &spblob_data)) { |
| printf("Failed to read '%s'\n", spblob_file.c_str()); |
| return disk_decryption_secret_key; |
| } |
| unsigned char* byteptr = (unsigned char*)spblob_data.data(); |
| if (*byteptr != SYNTHETIC_PASSWORD_VERSION_V2 && *byteptr != SYNTHETIC_PASSWORD_VERSION_V1 |
| && *byteptr != SYNTHETIC_PASSWORD_VERSION_V3) { |
| printf("Unsupported synthetic password version %i\n", *byteptr); |
| return disk_decryption_secret_key; |
| } |
| const unsigned char* synthetic_password_version = byteptr; |
| byteptr++; |
| if (*byteptr != SYNTHETIC_PASSWORD_PASSWORD_BASED) { |
| printf("spblob data is not SYNTHETIC_PASSWORD_PASSWORD_BASED\n"); |
| return disk_decryption_secret_key; |
| } |
| byteptr++; // Now we're pointing to the blob data itself |
| if (*synthetic_password_version == SYNTHETIC_PASSWORD_VERSION_V2 |
| || *synthetic_password_version == SYNTHETIC_PASSWORD_VERSION_V3) { |
| printf("spblob v2 / v3\n"); |
| /* Version 2 / 3 of the spblob is basically the same as version 1, but the order of getting the intermediate key and disk decryption key have been flip-flopped |
| * as seen in https://android.googlesource.com/platform/frameworks/base/+/5025791ac6d1538224e19189397de8d71dcb1a12 |
| */ |
| /* First decrypt call found in |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.1.0_r18/services/core/java/com/android/server/locksettings/SyntheticPasswordCrypto.java#135 |
| * We will use https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/keystore/java/android/security/keystore/AndroidKeyStoreCipherSpiBase.java |
| * and https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/keystore/java/android/security/keystore/AndroidKeyStoreAuthenticatedAESCipherSpi.java |
| * First we set some algorithm parameters as seen in two places: |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/keystore/java/android/security/keystore/AndroidKeyStoreAuthenticatedAESCipherSpi.java#297 |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/keystore/java/android/security/keystore/AndroidKeyStoreAuthenticatedAESCipherSpi.java#216 */ |
| // When using secdis (aka not weaver) you must supply an auth token to the keystore prior to the begin operation |
| if (auth_token_len > 0) { |
| /*::keystore::KeyStoreServiceReturnCode auth_result = service->addAuthToken(auth_token, auth_token_len); |
| if (!auth_result.isOk()) { |
| // The keystore checks the uid of the calling process and will return a permission denied on this operation for user 0 |
| printf("keystore error adding auth token\n"); |
| return disk_decryption_secret_key; |
| }*/ |
| // The keystore refuses to allow the root user to supply auth tokens, so we write the auth token to a file earlier and |
| // run a separate service that runs user the system user to add the auth token. We wait for the auth token file to be |
| // deleted by the keymaster_auth service and check for a /auth_error file in case of errors. We quit after after a while if |
| // the /auth_token file never gets deleted. |
| int auth_wait_count = 20; |
| while (access("/auth_token", F_OK) == 0 && auth_wait_count-- > 0) |
| usleep(5000); |
| if (auth_wait_count == 0 || access("/auth_error", F_OK) == 0) { |
| printf("error during keymaster_auth service\n"); |
| /* If you are getting this error, make sure that you have the keymaster_auth service defined in your init scripts, preferrably in init.recovery.{ro.hardware}.rc |
| * service keystore_auth /system/bin/keystore_auth |
| * disabled |
| * oneshot |
| * user system |
| * group root |
| * seclabel u:r:recovery:s0 |
