| /* |
| * Copyright (C) 2014 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| // This module creates a special filesystem containing two files. |
| // |
| // "/sideload/package.zip" appears to be a normal file, but reading |
| // from it causes data to be fetched from the adb host. We can use |
| // this to sideload packages over an adb connection without having to |
| // store the entire package in RAM on the device. |
| // |
| // Because we may not trust the adb host, this filesystem maintains |
| // the following invariant: each read of a given position returns the |
| // same data as the first read at that position. That is, once a |
| // section of the file is read, future reads of that section return |
| // the same data. (Otherwise, a malicious adb host process could |
| // return one set of bits when the package is read for signature |
| // verification, and then different bits for when the package is |
| // accessed by the installer.) If the adb host returns something |
| // different than it did on the first read, the reader of the file |
| // will see their read fail with EINVAL. |
| // |
| // The other file, "/sideload/exit", is used to control the subprocess |
| // that creates this filesystem. Calling stat() on the exit file |
| // causes the filesystem to be unmounted and the adb process on the |
| // device shut down. |
| // |
| // Note that only the minimal set of file operations needed for these |
| // two files is implemented. In particular, you can't opendir() or |
| // readdir() on the "/sideload" directory; ls on it won't work. |
| |
| #include "fuse_sideload.h" |
| |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <limits.h> |
| #include "fuse.h" |
| #include <pthread.h> |
| #include <stdint.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/mount.h> |
| #include <sys/param.h> // MIN |
| #include <sys/stat.h> |
| #include <sys/uio.h> |
| #include <unistd.h> |
| |
| #ifdef USE_MINCRYPT |
| #include "mincrypt/sha256.h" |
| #define SHA256_DIGEST_LENGTH SHA256_DIGEST_SIZE |
| #else |
| #include <openssl/sha.h> |
| #endif |
| |
| #include <array> |
| #include <string> |
| #include <vector> |
| |
| //#include <android-base/stringprintf.h> |
| //#include <android-base/unique_fd.h> |
| |
| static constexpr uint64_t PACKAGE_FILE_ID = FUSE_ROOT_ID + 1; |
| static constexpr uint64_t EXIT_FLAG_ID = FUSE_ROOT_ID + 2; |
| |
| static constexpr int NO_STATUS = 1; |
| static constexpr int NO_STATUS_EXIT = 2; |
| |
| using SHA256Digest = std::array<uint8_t, SHA256_DIGEST_LENGTH>; |
| |
| #ifndef MIN |
| #define MIN(a, b) ((a) < (b) ? (a) : (b)) |
| #endif |
| |
| struct fuse_data { |
| int ffd; // file descriptor for the fuse socket |
| |
| FuseDataProvider* provider; // Provider of the source data. |
| |
| uint64_t file_size; // bytes |
| |
| uint32_t block_size; // block size that the adb host is using to send the file to us |
| uint32_t file_blocks; // file size in block_size blocks |
| |
| uid_t uid; |
| gid_t gid; |
| |
| uint32_t curr_block; // cache the block most recently read from the host |
| uint8_t* block_data; |
| |
| uint8_t* extra_block; // another block of storage for reads that span two blocks |
| |
| uint8_t* hashes; // SHA-256 hash of each block (all zeros |
| // if block hasn't been read yet) |
| }; |
| |
| static void fuse_reply(const fuse_data* fd, uint64_t unique, const void* data, size_t len) { |
| fuse_out_header hdr; |
