blob: 73c4066aa449207f74da7385bb433ca35d71c4d6 [file] [log] [blame]
/*
* Copyright (C) 2007 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <dirent.h>
#include <sys/poll.h>
#include <limits.h>
#include <linux/input.h>
#include "../common.h"
#include "minui.h"
//#define _EVENT_LOGGING
#define MAX_DEVICES 16
#define VIBRATOR_TIMEOUT_FILE "/sys/class/timed_output/vibrator/enable"
#define VIBRATOR_TIME_MS 50
#ifndef SYN_REPORT
#define SYN_REPORT 0x00
#endif
#ifndef SYN_CONFIG
#define SYN_CONFIG 0x01
#endif
#ifndef SYN_MT_REPORT
#define SYN_MT_REPORT 0x02
#endif
#define ABS_MT_POSITION 0x2a /* Group a set of X and Y */
#define ABS_MT_AMPLITUDE 0x2b /* Group a set of Z and W */
#define ABS_MT_SLOT 0x2f
#define ABS_MT_TOUCH_MAJOR 0x30
#define ABS_MT_TOUCH_MINOR 0x31
#define ABS_MT_WIDTH_MAJOR 0x32
#define ABS_MT_WIDTH_MINOR 0x33
#define ABS_MT_ORIENTATION 0x34
#define ABS_MT_POSITION_X 0x35
#define ABS_MT_POSITION_Y 0x36
#define ABS_MT_TOOL_TYPE 0x37
#define ABS_MT_BLOB_ID 0x38
#define ABS_MT_TRACKING_ID 0x39
#define ABS_MT_PRESSURE 0x3a
#define ABS_MT_DISTANCE 0x3b
enum {
DOWN_NOT,
DOWN_SENT,
DOWN_RELEASED,
};
struct virtualkey {
int scancode;
int centerx, centery;
int width, height;
};
struct position {
int x, y;
int synced;
struct input_absinfo xi, yi;
};
struct ev {
struct pollfd *fd;
struct virtualkey *vks;
int vk_count;
char deviceName[64];
int ignored;
struct position p, mt_p;
int down;
};
static struct pollfd ev_fds[MAX_DEVICES];
static struct ev evs[MAX_DEVICES];
static unsigned ev_count = 0;
static inline int ABS(int x) {
return x<0?-x:x;
}
int vibrate(int timeout_ms)
{
char str[20];
int fd;
int ret;
fd = open(VIBRATOR_TIMEOUT_FILE, O_WRONLY);
if (fd < 0)
return -1;
ret = snprintf(str, sizeof(str), "%d", timeout_ms);
ret = write(fd, str, ret);
close(fd);
if (ret < 0)
return -1;
return 0;
}
/* Returns empty tokens */
static char *vk_strtok_r(char *str, const char *delim, char **save_str)
{
if(!str)
{
if(!*save_str)
return NULL;
str = (*save_str) + 1;
}
*save_str = strpbrk(str, delim);
if (*save_str)
**save_str = '\0';
return str;
}
static int vk_init(struct ev *e)
{
char vk_path[PATH_MAX] = "/sys/board_properties/virtualkeys.";
char vks[2048], *ts = NULL;
ssize_t len;
int vk_fd;
int i;
e->vk_count = 0;
len = strlen(vk_path);
len = ioctl(e->fd->fd, EVIOCGNAME(sizeof(e->deviceName)), e->deviceName);
if (len <= 0)
{
printf("Unable to query event object.\n");
return -1;
}
#ifdef _EVENT_LOGGING
printf("Event object: %s\n", e->deviceName);
#endif
// Blacklist these "input" devices
if (strcmp(e->deviceName, "bma250") == 0 || strcmp(e->deviceName, "bma150") == 0)
{
e->ignored = 1;
}
strcat(vk_path, e->deviceName);
// Some devices split the keys from the touchscreen
e->vk_count = 0;
vk_fd = open(vk_path, O_RDONLY);
if (vk_fd >= 0)
{
len = read(vk_fd, vks, sizeof(vks)-1);
close(vk_fd);
if (len <= 0)
return -1;
vks[len] = '\0';
/* Parse a line like:
keytype:keycode:centerx:centery:width:height:keytype2:keycode2:centerx2:...