| * |
| * And check dmesg for error codes regarding this service if needed. */ |
| return disk_decryption_secret_key; |
| } |
| } |
| int32_t ret; |
| size_t maclen = 128; |
| unsigned char* iv = (unsigned char*)byteptr; // The IV is the first 12 bytes of the spblob |
| ::keystore::hidl_vec<uint8_t> iv_hidlvec; |
| iv_hidlvec.setToExternal((unsigned char*)byteptr, 12); |
| // printf("iv: "); output_hex((const unsigned char*)iv, 12); printf("\n"); |
| std::string keystore_alias = mKey_Prefix; |
| keystore_alias += keystore_alias_subid; |
| String16 keystore_alias16(keystore_alias.data(), keystore_alias.size()); |
| int32_t error_code; |
| unsigned char* cipher_text = (unsigned char*)byteptr + 12; // The cipher text comes immediately after the IV |
| std::string cipher_text_str(byteptr, byteptr + spblob_data.size() - 14); |
| |
| ::keystore::hidl_vec<uint8_t> cipher_text_hidlvec; |
| ::keystore::AuthorizationSetBuilder begin_params; |
| |
| cipher_text_hidlvec.setToExternal(cipher_text, spblob_data.size() - 14 /* 1 each for version and SYNTHETIC_PASSWORD_PASSWORD_BASED and 12 for the iv */); |
| begin_params.Authorization(::keystore::TAG_ALGORITHM, ::keystore::Algorithm::AES); |
| begin_params.Authorization(::keystore::TAG_BLOCK_MODE, ::keystore::BlockMode::GCM); |
| begin_params.Padding(::keystore::PaddingMode::NONE); |
| begin_params.Authorization(::keystore::TAG_NONCE, iv_hidlvec); |
| begin_params.Authorization(::keystore::TAG_MAC_LENGTH, maclen); |
| |
| ::keystore::hidl_vec<uint8_t> entropy; // No entropy is needed for decrypt |
| entropy.resize(0); |
| android::security::keymaster::KeymasterArguments empty_params; |
| android::hardware::keymaster::V4_0::KeyPurpose decryptPurpose = android::hardware::keymaster::V4_0::KeyPurpose::DECRYPT; |
| android::sp<android::IBinder> decryptAuthToken(new android::BBinder); |
| |
| android::sp<OperationResultPromise> promise = new OperationResultPromise; |
| auto future = promise->get_future(); |
| auto binder_result = service->begin(promise, decryptAuthToken, keystore_alias16, (int32_t)decryptPurpose, true, |
| android::security::keymaster::KeymasterArguments(begin_params.hidl_data()), |
| entropy, -1, &error_code); |
| if (!binder_result.isOk()) { |
| printf("communication error while calling keystore\n"); |
| return disk_decryption_secret_key; |
| } |
| ::keystore::KeyStoreNativeReturnCode rc(error_code); |
| if (!rc.isOk()) { |
| printf("Keystore begin returned: %u\n", error_code); |
| return disk_decryption_secret_key; |
| } |
| OperationResult result = future.get(); |
| auto handle = std::move(result.token); |
| |
| // The cipher.doFinal call triggers an update to the keystore followed by a finish https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordCrypto.java#64 |
| // See also https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/keystore/java/android/security/keystore/KeyStoreCryptoOperationChunkedStreamer.java#208 |
| future = {}; |
| promise = new OperationResultPromise(); |
| future = promise->get_future(); |
| binder_result = service->update(promise, handle, empty_params, cipher_text_hidlvec, &error_code); |
| rc = ::keystore::KeyStoreNativeReturnCode(error_code); |
| if (!rc.isOk()) { |
| printf("Keystore update returned: %d\n", error_code); |
| return disk_decryption_secret_key; |
| } |
| result = future.get(); |
| if (!result.resultCode.isOk()) { |
| printf("update failed: %d\n", error_code); |
| return disk_decryption_secret_key; |
| } |
| |
| size_t keystore_result_size = result.data.size(); |