| hdr.len = len + sizeof(hdr); |
| hdr.error = 0; |
| hdr.unique = unique; |
| |
| struct iovec vec[2]; |
| vec[0].iov_base = &hdr; |
| vec[0].iov_len = sizeof(hdr); |
| vec[1].iov_base = const_cast<void*>(data); |
| vec[1].iov_len = len; |
| |
| int res = writev(fd->ffd, vec, 2); |
| if (res == -1) { |
| printf("*** REPLY FAILED *** %s\n", strerror(errno)); |
| } |
| } |
| |
| static int handle_init(void* data, fuse_data* fd, const fuse_in_header* hdr) { |
| const fuse_init_in* req = static_cast<const fuse_init_in*>(data); |
| |
| // Kernel 2.6.16 is the first stable kernel with struct fuse_init_out defined (fuse version 7.6). |
| // The structure is the same from 7.6 through 7.22. Beginning with 7.23, the structure increased |
| // in size and added new parameters. |
| if (req->major != FUSE_KERNEL_VERSION || req->minor < 6) { |
| printf("Fuse kernel version mismatch: Kernel version %d.%d, Expected at least %d.6", req->major, |
| req->minor, FUSE_KERNEL_VERSION); |
| return -1; |
| } |
| |
| fuse_init_out out; |
| out.minor = MIN(req->minor, FUSE_KERNEL_MINOR_VERSION); |
| size_t fuse_struct_size = sizeof(out); |
| #if defined(FUSE_COMPAT_22_INIT_OUT_SIZE) |
| /* FUSE_KERNEL_VERSION >= 23. */ |
| |
| // If the kernel only works on minor revs older than or equal to 22, then use the older structure |
| // size since this code only uses the 7.22 version of the structure. |
| if (req->minor <= 22) { |
| fuse_struct_size = FUSE_COMPAT_22_INIT_OUT_SIZE; |
| } |
| #endif |
| |
| out.major = FUSE_KERNEL_VERSION; |
| out.max_readahead = req->max_readahead; |
| out.flags = 0; |
| out.max_background = 32; |
| out.congestion_threshold = 32; |
| out.max_write = 4096; |
| fuse_reply(fd, hdr->unique, &out, fuse_struct_size); |
| |
| return NO_STATUS; |
| } |
| |
| static void fill_attr(fuse_attr* attr, const fuse_data* fd, uint64_t nodeid, uint64_t size, |
| uint32_t mode) { |
| memset(attr, 0, sizeof(*attr)); |
| attr->nlink = 1; |
| attr->uid = fd->uid; |
| attr->gid = fd->gid; |
| attr->blksize = 4096; |
| |
| attr->ino = nodeid; |
| attr->size = size; |
| attr->blocks = (size == 0) ? 0 : (((size - 1) / attr->blksize) + 1); |
| attr->mode = mode; |
| } |
| |
| static int handle_getattr(void* /* data */, const fuse_data* fd, const fuse_in_header* hdr) { |
| struct fuse_attr_out out; |
| memset(&out, 0, sizeof(out)); |
| out.attr_valid = 10; |
| |
| if (hdr->nodeid == FUSE_ROOT_ID) { |
| fill_attr(&(out.attr), fd, hdr->nodeid, 4096, S_IFDIR | 0555); |
| } else if (hdr->nodeid == PACKAGE_FILE_ID) { |
| fill_attr(&(out.attr), fd, PACKAGE_FILE_ID, fd->file_size, S_IFREG | 0444); |
| } else if (hdr->nodeid == EXIT_FLAG_ID) { |
| fill_attr(&(out.attr), fd, EXIT_FLAG_ID, 0, S_IFREG | 0); |
| } else { |
| return -ENOENT; |
| } |
| |
| fuse_reply(fd, hdr->unique, &out, sizeof(out)); |
| return (hdr->nodeid == EXIT_FLAG_ID) ? NO_STATUS_EXIT : NO_STATUS; |
| } |
| |
| static int handle_lookup(void* data, const fuse_data* fd, const fuse_in_header* hdr) { |
| if (data == nullptr) return -ENOENT; |
| |
| struct fuse_entry_out out; |
| memset(&out, 0, sizeof(out)); |
| out.entry_valid = 10; |
| out.attr_valid = 10; |
| |
| std::string filename(static_cast<const char*>(data)); |
| if (filename == FUSE_SIDELOAD_HOST_FILENAME) { |
| out.nodeid = PACKAGE_FILE_ID; |
| out.generation = PACKAGE_FILE_ID; |
| fill_attr(&(out.attr), fd, PACKAGE_FILE_ID, fd->file_size, S_IFREG | 0444); |
| } else if (filename == FUSE_SIDELOAD_HOST_EXIT_FLAG) { |