*/
for (ts = vks, e->vk_count = 1; *ts; ++ts) {
if (*ts == ':')
++e->vk_count;
}
if (e->vk_count % 6) {
printf("minui: %s is %d %% 6\n", vk_path, e->vk_count % 6);
}
e->vk_count /= 6;
if (e->vk_count <= 0)
return -1;
e->down = DOWN_NOT;
}
ioctl(e->fd->fd, EVIOCGABS(ABS_X), &e->p.xi);
ioctl(e->fd->fd, EVIOCGABS(ABS_Y), &e->p.yi);
e->p.synced = 0;
#ifdef _EVENT_LOGGING
printf("EV: ST minX: %d maxX: %d minY: %d maxY: %d\n", e->p.xi.minimum, e->p.xi.maximum, e->p.yi.minimum, e->p.yi.maximum);
#endif
ioctl(e->fd->fd, EVIOCGABS(ABS_MT_POSITION_X), &e->mt_p.xi);
ioctl(e->fd->fd, EVIOCGABS(ABS_MT_POSITION_Y), &e->mt_p.yi);
e->mt_p.synced = 0;
#ifdef _EVENT_LOGGING
printf("EV: MT minX: %d maxX: %d minY: %d maxY: %d\n", e->mt_p.xi.minimum, e->mt_p.xi.maximum, e->mt_p.yi.minimum, e->mt_p.yi.maximum);
#endif
e->vks = malloc(sizeof(*e->vks) * e->vk_count);
for (i = 0; i < e->vk_count; ++i) {
char *token[6];
int j;
for (j = 0; j < 6; ++j) {
token[j] = vk_strtok_r((i||j)?NULL:vks, ":", &ts);
}
if (strcmp(token[0], "0x01") != 0) {
/* Java does string compare, so we do too. */
printf("minui: %s: ignoring unknown virtual key type %s\n", vk_path, token[0]);
continue;
}
e->vks[i].scancode = strtol(token[1], NULL, 0);
e->vks[i].centerx = strtol(token[2], NULL, 0);
e->vks[i].centery = strtol(token[3], NULL, 0);
e->vks[i].width = strtol(token[4], NULL, 0);
e->vks[i].height = strtol(token[5], NULL, 0);
}
return 0;
}
int ev_init(void)
{
DIR *dir;
struct dirent *de;
int fd;
dir = opendir("/dev/input");
if(dir != 0) {
while((de = readdir(dir))) {
// fprintf(stderr,"/dev/input/%s\n", de->d_name);
if(strncmp(de->d_name,"event",5)) continue;
fd = openat(dirfd(dir), de->d_name, O_RDONLY);
if(fd < 0) continue;
ev_fds[ev_count].fd = fd;
ev_fds[ev_count].events = POLLIN;
evs[ev_count].fd = &ev_fds[ev_count];
/* Load virtualkeys if there are any */
vk_init(&evs[ev_count]);
ev_count++;
if(ev_count == MAX_DEVICES) break;
}
}
return 0;
}
void ev_exit(void)
{
while (ev_count-- > 0) {
if (evs[ev_count].vk_count) {
free(evs[ev_count].vks);
evs[ev_count].vk_count = 0;
}
close(ev_fds[ev_count].fd);
}
}
static int vk_inside_display(__s32 value, struct input_absinfo *info, int screen_size)
{
int screen_pos;
if (info->minimum == info->maximum)
return 0;
screen_pos = (value - info->minimum) * (screen_size - 1) / (info->maximum - info->minimum);
return (screen_pos >= 0 && screen_pos < screen_size);
}
static int vk_tp_to_screen(struct position *p, int *x, int *y)
{
if (p->xi.minimum == p->xi.maximum || p->yi.minimum == p->yi.maximum)
{
// In this case, we assume the screen dimensions are the same.
*x = p->x;
*y = p->y;
return 0;
}
#ifdef _EVENT_LOGGING
printf("EV: p->x=%d x-range=%d,%d fb-width=%d\n", p->x, p->xi.minimum, p->xi.maximum, gr_fb_width());
#endif
#ifndef RECOVERY_TOUCHSCREEN_SWAP_XY
int fb_width = gr_fb_width();
int fb_height = gr_fb_height();
#else
// We need to swap the scaling sizes, too
int fb_width = gr_fb_height();
int fb_height = gr_fb_width();
#endif
*x = (p->x - p->xi.minimum) * (fb_width - 1) / (p->xi.maximum - p->xi.minimum);
*y = (p->y - p->yi.minimum) * (fb_height - 1) / (p->yi.maximum - p->yi.minimum);
if (*x >= 0 && *x < fb_width &&
*y >= 0 && *y < fb_height)
{
return 0;
}
return 1;
}
/* Translate a virtual key in to a real key event, if needed */
/* Returns non-zero when the event should be consumed */
static int vk_modify(struct ev *e, struct input_event *ev)
{
static int downX = -1, downY = -1;
static int discard = 0;
static int lastWasSynReport = 0;
static int touchReleaseOnNextSynReport = 0;
int i;
int x, y;
// This is used to ditch useless event handlers, like an accelerometer
if (e->ignored) return 1;
if (ev->type == EV_REL && ev->code == REL_Z)
{
// This appears to be an accelerometer or another strange input device. It's not the touchscreen.