| unsigned char* keystore_result = (unsigned char*)malloc(keystore_result_size); |
| if (!keystore_result) { |
| printf("malloc on keystore_result\n"); |
| return disk_decryption_secret_key; |
| } |
| memcpy(keystore_result, &result.data[0], result.data.size()); |
| future = {}; |
| promise = new OperationResultPromise(); |
| future = promise->get_future(); |
| std::tie(rc, keyBlob, charBlob, lockedEntry) = mKeyStore->getKeyForName(name8, callingUid, TYPE_KEYMASTER_10); |
| |
| auto hidlInput = blob2hidlVec(input_data); |
| ::keystore::hidl_vec<uint8_t> signature; |
| binder_result = service->finish(promise, handle, empty_params, hidlInput, signature, entropy, &error_code); |
| if (!binder_result.isOk()) { |
| printf("communication error while calling keystore\n"); |
| free(keystore_result); |
| return disk_decryption_secret_key; |
| } |
| rc = ::keystore::KeyStoreNativeReturnCode(error_code); |
| if (!rc.isOk()) { |
| printf("Keystore finish returned: %d\n", error_code); |
| return disk_decryption_secret_key; |
| } |
| result = future.get(); |
| if (!result.resultCode.isOk()) { |
| printf("finish failed: %d\n", error_code); |
| return disk_decryption_secret_key; |
| } |
| stop_keystore(); |
| /* Now we do the second decrypt call as seen in: |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.1.0_r18/services/core/java/com/android/server/locksettings/SyntheticPasswordCrypto.java#136 |
| */ |
| const unsigned char* intermediate_iv = keystore_result; |
| // printf("intermediate_iv: "); output_hex((const unsigned char*)intermediate_iv, 12); printf("\n"); |
| const unsigned char* intermediate_cipher_text = (const unsigned char*)keystore_result + 12; // The cipher text comes immediately after the IV |
| int cipher_size = keystore_result_size - 12; |
| // First we personalize as seen https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordCrypto.java#102 |
| void* personalized_application_id = PersonalizedHashBinary(PERSONALISATION_APPLICATION_ID, (const char*)application_id, application_id_size); |
| if (!personalized_application_id) { |
| return disk_decryption_secret_key; |
| } |
| // printf("personalized application id: "); output_hex((unsigned char*)personalized_application_id, SHA512_DIGEST_LENGTH); printf("\n"); |
| // Now we'll decrypt using openssl AES/GCM/NoPadding |
| OpenSSL_add_all_ciphers(); |
| int actual_size=0, final_size=0; |
| EVP_CIPHER_CTX *d_ctx = EVP_CIPHER_CTX_new(); |
| const unsigned char* key = (const unsigned char*)personalized_application_id; // The key is the now personalized copy of the application ID |
| // printf("key: "); output_hex((const unsigned char*)key, 32); printf("\n"); |
| EVP_DecryptInit(d_ctx, EVP_aes_256_gcm(), key, intermediate_iv); |
| unsigned char* secret_key = (unsigned char*)malloc(cipher_size); |
| if (!secret_key) { |
| printf("malloc failure on secret key\n"); |
| return disk_decryption_secret_key; |
| } |
| EVP_DecryptUpdate(d_ctx, secret_key, &actual_size, intermediate_cipher_text, cipher_size); |
| unsigned char tag[AES_BLOCK_SIZE]; |
| EVP_CIPHER_CTX_ctrl(d_ctx, EVP_CTRL_GCM_SET_TAG, 16, tag); |
| EVP_DecryptFinal_ex(d_ctx, secret_key + actual_size, &final_size); |
| EVP_CIPHER_CTX_free(d_ctx); |
| free(personalized_application_id); |
| free(keystore_result); |
| int secret_key_real_size = actual_size - 16; |
| // printf("secret key: "); output_hex((const unsigned char*)secret_key, secret_key_real_size); printf("\n"); |
| // The payload data from the keystore update is further personalized at https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#153 |