| out.nodeid = EXIT_FLAG_ID; |
| out.generation = EXIT_FLAG_ID; |
| fill_attr(&(out.attr), fd, EXIT_FLAG_ID, 0, S_IFREG | 0); |
| } else { |
| return -ENOENT; |
| } |
| |
| fuse_reply(fd, hdr->unique, &out, sizeof(out)); |
| return (out.nodeid == EXIT_FLAG_ID) ? NO_STATUS_EXIT : NO_STATUS; |
| } |
| |
| static int handle_open(void* /* data */, const fuse_data* fd, const fuse_in_header* hdr) { |
| if (hdr->nodeid == EXIT_FLAG_ID) return -EPERM; |
| if (hdr->nodeid != PACKAGE_FILE_ID) return -ENOENT; |
| |
| struct fuse_open_out out; |
| memset(&out, 0, sizeof(out)); |
| out.fh = 10; // an arbitrary number; we always use the same handle |
| fuse_reply(fd, hdr->unique, &out, sizeof(out)); |
| return NO_STATUS; |
| } |
| |
| static int handle_flush(void* /* data */, fuse_data* /* fd */, const fuse_in_header* /* hdr */) { |
| return 0; |
| } |
| |
| static int handle_release(void* /* data */, fuse_data* /* fd */, const fuse_in_header* /* hdr */) { |
| return 0; |
| } |
| |
| // Fetch a block from the host into fd->curr_block and fd->block_data. |
| // Returns 0 on successful fetch, negative otherwise. |
| static int fetch_block(fuse_data* fd, uint32_t block) { |
| if (block == fd->curr_block) { |
| return 0; |
| } |
| |
| if (block >= fd->file_blocks) { |
| memset(fd->block_data, 0, fd->block_size); |
| fd->curr_block = block; |
| return 0; |
| } |
| |
| uint32_t fetch_size = fd->block_size; |
| if (block * fd->block_size + fetch_size > fd->file_size) { |
| // If we're reading the last (partial) block of the file, expect a shorter response from the |
| // host, and pad the rest of the block with zeroes. |
| fetch_size = fd->file_size - (block * fd->block_size); |
| memset(fd->block_data + fetch_size, 0, fd->block_size - fetch_size); |
| } |
| |
| if (!fd->provider->ReadBlockAlignedData(fd->block_data, fetch_size, block)) { |
| return -EIO; |
| } |
| |
| fd->curr_block = block; |
| |
| // Verify the hash of the block we just got from the host. |
| // |
| // - If the hash of the just-received data matches the stored hash for the block, accept it. |
| // - If the stored hash is all zeroes, store the new hash and accept the block (this is the first |
| // time we've read this block). |
| // - Otherwise, return -EINVAL for the read. |
| |
| uint8_t hash[SHA256_DIGEST_LENGTH]; |
| #ifdef USE_MINCRYPT |
| SHA256_hash(fd->block_data, fd->block_size, hash); |
| #else |
| SHA256(fd->block_data, fd->block_size, hash); |
| #endif |
| uint8_t* blockhash = fd->hashes + block * SHA256_DIGEST_LENGTH; |
| if (memcmp(hash, blockhash, SHA256_DIGEST_LENGTH) == 0) { |
| return 0; |
| } |
| |
| int i; |
| for (i = 0; i < SHA256_DIGEST_LENGTH; ++i) { |
| if (blockhash[i] != 0) { |
| fd->curr_block = -1; |
| return -EIO; |
| } |
| } |
| |
| memcpy(blockhash, hash, SHA256_DIGEST_LENGTH); |
| return 0; |
| } |
| |
| static int handle_read(void* data, fuse_data* fd, const fuse_in_header* hdr) { |
| if (hdr->nodeid != PACKAGE_FILE_ID) return -ENOENT; |
| |
| const fuse_read_in* req = static_cast<const fuse_read_in*>(data); |
| uint64_t offset = req->offset; |
| uint32_t size = req->size; |
| |
| // The docs on the fuse kernel interface are vague about what to do when a read request extends |
| // past the end of the file. We can return a short read -- the return structure does include a |
| // length field -- but in testing that caused the program using the file to segfault. (I |