#ifdef _EVENT_LOGGING
printf("EV: Device disabled due to non-touchscreen messages.\n");
#endif
e->ignored = 1;
return 1;
}
#ifdef _EVENT_LOGGING
printf("EV: %s => type: %x code: %x value: %d\n", e->deviceName, ev->type, ev->code, ev->value);
#endif
// Handle keyboard events, value of 1 indicates key down, 0 indicates key up
if (ev->type == EV_KEY) {
return 0;
}
if (ev->type == EV_ABS) {
switch (ev->code) {
case ABS_X: //00
e->p.synced |= 0x01;
e->p.x = ev->value;
#ifdef _EVENT_LOGGING
printf("EV: %s => EV_ABS ABS_X %d\n", e->deviceName, ev->value);
#endif
break;
case ABS_Y: //01
e->p.synced |= 0x02;
e->p.y = ev->value;
#ifdef _EVENT_LOGGING
printf("EV: %s => EV_ABS ABS_Y %d\n", e->deviceName, ev->value);
#endif
break;
case ABS_MT_POSITION: //2a
e->mt_p.synced = 0x03;
if (ev->value == (1 << 31))
{
e->mt_p.x = 0;
e->mt_p.y = 0;
lastWasSynReport = 1;
}
else
{
lastWasSynReport = 0;
e->mt_p.x = (ev->value & 0x7FFF0000) >> 16;
e->mt_p.y = (ev->value & 0xFFFF);
}
break;
case ABS_MT_TOUCH_MAJOR: //30
if (ev->value == 0)
{
// We're in a touch release, although some devices will still send positions as well
e->mt_p.x = 0;
e->mt_p.y = 0;
touchReleaseOnNextSynReport = 1;
}
#ifdef _EVENT_LOGGING
printf("EV: %s => EV_ABS ABS_MT_TOUCH_MAJOR %d\n", e->deviceName, ev->value);
#endif
break;
case ABS_MT_PRESSURE: //3a
if (ev->value == 0)
{
// We're in a touch release, although some devices will still send positions as well
e->mt_p.x = 0;
e->mt_p.y = 0;
touchReleaseOnNextSynReport = 1;
}
#ifdef _EVENT_LOGGING
printf("EV: %s => EV_ABS ABS_MT_PRESSURE %d\n", e->deviceName, ev->value);
#endif
break;
case ABS_MT_POSITION_X: //35
e->mt_p.synced |= 0x01;
e->mt_p.x = ev->value;
#ifdef _EVENT_LOGGING
printf("EV: %s => EV_ABS ABS_MT_POSITION_X %d\n", e->deviceName, ev->value);
#endif
break;
case ABS_MT_POSITION_Y: //36
e->mt_p.synced |= 0x02;
e->mt_p.y = ev->value;
#ifdef _EVENT_LOGGING
printf("EV: %s => EV_ABS ABS_MT_POSITION_Y %d\n", e->deviceName, ev->value);
#endif
break;
#ifdef _EVENT_LOGGING
// All of these items are strictly for logging purposes only. Return 1 because they don't need to be handled.