| // We now have the disk decryption key! |
| if (*synthetic_password_version == SYNTHETIC_PASSWORD_VERSION_V3) { |
| // V3 uses SP800 instead of SHA512 |
| disk_decryption_secret_key = PersonalizedHashSP800(PERSONALIZATION_FBE_KEY, PERSONALISATION_CONTEXT, (const char*)secret_key, secret_key_real_size); |
| } else { |
| disk_decryption_secret_key = PersonalizedHash(PERSONALIZATION_FBE_KEY, (const char*)secret_key, secret_key_real_size); |
| } |
| // printf("disk_decryption_secret_key: '%s'\n", disk_decryption_secret_key.c_str()); |
| free(secret_key); |
| return disk_decryption_secret_key; |
| } |
| return disk_decryption_secret_key; |
| } |
| |
| }} |
| |
| #define PASSWORD_TOKEN_SIZE 32 |
| |
| /* C++ replacement for |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#992 |
| * called here |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#813 */ |
| bool Get_Secdis(const std::string& spblob_path, const std::string& handle_str, std::string& secdis_data) { |
| std::string secdis_file = spblob_path + handle_str + ".secdis"; |
| if (!android::base::ReadFileToString(secdis_file, &secdis_data)) { |
| printf("Failed to read '%s'\n", secdis_file.c_str()); |
| return false; |
| } |
| // output_hex(secdis_data.data(), secdis_data.size());printf("\n"); |
| return true; |
| } |
| |
| // C++ replacement for https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#1033 |
| userid_t fakeUid(const userid_t uid) { |
| return 100000 + uid; |
| } |
| |
| bool Is_Weaver(const std::string& spblob_path, const std::string& handle_str) { |
| std::string weaver_file = spblob_path + handle_str + ".weaver"; |
| struct stat st; |
| if (stat(weaver_file.c_str(), &st) == 0) |
| return true; |
| return false; |
| } |
| |
| bool Free_Return(bool retval, void* weaver_key, password_data_struct* pwd) { |
| if (weaver_key) |
| free(weaver_key); |
| if (pwd->salt) |
| free(pwd->salt); |
| if (pwd->password_handle) |
| free(pwd->password_handle); |
| return retval; |
| } |
| |
| /* Decrypt_User_Synth_Pass is the TWRP C++ equivalent to spBasedDoVerifyCredential |
| * https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/LockSettingsService.java#1998 */ |
| bool Decrypt_User_Synth_Pass(const userid_t user_id, const std::string& Password) { |
| bool retval = false; |
| void* weaver_key = NULL; |
| password_data_struct pwd; |
| pwd.salt = NULL; |
| pwd.salt_len = 0; |
| pwd.password_handle = NULL; |
| pwd.handle_len = 0; |
| char application_id[PASSWORD_TOKEN_SIZE + SHA512_DIGEST_LENGTH]; |
| |
| uint32_t auth_token_len = 0; |
| |
| std::string secret; // this will be the disk decryption key that is sent to vold |
| std::string token = "!"; // there is no token used for this kind of decrypt, key escrow is handled by weaver |
| int flags = FLAG_STORAGE_DE; |
| if (user_id == 0) |
| flags = FLAG_STORAGE_DE; |
| else |
| flags = FLAG_STORAGE_CE; |
| char spblob_path_char[PATH_MAX]; |
| sprintf(spblob_path_char, "/data/system_de/%d/spblob/", user_id); |
| std::string spblob_path = spblob_path_char; |
| long handle = 0; |
| std::string handle_str; |
| // Get the handle: https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/LockSettingsService.java#2017 |
| if (!Find_Handle(spblob_path, handle_str)) { |
| printf("Error getting handle\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| // printf("Handle is '%s'\n", handle_str.c_str()); |
| // Now we begin driving unwrapPasswordBasedSyntheticPassword from: https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#758 |