| // speculate that this is due to the reading program accessing it via mmap; maybe mmap dislikes |
| // when you return something short of a whole page?) To fix this we zero-pad reads that extend |
| // past the end of the file so we're always returning exactly as many bytes as were requested. |
| // (Users of the mapped file have to know its real length anyway.) |
| |
| fuse_out_header outhdr; |
| outhdr.len = sizeof(outhdr) + size; |
| outhdr.error = 0; |
| outhdr.unique = hdr->unique; |
| |
| struct iovec vec[3]; |
| vec[0].iov_base = &outhdr; |
| vec[0].iov_len = sizeof(outhdr); |
| |
| uint32_t block = offset / fd->block_size; |
| int result = fetch_block(fd, block); |
| if (result != 0) return result; |
| |
| // Two cases: |
| // |
| // - the read request is entirely within this block. In this case we can reply immediately. |
| // |
| // - the read request goes over into the next block. Note that since we mount the filesystem |
| // with max_read=block_size, a read can never span more than two blocks. In this case we copy |
| // the block to extra_block and issue a fetch for the following block. |
| |
| uint32_t block_offset = offset - (block * fd->block_size); |
| |
| int vec_used; |
| if (size + block_offset <= fd->block_size) { |
| // First case: the read fits entirely in the first block. |
| |
| vec[1].iov_base = fd->block_data + block_offset; |
| vec[1].iov_len = size; |
| vec_used = 2; |
| } else { |
| // Second case: the read spills over into the next block. |
| |
| memcpy(fd->extra_block, fd->block_data + block_offset, fd->block_size - block_offset); |
| vec[1].iov_base = fd->extra_block; |
| vec[1].iov_len = fd->block_size - block_offset; |
| |
| result = fetch_block(fd, block + 1); |
| if (result != 0) return result; |
| vec[2].iov_base = fd->block_data; |
| vec[2].iov_len = size - vec[1].iov_len; |
| vec_used = 3; |
| } |
| |
| if (writev(fd->ffd, vec, vec_used) == -1) { |
| printf("*** READ REPLY FAILED: %s ***\n", strerror(errno)); |
| } |
| return NO_STATUS; |
| } |
| |
| int run_fuse_sideload(std::unique_ptr<FuseDataProvider>&& provider, const char* mount_point) { |
| // If something's already mounted on our mountpoint, try to remove it. (Mostly in case of a |
| // previous abnormal exit.) |
| umount2(mount_point, MNT_FORCE); |
| |
| uint64_t file_size = provider->file_size(); |
| uint32_t block_size = provider->fuse_block_size(); |
| |
| // fs/fuse/inode.c in kernel code uses the greater of 4096 and the passed-in max_read. |
| if (block_size < 4096) { |
| fprintf(stderr, "block size (%u) is too small\n", block_size); |
| return -1; |
| } |
| if (block_size > (1 << 22)) { // 4 MiB |
| fprintf(stderr, "block size (%u) is too large\n", block_size); |
| return -1; |
| } |
| |
| <<<<<<< HEAD:fuse_sideload.cpp |
| fuse_data fd; |
| memset(&fd, 0, sizeof(fd)); |
| fd.vtab = vtab; |
| ======= |
| fuse_data fd = {}; |
| fd.provider = provider.get(); |
| >>>>>>> android-10.0.0_r25:fuse_sideload/fuse_sideload.cpp |
| fd.file_size = file_size; |
| fd.block_size = block_size; |
| fd.file_blocks = (file_size == 0) ? 0 : (((file_size - 1) / block_size) + 1); |
| |
| int result; |
| if (fd.file_blocks > (1 << 18)) { |
| fprintf(stderr, "file has too many blocks (%u)\n", fd.file_blocks); |
| result = -1; |
| goto done; |
| } |
| |
| fd.hashes = (uint8_t*)calloc(fd.file_blocks, SHA256_DIGEST_LENGTH); |
| if (fd.hashes == NULL) { |
| fprintf(stderr, "failed to allocate %d bites for hashes\n", |
