diff --git a/rootdir/etc/init.qcom.post_boot.sh b/rootdir/etc/init.qcom.post_boot.sh
new file mode 100644
index 0000000..f01e105
--- /dev/null
+++ b/rootdir/etc/init.qcom.post_boot.sh
@@ -0,0 +1,1514 @@
+#!/system/bin/sh
+# Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of The Linux Foundation nor
+#       the names of its contributors may be used to endorse or promote
+#       products derived from this software without specific prior written
+#       permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+target=`getprop ro.board.platform`
+case "$target" in
+    "msm7201a_ffa" | "msm7201a_surf" | "msm7627_ffa" | "msm7627_6x" | "msm7627a"  | "msm7627_surf" | \
+    "qsd8250_surf" | "qsd8250_ffa" | "msm7630_surf" | "msm7630_1x" | "msm7630_fusion" | "qsd8650a_st1x")
+        echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+        echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
+        ;;
+esac
+
+case "$target" in
+    "msm7201a_ffa" | "msm7201a_surf")
+        echo 500000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+        ;;
+esac
+
+case "$target" in
+    "msm7630_surf" | "msm7630_1x" | "msm7630_fusion")
+        echo 75000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+        echo 1 > /sys/module/pm2/parameters/idle_sleep_mode
+        ;;
+esac
+
+case "$target" in
+     "msm7201a_ffa" | "msm7201a_surf" | "msm7627_ffa" | "msm7627_6x" | "msm7627_surf" | "msm7630_surf" | "msm7630_1x" | "msm7630_fusion" | "msm7627a" )
+        echo 245760 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        ;;
+esac
+
+case "$target" in
+    "msm8660")
+     echo 1 > /sys/module/rpm_resources/enable_low_power/L2_cache
+     echo 1 > /sys/module/rpm_resources/enable_low_power/pxo
+     echo 2 > /sys/module/rpm_resources/enable_low_power/vdd_dig
+     echo 2 > /sys/module/rpm_resources/enable_low_power/vdd_mem
+     echo 1 > /sys/module/rpm_resources/enable_low_power/rpm_cpu
+     echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled
+     echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled
+     echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled
+     echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled
+     echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled
+     echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/idle_enabled
+     echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled
+     echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled
+     echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+     echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
+     echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+     echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
+     echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy
+     echo 4 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
+     echo 384000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+     echo 384000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq
+     chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
+     chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+     chown -h system /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq
+     chown -h system /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq
+     chown -h root.system /sys/devices/system/cpu/mfreq
+     chmod -h 220 /sys/devices/system/cpu/mfreq
+     chown -h root.system /sys/devices/system/cpu/cpu1/online
+     chmod -h 664 /sys/devices/system/cpu/cpu1/online
+        ;;
+esac
+
+case "$target" in
+    "msm8960")
+         echo 1 > /sys/module/rpm_resources/enable_low_power/L2_cache
+         echo 1 > /sys/module/rpm_resources/enable_low_power/pxo
+         echo 1 > /sys/module/rpm_resources/enable_low_power/vdd_dig
+         echo 1 > /sys/module/rpm_resources/enable_low_power/vdd_mem
+         echo 1 > /sys/module/msm_pm/modes/cpu0/retention/idle_enabled
+         echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled
+         echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled
+         echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/suspend_enabled
+         echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/suspend_enabled
+         echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled
+         echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled
+         echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/suspend_enabled
+         echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/suspend_enabled
+         echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled
+         echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled
+         echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/idle_enabled
+         echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/idle_enabled
+         echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled
+	 echo 0 > /sys/module/msm_thermal/core_control/enabled
+         echo 1 > /sys/devices/system/cpu/cpu1/online
+         echo 1 > /sys/devices/system/cpu/cpu2/online
+         echo 1 > /sys/devices/system/cpu/cpu3/online
+         echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+         echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
+         echo "ondemand" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
+         echo "ondemand" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor
+         echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+         echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
+         echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy
+         echo 4 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
+         echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential
+         echo 70 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_multi_core
+         echo 3 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential_multi_core
+         echo 918000 > /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq
+         echo 1026000 > /sys/devices/system/cpu/cpufreq/ondemand/sync_freq
+         echo 80 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_any_cpu_load
+         chown -h system /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+         chown -h system /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
+         chown -h system /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy
+         echo 384000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+         echo 384000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq
+         echo 384000 > /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq
+         echo 384000 > /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq
+         chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
+         chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+         chown -h system /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq
+         chown -h system /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq
+         chown -h system /sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq
+         chown -h system /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq
+         chown -h system /sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq
+         chown -h system /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq
+	 echo 1 > /sys/module/msm_thermal/core_control/enabled
+         chown -h root.system /sys/devices/system/cpu/mfreq
+         chmod -h 220 /sys/devices/system/cpu/mfreq
+         chown -h root.system /sys/devices/system/cpu/cpu1/online
+         chown -h root.system /sys/devices/system/cpu/cpu2/online
+         chown -h root.system /sys/devices/system/cpu/cpu3/online
+         chmod -h 664 /sys/devices/system/cpu/cpu1/online
+         chmod -h 664 /sys/devices/system/cpu/cpu2/online
+         chmod -h 664 /sys/devices/system/cpu/cpu3/online
+         # set DCVS parameters for CPU
+         echo 40000 > /sys/module/msm_dcvs/cores/cpu0/slack_time_max_us
+         echo 40000 > /sys/module/msm_dcvs/cores/cpu0/slack_time_min_us
+         echo 100000 > /sys/module/msm_dcvs/cores/cpu0/em_win_size_min_us
+         echo 500000 > /sys/module/msm_dcvs/cores/cpu0/em_win_size_max_us
+         echo 0 > /sys/module/msm_dcvs/cores/cpu0/slack_mode_dynamic
+         echo 1000000 > /sys/module/msm_dcvs/cores/cpu0/disable_pc_threshold
+         echo 25000 > /sys/module/msm_dcvs/cores/cpu1/slack_time_max_us
+         echo 25000 > /sys/module/msm_dcvs/cores/cpu1/slack_time_min_us
+         echo 100000 > /sys/module/msm_dcvs/cores/cpu1/em_win_size_min_us
+         echo 500000 > /sys/module/msm_dcvs/cores/cpu1/em_win_size_max_us
+         echo 0 > /sys/module/msm_dcvs/cores/cpu1/slack_mode_dynamic
+         echo 1000000 > /sys/module/msm_dcvs/cores/cpu1/disable_pc_threshold
+         echo 25000 > /sys/module/msm_dcvs/cores/cpu2/slack_time_max_us
+         echo 25000 > /sys/module/msm_dcvs/cores/cpu2/slack_time_min_us
+         echo 100000 > /sys/module/msm_dcvs/cores/cpu2/em_win_size_min_us
+         echo 500000 > /sys/module/msm_dcvs/cores/cpu2/em_win_size_max_us
+         echo 0 > /sys/module/msm_dcvs/cores/cpu2/slack_mode_dynamic
+         echo 1000000 > /sys/module/msm_dcvs/cores/cpu2/disable_pc_threshold
+         echo 25000 > /sys/module/msm_dcvs/cores/cpu3/slack_time_max_us
+         echo 25000 > /sys/module/msm_dcvs/cores/cpu3/slack_time_min_us
+         echo 100000 > /sys/module/msm_dcvs/cores/cpu3/em_win_size_min_us
+         echo 500000 > /sys/module/msm_dcvs/cores/cpu3/em_win_size_max_us
+         echo 0 > /sys/module/msm_dcvs/cores/cpu3/slack_mode_dynamic
+         echo 1000000 > /sys/module/msm_dcvs/cores/cpu3/disable_pc_threshold
+         # set DCVS parameters for GPU
+         echo 20000 > /sys/module/msm_dcvs/cores/gpu0/slack_time_max_us
+         echo 20000 > /sys/module/msm_dcvs/cores/gpu0/slack_time_min_us
+         echo 0 > /sys/module/msm_dcvs/cores/gpu0/slack_mode_dynamic
+         # set msm_mpdecision parameters
+         echo 45000 > /sys/module/msm_mpdecision/slack_time_max_us
+         echo 15000 > /sys/module/msm_mpdecision/slack_time_min_us
+         echo 100000 > /sys/module/msm_mpdecision/em_win_size_min_us
+         echo 1000000 > /sys/module/msm_mpdecision/em_win_size_max_us
+         echo 3 > /sys/module/msm_mpdecision/online_util_pct_min
+         echo 25 > /sys/module/msm_mpdecision/online_util_pct_max
+         echo 97 > /sys/module/msm_mpdecision/em_max_util_pct
+         echo 2 > /sys/module/msm_mpdecision/rq_avg_poll_ms
+         echo 10 > /sys/module/msm_mpdecision/mp_em_rounding_point_min
+         echo 85 > /sys/module/msm_mpdecision/mp_em_rounding_point_max
+         echo 50 > /sys/module/msm_mpdecision/iowait_threshold_pct
+         #set permissions for the nodes needed by display on/off hook
+         chown -h system /sys/module/msm_dcvs/cores/cpu0/slack_time_max_us
+         chown -h system /sys/module/msm_dcvs/cores/cpu0/slack_time_min_us
+         chown -h system /sys/module/msm_mpdecision/slack_time_max_us
+         chown -h system /sys/module/msm_mpdecision/slack_time_min_us
+         chmod -h 664 /sys/module/msm_dcvs/cores/cpu0/slack_time_max_us
+         chmod -h 664 /sys/module/msm_dcvs/cores/cpu0/slack_time_min_us
+         chmod -h 664 /sys/module/msm_mpdecision/slack_time_max_us
+         chmod -h 664 /sys/module/msm_mpdecision/slack_time_min_us
+         if [ -f /sys/devices/soc0/soc_id ]; then
+             soc_id=`cat /sys/devices/soc0/soc_id`
+         else
+             soc_id=`cat /sys/devices/system/soc/soc0/id`
+         fi
+         case "$soc_id" in
+             "130")
+                 echo 230 > /sys/class/gpio/export
+                 echo 228 > /sys/class/gpio/export
+                 echo 229 > /sys/class/gpio/export
+                 echo "in" > /sys/class/gpio/gpio230/direction
+                 echo "rising" > /sys/class/gpio/gpio230/edge
+                 echo "in" > /sys/class/gpio/gpio228/direction
+                 echo "rising" > /sys/class/gpio/gpio228/edge
+                 echo "in" > /sys/class/gpio/gpio229/direction
+                 echo "rising" > /sys/class/gpio/gpio229/edge
+                 echo 253 > /sys/class/gpio/export
+                 echo 254 > /sys/class/gpio/export
+                 echo 257 > /sys/class/gpio/export
+                 echo 258 > /sys/class/gpio/export
+                 echo 259 > /sys/class/gpio/export
+                 echo "out" > /sys/class/gpio/gpio253/direction
+                 echo "out" > /sys/class/gpio/gpio254/direction
+                 echo "out" > /sys/class/gpio/gpio257/direction
+                 echo "out" > /sys/class/gpio/gpio258/direction
+                 echo "out" > /sys/class/gpio/gpio259/direction
+                 chown -h media /sys/class/gpio/gpio253/value
+                 chown -h media /sys/class/gpio/gpio254/value
+                 chown -h media /sys/class/gpio/gpio257/value
+                 chown -h media /sys/class/gpio/gpio258/value
