Revert "Revert "Added qcom bluetooth init script""
This reverts commit 0d185ae25af28070ce438befdd68a83604e97687.
diff --git a/device.mk b/device.mk
index 539e3de..3d3296d 100644
--- a/device.mk
+++ b/device.mk
@@ -138,6 +138,7 @@
init.mdm.sh \
init.qcom.audio.sh \
init.qcom.bms.sh \
+ init.qcom.bt.sh \
init.qcom.class_core.sh \
init.qcom.early_boot.sh \
init.qcom.factory.sh \
diff --git a/rootdir/Android.mk b/rootdir/Android.mk
index 9e7b259..de7d5a4 100644
--- a/rootdir/Android.mk
+++ b/rootdir/Android.mk
@@ -141,7 +141,7 @@
LOCAL_MODULE_TAGS := optional eng
LOCAL_MODULE_CLASS := ETC
LOCAL_SRC_FILES := etc/$(LOCAL_MODULE)
-LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
+LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)/etc
include $(BUILD_PREBUILT)
######################
@@ -211,7 +211,17 @@
LOCAL_MODULE_TAGS := optional eng
LOCAL_MODULE_CLASS := ETC
LOCAL_SRC_FILES := ../recovery/$(LOCAL_MODULE)
-LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT)/etc
+LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)/etc
+include $(BUILD_PREBUILT)
+
+######################
+### init.qcom.bt.sh
+include $(CLEAR_VARS)
+LOCAL_MODULE := init.qcom.bt.sh
+LOCAL_MODULE_TAGS := optional eng
+LOCAL_MODULE_CLASS := ETC
+LOCAL_SRC_FILES := etc/$(LOCAL_MODULE)
+LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)/etc
include $(BUILD_PREBUILT)
######################
diff --git a/rootdir/etc/init.qcom.bt.sh b/rootdir/etc/init.qcom.bt.sh
new file mode 100644
index 0000000..1a9f031
--- /dev/null
+++ b/rootdir/etc/init.qcom.bt.sh
@@ -0,0 +1,357 @@
+#!/system/bin/sh
+# Copyright (c) 2009-2013, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# * Neither the name of The Linux Foundation nor
+# the names of its contributors may be used to endorse or promote
+# products derived from this software without specific prior written
+# permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#Read the arguments passed to the script
+config="$1"
+
+BLUETOOTH_SLEEP_PATH=/proc/bluetooth/sleep/proto
+LOG_TAG="qcom-bluetooth"
+LOG_NAME="${0}:"
+
+hciattach_pid=""
+
+loge ()
+{
+ /system/bin/log -t $LOG_TAG -p e "$LOG_NAME $@"
+}
+
+logi ()
+{
+ /system/bin/log -t $LOG_TAG -p i "$LOG_NAME $@"
+}
+
+failed ()
+{
+ loge "$1: exit code $2"
+ exit $2
+}
+
+program_bdaddr ()
+{
+ /system/bin/btnvtool -O
+ logi "Bluetooth Address programmed successfully"
+}
+
+#
+# enable bluetooth profiles dynamically
+#
+config_bt ()
+{
+ baseband=`getprop ro.baseband`
+ target=`getprop ro.board.platform`
+ if [ -f /sys/devices/soc0/soc_id ]; then
+ soc_hwid=`cat /sys/devices/soc0/soc_id`
+ else
+ soc_hwid=`cat /sys/devices/system/soc/soc0/id`
+ fi
+ btsoc=`getprop qcom.bluetooth.soc`
+
+ case $baseband in
+ "apq")
+ setprop ro.qualcomm.bluetooth.opp true
+ setprop ro.qualcomm.bluetooth.ftp true
+ setprop ro.qualcomm.bluetooth.nap false
+ setprop ro.bluetooth.sap false
+ setprop ro.bluetooth.dun false
+ # For MPQ as baseband is same for both
+ case $soc_hwid in
+ "130")
+ setprop ro.qualcomm.bluetooth.hsp true
+ setprop ro.qualcomm.bluetooth.hfp true
+ setprop ro.qualcomm.bluetooth.pbap false
+ setprop ro.qualcomm.bluetooth.map false
+ ;;
+ *)
+ setprop ro.qualcomm.bluetooth.hsp false
+ setprop ro.qualcomm.bluetooth.hfp false
+ setprop ro.qualcomm.bluetooth.pbap true
+ setprop ro.qualcomm.bluetooth.map true
+ ;;
+ esac
+ ;;
+ "mdm" | "svlte2a" | "svlte1" | "csfb")