| // First we read the password data which contains scrypt parameters |
| if (!Get_Password_Data(spblob_path, handle_str, &pwd)) { |
| printf("Failed to Get_Password_Data\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| // printf("pwd N %i R %i P %i salt ", pwd.scryptN, pwd.scryptR, pwd.scryptP); output_hex((char*)pwd.salt, pwd.salt_len); printf("\n"); |
| unsigned char password_token[PASSWORD_TOKEN_SIZE]; |
| // printf("Password: '%s'\n", Password.c_str()); |
| // The password token is the password scrypted with the parameters from the password data file |
| if (!Get_Password_Token(&pwd, Password, &password_token[0])) { |
| printf("Failed to Get_Password_Token\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| // output_hex(&password_token[0], PASSWORD_TOKEN_SIZE);printf("\n"); |
| if (Is_Weaver(spblob_path, handle_str)) { |
| printf("using weaver\n"); |
| // BEGIN PIXEL 2 WEAVER |
| // Get the weaver data from the .weaver file which tells us which slot to use when we ask weaver for the escrowed key |
| // https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#768 |
| weaver_data_struct wd; |
| if (!Get_Weaver_Data(spblob_path, handle_str, &wd)) { |
| printf("Failed to get weaver data\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| // The weaver key is the the password token prefixed with "weaver-key" padded to 128 with nulls with the password token appended then SHA512 |
| // https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#1059 |
| weaver_key = PersonalizedHashBinary(PERSONALISATION_WEAVER_KEY, (char*)&password_token[0], PASSWORD_TOKEN_SIZE); |
| if (!weaver_key) { |
| printf("malloc error getting weaver_key\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| // Now we start driving weaverVerify: https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#343 |
| // Called from https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#776 |
| android::vold::Weaver weaver; |
| if (!weaver) { |
| printf("Failed to get weaver service\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| // Get the key size from weaver service |
| uint32_t weaver_key_size = 0; |
| if (!weaver.GetKeySize(&weaver_key_size)) { |
| printf("Failed to get weaver key size\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } else { |
| printf("weaver key size is %u\n", weaver_key_size); |
| } |
| // printf("weaver key: "); output_hex((unsigned char*)weaver_key, weaver_key_size); printf("\n"); |
| // Send the slot from the .weaver file, the computed weaver key, and get the escrowed key data |
| std::vector<uint8_t> weaver_payload; |
| // TODO: we should return more information about the status including time delays before the next retry |
| if (!weaver.WeaverVerify(wd.slot, weaver_key, &weaver_payload)) { |
| printf("failed to weaver verify\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| // printf("weaver payload: "); output_hex(&weaver_payload); printf("\n"); |
| // Done with weaverVerify |
| // Now we will compute the application ID |
| // https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#964 |
| // Called from https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#780 |
| // The escrowed weaver key data is prefixed with "weaver-pwd" padded to 128 with nulls with the weaver payload appended then SHA512 |
| void* weaver_secret = PersonalizedHashBinary(PERSONALISATION_WEAVER_PASSWORD, (const char*)weaver_payload.data(), weaver_payload.size()); |
| // printf("weaver secret: "); output_hex((unsigned char*)weaver_secret, SHA512_DIGEST_LENGTH); printf("\n"); |