+                 chown -h media /sys/class/gpio/gpio259/value
+                 chown -h media /sys/class/gpio/gpio253/direction
+                 chown -h media /sys/class/gpio/gpio254/direction
+                 chown -h media /sys/class/gpio/gpio257/direction
+                 chown -h media /sys/class/gpio/gpio258/direction
+                 chown -h media /sys/class/gpio/gpio259/direction
+                 echo 0 > /sys/module/rpm_resources/enable_low_power/vdd_dig
+                 echo 0 > /sys/module/rpm_resources/enable_low_power/vdd_mem
+                 ;;
+         esac
+         ;;
+esac
+
+case "$target" in
+    "msm8974")
+        echo 4 > /sys/module/lpm_levels/enable_low_power/l2
+        echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/retention/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/retention/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/retention/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/retention/idle_enabled
+        echo 0 > /sys/module/msm_thermal/core_control/enabled
+        echo 1 > /sys/devices/system/cpu/cpu1/online
+        echo 1 > /sys/devices/system/cpu/cpu2/online
+        echo 1 > /sys/devices/system/cpu/cpu3/online
+        if [ -f /sys/devices/soc0/soc_id ]; then
+            soc_id=`cat /sys/devices/soc0/soc_id`
+        else
+            soc_id=`cat /sys/devices/system/soc/soc0/id`
+        fi
+        case "$soc_id" in
+            "208" | "211" | "214" | "217" | "209" | "212" | "215" | "218" | "194" | "210" | "213" | "216")
+                for devfreq_gov in /sys/class/devfreq/qcom,cpubw*/governor
+                do
+                    echo "cpubw_hwmon" > $devfreq_gov
+                done
+                echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+                echo "interactive" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
+                echo "interactive" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
+                echo "interactive" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor
+                echo "20000 1400000:40000 1700000:20000" > /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay
+                echo 90 > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load
+                echo 1190400 > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq
+                echo 1 > /sys/devices/system/cpu/cpufreq/interactive/io_is_busy
+                echo "85 1500000:90 1800000:70" > /sys/devices/system/cpu/cpufreq/interactive/target_loads
+                echo 40000 > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time
+                echo 20 > /sys/module/cpu_boost/parameters/boost_ms
+                echo 1728000 > /sys/module/cpu_boost/parameters/sync_threshold
+                echo 100000 > /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor
+                echo 1497600 > /sys/module/cpu_boost/parameters/input_boost_freq
+                echo 40 > /sys/module/cpu_boost/parameters/input_boost_ms
+                setprop ro.qualcomm.perf.cores_online 2
+            ;;
+            *)
+                echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+                echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
+                echo "ondemand" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
+                echo "ondemand" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor
+                echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+                echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
+                echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy
+                echo 2 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
+                echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential
+                echo 70 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_multi_core
+                echo 3 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential_multi_core
+                echo 960000 > /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq
+                echo 960000 > /sys/devices/system/cpu/cpufreq/ondemand/sync_freq
+                echo 1190400 > /sys/devices/system/cpu/cpufreq/ondemand/input_boost
+                echo 80 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_any_cpu_load
+            ;;
+        esac
+        echo 300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        echo 300000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq
+        echo 300000 > /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq
+        echo 300000 > /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq
+        chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
+        chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        echo 1 > /sys/module/msm_thermal/core_control/enabled
+        chown -h root.system /sys/devices/system/cpu/mfreq
+        chmod -h 220 /sys/devices/system/cpu/mfreq
+        chown -h root.system /sys/devices/system/cpu/cpu1/online
+        chown -h root.system /sys/devices/system/cpu/cpu2/online
+        chown -h root.system /sys/devices/system/cpu/cpu3/online
+        chmod -h 664 /sys/devices/system/cpu/cpu1/online
+        chmod -h 664 /sys/devices/system/cpu/cpu2/online
+        chmod -h 664 /sys/devices/system/cpu/cpu3/online
+        echo 1 > /dev/cpuctl/apps/cpu.notify_on_migrate
+    ;;
+esac
+
+case "$target" in
+    "msm8916")
+        # Change PM debug parameters permission
+        chown -h radio.system /sys/module/qpnp_power_on/parameters/reset_enabled
+        chown -h radio.system /sys/module/qpnp_power_on/parameters/wake_enabled
+        chown -h radio.system /sys/module/qpnp_int/parameters/debug_mask
+        chown -h radio.system /sys/module/lpm_levels/parameters/secdebug
+        chmod -h 664 /sys/module/qpnp_power_on/parameters/reset_enabled
+        chmod -h 664 /sys/module/qpnp_power_on/parameters/wake_enabled
+        chmod -h 664 /sys/module/qpnp_int/parameters/debug_mask
+        chmod -h 664 /sys/module/lpm_levels/parameters/secdebug
+        chmod -h 444 /sys/kernel/wakeup_reasons/last_resume_reason
+
+        if [ -f /sys/devices/soc0/soc_id ]; then
+            soc_id=`cat /sys/devices/soc0/soc_id`
+        else
+            soc_id=`cat /sys/devices/system/soc/soc0/id`
+        fi
+        case "$soc_id" in
+            "206" | "247" | "248" | "249" | "250")
+		echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled
+	        echo 1 > /sys/devices/system/cpu/cpu1/online
+		echo 1 > /sys/devices/system/cpu/cpu2/online
+	        echo 1 > /sys/devices/system/cpu/cpu3/online
+	    ;;
+            "239" | "241" | "263")
+               if [ -f /sys/devices/soc0/revision ]; then
+                   revision=`cat /sys/devices/soc0/revision`
+               else
+                   revision=`cat /sys/devices/system/soc/soc0/revision`
+               fi
+               case "$revision" in
+                   "3.0")
+                       echo N > /sys/module/lpm_levels/system/power/power-l2-gdhs/idle_enabled
+                       echo N > /sys/module/lpm_levels/system/performance/performance-l2-gdhs/idle_enabled
+                   ;;
+               esac
+               echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled
+               echo 10 > /sys/class/net/rmnet0/queues/rx-0/rps_cpus
+                if [ -f /sys/devices/soc0/platform_subtype_id ]; then
+                    platform_subtype_id=`cat /sys/devices/soc0/platform_subtype_id`
+                fi
+                if [ -f /sys/devices/soc0/hw_platform ]; then
+                    hw_platform=`cat /sys/devices/soc0/hw_platform`
+                fi
+                case "$soc_id" in
+                    "239")
+                    case "$hw_platform" in
+                        "Surf")
+                            case "$platform_subtype_id" in
+                                "1" | "2")
+                                    start hbtp
+                                ;;
+                            esac
+                        ;;
+                        "MTP")
+                            case "$platform_subtype_id" in
+                                "3")
+                                    start hbtp
+                                ;;
+                            esac
+                        ;;
+                    esac
+                    ;;
+                esac
+            ;;
+            "268" | "269" | "270" | "271")
+                echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled
+                echo 10 > /sys/class/net/rmnet0/queues/rx-0/rps_cpus
+            ;;
+             "233" | "240" | "242")
+		echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled
+	        echo 1 > /sys/devices/system/cpu/cpu1/online
+		echo 1 > /sys/devices/system/cpu/cpu2/online
+	        echo 1 > /sys/devices/system/cpu/cpu3/online
+	    ;;
+       esac
+
+	#control daemon for xosd
+	factory_mode=`getprop ro.factory.factory_binary`
+	if [ "$factory_mode" != "factory" ]; then
+		product_name=`getprop ro.product.name`
+		case "$product_name" in
+			a8*)
+				jig_mode=`cat /sys/class/sec/switch/attached_dev`
+				case "$jig_mode" in
+					"JIG UART ON" | "JIG UART OFF" | "JIG UART OFF/VB")
+						echo "PM: JIG UART" > /dev/kmsg
+					;;
+					*)
+						echo "PM: stop at_distributor" > /dev/kmsg
+						stop at_distributor
+					;;
+				esac
+			;;
+		esac
+	fi
+    ;;
+esac
+
+case "$target" in
+    "msm8226")
+        echo 4 > /sys/module/lpm_levels/enable_low_power/l2
+        echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/idle_enabled
+        echo 1 > /sys/devices/system/cpu/cpu1/online
+        echo 1 > /sys/devices/system/cpu/cpu2/online
+        echo 1 > /sys/devices/system/cpu/cpu3/online
+        echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+        echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+        echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
+        echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy
+        echo 2 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
+        echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential
+        echo 70 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_multi_core
+        echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential_multi_core
+        echo 787200 > /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq
+        echo 300000 > /sys/devices/system/cpu/cpufreq/ondemand/sync_freq
+        echo 80 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_any_cpu_load
+        echo 300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
+        chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        chown -h root.system /sys/devices/system/cpu/cpu1/online
+        chown -h root.system /sys/devices/system/cpu/cpu2/online
+        chown -h root.system /sys/devices/system/cpu/cpu3/online
+        chmod -h 664 /sys/devices/system/cpu/cpu1/online
+        chmod -h 664 /sys/devices/system/cpu/cpu2/online
+        chmod -h 664 /sys/devices/system/cpu/cpu3/online
+    ;;
+esac
+
+case "$target" in
+    "msm8610")
+        echo 4 > /sys/module/lpm_levels/enable_low_power/l2
+        echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/idle_enabled
+        echo 1 > /sys/devices/system/cpu/cpu1/online
+        echo 1 > /sys/devices/system/cpu/cpu2/online
+        echo 1 > /sys/devices/system/cpu/cpu3/online
+        echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+        echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+        echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
+        echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy
+        echo 2 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
+        echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential
+        echo 70 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_multi_core
+        echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential_multi_core
+        echo 787200 > /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq
+        echo 300000 > /sys/devices/system/cpu/cpufreq/ondemand/sync_freq
+        echo 80 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_any_cpu_load
+        echo 300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        setprop ro.qualcomm.perf.min_freq 7
+        echo 1 > /sys/kernel/mm/ksm/deferred_timer
+        chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
+        chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        chown -h root.system /sys/devices/system/cpu/cpu1/online
+        chown -h root.system /sys/devices/system/cpu/cpu2/online
+        chown -h root.system /sys/devices/system/cpu/cpu3/online
+        chmod -h 664 /sys/devices/system/cpu/cpu1/online
+        chmod -h 664 /sys/devices/system/cpu/cpu2/online
+        chmod -h 664 /sys/devices/system/cpu/cpu3/online
+    ;;
+esac
+
+case "$target" in
+    "msm8916")
+
+        if [ -f /sys/devices/soc0/soc_id ]; then