+ setprop ro.qualcomm.bluetooth.opp true
+ setprop ro.qualcomm.bluetooth.hfp true
+ setprop ro.qualcomm.bluetooth.hsp true
+ setprop ro.qualcomm.bluetooth.pbap true
+ setprop ro.qualcomm.bluetooth.ftp true
+ setprop ro.qualcomm.bluetooth.map true
+ setprop ro.qualcomm.bluetooth.nap true
+ setprop ro.bluetooth.sap true
+ case $target in
+ "apq8084")
+ setprop ro.bluetooth.dun true
+ logi "Enabling BT-DUN for APQ8084"
+ ;;
+ *)
+ setprop ro.bluetooth.dun false
+ ;;
+ esac
+ ;;
+ "msm")
+ setprop ro.qualcomm.bluetooth.opp true
+ setprop ro.qualcomm.bluetooth.hfp true
+ setprop ro.qualcomm.bluetooth.hsp true
+ setprop ro.qualcomm.bluetooth.pbap true
+ setprop ro.qualcomm.bluetooth.ftp true
+ setprop ro.qualcomm.bluetooth.nap true
+ setprop ro.bluetooth.sap true
+ setprop ro.bluetooth.dun true
+ case $btsoc in
+ "ath3k")
+ setprop ro.qualcomm.bluetooth.map false
+ ;;
+ *)
+ setprop ro.qualcomm.bluetooth.map true
+ ;;
+ esac
+ ;;
+ *)
+ setprop ro.qualcomm.bluetooth.opp true
+ setprop ro.qualcomm.bluetooth.hfp true
+ setprop ro.qualcomm.bluetooth.hsp true
+ setprop ro.qualcomm.bluetooth.pbap true
+ setprop ro.qualcomm.bluetooth.ftp true
+ setprop ro.qualcomm.bluetooth.map true
+ setprop ro.qualcomm.bluetooth.nap true
+ setprop ro.bluetooth.sap true
+ setprop ro.bluetooth.dun true
+ ;;
+ esac
+
+ #Enable Bluetooth Profiles specific to target Dynamically
+ case $target in
+ "msm8960")
+ if [ "$btsoc" != "ath3k" ] && [ "$soc_hwid" != "130" ]
+ then
+ setprop ro.bluetooth.hfp.ver 1.6
+ setprop ro.qualcomm.bt.hci_transport smd
+ fi
+ ;;
+ "msm8974" | "msm8226" | "msm8610" | "msm8916" | "msm8909" )
+ if [ "$btsoc" != "ath3k" ]
+ then
+ setprop ro.bluetooth.hfp.ver 1.6
+ setprop ro.qualcomm.bt.hci_transport smd
+ fi
+ ;;
+ "apq8084" | "mpq8092" | "msm8994" )
+ if [ "$btsoc" != "rome" ]
+ then
+ setprop ro.qualcomm.bt.hci_transport smd
+ elif [ "$btsoc" = "rome" ]
+ then
+ setprop ro.bluetooth.hfp.ver 1.6
+ fi
+ ;;
+ *)
+ ;;
+ esac
+
+if [ -f /system/etc/bluetooth/stack.conf ]; then
+stack=`cat /system/etc/bluetooth/stack.conf`
+fi
+
+case "$stack" in
+ "bluez")
+ logi "Bluetooth stack is $stack"
+ setprop ro.qc.bluetooth.stack $stack
+ reason=`getprop vold.decrypt`
+ case "$reason" in
+ "trigger_restart_framework")
+ start dbus
+ ;;
+ esac
+ ;;
+ *)
+ logi "Bluetooth stack is Bluedroid"
+ ;;
+esac
+
+}
+
+start_hciattach ()
+{
+ /system/bin/hciattach -n $BTS_DEVICE $BTS_TYPE $BTS_BAUD &
+ hciattach_pid=$!
+ logi "start_hciattach: pid = $hciattach_pid"
+ echo 1 > $BLUETOOTH_SLEEP_PATH
+}
+
+kill_hciattach ()
+{
+ echo 0 > $BLUETOOTH_SLEEP_PATH
+ logi "kill_hciattach: pid = $hciattach_pid"
+ ## careful not to kill zero or null!
+ kill -TERM $hciattach_pid
+ # this shell doesn't exit now -- wait returns for normal exit
+}
+
+logi "init.qcom.bt.sh config = $config"
+case "$config" in
+ "onboot")
+ program_bdaddr
+ config_bt
+ exit 0
+ ;;
+ *)
+ ;;
+esac
+
+# mimic hciattach options parsing -- maybe a waste of effort
+USAGE="hciattach [-n] [-p] [-b] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow] [bdaddr]"
+
+while getopts "blnpt:s:" f
+do
+ case $f in
+ b | l | n | p) opt_flags="$opt_flags -$f" ;;
+ t) timeout=$OPTARG;;
+ s) initial_speed=$OPTARG;;
+ \?) echo $USAGE; exit 1;;
+ esac
+done
+shift $(($OPTIND-1))
+
+# Note that "hci_qcomm_init -e" prints expressions to set the shell variables
+# BTS_DEVICE, BTS_TYPE, BTS_BAUD, and BTS_ADDRESS.
