diff --git a/recovery/init.qcom.early_boot.sh b/recovery/init.qcom.early_boot.sh
new file mode 100755
index 0000000..a8bcf09
--- /dev/null
+++ b/recovery/init.qcom.early_boot.sh
@@ -0,0 +1,200 @@
+#!/system/bin/sh
+# Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of The Linux Foundation nor
+#       the names of its contributors may be used to endorse or promote
+#       products derived from this software without specific prior written
+#       permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+export PATH=/system/bin
+
+# Set platform variables
+if [ -f /sys/devices/soc0/hw_platform ]; then
+    soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null
+else
+    soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null
+fi
+if [ -f /sys/devices/soc0/soc_id ]; then
+    soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null
+else
+    soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null
+fi
+if [ -f /sys/devices/soc0/platform_version ]; then
+    soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null
+else
+    soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null
+fi
+
+log -t BOOT -p i "MSM target '$1', SoC '$soc_hwplatform', HwID '$soc_hwid', SoC ver '$soc_hwver'"
+
+case "$1" in
+    "msm7630_surf" | "msm7630_1x" | "msm7630_fusion")
+        case "$soc_hwplatform" in
+            "FFA" | "SVLTE_FFA")
+                # linking to surf_keypad_qwerty.kcm.bin instead of surf_keypad_numeric.kcm.bin so that
+                # the UI keyboard works fine.
+                ln -s  /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin
+                ;;
+            "Fluid")
+                setprop ro.sf.lcd_density 240
+                setprop qcom.bt.dev_power_class 2
+                ;;
+            *)
+                ln -s  /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin
+                ;;
+        esac
+        ;;
+
+    "msm8660")
+        case "$soc_hwplatform" in
+            "Fluid")
+                setprop ro.sf.lcd_density 240
+                ;;
+            "Dragon")
+                setprop ro.sound.alsa "WM8903"
+                ;;
+        esac
+        ;;
+
+    "msm8960")
+        # lcd density is write-once. Hence the separate switch case
+        case "$soc_hwplatform" in
+            "Liquid")
+                if [ "$soc_hwver" == "196608" ]; then # version 0x30000 is 3D sku
+                    setprop ro.sf.hwrotation 90
+                fi
+
+                setprop ro.sf.lcd_density 160
+                ;;
+            "MTP")
+                setprop ro.sf.lcd_density 240
+                ;;
+            *)
+                case "$soc_hwid" in
+                    "109")
+                        setprop ro.sf.lcd_density 160
+                        ;;
+                    *)
+                        setprop ro.sf.lcd_density 240
+                        ;;
+                esac
+            ;;
+        esac
+
+        #Set up composition type based on the target
+        case "$soc_hwid" in
+            87)
+                #8960
+                setprop debug.composition.type dyn
+                ;;
+            153|154|155|156|157|138)
+                #8064 V2 PRIME | 8930AB | 8630AB | 8230AB | 8030AB | 8960AB
+                setprop debug.composition.type c2d
+                ;;
+            *)
+        esac
+        ;;
+
+    "msm8974")
+        case "$soc_hwplatform" in
+            "Liquid")
+                setprop ro.sf.lcd_density 160
+                # Liquid do not have hardware navigation keys, so enable
+                # Android sw navigation bar
+                setprop ro.hw.nav_keys 0
+                ;;
+            "Dragon")
+                setprop ro.sf.lcd_density 240
+                ;;
+            *)
+                setprop ro.sf.lcd_density 320
+                ;;
+        esac
+        ;;
+
+    "msm8226")
+        case "$soc_hwplatform" in
+            *)
+                setprop ro.sf.lcd_density 320
+                ;;
+        esac
+        ;;
+
+    "msm8610" | "apq8084" | "mpq8092")
+        case "$soc_hwplatform" in
+            *)
+                setprop ro.sf.lcd_density 240
+                ;;
+        esac
+        ;;
+    "apq8084")
+        case "$soc_hwplatform" in
+            "Liquid")
+                setprop ro.sf.lcd_density 320
+                # Liquid do not have hardware navigation keys, so enable
+                # Android sw navigation bar
+                setprop ro.hw.nav_keys 0
+                ;;
+            "SBC")
+                setprop ro.sf.lcd_density 200
+                # SBC do not have hardware navigation keys, so enable
+                # Android sw navigation bar
+                setprop qemu.hw.mainkeys 0
+                ;;
+            *)
+                setprop ro.sf.lcd_density 480
+                ;;
+        esac
+        ;;
+esac
+
+# Setup HDMI related nodes & permissions
+# HDMI can be fb1 or fb2
+# Loop through the sysfs nodes and determine
+# the HDMI(dtv panel)
+for fb_cnt in 0 1 2
+do
+file=/sys/class/graphics/fb$fb_cnt
+dev_file=/dev/graphics/fb$fb_cnt
+  if [ -d "$file" ]
+  then
+    value=`cat $file/msm_fb_type`
+    case "$value" in
+            "dtv panel")
+        chown -h system.graphics $file/hpd
+        chown -h system.system $file/hdcp/tp
+        chown -h system.graphics $file/vendor_name
+        chown -h system.graphics $file/product_description
+        chmod -h 0664 $file/hpd
+        chmod -h 0664 $file/hdcp/tp
+        chmod -h 0664 $file/vendor_name
+        chmod -h 0664 $file/product_description
+        chmod -h 0664 $file/video_mode
+        chmod -h 0664 $file/format_3d
+        # create symbolic link
+        ln -s $dev_file /dev/graphics/hdmi
+        # Change owner and group for media server and surface flinger
+        chown -h system.system $file/format_3d;;
+    esac
+  fi
+done