+           soc_id=`cat /sys/devices/soc0/soc_id`
+        else
+           soc_id=`cat /sys/devices/system/soc/soc0/id`
+        fi
+
+        #Enable adaptive LMK and set vmpressure_file_min
+        ProductName=`getprop ro.product.name`
+        if [ "$ProductName" == "msm8916_32" ] || [ "$ProductName" == "msm8916_32_LMT" ]; then
+            echo 1 > /sys/module/lowmemorykiller/parameters/enable_adaptive_lmk
+            echo 69253 > /sys/module/lowmemorykiller/parameters/vmpressure_file_min
+        elif [ "$ProductName" == "msm8916_64" ] || [ "$ProductName" == "msm8916_64_LMT" ]; then
+            echo 1 > /sys/module/lowmemorykiller/parameters/enable_adaptive_lmk
+            echo 81250 > /sys/module/lowmemorykiller/parameters/vmpressure_file_min
+        fi
+
+        # HMP scheduler settings for 8916, 8936, 8939, 8929
+        echo 3 > /proc/sys/kernel/sched_window_stats_policy
+
+        # Apply governor settings for 8916
+        case "$soc_id" in
+            "206" | "247" | "248" | "249" | "250")
+
+                # HMP scheduler load tracking settings
+                echo 3 > /proc/sys/kernel/sched_ravg_hist_size
+
+                # HMP Task packing settings for 8916
+                echo 30 > /proc/sys/kernel/sched_small_task
+                echo 50 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_load
+                echo 50 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_load
+                echo 50 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_load
+                echo 50 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_load
+                echo 3 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_nr_run
+                echo 3 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_nr_run
+                echo 3 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_nr_run
+                echo 3 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_nr_run
+
+                # disable thermal core_control to update scaling_min_freq
+                echo 0 > /sys/module/msm_thermal/core_control/enabled
+                echo 1 > /sys/devices/system/cpu/cpu0/online
+                echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+                chown -h system.system /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay
+                chown -h system.system /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load
+                chown -h system.system /sys/devices/system/cpu/cpufreq/interactive/timer_rate
+                chown -h system.system /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq
+                chown -h system.system /sys/devices/system/cpu/cpufreq/interactive/io_is_busy
+                chown -h system.system /sys/devices/system/cpu/cpufreq/interactive/target_loads
+                chown -h system.system /sys/devices/system/cpu/cpufreq/interactive/min_sample_time
+                chown -h system.system /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor
+                chown -h system.system /sys/class/devfreq/0.qcom,cpubw/min_freq
+                chown -h system.system /sys/class/devfreq/0.qcom,cpubw/max_freq
+                chmod -h 0660 /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay
+                chmod -h 0660 /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load
+                chmod -h 0660 /sys/devices/system/cpu/cpufreq/interactive/timer_rate
+                chmod -h 0660 /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq
+                chmod -h 0660 /sys/devices/system/cpu/cpufreq/interactive/io_is_busy
+                chmod -h 0660 /sys/devices/system/cpu/cpufreq/interactive/target_loads
+                chmod -h 0660 /sys/devices/system/cpu/cpufreq/interactive/min_sample_time
+                chmod -h 0660 /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor
+                chmod -h 0660 /sys/class/devfreq/0.qcom,cpubw/min_freq
+                chmod -h 0660 /sys/class/devfreq/0.qcom,cpubw/max_freq
+                echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+                # enable thermal core_control now
+                echo 1 > /sys/module/msm_thermal/core_control/enabled
+
+                echo "25000 1094400:50000" > /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay
+                echo 90 > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load
+                echo 25000 > /sys/devices/system/cpu/cpufreq/interactive/timer_rate
+                echo 998400 > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq
+                echo 0 > /sys/devices/system/cpu/cpufreq/interactive/io_is_busy
+                echo "1 800000:85 998400:90 1094400:80" > /sys/devices/system/cpu/cpufreq/interactive/target_loads
+                echo 50000 > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time
+                echo 50000 > /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor
+                echo 40 > /sys/class/kgsl/kgsl-3d0/idle_timer
+
+                # Bring up all cores online
+                echo 1 > /sys/devices/system/cpu/cpu1/online
+                echo 1 > /sys/devices/system/cpu/cpu2/online
+                echo 1 > /sys/devices/system/cpu/cpu3/online
+            ;;
+        esac
+
+	# Apply governor settings for 8936
+        case "$soc_id" in
+            "233" | "240" | "242")
+
+                # HMP scheduler load tracking settings
+                echo 3 > /proc/sys/kernel/sched_ravg_hist_size
+
+                # HMP Task packing settings for 8936
+                echo 50 > /proc/sys/kernel/sched_small_task
+                echo 50 > /proc/sys/kernel/sched_mostly_idle_load
+                echo 10 > /proc/sys/kernel/sched_mostly_idle_nr_run
+
+		# disable thermal core_control to update scaling_min_freq, interactive gov
+                echo 0 > /sys/module/msm_thermal/core_control/enabled
+		echo 1 > /sys/devices/system/cpu/cpu0/online
+                echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+                echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+                # enable thermal core_control now
+                echo 1 > /sys/module/msm_thermal/core_control/enabled
+
+                echo "25000 1113600:50000" > /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay
+                echo 90 > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load
+                echo 25000 > /sys/devices/system/cpu/cpufreq/interactive/timer_rate
+                echo 960000 > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq
+                echo 0 > /sys/devices/system/cpu/cpufreq/interactive/io_is_busy
+                echo "1 800000:85 1113600:90 1267200:80" > /sys/devices/system/cpu/cpufreq/interactive/target_loads
+                echo 50000 > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time
+                echo 50000 > /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor
+
+                # Bring up all cores online
+		echo 1 > /sys/devices/system/cpu/cpu1/online
+	        echo 1 > /sys/devices/system/cpu/cpu2/online
+	        echo 1 > /sys/devices/system/cpu/cpu3/online
+	        echo 1 > /sys/devices/system/cpu/cpu4/online
+
+		for gpu_bimc_io_percent in /sys/class/devfreq/qcom,gpubw*/bw_hwmon/io_percent
+		do
+			echo 40 > $gpu_bimc_io_percent
+		done
+
+            ;;
+        esac
+
+        # Apply governor settings for 8939
+        case "$soc_id" in
+            "239" | "241" | "263" | "268" | "269" | "270" | "271")
+                # disable thermal core_control for updating interactive gov settings
+                echo 0 > /sys/module/msm_thermal/core_control/enabled
+
+		# change sched_window_stats_policy same as KK version
+		echo 2 > /proc/sys/kernel/sched_window_stats_policy
+
+                # enable governor for perf cluster
+                echo 1 > /sys/devices/system/cpu/cpu0/online
+                echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+                # enable governor for power cluster
+                echo 1 >/sys/devices/system/cpu/cpu4/online
+                echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor
+
+                # HMP Task packing settings for 8939, 8929
+                echo 30 > /proc/sys/kernel/sched_small_task
+                echo 50 > /proc/sys/kernel/sched_mostly_idle_load
+                echo 3 > /proc/sys/kernel/sched_mostly_idle_nr_run
+
+		for devfreq_gov in /sys/class/devfreq/qcom,mincpubw*/governor
+		do
+			echo "cpufreq" > $devfreq_gov
+		done
+
+                if [ "$soc_id" == "0" ]; then
+                    for devfreq_gov in /sys/class/devfreq/qcom,cpubw*/governor
+                    do
+                        echo "bw_hwmon" > $devfreq_gov
+                        for cpu_bimc_io_percent in /sys/class/devfreq/qcom,cpubw*/bw_hwmon/io_percent
+                        do
+                            echo 25 > $cpu_bimc_io_percent
+                        done
+                    done
+                    for poll in /sys/class/devfreq/qcom,cpubw*/polling_interval
+                    do
+                        echo 20 > $poll
+                    done
+                else
+                    # Bus-DCVS settings
+                    echo "bw_hwmon" > /sys/class/devfreq/0.qcom,cpubw/governor
+                    echo 16 > /sys/class/devfreq/0.qcom,cpubw/bw_hwmon/io_percent
+                    echo 20 > /sys/class/devfreq/0.qcom,cpubw/polling_interval
+
+                    chown -h system.system /sys/class/devfreq/0.qcom,cpubw/governor
+                    chown -h system.system /sys/class/devfreq/0.qcom,cpubw/bw_hwmon/io_percent
+                    chown -h system.system /sys/class/devfreq/0.qcom,cpubw/polling_interval
+                    chown -h system.system /sys/class/devfreq/0.qcom,cpubw/max_freq
+                    chown -h system.system /sys/class/devfreq/0.qcom,cpubw/min_freq
+                    chmod -h 0660 /sys/class/devfreq/0.qcom,cpubw/governor
+                    chmod -h 0660 /sys/class/devfreq/0.qcom,cpubw/bw_hwmon/io_percent
+                    chmod -h 0660 /sys/class/devfreq/0.qcom,cpubw/polling_interval
+                    chmod -h 0664 /sys/class/devfreq/0.qcom,cpubw/max_freq
+                    chmod -h 0664 /sys/class/devfreq/0.qcom,cpubw/min_freq
+                fi
+
+                for devfreq_gov in /sys/class/devfreq/qcom,mincpubw*/governor
+                do
+                    echo "powersave" > $devfreq_gov
+                    for timeout in	/sys/class/devfreq/qcom,mincpubw*/cpufreq/timeout
+                    do
+                        echo 20 > $timeout
+                    done
+                done
+
+                for gpu_bimc_io_percent in /sys/class/devfreq/qcom,gpubw*/bw_hwmon/io_percent
+                do
+                    echo 40 > $gpu_bimc_io_percent
+                done
+
+                chown -h system.system /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay
+                chown -h system.system /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load
+                chown -h system.system /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate
+                chown -h system.system /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq
+                chown -h system.system /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy
+                chown -h system.system /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads
+                chown -h system.system /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time
+                chown -h system.system /sys/devices/system/cpu/cpu0/cpufreq/interactive/sampling_down_factor
+                chown -h system.system /sys/devices/system/cpu/cpu0/cpufreq/interactive/lpm_disable_freq
+                chown -h system.system /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif
+                chown -h system.system /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load
+                chmod -h 0660 /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay
+                chmod -h 0660 /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load
+                chmod -h 0660 /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate
+                chmod -h 0660 /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq
+                chmod -h 0660 /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy
+                chmod -h 0660 /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads
+                chmod -h 0660 /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time
+                chmod -h 0660 /sys/devices/system/cpu/cpu0/cpufreq/interactive/sampling_down_factor
+                chmod -h 0660 /sys/devices/system/cpu/cpu0/cpufreq/interactive/lpm_disable_freq
+                chmod -h 0660 /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif
+                chmod -h 0660 /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load
+