| fd.file_blocks * SHA256_DIGEST_LENGTH); |
| result = -1; |
| goto done; |
| } |
| |
| fd.uid = getuid(); |
| fd.gid = getgid(); |
| |
| fd.curr_block = -1; |
| fd.block_data = static_cast<uint8_t*>(malloc(block_size)); |
| if (fd.block_data == nullptr) { |
| fprintf(stderr, "failed to allocate %d bites for block_data\n", block_size); |
| result = -1; |
| goto done; |
| } |
| fd.extra_block = static_cast<uint8_t*>(malloc(block_size)); |
| if (fd.extra_block == nullptr) { |
| fprintf(stderr, "failed to allocate %d bites for extra_block\n", block_size); |
| result = -1; |
| goto done; |
| } |
| |
| <<<<<<< HEAD:fuse_sideload.cpp |
| fd.ffd = open("/dev/fuse", O_RDWR); |
| if (!fd.ffd) { |
| ======= |
| fd.ffd.reset(open("/dev/fuse", O_RDWR)); |
| if (fd.ffd == -1) { |
| >>>>>>> android-10.0.0_r25:fuse_sideload/fuse_sideload.cpp |
| perror("open /dev/fuse"); |
| result = -1; |
| goto done; |
| } |
| |
| { |
| char opts[256]; |
| snprintf(opts, sizeof(opts), |
| ("fd=%d,user_id=%d,group_id=%d,max_read=%u," |
| "allow_other,rootmode=040000"), |
| fd.ffd, fd.uid, fd.gid, block_size); |
| |
| result = mount("/dev/fuse", FUSE_SIDELOAD_HOST_MOUNTPOINT, "fuse", |
| MS_NOSUID | MS_NODEV | MS_RDONLY | MS_NOEXEC, opts); |
| if (result < 0) { |
| perror("mount"); |
| goto done; |
| } |
| } |
| |
| uint8_t request_buffer[sizeof(fuse_in_header) + PATH_MAX * 8]; |
| for (;;) { |
| ssize_t len = TEMP_FAILURE_RETRY(read(fd.ffd, request_buffer, sizeof(request_buffer))); |
| if (len == -1) { |
| perror("read request"); |
| if (errno == ENODEV) { |
| result = -1; |
| break; |
| } |
| continue; |
| } |
| |
| if (static_cast<size_t>(len) < sizeof(fuse_in_header)) { |
| fprintf(stderr, "request too short: len=%zd\n", len); |
| continue; |
| } |
| |
| fuse_in_header* hdr = reinterpret_cast<fuse_in_header*>(request_buffer); |
| void* data = request_buffer + sizeof(fuse_in_header); |
| |
| result = -ENOSYS; |
| |
| switch (hdr->opcode) { |
| case FUSE_INIT: |
| result = handle_init(data, &fd, hdr); |
| break; |
| |
| case FUSE_LOOKUP: |
| result = handle_lookup(data, &fd, hdr); |
| break; |
| |
| case FUSE_GETATTR: |
| result = handle_getattr(data, &fd, hdr); |
| break; |
| |
| case FUSE_OPEN: |
| result = handle_open(data, &fd, hdr); |
| break; |
| |
| case FUSE_READ: |
| result = handle_read(data, &fd, hdr); |
| break; |
| |
| case FUSE_FLUSH: |
| result = handle_flush(data, &fd, hdr); |
| break; |
| |
| case FUSE_RELEASE: |
| result = handle_release(data, &fd, hdr); |
| break; |
| |
| default: |
| fprintf(stderr, "unknown fuse request opcode %d\n", hdr->opcode); |
| break; |
| } |
| |
| if (result == NO_STATUS_EXIT) { |
| result = 0; |
| break; |
| } |
| |
| if (result != NO_STATUS) { |
| fuse_out_header outhdr; |
| outhdr.len = sizeof(outhdr); |
| outhdr.error = result; |
| outhdr.unique = hdr->unique; |
| TEMP_FAILURE_RETRY(write(fd.ffd, &outhdr, sizeof(outhdr))); |
| } |
| } |
| |
| done: |
| provider->Close(); |
| |
| if (umount2(mount_point, MNT_DETACH) == -1) { |
| fprintf(stderr, "fuse_sideload umount failed: %s\n", strerror(errno)); |
| } |
| |
| free(fd.block_data); |
| free(fd.extra_block); |
| |
| return result; |
| } |
| |
| extern "C" int run_old_fuse_sideload(const struct provider_vtab& vtab, void* cookie __unused, |
| uint64_t file_size, uint32_t block_size) |
| { |
| return run_fuse_sideload(vtab, file_size, block_size, FUSE_SIDELOAD_HOST_MOUNTPOINT); |
| } |