+
+#Selectively Disable sleep
+BOARD=`getprop ro.board.platform`
+STACK=`getprop ro.qc.bluetooth.stack`
+
+# BR/EDR & LE power class configurations
+POWER_CLASS=`getprop qcom.bt.dev_power_class`
+LE_POWER_CLASS=`getprop qcom.bt.le_dev_pwr_class`
+
+# BR/EDR RF power backoff
+POWER_BACKOFF=`getprop qcom.bt.dev_power_backoff`
+
+#find the transport type
+TRANSPORT=`getprop ro.qualcomm.bt.hci_transport`
+logi "Transport : $TRANSPORT"
+case $STACK in
+ "bluez")
+ logi "** Bluez stack **"
+ ;;
+ *)
+ logi "** Bluedroid stack **"
+ setprop bluetooth.status off
+ ;;
+esac
+
+
+case $POWER_CLASS in
+ 1) PWR_CLASS="-p 0" ;
+ logi "Power Class: 1";;
+ 2) PWR_CLASS="-p 1" ;
+ logi "Power Class: 2";;
+ 3) PWR_CLASS="-p 2" ;
+ logi "Power Class: CUSTOM";;
+ *) PWR_CLASS="";
+ logi "Power Class: Ignored. Default(1) used (1-CLASS1/2-CLASS2/3-CUSTOM)";
+ logi "Power Class: To override, Before turning BT ON; setprop qcom.bt.dev_power_class <1 or 2 or 3>";;
+esac
+
+case $LE_POWER_CLASS in
+ 1) LE_PWR_CLASS="-P 0" ;
+ logi "LE Power Class: 1";;
+ 2) LE_PWR_CLASS="-P 1" ;
+ logi "LE Power Class: 2";;
+ 3) LE_PWR_CLASS="-P 2" ;
+ logi "LE Power Class: CUSTOM";;
+ *) LE_PWR_CLASS="-P 1";
+ logi "LE Power Class: Ignored. Default(2) used (1-CLASS1/2-CLASS2/3-CUSTOM)";
+ logi "LE Power Class: To override, Before turning BT ON; setprop qcom.bt.le_dev_pwr_class <1 or 2 or 3>";;
+esac
+
+case $POWER_BACKOFF in
+ 0) POWER_BACKOFF="-k 0" ;
+ logi "Power Backoff: 0";;
+ 1) POWER_BACKOFF="-k 1" ;
+ logi "Power Backoff: 1";;
+ 2) POWER_BACKOFF="-k 2" ;
+ logi "Power Backoff: 2";;
+ 3) POWER_BACKOFF="-k 3" ;
+ logi "Power Backoff: 3";;
+ *) POWER_BACKOFF="";
+ logi "Power Backoff: Ignored. Configuration in source code will be used";
+esac
+
+eval $(/system/bin/hci_qcomm_init -e $PWR_CLASS $LE_PWR_CLASS $POWER_BACKOFF && echo "exit_code_hci_qcomm_init=0" || echo "exit_code_hci_qcomm_init=1")
+
+case $exit_code_hci_qcomm_init in
+ 0) logi "Bluetooth QSoC firmware download succeeded, $BTS_DEVICE $BTS_TYPE $BTS_BAUD $BTS_ADDRESS";;
+ *) failed "Bluetooth QSoC firmware download failed" $exit_code_hci_qcomm_init;
+ case $STACK in
+ "bluez")
+ logi "** Bluez stack **"
+ ;;
+ *)
+ logi "** Bluedroid stack **"
+ setprop bluetooth.status off
+ ;;
+ esac
+
+ exit $exit_code_hci_qcomm_init;;
+esac
+
+# init does SIGTERM on ctl.stop for service
+trap "kill_hciattach" TERM INT
+
+case $TRANSPORT in
+ "smd")
+ case $STACK in
+ "bluez")
+ logi "** Bluez stack **"
+ echo 1 > /sys/module/hci_smd/parameters/hcismd_set
+ ;;
+ *)
+ logi "** Bluedroid stack **"
+ setprop bluetooth.status on
+ ;;
+ esac
+ ;;
+ *)
+ logi "start hciattach"
+ start_hciattach
+ case $STACK in
+ "bluez")
+ logi "Bluetooth is turning On with Bluez stack "
+ ;;
+ *)
+ logi "** Bluedroid stack **"
+ setprop bluetooth.status on
+ ;;
+ esac
+
+ wait $hciattach_pid
+ logi "Bluetooth stopped"
+ ;;
+esac
+
+exit 0