+                echo "25000 1100000:50000 1300000:25000" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay
+                echo 99 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load
+                echo 25000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate
+                echo 960000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq
+                echo 2000000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/lpm_disable_freq
+                echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy
+                echo "63 500000:85 850000:80 1000000:95" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads
+                echo 50000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time
+                echo 50000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/sampling_down_factor
+                echo 499200 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+                echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif
+                echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load
+
+                # Set governor parameters for power cluster
+                chown -h system.system /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay
+                chown -h system.system /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load
+                chown -h system.system /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate
+                chown -h system.system /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq
+                chown -h system.system /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy
+                chown -h system.system /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads
+                chown -h system.system /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time
+                chown -h system.system /sys/devices/system/cpu/cpu4/cpufreq/interactive/sampling_down_factor
+                chown -h system.system /sys/devices/system/cpu/cpu4/cpufreq/interactive/lpm_disable_freq
+                chown -h system.system /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif
+                chown -h system.system /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load
+                chmod -h 0660 /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay
+                chmod -h 0660 /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load
+                chmod -h 0660 /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate
+                chmod -h 0660 /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq
+                chmod -h 0660 /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy
+                chmod -h 0660 /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads
+                chmod -h 0660 /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time
+                chmod -h 0660 /sys/devices/system/cpu/cpu4/cpufreq/interactive/sampling_down_factor
+                chmod -h 0660 /sys/devices/system/cpu/cpu4/cpufreq/interactive/lpm_disable_freq
+                chmod -h 0660 /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif
+                chmod -h 0660 /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load
+
+                echo "25000 800000:50000" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay
+                echo 90 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load
+                echo 25000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate
+                echo 800000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq
+                echo 800000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/lpm_disable_freq
+                echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy
+                echo "85 800000:90" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads
+                echo 50000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time
+                echo 50000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/sampling_down_factor
+                echo 533333 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq
+                echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif
+                echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load
+
+                echo 400000 > /proc/sys/kernel/sched_freq_inc_notify
+                echo 400000 > /proc/sys/kernel/sched_freq_dec_notify
+
+                # enable thermal core_control now
+                echo 1 > /sys/module/msm_thermal/core_control/enabled
+
+                echo 1 > /sys/devices/system/cpu/cpu1/online
+                echo 1 > /sys/devices/system/cpu/cpu2/online
+                echo 1 > /sys/devices/system/cpu/cpu3/online
+                echo 1 > /sys/devices/system/cpu/cpu4/online
+                echo 1 > /sys/devices/system/cpu/cpu5/online
+                echo 1 > /sys/devices/system/cpu/cpu6/online
+                echo 1 > /sys/devices/system/cpu/cpu7/online
+                chown -h root.system /sys/devices/system/cpu/cpu0/online
+                chown -h root.system /sys/devices/system/cpu/cpu1/online
+                chown -h root.system /sys/devices/system/cpu/cpu2/online
+                chown -h root.system /sys/devices/system/cpu/cpu3/online
+                chown -h root.system /sys/devices/system/cpu/cpu4/online
+                chown -h root.system /sys/devices/system/cpu/cpu5/online
+                chown -h root.system /sys/devices/system/cpu/cpu6/online
+                chown -h root.system /sys/devices/system/cpu/cpu7/online
+                chmod -h 664 /sys/devices/system/cpu/cpu0/online
+                chmod -h 664 /sys/devices/system/cpu/cpu1/online
+                chmod -h 664 /sys/devices/system/cpu/cpu2/online
+                chmod -h 664 /sys/devices/system/cpu/cpu3/online
+                chmod -h 664 /sys/devices/system/cpu/cpu4/online
+                chmod -h 664 /sys/devices/system/cpu/cpu5/online
+                chmod -h 664 /sys/devices/system/cpu/cpu6/online
+                chmod -h 664 /sys/devices/system/cpu/cpu7/online
+                echo Y > /sys/module/lpm_levels/system/power/power-l2-active/idle_enabled
+                echo Y > /sys/module/lpm_levels/system/power/power-l2-pc/idle_enabled
+                echo Y > /sys/module/lpm_levels/system/performance/performance-l2-active/idle_enabled
+                echo Y > /sys/module/lpm_levels/system/performance/performance-l2-pc/idle_enabled
+                echo Y > /sys/module/lpm_levels/system/power/power-l2-pc/suspend_enabled
+                echo Y > /sys/module/lpm_levels/system/performance/performance-l2-pc/suspend_enabled
+                echo Y > /sys/module/lpm_levels/system/system-cci-active/idle_enabled
+                echo Y > /sys/module/lpm_levels/system/system-cci-retention/idle_enabled
+                echo Y > /sys/module/lpm_levels/system/system-cci-pc/idle_enabled
+                echo Y > /sys/module/lpm_levels/system/system-cci-pc/suspend_enabled
+                echo 90 > /proc/sys/kernel/sched_upmigrate
+                echo 70 > /proc/sys/kernel/sched_downmigrate
+                echo 30 > /proc/sys/kernel/sched_init_task_load
+                echo 5 > /proc/sys/kernel/sched_ravg_hist_size
+                echo 10 > /proc/sys/kernel/sched_upmigrate_min_nice
+                echo 1 > /proc/sys/kernel/sched_boot_complete
+                echo 30 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_load
+                echo 30 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_load
+                echo 30 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_load
+                echo 30 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_load
+                echo 30 > /sys/devices/system/cpu/cpu4/sched_mostly_idle_load
+                echo 30 > /sys/devices/system/cpu/cpu5/sched_mostly_idle_load
+                echo 30 > /sys/devices/system/cpu/cpu6/sched_mostly_idle_load
+                echo 30 > /sys/devices/system/cpu/cpu7/sched_mostly_idle_load
+                echo 960000 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_freq
+                echo 960000 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_freq
+                echo 960000 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_freq
+                echo 960000 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_freq
+                chown -h radio.system /sys/class/kgsl/kgsl-3d0/default_pwrlevel
+                chown -h radio.system /sys/class/kgsl/kgsl-3d0/idle_timer
+                chmod -h 664 /sys/class/kgsl/kgsl-3d0/default_pwrlevel
+                chmod -h 664 /sys/class/kgsl/kgsl-3d0/idle_timer
+                rm /data/system/default_values
+            ;;
+        esac
+
+        # Apply governor settings for 8939 V3.0. confirm the soc id value and method
+        case "$soc_id" in
+            "65536" )
+            # HMP scheduler settings for 8939 V3.0
+            echo 3 > /proc/sys/kernel/sched_window_stats_policy
+            echo 3 > /proc/sys/kernel/sched_ravg_hist_size
+
+            # HMP Task packing settings for 8939 V3.0
+            echo 20 > /proc/sys/kernel/sched_small_task
+            echo 30 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_load
+            echo 30 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_load
+            echo 30 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_load
+            echo 30 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_load
+            echo 30 > /sys/devices/system/cpu/cpu4/sched_mostly_idle_load
+            echo 30 > /sys/devices/system/cpu/cpu5/sched_mostly_idle_load
+            echo 30 > /sys/devices/system/cpu/cpu6/sched_mostly_idle_load
+            echo 30 > /sys/devices/system/cpu/cpu7/sched_mostly_idle_load
+
+            echo 3 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_nr_run
+            echo 3 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_nr_run
+            echo 3 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_nr_run
+            echo 3 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_nr_run
+            echo 3 > /sys/devices/system/cpu/cpu4/sched_mostly_idle_nr_run
+            echo 3 > /sys/devices/system/cpu/cpu5/sched_mostly_idle_nr_run
+            echo 3 > /sys/devices/system/cpu/cpu6/sched_mostly_idle_nr_run
+            echo 3 > /sys/devices/system/cpu/cpu7/sched_mostly_idle_nr_run
+
+            echo 0 > /sys/devices/system/cpu/cpu0/sched_prefer_idle
+            echo 0 > /sys/devices/system/cpu/cpu1/sched_prefer_idle
+            echo 0 > /sys/devices/system/cpu/cpu2/sched_prefer_idle
+            echo 0 > /sys/devices/system/cpu/cpu3/sched_prefer_idle
+            echo 0 > /sys/devices/system/cpu/cpu4/sched_prefer_idle
+            echo 0 > /sys/devices/system/cpu/cpu5/sched_prefer_idle
+            echo 0 > /sys/devices/system/cpu/cpu6/sched_prefer_idle
+            echo 0 > /sys/devices/system/cpu/cpu7/sched_prefer_idle
+
+            for devfreq_gov in /sys/class/devfreq/qcom,cpubw*/governor
+            do
+                echo "bw_hwmon" > $devfreq_gov
+                for cpu_io_percent in /sys/class/devfreq/qcom,cpubw*/bw_hwmon/io_percent
+                do
+                    echo 20 > $cpu_io_percent
+                done
+            done
+
+            for gpu_bimc_io_percent in /sys/class/devfreq/qcom,gpubw*/bw_hwmon/io_percent
+            do
+                echo 40 > $gpu_bimc_io_percent
+            done
+            # disable thermal core_control to update interactive gov settings
+            echo 0 > /sys/module/msm_thermal/core_control/enabled
+
+            # enable governor for perf cluster
+            echo 1 > /sys/devices/system/cpu/cpu0/online
+            echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+            echo "19000 1113600:39000" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay
+            echo 85 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load
+            echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate
+            echo 1113600 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq
+            echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy
+            echo "1 960000:85 1113600:90 1344000:80" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads
+            echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time
+            echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/sampling_down_factor
+            echo 960000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+
+            # enable governor for power cluster
+            echo 1 > /sys/devices/system/cpu/cpu4/online
+            echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor
+            echo "39000 998400:19000" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay
+            echo 90 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load
+            echo 20000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate
+            echo 800000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq
+            echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy
+            echo "1 800000:90" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads
+            echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time
+            echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/sampling_down_factor
+            echo 800000 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq
+
+            # enable thermal core_control now
+            echo 1 > /sys/module/msm_thermal/core_control/enabled
+
+            # Bring up all cores online
+            echo 1 > /sys/devices/system/cpu/cpu1/online
+            echo 1 > /sys/devices/system/cpu/cpu2/online
+            echo 1 > /sys/devices/system/cpu/cpu3/online
+            echo 1 > /sys/devices/system/cpu/cpu5/online
+            echo 1 > /sys/devices/system/cpu/cpu6/online
+            echo 1 > /sys/devices/system/cpu/cpu7/online
+
+            # HMP scheduler (big.Little cluster related) settings
+            echo 93 > /proc/sys/kernel/sched_upmigrate
+            echo 70 > /proc/sys/kernel/sched_downmigrate
+
+            # Enable sched guided freq control
+            echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load
+            echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif
+            echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load
+            echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif
+            echo 50000 > /proc/sys/kernel/sched_freq_inc_notify
+            echo 50000 > /proc/sys/kernel/sched_freq_dec_notify
+
+            # Enable core control
+            insmod /system/lib/modules/core_ctl.ko
+            echo 2 > /sys/devices/system/cpu/cpu0/core_ctl/min_cpus
+            echo 4 > /sys/devices/system/cpu/cpu0/core_ctl/max_cpus
+            echo 68 > /sys/devices/system/cpu/cpu0/core_ctl/busy_up_thres
+            echo 40 > /sys/devices/system/cpu/cpu0/core_ctl/busy_down_thres
+            echo 100 > /sys/devices/system/cpu/cpu0/core_ctl/offline_delay_ms
+
+            ;;
+        esac
+    ;;
+esac
+
+case "$target" in
+    "msm8952")
+
+        # HMP scheduler settings for 8952 soc id is 264
+        echo 3 > /proc/sys/kernel/sched_window_stats_policy
+        echo 3 > /proc/sys/kernel/sched_ravg_hist_size
+
+        # HMP Task packing settings for 8952
+        echo 20 > /proc/sys/kernel/sched_small_task
+        echo 30 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_load
+        echo 30 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_load
+        echo 30 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_load
+        echo 30 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_load
+        echo 30 > /sys/devices/system/cpu/cpu4/sched_mostly_idle_load
+        echo 30 > /sys/devices/system/cpu/cpu5/sched_mostly_idle_load
+        echo 30 > /sys/devices/system/cpu/cpu6/sched_mostly_idle_load
+        echo 30 > /sys/devices/system/cpu/cpu7/sched_mostly_idle_load
+
+        echo 3 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_nr_run
+        echo 3 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_nr_run
+        echo 3 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_nr_run
+        echo 3 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_nr_run
+        echo 3 > /sys/devices/system/cpu/cpu4/sched_mostly_idle_nr_run
+        echo 3 > /sys/devices/system/cpu/cpu5/sched_mostly_idle_nr_run
+        echo 3 > /sys/devices/system/cpu/cpu6/sched_mostly_idle_nr_run
+        echo 3 > /sys/devices/system/cpu/cpu7/sched_mostly_idle_nr_run
+
+        echo 0 > /sys/devices/system/cpu/cpu0/sched_prefer_idle
+        echo 0 > /sys/devices/system/cpu/cpu1/sched_prefer_idle
+        echo 0 > /sys/devices/system/cpu/cpu2/sched_prefer_idle
+        echo 0 > /sys/devices/system/cpu/cpu3/sched_prefer_idle
+        echo 0 > /sys/devices/system/cpu/cpu4/sched_prefer_idle
+        echo 0 > /sys/devices/system/cpu/cpu5/sched_prefer_idle
+        echo 0 > /sys/devices/system/cpu/cpu6/sched_prefer_idle
+        echo 0 > /sys/devices/system/cpu/cpu7/sched_prefer_idle
+
+        for devfreq_gov in /sys/class/devfreq/qcom,cpubw*/governor
+        do
+            echo "bw_hwmon" > $devfreq_gov
+            for cpu_io_percent in /sys/class/devfreq/qcom,cpubw*/bw_hwmon/io_percent
+            do
+                echo 20 > $cpu_io_percent
+            done
+        done
+
+        for gpu_bimc_io_percent in /sys/class/devfreq/qcom,gpubw*/bw_hwmon/io_percent
+        do
+            echo 40 > $gpu_bimc_io_percent
+        done
+        # disable thermal core_control to update interactive gov settings
+        echo 0 > /sys/module/msm_thermal/core_control/enabled
+
+        # enable governor for perf cluster
+        echo 1 > /sys/devices/system/cpu/cpu0/online
+        echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+        echo "19000 1113600:39000" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay
+        echo 85 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load
+        echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate
+        echo 1113600 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq
+        echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy
+        echo "1 960000:85 1113600:90 1344000:80" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads
+        echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time
+        echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/sampling_down_factor
+        echo 960000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+
+        # enable governor for power cluster
+        echo 1 > /sys/devices/system/cpu/cpu4/online
+        echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor
+        echo "39000 998400:19000" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay
+        echo 90 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load
+        echo 20000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate
+        echo 800000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq
+        echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy
+        echo "1 800000:90" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads
+        echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time
+        echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/sampling_down_factor
+        echo 800000 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq
+
+        # enable thermal core_control now
+        echo 1 > /sys/module/msm_thermal/core_control/enabled
+
+        # Bring up all cores online
+        echo 1 > /sys/devices/system/cpu/cpu1/online
+        echo 1 > /sys/devices/system/cpu/cpu2/online
+        echo 1 > /sys/devices/system/cpu/cpu3/online
+        echo 1 > /sys/devices/system/cpu/cpu5/online
+        echo 1 > /sys/devices/system/cpu/cpu6/online
+        echo 1 > /sys/devices/system/cpu/cpu7/online
+
+        # HMP scheduler (big.Little cluster related) settings
+        echo 93 > /proc/sys/kernel/sched_upmigrate
+        echo 70 > /proc/sys/kernel/sched_downmigrate
+
+        # Enable sched guided freq control
+        echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load
+        echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif
+        echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load
+        echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif
+        echo 50000 > /proc/sys/kernel/sched_freq_inc_notify
+        echo 50000 > /proc/sys/kernel/sched_freq_dec_notify
+
+        # Enable core control
+        insmod /system/lib/modules/core_ctl.ko
+        echo 2 > /sys/devices/system/cpu/cpu0/core_ctl/min_cpus
+        echo 4 > /sys/devices/system/cpu/cpu0/core_ctl/max_cpus
+        echo 68 > /sys/devices/system/cpu/cpu0/core_ctl/busy_up_thres
+        echo 40 > /sys/devices/system/cpu/cpu0/core_ctl/busy_down_thres
+        echo 100 > /sys/devices/system/cpu/cpu0/core_ctl/offline_delay_ms
+    ;;
+esac
+
+
+case "$target" in
+    "apq8084")
+        echo 4 > /sys/module/lpm_levels/enable_low_power/l2
+        echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/retention/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/retention/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/retention/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/retention/idle_enabled
+        echo 0 > /sys/module/msm_thermal/core_control/enabled
+        echo 1 > /sys/devices/system/cpu/cpu1/online
+        echo 1 > /sys/devices/system/cpu/cpu2/online
+        echo 1 > /sys/devices/system/cpu/cpu3/online
+        for devfreq_gov in /sys/class/devfreq/qcom,cpubw*/governor
+        do
+            echo "cpubw_hwmon" > $devfreq_gov
+        done
+        echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+        echo "interactive" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
+        echo "interactive" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
+        echo "interactive" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor
+        echo "20000 1400000:40000 1700000:20000" > /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay
+        echo 90 > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load
+        echo 1497600 > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq
+        echo "85 1500000:90 1800000:70" > /sys/devices/system/cpu/cpufreq/interactive/target_loads
+        echo 40000 > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time
+        echo 20 > /sys/module/cpu_boost/parameters/boost_ms
+        echo 1728000 > /sys/module/cpu_boost/parameters/sync_threshold
+        echo 100000 > /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor
+        echo 1497600 > /sys/module/cpu_boost/parameters/input_boost_freq
+        echo 40 > /sys/module/cpu_boost/parameters/input_boost_ms
+        echo 1 > /dev/cpuctl/apps/cpu.notify_on_migrate
+        echo 300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        echo 300000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq
+        echo 300000 > /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq
+        echo 300000 > /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq
+        echo 1 > /sys/module/msm_thermal/core_control/enabled
+        setprop ro.qualcomm.perf.cores_online 2
+        chown -h  system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
+        chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        chown -h root.system /sys/devices/system/cpu/mfreq
+        chmod -h 220 /sys/devices/system/cpu/mfreq
+        chown -h root.system /sys/devices/system/cpu/cpu1/online
+        chown -h root.system /sys/devices/system/cpu/cpu2/online
+        chown -h root.system /sys/devices/system/cpu/cpu3/online
+        chmod -h 664 /sys/devices/system/cpu/cpu1/online
+        chmod -h 664 /sys/devices/system/cpu/cpu2/online
+        chmod -h 664 /sys/devices/system/cpu/cpu3/online
+    ;;
+esac
+
+case "$target" in
+    "mpq8092")
+        echo 4 > /sys/module/lpm_levels/enable_low_power/l2
+        echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/suspend_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu0/retention/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu1/retention/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu2/retention/idle_enabled
+        echo 1 > /sys/module/msm_pm/modes/cpu3/retention/idle_enabled
+        echo 0 > /sys/module/msm_thermal/core_control/enabled
+        echo 1 > /sys/devices/system/cpu/cpu1/online
+        echo 1 > /sys/devices/system/cpu/cpu2/online
+        echo 1 > /sys/devices/system/cpu/cpu3/online
+        echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+        echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
+        echo "ondemand" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
+        echo "ondemand" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor
+        echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+        echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
+        echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy
+        echo 300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        echo 300000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq
+        echo 300000 > /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq
+        echo 300000 > /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq
+        echo 1 > /sys/module/msm_thermal/core_control/enabled
+        chown -h  system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
+        chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        chown -h root.system /sys/devices/system/cpu/mfreq
+        chmod -h 220 /sys/devices/system/cpu/mfreq
+        chown -h root.system /sys/devices/system/cpu/cpu1/online
+        chown -h root.system /sys/devices/system/cpu/cpu2/online
+        chown -h root.system /sys/devices/system/cpu/cpu3/online
+        chmod -h 664 /sys/devices/system/cpu/cpu1/online