| // The application ID is the password token and weaver secret appended to each other |
| memcpy((void*)&application_id[0], (void*)&password_token[0], PASSWORD_TOKEN_SIZE); |
| memcpy((void*)&application_id[PASSWORD_TOKEN_SIZE], weaver_secret, SHA512_DIGEST_LENGTH); |
| // printf("application ID: "); output_hex((unsigned char*)application_id, PASSWORD_TOKEN_SIZE + SHA512_DIGEST_LENGTH); printf("\n"); |
| // END PIXEL 2 WEAVER |
| } else { |
| printf("using secdis\n"); |
| std::string secdis_data; |
| if (!Get_Secdis(spblob_path, handle_str, secdis_data)) { |
| printf("Failed to get secdis data\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| void* secdiscardable = PersonalizedHashBinary(PERSONALISATION_SECDISCARDABLE, (char*)secdis_data.data(), secdis_data.size()); |
| if (!secdiscardable) { |
| printf("malloc error getting secdiscardable\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| memcpy((void*)&application_id[0], (void*)&password_token[0], PASSWORD_TOKEN_SIZE); |
| memcpy((void*)&application_id[PASSWORD_TOKEN_SIZE], secdiscardable, SHA512_DIGEST_LENGTH); |
| |
| int ret = -1; |
| bool request_reenroll = false; |
| android::sp<android::hardware::gatekeeper::V1_0::IGatekeeper> gk_device; |
| gk_device = ::android::hardware::gatekeeper::V1_0::IGatekeeper::getService(); |
| if (gk_device == nullptr) { |
| printf("failed to get gatekeeper service\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| if (pwd.handle_len <= 0) { |
| printf("no password handle supplied\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| android::hardware::hidl_vec<uint8_t> pwd_handle_hidl; |
| pwd_handle_hidl.setToExternal(const_cast<uint8_t *>((const uint8_t *)pwd.password_handle), pwd.handle_len); |
| void* gk_pwd_token = PersonalizedHashBinary(PERSONALIZATION_USER_GK_AUTH, (char*)&password_token[0], PASSWORD_TOKEN_SIZE); |
| if (!gk_pwd_token) { |
| printf("malloc error getting gatekeeper_key\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| android::hardware::hidl_vec<uint8_t> gk_pwd_token_hidl; |
| gk_pwd_token_hidl.setToExternal(const_cast<uint8_t *>((const uint8_t *)gk_pwd_token), SHA512_DIGEST_LENGTH); |
| android::hardware::Return<void> hwRet = |
| gk_device->verify(fakeUid(user_id), 0 /* challange */, |
| pwd_handle_hidl, |
| gk_pwd_token_hidl, |
| [&ret, &request_reenroll, &auth_token_len] |
| (const android::hardware::gatekeeper::V1_0::GatekeeperResponse &rsp) { |
| ret = static_cast<int>(rsp.code); // propagate errors |
| if (rsp.code >= android::hardware::gatekeeper::V1_0::GatekeeperStatusCode::STATUS_OK) { |
| auth_token_len = rsp.data.size(); |
| request_reenroll = (rsp.code == android::hardware::gatekeeper::V1_0::GatekeeperStatusCode::STATUS_REENROLL); |
| ret = 0; // all success states are reported as 0 |
| // The keystore refuses to allow the root user to supply auth tokens, so we write the auth token to a file here and later |
| // run a separate service that runs as the system user to add the auth token. We wait for the auth token file to be |
| // deleted by the keymaster_auth service and check for a /auth_error file in case of errors. We quit after a while seconds if |
| // the /auth_token file never gets deleted. |
| unlink("/auth_token"); |
| FILE* auth_file = fopen("/auth_token","wb"); |
| if (auth_file != NULL) { |
| fwrite(rsp.data.data(), sizeof(uint8_t), rsp.data.size(), auth_file); |
| fclose(auth_file); |
| } else { |
| printf("failed to open /auth_token for writing\n"); |
| ret = -2; |
| } |
