| /* |
| * Copyright (C) 2014 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <stdbool.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <unistd.h> |
| |
| #include <fcntl.h> |
| #include <stdio.h> |
| |
| #include <sys/cdefs.h> |
| #include <sys/ioctl.h> |
| #include <sys/mman.h> |
| #include <sys/types.h> |
| |
| #include <linux/fb.h> |
| #include <linux/kd.h> |
| |
| #include "minui.h" |
| #include "graphics.h" |
| |
| static GRSurface* fbdev_init(minui_backend*); |
| static GRSurface* fbdev_flip(minui_backend*); |
| static void fbdev_blank(minui_backend*, bool); |
| static void fbdev_exit(minui_backend*); |
| |
| static GRSurface gr_framebuffer[2]; |
| static bool double_buffered; |
| static GRSurface* gr_draw = NULL; |
| static int displayed_buffer; |
| |
| static fb_var_screeninfo vi; |
| static int fb_fd = -1; |
| |
| static minui_backend my_backend = { |
| .init = fbdev_init, |
| .flip = fbdev_flip, |
| .blank = fbdev_blank, |
| .exit = fbdev_exit, |
| }; |
| |
| minui_backend* open_fbdev() { |
| return &my_backend; |
| } |
| |
| static void fbdev_blank(minui_backend* backend __unused, bool blank) |
| { |
| int ret; |
| |
| ret = ioctl(fb_fd, FBIOBLANK, blank ? FB_BLANK_POWERDOWN : FB_BLANK_UNBLANK); |
| if (ret < 0) |
| perror("ioctl(): blank"); |
| } |
| |
| static void set_displayed_framebuffer(unsigned n) |
| { |
| if (n > 1 || !double_buffered) return; |
| |
| vi.yres_virtual = gr_framebuffer[0].height * 2; |
| vi.yoffset = n * gr_framebuffer[0].height; |
| vi.bits_per_pixel = gr_framebuffer[0].pixel_bytes * 8; |
| if (ioctl(fb_fd, FBIOPUT_VSCREENINFO, &vi) < 0) { |
| perror("active fb swap failed"); |
| } |
| displayed_buffer = n; |
| } |
| |
| static GRSurface* fbdev_init(minui_backend* backend) { |
| int fd = open("/dev/graphics/fb0", O_RDWR); |
| if (fd == -1) { |
| perror("cannot open fb0"); |
| return NULL; |
| } |
| |
| fb_fix_screeninfo fi; |
| if (ioctl(fd, FBIOGET_FSCREENINFO, &fi) < 0) { |
| perror("failed to get fb0 info"); |
| close(fd); |
| return NULL; |
| } |
| |
| if (ioctl(fd, FBIOGET_VSCREENINFO, &vi) < 0) { |
| perror("failed to get fb0 info"); |
| close(fd); |
| return NULL; |
| } |
| |
| // We print this out for informational purposes only, but |
| // throughout we assume that the framebuffer device uses an RGBX |
| // pixel format. This is the case for every development device I |
| // have access to. For some of those devices (eg, hammerhead aka |
| // Nexus 5), FBIOGET_VSCREENINFO *reports* that it wants a |
| // different format (XBGR) but actually produces the correct |
| // results on the display when you write RGBX. |
| // |
| // If you have a device that actually *needs* another pixel format |
| // (ie, BGRX, or 565), patches welcome... |
| |
| printf("fb0 reports (possibly inaccurate):\n" |
| " vi.bits_per_pixel = %d\n" |
| " vi.red.offset = %3d .length = %3d\n" |
| " vi.green.offset = %3d .length = %3d\n" |
| " vi.blue.offset = %3d .length = %3d\n", |
| vi.bits_per_pixel, |
| vi.red.offset, vi.red.length, |
| vi.green.offset, vi.green.length, |
| vi.blue.offset, vi.blue.length); |
| |
| void* bits = mmap(0, fi.smem_len, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); |
| if (bits == MAP_FAILED) { |
| perror("failed to mmap framebuffer"); |
| close(fd); |
| return NULL; |
| } |
| |
| memset(bits, 0, fi.smem_len); |
| |
| gr_framebuffer[0].width = vi.xres; |
| gr_framebuffer[0].height = vi.yres; |
| gr_framebuffer[0].row_bytes = fi.line_length; |
| gr_framebuffer[0].pixel_bytes = vi.bits_per_pixel / 8; |
| gr_framebuffer[0].data = reinterpret_cast<uint8_t*>(bits); |
| memset(gr_framebuffer[0].data, 0, gr_framebuffer[0].height * gr_framebuffer[0].row_bytes); |
| |
| /* check if we can use double buffering */ |
| if (vi.yres * fi.line_length * 2 <= fi.smem_len) { |
| double_buffered = true; |
| |
| memcpy(gr_framebuffer+1, gr_framebuffer, sizeof(GRSurface)); |
| gr_framebuffer[1].data = gr_framebuffer[0].data + |
| gr_framebuffer[0].height * gr_framebuffer[0].row_bytes; |
| |
| gr_draw = gr_framebuffer+1; |
| |
| } else { |
| double_buffered = false; |
| |
| // Without double-buffering, we allocate RAM for a buffer to |
| // draw in, and then "flipping" the buffer consists of a |
| // memcpy from the buffer we allocated to the framebuffer. |
| |
| gr_draw = (GRSurface*) malloc(sizeof(GRSurface)); |
| memcpy(gr_draw, gr_framebuffer, sizeof(GRSurface)); |
| gr_draw->data = (unsigned char*) malloc(gr_draw->height * gr_draw->row_bytes); |
| if (!gr_draw->data) { |
| perror("failed to allocate in-memory surface"); |
| return NULL; |
| } |
| } |
| |
| memset(gr_draw->data, 0, gr_draw->height * gr_draw->row_bytes); |
| fb_fd = fd; |
| set_displayed_framebuffer(0); |
| |
| printf("framebuffer: %d (%d x %d)\n", fb_fd, gr_draw->width, gr_draw->height); |
| |
| fbdev_blank(backend, true); |
| fbdev_blank(backend, false); |
| |
| return gr_draw; |
| } |
| |
| static GRSurface* fbdev_flip(minui_backend* backend __unused) { |
| if (double_buffered) { |
| // Change gr_draw to point to the buffer currently displayed, |
| // then flip the driver so we're displaying the other buffer |
| // instead. |
| gr_draw = gr_framebuffer + displayed_buffer; |
| set_displayed_framebuffer(1-displayed_buffer); |
| } else { |
| // Copy from the in-memory surface to the framebuffer. |
| memcpy(gr_framebuffer[0].data, gr_draw->data, |
| gr_draw->height * gr_draw->row_bytes); |
| } |
| return gr_draw; |
| } |
| |
| static void fbdev_exit(minui_backend* backend __unused) { |
| close(fb_fd); |
| fb_fd = -1; |
| |
| if (!double_buffered && gr_draw) { |
| free(gr_draw->data); |
| free(gr_draw); |
| } |
| gr_draw = NULL; |
| } |