+        chmod -h 664 /sys/devices/system/cpu/cpu2/online
+        chmod -h 664 /sys/devices/system/cpu/cpu3/online
+	;;
+esac
+
+case "$target" in
+    "msm8994")
+        echo 0 > /sys/module/msm_thermal/core_control/enabled
+        echo -n disable > /sys/devices/soc.*/qcom,bcl.*/mode
+        bcl_hotplug_mask=`cat /sys/devices/soc.*/qcom,bcl.*/hotplug_mask`
+        echo 0 > /sys/devices/soc.*/qcom,bcl.*/hotplug_mask
+        echo -n enable > /sys/devices/soc.*/qcom,bcl.*/mode
+	echo 1 > /sys/devices/system/cpu/cpu4/online
+	echo 1 > /sys/devices/system/cpu/cpu5/online
+	echo 1 > /sys/devices/system/cpu/cpu6/online
+	echo 1 > /sys/devices/system/cpu/cpu7/online
+        echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled
+        # configure governor settings for little cluster
+        echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+        echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load
+        echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif
+        echo "20000 750000:40000 800000:20000" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay
+        echo 90 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load
+        echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate
+        echo 768000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq
+        echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy
+        echo "85 780000:90" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads
+        echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time
+        echo 384000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        # configure governor settings for big cluster
+        echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor
+        echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load
+        echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif
+        echo "20000 750000:40000 800000:20000" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay
+        echo 99 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load
+        echo 20000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate
+        echo 768000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq
+        echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy
+        echo "85 780000:90" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads
+        echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time
+        echo 384000 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq
+	echo 1 > /sys/module/msm_thermal/core_control/enabled
+	echo -n disable > /sys/devices/soc.*/qcom,bcl.*/mode
+	echo $bcl_hotplug_mask > /sys/devices/soc.*/qcom,bcl.*/hotplug_mask
+	echo -n enable > /sys/devices/soc.*/qcom,bcl.*/mode
+        # Enable task migration fixups in the scheduler
+        echo 1 > /proc/sys/kernel/sched_migration_fixup
+        for devfreq_gov in /sys/class/devfreq/qcom,cpubw*/governor
+        do
+            echo "bw_hwmon" > $devfreq_gov
+        done
+        /system/bin/energy-awareness
+        #enable rps static configuration
+        echo 8 >  /sys/class/net/rmnet_ipa0/queues/rx-0/rps_cpus
+        echo 30 > /proc/sys/kernel/sched_small_task
+    ;;
+esac
+
+case "$target" in
+    "msm8909")
+
+        if [ -f /sys/devices/soc0/soc_id ]; then
+           soc_id=`cat /sys/devices/soc0/soc_id`
+        else
+           soc_id=`cat /sys/devices/system/soc/soc0/id`
+        fi
+
+        #Enable adaptive LMK and set vmpressure_file_min
+        echo 1 > /sys/module/lowmemorykiller/parameters/enable_adaptive_lmk
+        echo 69253 > /sys/module/lowmemorykiller/parameters/vmpressure_file_min
+
+        # HMP scheduler settings for 8909 similiar to 8916
+        echo 3 > /proc/sys/kernel/sched_window_stats_policy
+        echo 3 > /proc/sys/kernel/sched_ravg_hist_size
+
+        # HMP Task packing settings for 8909 similiar to 8916
+        echo 30 > /proc/sys/kernel/sched_small_task
+        echo 50 > /proc/sys/kernel/sched_mostly_idle_load
+        echo 10 > /proc/sys/kernel/sched_mostly_idle_nr_run
+
+        # Apply governor settings for 8909
+
+        # disable thermal core_control to update scaling_min_freq
+        echo 0 > /sys/module/msm_thermal/core_control/enabled
+        echo 1 > /sys/devices/system/cpu/cpu0/online
+        echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+        echo 400000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        # enable thermal core_control now
+        echo 1 > /sys/module/msm_thermal/core_control/enabled
+
+        echo "25000 800000:50000" > /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay
+        echo 90 > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load
+        echo 25000 > /sys/devices/system/cpu/cpufreq/interactive/timer_rate
+        echo 800000 > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq
+        echo 0 > /sys/devices/system/cpu/cpufreq/interactive/io_is_busy
+        echo "1 400000:85 998400:90 1094400:80" > /sys/devices/system/cpu/cpufreq/interactive/target_loads
+        echo 50000 > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time
+        echo 50000 > /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor
+
+        # Bring up all cores online
+        echo 1 > /sys/devices/system/cpu/cpu1/online
+	echo 1 > /sys/devices/system/cpu/cpu2/online
+	echo 1 > /sys/devices/system/cpu/cpu3/online
+	echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled
+
+	for devfreq_gov in /sys/class/devfreq/qcom,cpubw*/governor
+	do
+		echo "bw_hwmon" > $devfreq_gov
+	done
+	;;
+esac
+
+case "$target" in
+    "msm7627_ffa" | "msm7627_surf" | "msm7627_6x")
+        echo 25000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+        ;;
+esac
+
+case "$target" in
+    "qsd8250_surf" | "qsd8250_ffa" | "qsd8650a_st1x")
+        echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+        ;;
+esac
+
+case "$target" in
+    "qsd8650a_st1x")
+        mount -t debugfs none /sys/kernel/debug
+    ;;
+esac
+
+chown -h system /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+chown -h system /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
+chown -h system /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy
+
+emmc_boot=`getprop ro.boot.emmc`
+case "$emmc_boot"
+    in "true")
+        chown -h system /sys/devices/platform/rs300000a7.65536/force_sync
+        chown -h system /sys/devices/platform/rs300000a7.65536/sync_sts
+        chown -h system /sys/devices/platform/rs300100a7.65536/force_sync
+        chown -h system /sys/devices/platform/rs300100a7.65536/sync_sts
+    ;;
+esac
+
+case "$target" in
+    "msm8960" | "msm8660" | "msm7630_surf")
+        echo 10 > /sys/devices/platform/msm_sdcc.3/idle_timeout
+        ;;
+    "msm7627a")
+        echo 10 > /sys/devices/platform/msm_sdcc.1/idle_timeout
+        ;;
+esac
+
+# Post-setup services
+case "$target" in
+    "msm8660" | "msm8960" | "msm8226" | "msm8610" | "mpq8092" )
+        start mpdecision
+    ;;
+    "msm8916")
+        if [ -f /sys/devices/soc0/soc_id ]; then
+           soc_id=`cat /sys/devices/soc0/soc_id`
+        else
+           soc_id=`cat /sys/devices/system/soc/soc0/id`
+        fi
+        case $soc_id in
+            "239" | "241" | "263" | "268" | "269" | "270" | "271")
+            setprop ro.min_freq_0 499200
+            setprop ro.min_freq_4 533333
+	;;
+	    "206" | "247" | "248" | "249" | "250" | "233" | "240" | "242")
+            setprop ro.min_freq_0 800000
+        ;;
+        esac
+        #start perfd after setprop
+        start perfd # start perfd on 8916, 8939 and 8929
+    ;;
+    "msm8974")
+        start mpdecision
+        echo 512 > /sys/block/mmcblk0/bdi/read_ahead_kb
+    ;;
+    "msm8994")
+        rm /data/system/default_values
+        setprop ro.min_freq_0 384000
+        setprop ro.min_freq_4 384000
+        start perfd
+    ;;
+    "apq8084")
+        rm /data/system/default_values
+        start mpdecision
+        echo 512 > /sys/block/mmcblk0/bdi/read_ahead_kb
+        echo 512 > /sys/block/sda/bdi/read_ahead_kb
+        echo 512 > /sys/block/sdb/bdi/read_ahead_kb
+        echo 512 > /sys/block/sdc/bdi/read_ahead_kb
+        echo 512 > /sys/block/sdd/bdi/read_ahead_kb
+        echo 512 > /sys/block/sde/bdi/read_ahead_kb
+        echo 512 > /sys/block/sdf/bdi/read_ahead_kb
+        echo 512 > /sys/block/sdg/bdi/read_ahead_kb
+        echo 512 > /sys/block/sdh/bdi/read_ahead_kb
+    ;;
+    "msm7627a")
+        if [ -f /sys/devices/soc0/soc_id ]; then
+            soc_id=`cat /sys/devices/soc0/soc_id`
+        else
+            soc_id=`cat /sys/devices/system/soc/soc0/id`
+        fi
+        case "$soc_id" in
+            "127" | "128" | "129")
+                start mpdecision
+        ;;
+        esac
+    ;;
+esac
+
+# Enable Power modes and set the CPU Freq Sampling rates
+case "$target" in
+     "msm7627a")
+        start qosmgrd
+    echo 1 > /sys/module/pm2/modes/cpu0/standalone_power_collapse/idle_enabled
+    echo 1 > /sys/module/pm2/modes/cpu1/standalone_power_collapse/idle_enabled
+    echo 1 > /sys/module/pm2/modes/cpu0/standalone_power_collapse/suspend_enabled
+    echo 1 > /sys/module/pm2/modes/cpu1/standalone_power_collapse/suspend_enabled
+    #SuspendPC:
+    echo 1 > /sys/module/pm2/modes/cpu0/power_collapse/suspend_enabled
+    #IdlePC:
+    echo 1 > /sys/module/pm2/modes/cpu0/power_collapse/idle_enabled
+    echo 25000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+    ;;
+esac
+
+# Change adj level and min_free_kbytes setting for lowmemory killer to kick in
+case "$target" in
+     "msm7627a")
+    echo 0,1,2,4,9,12 > /sys/module/lowmemorykiller/parameters/adj
+    echo 5120 > /proc/sys/vm/min_free_kbytes
+     ;;
+esac
+
+# Install AdrenoTest.apk if not already installed
+if [ -f /data/prebuilt/AdrenoTest.apk ]; then
+    if [ ! -d /data/data/com.qualcomm.adrenotest ]; then
+        pm install /data/prebuilt/AdrenoTest.apk
+    fi
+fi
+
+# Install SWE_Browser.apk if not already installed
+if [ -f /data/prebuilt/SWE_AndroidBrowser.apk ]; then
+    if [ ! -d /data/data/com.android.swe.browser ]; then
+        pm install /data/prebuilt/SWE_AndroidBrowser.apk
+    fi
+fi
+
+# Change adj level and min_free_kbytes setting for lowmemory killer to kick in
+case "$target" in
+     "msm8660")
+        start qosmgrd
+        echo 0,1,2,4,9,12 > /sys/module/lowmemorykiller/parameters/adj
+        echo 5120 > /proc/sys/vm/min_free_kbytes
+     ;;
+esac
+
+case "$target" in
+    "msm8226" | "msm8974" | "msm8610" | "apq8084" | "mpq8092" | "msm8610" | "msm8916" | "msm8994")
+        # Let kernel know our image version/variant/crm_version
+        image_version="10:"
+        image_version+=`getprop ro.build.id`
+        image_version+=":"
+        image_version+=`getprop ro.build.version.incremental`
+        image_variant=`getprop ro.product.name`
+        image_variant+="-"
+        image_variant+=`getprop ro.build.type`
+        oem_version=`getprop ro.build.version.codename`
+        echo 10 > /sys/devices/soc0/select_image
+        echo $image_version > /sys/devices/soc0/image_version
+        echo $image_variant > /sys/devices/soc0/image_variant
+        echo $oem_version > /sys/devices/soc0/image_crm_version
+        ;;
+esac
+
+# Create native cgroup and move all tasks to it. Allot 15% real-time
+# bandwidth limit to native cgroup (which is what remains after
+# Android uses up 80% real-time bandwidth limit). root cgroup should
+# become empty after all tasks are moved to native cgroup.
+
+CGROUP_ROOT=/dev/cpuctl
+mkdir $CGROUP_ROOT/native
+echo 150000 > $CGROUP_ROOT/native/cpu.rt_runtime_us
+
+# We could be racing with task creation, as a result of which its possible that
+# we may fail to move all tasks from root cgroup to native cgroup in one shot.
+# Retry few times before giving up.
+
+for loop_count in 1 2 3
+do
+	for i in $(cat $CGROUP_ROOT/tasks)
+	do
+		echo $i > $CGROUP_ROOT/native/tasks
+	done
+
+	root_tasks=$(cat $CGROUP_ROOT/tasks)
+	if [ -z "$root_tasks" ]
+	then
+		break
+	fi
+done
+
+# Check if we failed to move all tasks from root cgroup
+if [ ! -z "$root_tasks" ]
+then
+	echo "Error: Could not move all tasks to native cgroup"
+fi
diff --git a/rootdir/etc/init.qcom.uicc.sh b/rootdir/etc/init.qcom.uicc.sh
new file mode 100644
index 0000000..e226c0d
--- /dev/null
+++ b/rootdir/etc/init.qcom.uicc.sh
@@ -0,0 +1,115 @@
+#!/system/bin/sh
+# Copyright (c) 2014, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of The Linux Foundation nor
+#       the names of its contributors may be used to endorse or promote
+#       products derived from this software without specific prior written
+#       permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+target=`getprop ro.board.platform`
+action=`getprop sys.usb_uicc.enabled`
+
+if [ -f /sys/devices/soc0/soc_id ]; then
+    soc_hwid=`cat /sys/devices/soc0/soc_id`
+else
+    soc_hwid=`cat /sys/devices/system/soc/soc0/id`
+fi
+
+# No path is set up at this point so we have to do it here.