| } else if (rsp.code == android::hardware::gatekeeper::V1_0::GatekeeperStatusCode::ERROR_RETRY_TIMEOUT && rsp.timeout > 0) { |
| ret = rsp.timeout; |
| } |
| } |
| ); |
| free(gk_pwd_token); |
| if (!hwRet.isOk() || ret != 0) { |
| printf("gatekeeper verification failed\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| } |
| // Now we will handle https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#816 |
| // Plus we will include the last bit that computes the disk decrypt key found in: |
| // https://android.googlesource.com/platform/frameworks/base/+/android-8.0.0_r23/services/core/java/com/android/server/locksettings/SyntheticPasswordManager.java#153 |
| secret = android::keystore::unwrapSyntheticPasswordBlob(spblob_path, handle_str, user_id, (const void*)&application_id[0], |
| PASSWORD_TOKEN_SIZE + SHA512_DIGEST_LENGTH, auth_token_len); |
| if (!secret.size()) { |
| printf("failed to unwrapSyntheticPasswordBlob\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| |
| if (!fscrypt_unlock_user_key(user_id, 0, token.c_str(), secret.c_str())) { |
| printf("fscrypt_unlock_user_key returned fail\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| |
| if (!fscrypt_prepare_user_storage("", user_id, 0, flags)) { |
| printf("failed to fscrypt_prepare_user_storage\n"); |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| printf("User %i Decrypted Successfully!\n", user_id); |
| retval = true; |
| return Free_Return(retval, weaver_key, &pwd); |
| } |
| |
| int Get_Password_Type(const userid_t user_id, std::string& filename) { |
| struct stat st; |
| char spblob_path_char[PATH_MAX]; |
| sprintf(spblob_path_char, "/data/system_de/%d/spblob/", user_id); |
| if (stat(spblob_path_char, &st) == 0) { |
| printf("Using synthetic password method\n"); |
| std::string spblob_path = spblob_path_char; |
| std::string handle_str; |
| if (!Find_Handle(spblob_path, handle_str)) { |
| printf("Error getting handle\n"); |
| return 0; |
| } |
| printf("Handle is '%s'\n", handle_str.c_str()); |
| password_data_struct pwd; |
| if (!Get_Password_Data(spblob_path, handle_str, &pwd)) { |
| printf("Failed to Get_Password_Data\n"); |
| return 0; |
| } |
| if (pwd.password_type == 1) { // In Android this means pattern |
| printf("password type: pattern\n"); |
| return 2; // In TWRP this means pattern |
| } |
| // In Android <11 type 2 is PIN or password |
| // In Android 11 type 3 is PIN and type 4 is password |
| else if (pwd.password_type > 1) { |
| printf("password type: pin\n"); |
| return 1; // In TWRP this means PIN or password |
| } |
| printf("using default password\n"); |
| return 0; // We'll try the default password |
| } |
| std::string path; |
| if (user_id == 0) { |
| path = "/data/system/"; |
| } else { |
| char user_id_str[5]; |
| sprintf(user_id_str, "%i", user_id); |
| path = "/data/system/users/"; |
| path += user_id_str; |
| path += "/"; |
| } |
| filename = path + "gatekeeper.password.key"; |
| if (stat(filename.c_str(), &st) == 0 && st.st_size > 0) |
| return 1; |
| filename = path + "gatekeeper.pattern.key"; |
| if (stat(filename.c_str(), &st) == 0 && st.st_size > 0) |
| return 2; |
| printf("Unable to locate gatekeeper password file '%s'\n", filename.c_str()); |
| filename = ""; |
| return 0; |
| } |
| |
| bool Decrypt_User(const userid_t user_id, const std::string& Password) { |
| uint8_t *auth_token; |
| uint32_t auth_token_len; |
| int ret; |
| |
| struct stat st; |
| if (user_id > 9999) { |
| printf("user_id is too big\n"); |
| return false; |
| } |