case ABS_MT_TOUCH_MINOR: //31
printf("EV: %s => EV_ABS ABS_MT_TOUCH_MINOR %d\n", e->deviceName, ev->value);
return 1;
break;
case ABS_MT_WIDTH_MAJOR: //32
printf("EV: %s => EV_ABS ABS_MT_WIDTH_MAJOR %d\n", e->deviceName, ev->value);
return 1;
break;
case ABS_MT_WIDTH_MINOR: //33
printf("EV: %s => EV_ABS ABS_MT_WIDTH_MINOR %d\n", e->deviceName, ev->value);
return 1;
break;
case ABS_MT_ORIENTATION: //34
printf("EV: %s => EV_ABS ABS_MT_ORIENTATION %d\n", e->deviceName, ev->value);
return 1;
break;
case ABS_MT_TOOL_TYPE: //37
LOGI("EV: %s => EV_ABS ABS_MT_TOOL_TYPE %d\n", e->deviceName, ev->value);
return 1;
break;
case ABS_MT_BLOB_ID: //38
printf("EV: %s => EV_ABS ABS_MT_BLOB_ID %d\n", e->deviceName, ev->value);
return 1;
break;
case ABS_MT_TRACKING_ID: //39
printf("EV: %s => EV_ABS ABS_MT_TRACKING_ID %d\n", e->deviceName, ev->value);
return 1;
break;
case ABS_MT_DISTANCE: //3b
printf("EV: %s => EV_ABS ABS_MT_DISTANCE %d\n", e->deviceName, ev->value);
return 1;
break;
#endif
default:
// This is an unhandled message, just skip it
return 1;
}
if (ev->code != ABS_MT_POSITION)
{
lastWasSynReport = 0;
return 1;
}
}
// Check if we should ignore the message
if (ev->code != ABS_MT_POSITION && (ev->type != EV_SYN || (ev->code != SYN_REPORT && ev->code != SYN_MT_REPORT)))
{
lastWasSynReport = 0;
return 0;
}
#ifdef _EVENT_LOGGING
if (ev->type == EV_SYN && ev->code == SYN_REPORT) printf("EV: %s => EV_SYN SYN_REPORT\n", e->deviceName);
if (ev->type == EV_SYN && ev->code == SYN_MT_REPORT) printf("EV: %s => EV_SYN SYN_MT_REPORT\n", e->deviceName);
#endif
// Discard the MT versions
if (ev->code == SYN_MT_REPORT) return 0;
if (lastWasSynReport == 1 || touchReleaseOnNextSynReport == 1)
{
// Reset the value
touchReleaseOnNextSynReport = 0;
// We are a finger-up state
if (!discard)
{
// Report the key up
ev->type = EV_ABS;
ev->code = 0;
ev->value = (downX << 16) | downY;
}
downX = -1;
downY = -1;
if (discard)
{
discard = 0;
return 1;
}
return 0;
}
lastWasSynReport = 1;
// Retrieve where the x,y position is
if (e->p.synced & 0x03)
{
vk_tp_to_screen(&e->p, &x, &y);
}
else if (e->mt_p.synced & 0x03)
{
vk_tp_to_screen(&e->mt_p, &x, &y);
}
else
{
// We don't have useful information to convey
return 1;
}
#ifdef RECOVERY_TOUCHSCREEN_SWAP_XY
x ^= y;
y ^= x;
x ^= y;
#endif
#ifdef RECOVERY_TOUCHSCREEN_FLIP_X
x = gr_fb_width() - x;
#endif
#ifdef RECOVERY_TOUCHSCREEN_FLIP_Y
y = gr_fb_height() - y;
#endif
#ifdef _EVENT_LOGGING
printf("EV: x: %d y: %d\n", x, y);
#endif
// Clear the current sync states
e->p.synced = e->mt_p.synced = 0;
// If we have nothing useful to report, skip it
if (x == -1 || y == -1) return 1;
// On first touch, see if we're at a virtual key
if (downX == -1)
{
// Attempt mapping to virtual key
for (i = 0; i < e->vk_count; ++i)
{
int xd = ABS(e->vks[i].centerx - x);
int yd = ABS(e->vks[i].centery - y);
if (xd < e->vks[i].width/2 && yd < e->vks[i].height/2)
{
ev->type = EV_KEY;
ev->code = e->vks[i].scancode;
ev->value = 1;
vibrate(VIBRATOR_TIME_MS);
// Mark that all further movement until lift is discard,
// and make sure we don't come back into this area
discard = 1;
downX = 0;
return 0;
}
}
}
// If we were originally a button press, discard this event
if (discard)
{
return 1;
}
// Record where we started the touch for deciding if this is a key or a scroll
downX = x;
downY = y;
ev->type = EV_ABS;
ev->code = 1;
ev->value = (x << 16) | y;
return 0;
}
int ev_get(struct input_event *ev, unsigned dont_wait)
{
int r;
unsigned n;
do {
r = poll(ev_fds, ev_count, dont_wait ? 0 : -1);
if(r > 0) {
for(n = 0; n < ev_count; n++) {
if(ev_fds[n].revents & POLLIN) {
r = read(ev_fds[n].fd, ev, sizeof(*ev));
if(r == sizeof(*ev)) {
if (!vk_modify(&evs[n], ev))
return 0;
}
}
}
}
} while(dont_wait == 0);
return -1;
}
int ev_wait(int timeout)
{
return -1;
}
void ev_dispatch(void)
{
return;
}
int ev_get_input(int fd, short revents, struct input_event *ev)
{
return -1;
}