+PATH=/sbin:/system/sbin:/system/bin:/system/xbin
+export PATH
+
+uicc_insert()
+{
+    case $target in
+    "msm8916")
+        if [ $soc_hwid == "239" ] || [ $soc_hwid == "268" ] || [ $soc_hwid == "269" ] || [ $soc_hwid == "270" ] || [ $soc_hwid == "271" ]; then
+            echo Y > /sys/module/ehci_msm_uicc/parameters/uicc_card_present
+            echo 79c0000.qcom,ehci-host  > /sys/bus/platform/drivers/msm_ehci_uicc/bind
+        elif [ $soc_hwid == "206" ]; then
+            echo Y > /sys/module/ice40_hcd/parameters/uicc_card_present
+            echo spi0.0 > /sys/bus/spi/drivers/ice40_spi/bind
+        else
+            echo "The TARGET ID is $target hw $soc_hwid"
+        fi
+        ;;
+    "msm8610")
+        insmod /system/lib/modules/ice40-hcd.ko
+        ;;
+    "msm8226")
+        echo 1 > /sys/bus/platform/devices/msm_smsc_hub/enable
+        ;;
+    "msm8974")
+        echo Y > /sys/module/ehci_hcd/parameters/uicc_card_present
+        echo msm_ehci_host > /sys/bus/platform/drivers/msm_ehci_host/bind
+        ;;
+    *)
+        echo "USB_UICC invalid target when insert uicc!"
+        ;;
+    esac
+}
+
+uicc_remove()
+{
+    case $target in
+    "msm8916")
+        if [ $soc_hwid == "239" ] || [ $soc_hwid == "268" ] || [ $soc_hwid == "269" ] || [ $soc_hwid == "270" ] || [ $soc_hwid == "271" ]; then
+            echo 79c0000.qcom,ehci-host  > /sys/bus/platform/drivers/msm_ehci_uicc/unbind
+            echo N > /sys/module/ehci_msm_uicc/parameters/uicc_card_present
+        elif [ $soc_hwid == "206" ]; then
+            echo spi0.0 > /sys/bus/spi/drivers/ice40_spi/unbind
+            echo N > /sys/module/ice40_hcd/parameters/uicc_card_present
+        else
+            echo "The TARGET ID is $target hw $soc_hwid"
+        fi
+        ;;
+    "msm8610")
+        rmmod /system/lib/modules/ice40-hcd.ko
+        ;;
+    "msm8226")
+        echo 0 > /sys/bus/platform/devices/msm_smsc_hub/enable
+        ;;
+    "msm8974")
+        echo msm_ehci_host > /sys/bus/platform/drivers/msm_ehci_host/unbind
+        echo N > /sys/module/ehci_hcd/parameters/uicc_card_present
+        ;;
+    *)
+        echo "USB_UICC invalid target when remove uicc!"
+        ;;
+    esac
+}
+
+case $action in
+"1")
+    uicc_insert
+    setprop sys.usb_uicc.loading 1
+    ;;
+"0")
+    uicc_remove
+    setprop sys.usb_uicc.loading 1
+    ;;
+*)
+    echo "USB_UICC invalid action for uicc operation!"
+    ;;
+esac
+
diff --git a/rootdir/etc/init.qcom.wifi.sh b/rootdir/etc/init.qcom.wifi.sh
new file mode 100644
index 0000000..bc03f5c
--- /dev/null
+++ b/rootdir/etc/init.qcom.wifi.sh
@@ -0,0 +1,506 @@
+#!/system/bin/sh
+# Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above
+#       copyright notice, this list of conditions and the following
+#       disclaimer in the documentation and/or other materials provided
+#       with the distribution.
+#     * Neither the name of The Linux Foundation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# This script will load and unload the wifi driver to put the wifi in
+# in deep sleep mode so that there won't be voltage leakage.
+# Loading/Unloading the driver only incase if the Wifi GUI is not going
+# to Turn ON the Wifi. In the Script if the wlan driver status is
+# ok(GUI loaded the driver) or loading(GUI is loading the driver) then
+# the script won't do anything. Otherwise (GUI is not going to Turn On
+# the Wifi) the script will load/unload the driver
+# This script will get called after post bootup.
+
+target="$1"
+serialno="$2"
+
+btsoc=""
+
+# No path is set up at this point so we have to do it here.
+PATH=/sbin:/system/sbin:/system/bin:/system/xbin
+export PATH
+
+# Trigger WCNSS platform driver
+trigger_wcnss()
+{
+    # We need to trigger WCNSS platform driver, WCNSS driver
+    # will export a file which we must touch so that the
+    # driver knows that userspace is ready to handle firmware
+    # download requests.
+
+    # See if an appropriately named device file is present
+    wcnssnode=`ls /dev/wcnss*`
+    case "$wcnssnode" in
+        *wcnss*)
+            # Before triggering wcnss, let it know that
+            # caldata is available at userspace.
+            if [ -e /data/misc/wifi/WCNSS_qcom_wlan_cal.bin ]; then
+                calparm=`ls /sys/module/wcnsscore/parameters/has_calibrated_data`
+                if [ -e $calparm ] && [ ! -e /data/misc/wifi/WCN_FACTORY ]; then
+                    echo 1 > $calparm
+                fi
+            fi
+            # There is a device file.  Write to the file
+            # so that the driver knows userspace is
+            # available for firmware download requests
+            echo 1 > $wcnssnode
+            ;;
+
+        *)
+            # There is not a device file present, so
+            # the driver must not be available
+            echo "No WCNSS device node detected"
+            ;;
+    esac
+
+    # Plumb down the device serial number
+    if [ -f /sys/devices/*wcnss-wlan/serial_number ]; then
+        cd /sys/devices/*wcnss-wlan
+        echo $serialno > serial_number
+        cd /
+    elif [ -f /sys/devices/platform/wcnss_wlan.0/serial_number ]; then
+        echo $serialno > /sys/devices/platform/wcnss_wlan.0/serial_number
+    fi
+}
+
+
+case "$target" in
+    msm8974* | msm8226* | msm8610*)
+
+# Check whether device is plugged on the HSIC bus
+# Currently HSIC bus will be the first index
+
+    if [ -e /sys/bus/platform/drivers/msm_hsic_host ]; then
+       if [ ! -L /sys/bus/usb/devices/1-1 ]; then
+           echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind
+       fi
+
+       chown -h system.system /sys/bus/platform/drivers/msm_hsic_host/bind
+       chown -h system.system /sys/bus/platform/drivers/msm_hsic_host/unbind
+       chmod -h 0200 /sys/bus/platform/drivers/msm_hsic_host/bind
+       chmod -h 0200 /sys/bus/platform/drivers/msm_hsic_host/unbind
+    fi
+
+    wlanchip=""
+
+# force ar6004 is ar6004_wlan.conf existed.
+    if [ -f /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf ]; then
+        wlanchip=`cat /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf`
+    fi
+
+# auto detect ar6004-sdio card
+# for ar6004-sdio card, the vendor id and device id is as the following
+# vendor id  device id
+#    0x0271     0x0400
+#    0x0271     0x0401
+    if [ "$wlanchip" == "" ]; then
+        sdio_vendors=`echo \`cat /sys/bus/mmc/devices/*/*/vendor\``
+        sdio_devices=`echo \`cat /sys/bus/mmc/devices/*/*/device\``
+        ven_idx=0
+
+        for vendor in $sdio_vendors; do
+            case "$vendor" in
+            "0x0271")
+                dev_idx=0
+                for device in $sdio_devices; do
+                    if [ $ven_idx -eq $dev_idx ]; then
+                        case "$device" in
+                        "0x0400" | "0x0401" | "0x0402")
+                            wlanchip="AR6004-SDIO"
+                            ;;
+                        *)
+                            ;;
+                        esac
+                    fi
+                    dev_idx=$(( $dev_idx + 1))
+                done
+                ;;
+            *)
+                ;;
+            esac
+            ven_idx=$(( $ven_idx + 1))
+        done
+    # auto detect ar6004-sdio card end
+    fi
+
+# for ar6004-usb card, the vendor id and device id is as the following
+# vendor id  product id
+#    0x0cf3     0x9374
+#    0x0cf3     0x9372
+    if [ "$wlanchip" == "" ]; then
+        usb_vendors=`echo \`cat /sys/bus/usb/devices/*/*/idVendor\``
+        usb_products=`echo \`cat /sys/bus/usb/devices/*/*/idProduct\``
+        ven_idx=0
+
+        for vendor in $usb_vendors; do
+            case "$vendor" in
+            "0cf3")
+                dev_idx=0
+                for product in $usb_products; do
+                    if [ $ven_idx -eq $dev_idx ]; then
+                        case "$product" in
+                        "9374" | "9372")
+                            wlanchip="AR6004-USB"
+                            ;;
+                        *)
+                            ;;
+                        esac
+                    fi
+                    dev_idx=$(( $dev_idx + 1))
+                done
+                ;;
+            *)
+                ;;
+            esac
+            ven_idx=$(( $ven_idx + 1))
+        done
+    # auto detect ar6004-usb card end
+    fi
+
+      echo "The WLAN Chip ID is $wlanchip"
+      case "$wlanchip" in
+      "AR6004-USB")
+      echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind
+      setprop wlan.driver.ath 2
+      setprop qcom.bluetooth.soc ath3k
+      btsoc="ath3k"
+      rm  /system/lib/modules/wlan.ko
+      ln -s /system/lib/modules/ath6kl-3.5/ath6kl_usb.ko \
+		/system/lib/modules/wlan.ko
+      rm /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin
+      rm /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin
+      ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin_usb \
+		/system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin
+      ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin_usb \
+		/system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin
+      rm /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin
+      ln -s /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin_usb \
+                /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin
+
+      # Use different wpa_supplicant.conf template between wcn driver
+      # and ath6kl driver
+      rm /system/etc/wifi/wpa_supplicant.conf
+      ln -s /system/etc/wifi/wpa_supplicant_ath6kl.conf \
+                /system/etc/wifi/wpa_supplicant.conf
+      ;;
+
+      "AR6004-SDIO")
+      setprop wlan.driver.ath 2
+      setprop qcom.bluetooth.soc ath3k
+      btsoc="ath3k"
+      # Chown polling nodes as needed from UI running on system server
+      chmod -h 0200 /sys/devices/msm_sdcc.1/polling
+      chmod -h 0200 /sys/devices/msm_sdcc.2/polling
+      chmod -h 0200 /sys/devices/msm_sdcc.3/polling
+      chmod -h 0200 /sys/devices/msm_sdcc.4/polling
+
+      chown -h system.system /sys/devices/msm_sdcc.1/polling
+      chown -h system.system /sys/devices/msm_sdcc.2/polling
+      chown -h system.system /sys/devices/msm_sdcc.3/polling
+      chown -h system.system /sys/devices/msm_sdcc.4/polling
+
+      rm  /system/lib/modules/wlan.ko
+      ln -s /system/lib/modules/ath6kl-3.5/ath6kl_sdio.ko \
+		/system/lib/modules/wlan.ko
+      rm /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin
+      rm /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin
+      ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin_sdio \
+		/system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin
+      ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin_sdio \
+		/system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin
+      rm /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin
+      ln -s /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin_sdio \
+                /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin
+
+      # Use different wpa_supplicant.conf template between wcn driver
+      # and ath6kl driver
+      rm /system/etc/wifi/wpa_supplicant.conf
+      ln -s /system/etc/wifi/wpa_supplicant_ath6kl.conf \
+                /system/etc/wifi/wpa_supplicant.conf
+      ;;
+
+      *)
+      echo "*** WI-FI chip ID is not specified in /persist/wlan_chip_id **"
+      echo "*** Use the default WCN driver.                             **"
+      setprop wlan.driver.ath 0
+      rm  /system/lib/modules/wlan.ko
+      ln -s /system/lib/modules/pronto/pronto_wlan.ko \
+		/system/lib/modules/wlan.ko
+      # Populate the writable driver configuration file
+      if [ ! -s /data/misc/wifi/WCNSS_qcom_cfg.ini ]; then
+          cp /system/etc/wifi/WCNSS_qcom_cfg.ini \
+		/data/misc/wifi/WCNSS_qcom_cfg.ini
+          chown -h system:wifi /data/misc/wifi/WCNSS_qcom_cfg.ini
+          chmod -h 660 /data/misc/wifi/WCNSS_qcom_cfg.ini
+      fi
+
+      # The property below is used in Qcom SDK for softap to determine
+      # the wifi driver config file
+      setprop wlan.driver.config /data/misc/wifi/WCNSS_qcom_cfg.ini
+
+      # Use different wpa_supplicant.conf template between wcn driver
+      # and ath6kl driver
+      rm /system/etc/wifi/wpa_supplicant.conf
+      ln -s /system/etc/wifi/wpa_supplicant_wcn.conf \
+                /system/etc/wifi/wpa_supplicant.conf
+
+      # Trigger WCNSS platform driver
+      trigger_wcnss &
+      ;;
+      esac
+      ;;
+
+    apq8084*)
+      echo "*** Use the CNSS CLD driver.**"
+      setprop wlan.driver.ath 0
+
+      # Use different wpa_supplicant.conf template between wcn driver
+      # and ath6kl driver
+      rm /system/etc/wifi/wpa_supplicant.conf
+      ln -s /system/etc/wifi/wpa_supplicant_wcn.conf \
+                /system/etc/wifi/wpa_supplicant.conf
+    ;;
+
+    msm8960*)
+
+      # Move cfg80211.ko to prima directory, the default cfg80211.ko is
+      # for wcnss solution
+      if [ ! -L /system/lib/modules/cfg80211.ko ]; then
+          mv /system/lib/modules/cfg80211.ko /system/lib/modules/prima/
+      fi
+
+      wlanchip=""
+
+      if [ -f /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf ]; then
+          wlanchip=`cat /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf`
+      fi
+
+      if [ "$wlanchip" == "" ]; then
+          # auto detect ar6004-usb card
+          # for ar6004-usb card, the vendor id and device id is as the following
+          # vendor id  product id
+          #    0x0cf3     0x9374
+          #    0x0cf3     0x9372
+          usb_vendors=`echo \`cat /sys/bus/usb/devices/*/*/idVendor\``
+          usb_products=`echo \`cat /sys/bus/usb/devices/*/*/idProduct\``
+          ven_idx=0
+
+          for vendor in $usb_vendors; do
+              case "$vendor" in
+              "0cf3")
+                  dev_idx=0
+                  for product in $usb_products; do
+                      if [ $ven_idx -eq $dev_idx ]; then
+                          case "$product" in
+                          "9374" | "9372")
+                              wlanchip="AR6004-USB"
+                              ;;
+                          *)
+                              ;;
+                          esac
+                      fi
+                      dev_idx=$(( $dev_idx + 1))
+                  done
+                  ;;
+              *)
+                  ;;
+              esac
+              ven_idx=$(( $ven_idx + 1))
+          done
+          # auto detect ar6004-usb card end
+      fi
+
+      if [ "$wlanchip" == "" ]; then
+          # auto detect ar6004-sdio card
+          # for ar6004-sdio card, the vendor id and device id is
+          # as the following
+          # vendor id  device id
+          #    0x0271     0x0400
+          #    0x0271     0x0401
+          sdio_vendors=`echo \`cat /sys/bus/mmc/devices/*/*/vendor\``
+          sdio_devices=`echo \`cat /sys/bus/mmc/devices/*/*/device\``
+          ven_idx=0
+
+          for vendor in $sdio_vendors; do
+              case "$vendor" in
+              "0x0271")
+                  dev_idx=0
+                  for device in $sdio_devices; do
+                      if [ $ven_idx -eq $dev_idx ]; then
+                          case "$device" in
+                          "0x0400" | "0x0401")
+                              wlanchip="AR6004-SDIO"
+                              ;;
+                          *)
+                              ;;
+                          esac
+                      fi
+                      dev_idx=$(( $dev_idx + 1))
+                  done
+                  ;;
+              *)
+                  ;;
+              esac
+              ven_idx=$(( $ven_idx + 1))
+          done
+          # auto detect ar6004-sdio card end
+      fi
+
+      echo "The WLAN Chip ID is $wlanchip"
+      case "$wlanchip" in
+      "AR6004-USB")
+        setprop wlan.driver.ath 2
+        rm  /system/lib/modules/wlan.ko
+        rm  /system/lib/modules/cfg80211.ko
+        ln -s /system/lib/modules/ath6kl-3.5/ath6kl_usb.ko \
+		/system/lib/modules/wlan.ko
+        ln -s /system/lib/modules/ath6kl-3.5/cfg80211.ko \
+		/system/lib/modules/cfg80211.ko
+        rm /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin
+        rm /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin
+        ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin_usb \
+		/system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin
+        ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin_usb \
+		/system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin
+
+        # Use different wpa_supplicant.conf template between wcn driver
+        # and ath6kl driver
+        rm /system/etc/wifi/wpa_supplicant.conf
+        ln -s /system/etc/wifi/wpa_supplicant_ath6kl.conf \
+                /system/etc/wifi/wpa_supplicant.conf
+        ;;
+      "AR6004-SDIO")
+        setprop wlan.driver.ath 2
+        setprop qcom.bluetooth.soc ath3k
+        btsoc="ath3k"
+        rm  /system/lib/modules/wlan.ko
+        rm  /system/lib/modules/cfg80211.ko
+        ln -s /system/lib/modules/ath6kl-3.5/ath6kl_sdio.ko \
+		/system/lib/modules/wlan.ko
+        ln -s /system/lib/modules/ath6kl-3.5/cfg80211.ko \
+		/system/lib/modules/cfg80211.ko
+        rm /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin
+        rm /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin
+        ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin_sdio \
+		/system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin
+        ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin_sdio \
+		/system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin
+
+        # Use different wpa_supplicant.conf template between wcn driver
+        # and ath6kl driver
+        rm /system/etc/wifi/wpa_supplicant.conf
+        ln -s /system/etc/wifi/wpa_supplicant_ath6kl.conf \
+                  /system/etc/wifi/wpa_supplicant.conf
+        ;;
+      *)
+        echo "*** WI-FI chip ID is not specified in /persist/wlan_chip_id **"
+        echo "*** Use the default WCN driver.                             **"
+        setprop wlan.driver.ath 0
+        rm  /system/lib/modules/wlan.ko
+        rm  /system/lib/modules/cfg80211.ko
+        ln -s /system/lib/modules/prima/prima_wlan.ko \
+		/system/lib/modules/wlan.ko
+        ln -s /system/lib/modules/prima/cfg80211.ko \
+		/system/lib/modules/cfg80211.ko
+
+        # The property below is used in Qcom SDK for softap to determine
+        # the wifi driver config file
+        setprop wlan.driver.config /data/misc/wifi/WCNSS_qcom_cfg.ini
+
+        # Use different wpa_supplicant.conf template between wcn driver
+        # and ath6kl driver
+        rm /system/etc/wifi/wpa_supplicant.conf
+        ln -s /system/etc/wifi/wpa_supplicant_wcn.conf \
+                  /system/etc/wifi/wpa_supplicant.conf
+
+        # Trigger WCNSS platform driver
+        trigger_wcnss &
+        ;;
+      esac
+      ;;
+
+    msm7627a*)
+
+        # The default cfg80211 module is for volans
+        if [ ! -L /system/lib/modules/cfg80211.ko ]; then
+            mv /system/lib/modules/cfg80211.ko /system/lib/modules/volans/
+        fi
+
+        wlanchip=`cat /persist/wlan_chip_id`
+        echo "The WLAN Chip ID is $wlanchip"
+        case "$wlanchip" in
+            "ATH6KL")
+             setprop wlan.driver.ath 1
+             rm  /system/lib/modules/wlan.ko
+             rm  /system/lib/modules/cfg80211.ko
+             ln -s /system/lib/modules/ath6kl/ath6kl_sdio.ko \
+		/system/lib/modules/wlan.ko
+             ln -s /system/lib/modules/ath6kl/cfg80211.ko \
+		/system/lib/modules/cfg80211.ko
+             ;;
+            "WCN1314")
+             setprop wlan.driver.ath 0
+             rm  /system/lib/modules/wlan.ko
+             rm  /system/lib/modules/cfg80211.ko
+             ln -s /system/lib/modules/volans/WCN1314_rf.ko \
+		/system/lib/modules/wlan.ko
+             ln -s /system/lib/modules/volans/cfg80211.ko \
+		/system/lib/modules/cfg80211.ko
+             ;;
+            *)
+             setprop wlan.driver.ath 1
+             rm  /system/lib/modules/wlan.ko
+             rm  /system/lib/modules/cfg80211.ko
+             ln -s /system/lib/modules/ath6kl/ath6kl_sdio.ko \
+		/system/lib/modules/wlan.ko
+             ln -s /system/lib/modules/ath6kl/cfg80211.ko \
+		/system/lib/modules/cfg80211.ko
+             echo "************************************************************"
+             echo "*** Error:WI-FI chip ID is not specified in"
+             echo "/persist/wlan_chip_id"
+             echo "*******    WI-FI may not work    ***************************"
+             ;;
+        esac
+    ;;
+
+    msm7627*)
+        ln -s /data/hostapd/qcom_cfg.ini /etc/firmware/wlan/qcom_cfg.ini
+        ln -s /persist/qcom_wlan_nv.bin /etc/firmware/wlan/qcom_wlan_nv.bin
+    ;;
+
+    msm8660*)
+    ;;
+
+    msm7630*)
+    ;;
+
+    *)
+      ;;
+esac
+
+# Run audio init script
+/system/bin/sh /system/etc/init.qcom.audio.sh "$target" "$btsoc"