| std::string filename; |
| bool Default_Password = (Password == "!"); |
| if (Get_Password_Type(user_id, filename) == 0 && !Default_Password) { |
| printf("Unknown password type\n"); |
| return false; |
| } |
| int flags = FLAG_STORAGE_DE; |
| if (user_id == 0) |
| flags = FLAG_STORAGE_DE; |
| else |
| flags = FLAG_STORAGE_CE; |
| |
| if (Default_Password) { |
| if (!fscrypt_unlock_user_key(user_id, 0, "!", "!")) { |
| printf("unlock_user_key returned fail\n"); |
| return false; |
| } |
| if (!fscrypt_prepare_user_storage("", user_id, 0, flags)) { |
| printf("failed to fscrypt_prepare_user_storage\n"); |
| return false; |
| } |
| printf("User %i Decrypted Successfully!\n", user_id); |
| return true; |
| } |
| if (stat("/data/system_de/0/spblob", &st) == 0) { |
| printf("Using synthetic password method\n"); |
| return Decrypt_User_Synth_Pass(user_id, Password); |
| } |
| // printf("password filename is '%s'\n", filename.c_str()); |
| if (stat(filename.c_str(), &st) != 0) { |
| printf("error stat'ing key file: %s\n", strerror(errno)); |
| return false; |
| } |
| std::string handle; |
| if (!android::base::ReadFileToString(filename, &handle)) { |
| printf("Failed to read '%s'\n", filename.c_str()); |
| return false; |
| } |
| bool should_reenroll; |
| bool request_reenroll = false; |
| android::sp<android::hardware::gatekeeper::V1_0::IGatekeeper> gk_device; |
| gk_device = ::android::hardware::gatekeeper::V1_0::IGatekeeper::getService(); |
| if (gk_device == nullptr) |
| return false; |
| android::hardware::hidl_vec<uint8_t> curPwdHandle; |
| curPwdHandle.setToExternal(const_cast<uint8_t *>((const uint8_t *)handle.c_str()), st.st_size); |
| android::hardware::hidl_vec<uint8_t> enteredPwd; |
| enteredPwd.setToExternal(const_cast<uint8_t *>((const uint8_t *)Password.c_str()), Password.size()); |
| |
| android::hardware::Return<void> hwRet = |
| gk_device->verify(user_id, 0 /* challange */, |
| curPwdHandle, |
| enteredPwd, |
| [&ret, &request_reenroll, &auth_token, &auth_token_len] |
| (const android::hardware::gatekeeper::V1_0::GatekeeperResponse &rsp) { |
| ret = static_cast<int>(rsp.code); // propagate errors |
| if (rsp.code >= android::hardware::gatekeeper::V1_0::GatekeeperStatusCode::STATUS_OK) { |
| auth_token = new uint8_t[rsp.data.size()]; |
| auth_token_len = rsp.data.size(); |
| memcpy(auth_token, rsp.data.data(), auth_token_len); |
| request_reenroll = (rsp.code == android::hardware::gatekeeper::V1_0::GatekeeperStatusCode::STATUS_REENROLL); |
| ret = 0; // all success states are reported as 0 |
| } else if (rsp.code == android::hardware::gatekeeper::V1_0::GatekeeperStatusCode::ERROR_RETRY_TIMEOUT && rsp.timeout > 0) { |
| ret = rsp.timeout; |
| } |
| } |
| ); |
| if (!hwRet.isOk()) { |
| return false; |
| } |
| |
| char token_hex[(auth_token_len*2)+1]; |
| token_hex[(auth_token_len*2)] = 0; |
| uint32_t i; |
| for (i=0;i<auth_token_len;i++) { |
| sprintf(&token_hex[2*i], "%02X", auth_token[i]); |
| } |
| // The secret is "Android FBE credential hash" plus appended 0x00 to reach 128 bytes then append the user's password then feed that to sha512sum |
| std::string secret = HashPassword(Password); |
| if (!fscrypt_unlock_user_key(user_id, 0, token_hex, secret.c_str())) { |
| printf("fscrypt_unlock_user_key returned fail\n"); |
| return false; |
| } |
| |
| if (!fscrypt_prepare_user_storage("", user_id, 0, flags)) { |
| printf("failed to fscrypt_prepare_user_storage\n"); |
| return false; |
| } |
| printf("User %i Decrypted Successfully!\n", user_id); |
| return true; |
| } |