Convert all device markdown EOL to LF
Change-Id: Ic8c2508e4e0fdba787f9cb0070c92971cb909f19
diff --git a/_devices/samsunggalaxys2i9100.markdown b/_devices/samsunggalaxys2i9100.markdown
index f31f36a..ce475a3 100644
--- a/_devices/samsunggalaxys2i9100.markdown
+++ b/_devices/samsunggalaxys2i9100.markdown
@@ -1,53 +1,53 @@
----
-layout: device
-title: "Samsung Galaxy S2 i9100"
-codename: i9100
-downloadfolder: i9100
-supportstatus: Currently Supported via IsoRec
-maintainer: arnab
-oem: Samsung
-ddof: "/dev/block/mmcblk0p6"
-xdathread: "http://forum.xda-developers.com/galaxy-s2/development-derivatives/recovery-twrp-3-0-0-0-t3330457"
-devicetree: "https://github.com/TeamWin/android_device_samsung_i9100"
----
-
-{% include disclaimer.html %}
-
-{% include supportstatus.html %}
-
-NOTE: The i9100 does not support a separately bootable recovery partition. To install and use TWRP, you will need to install a custom kernel or boot image that supports IsoRec. You can find out more about IsoRec [here](http://forum.xda-developers.com/galaxy-s2/orig-development/isorec-isolated-recovery-galaxy-s2-t3291176).
-
-{% include download.html %}
-
-{% include twrpinstall.html %}
-
-<html>
-<div class='page-heading'>Flash via HeimdallSuite (Windows only):</div>
-<a id='heimdall'></a>
-<hr />
-<p class="text">Download HeimdallSuite & Samsung USB Drivers</p>
-<p class="text">Install Samsung USB Drivers</p>
-<p class="text">Connect the phone in Download mode (Vol. Down + Home + Power)</p>
-<p class="text">Go to Heimdall Suite/Drivers & open 'zadig' (Run in admin mode)</p>
-<p class="text">Select 'List All Devices' under 'Options'</p>
-<p class="text">Select 'Gadget Serial' & 'libusb0 (v1.2.5.0)' from the drop menu & scroll menu respectively</p>
-<p class="text">Click on Install/Replace Driver</p>
-<p class="text">Close 'zadig'</p>
-<p class="text">Reboot again into Download mode</p>
-<p class="text">Open 'heimdall-frontend'</p>
-<p class="text">Select 'Utilities' tab & click on 'Detect' under 'Detect Device' option</p>
-<p class="text">Make sure the 'Output' window says 'Device Detected'</p>
-<p class="text">Scroll down to 'Download PIT' section & click on 'Save As...' under 'Destination File'</p>
-<p class="text">Type any name under 'Name:' and select 'Save'. Do not give any filename extensions</p>
-<p class="text">Click on 'Download'</p>
-<p class="text">Reboot again into Download mode</p>
-<p class="text">Select 'Flash' tab</p>
-<p class="text">Load the downloaded pit under 'PIT'. Do not select 'Repartition' checkbox</p>
-<p class="text">Click the 'Add' button under 'Partitions (Files)'</p>
-<p class="text">Select 'RECOVERY' from the drop down menu in 'Partition Name' under 'Partition Details'. Make sure 'Partition ID' reads 7</p>
-<p class="text">Download the latest TWRP file from the download link above</p>
-<p class="text">Load the img image under 'File'</p>
-<p class="text">Now click on 'Start'</p>
-<p class="text">The image will get flashed in '/dev/block/mmcblk0p6' partition under mountpoint '/recovery'</p>
-<p class="text">Device will automatically restart when flashing is complete</p>
-</html>
+---
+layout: device
+title: "Samsung Galaxy S2 i9100"
+codename: i9100
+downloadfolder: i9100
+supportstatus: Currently Supported via IsoRec
+maintainer: arnab
+oem: Samsung
+ddof: "/dev/block/mmcblk0p6"
+xdathread: "http://forum.xda-developers.com/galaxy-s2/development-derivatives/recovery-twrp-3-0-0-0-t3330457"
+devicetree: "https://github.com/TeamWin/android_device_samsung_i9100"
+---
+
+{% include disclaimer.html %}
+
+{% include supportstatus.html %}
+
+NOTE: The i9100 does not support a separately bootable recovery partition. To install and use TWRP, you will need to install a custom kernel or boot image that supports IsoRec. You can find out more about IsoRec [here](http://forum.xda-developers.com/galaxy-s2/orig-development/isorec-isolated-recovery-galaxy-s2-t3291176).
+
+{% include download.html %}
+
+{% include twrpinstall.html %}
+
+<html>
+<div class='page-heading'>Flash via HeimdallSuite (Windows only):</div>
+<a id='heimdall'></a>
+<hr />
+<p class="text">Download HeimdallSuite & Samsung USB Drivers</p>
+<p class="text">Install Samsung USB Drivers</p>
+<p class="text">Connect the phone in Download mode (Vol. Down + Home + Power)</p>
+<p class="text">Go to Heimdall Suite/Drivers & open 'zadig' (Run in admin mode)</p>
+<p class="text">Select 'List All Devices' under 'Options'</p>
+<p class="text">Select 'Gadget Serial' & 'libusb0 (v1.2.5.0)' from the drop menu & scroll menu respectively</p>
+<p class="text">Click on Install/Replace Driver</p>
+<p class="text">Close 'zadig'</p>
+<p class="text">Reboot again into Download mode</p>
+<p class="text">Open 'heimdall-frontend'</p>
+<p class="text">Select 'Utilities' tab & click on 'Detect' under 'Detect Device' option</p>
+<p class="text">Make sure the 'Output' window says 'Device Detected'</p>
+<p class="text">Scroll down to 'Download PIT' section & click on 'Save As...' under 'Destination File'</p>
+<p class="text">Type any name under 'Name:' and select 'Save'. Do not give any filename extensions</p>
+<p class="text">Click on 'Download'</p>
+<p class="text">Reboot again into Download mode</p>
+<p class="text">Select 'Flash' tab</p>
+<p class="text">Load the downloaded pit under 'PIT'. Do not select 'Repartition' checkbox</p>
+<p class="text">Click the 'Add' button under 'Partitions (Files)'</p>
+<p class="text">Select 'RECOVERY' from the drop down menu in 'Partition Name' under 'Partition Details'. Make sure 'Partition ID' reads 7</p>
+<p class="text">Download the latest TWRP file from the download link above</p>
+<p class="text">Load the img image under 'File'</p>
+<p class="text">Now click on 'Start'</p>
+<p class="text">The image will get flashed in '/dev/block/mmcblk0p6' partition under mountpoint '/recovery'</p>
+<p class="text">Device will automatically restart when flashing is complete</p>
+</html>