Added missing init scripts
diff --git a/rootdir/etc/init.qcom.uicc.sh b/rootdir/etc/init.qcom.uicc.sh
new file mode 100644
index 0000000..e226c0d
--- /dev/null
+++ b/rootdir/etc/init.qcom.uicc.sh
@@ -0,0 +1,115 @@
+#!/system/bin/sh
+# Copyright (c) 2014, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# * Neither the name of The Linux Foundation nor
+# the names of its contributors may be used to endorse or promote
+# products derived from this software without specific prior written
+# permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+target=`getprop ro.board.platform`
+action=`getprop sys.usb_uicc.enabled`
+
+if [ -f /sys/devices/soc0/soc_id ]; then
+ soc_hwid=`cat /sys/devices/soc0/soc_id`
+else
+ soc_hwid=`cat /sys/devices/system/soc/soc0/id`
+fi
+
+# No path is set up at this point so we have to do it here.
+PATH=/sbin:/system/sbin:/system/bin:/system/xbin
+export PATH
+
+uicc_insert()
+{
+ case $target in
+ "msm8916")
+ if [ $soc_hwid == "239" ] || [ $soc_hwid == "268" ] || [ $soc_hwid == "269" ] || [ $soc_hwid == "270" ] || [ $soc_hwid == "271" ]; then
+ echo Y > /sys/module/ehci_msm_uicc/parameters/uicc_card_present
+ echo 79c0000.qcom,ehci-host > /sys/bus/platform/drivers/msm_ehci_uicc/bind
+ elif [ $soc_hwid == "206" ]; then
+ echo Y > /sys/module/ice40_hcd/parameters/uicc_card_present
+ echo spi0.0 > /sys/bus/spi/drivers/ice40_spi/bind
+ else
+ echo "The TARGET ID is $target hw $soc_hwid"
+ fi
+ ;;
+ "msm8610")
+ insmod /system/lib/modules/ice40-hcd.ko
+ ;;
+ "msm8226")
+ echo 1 > /sys/bus/platform/devices/msm_smsc_hub/enable
+ ;;
+ "msm8974")
+ echo Y > /sys/module/ehci_hcd/parameters/uicc_card_present
+ echo msm_ehci_host > /sys/bus/platform/drivers/msm_ehci_host/bind
+ ;;
+ *)
+ echo "USB_UICC invalid target when insert uicc!"
+ ;;
+ esac
+}
+
+uicc_remove()
+{
+ case $target in
+ "msm8916")
+ if [ $soc_hwid == "239" ] || [ $soc_hwid == "268" ] || [ $soc_hwid == "269" ] || [ $soc_hwid == "270" ] || [ $soc_hwid == "271" ]; then
+ echo 79c0000.qcom,ehci-host > /sys/bus/platform/drivers/msm_ehci_uicc/unbind
+ echo N > /sys/module/ehci_msm_uicc/parameters/uicc_card_present
+ elif [ $soc_hwid == "206" ]; then
+ echo spi0.0 > /sys/bus/spi/drivers/ice40_spi/unbind
+ echo N > /sys/module/ice40_hcd/parameters/uicc_card_present
+ else
+ echo "The TARGET ID is $target hw $soc_hwid"
+ fi
+ ;;
+ "msm8610")
+ rmmod /system/lib/modules/ice40-hcd.ko
+ ;;
+ "msm8226")
+ echo 0 > /sys/bus/platform/devices/msm_smsc_hub/enable
+ ;;
+ "msm8974")
+ echo msm_ehci_host > /sys/bus/platform/drivers/msm_ehci_host/unbind
+ echo N > /sys/module/ehci_hcd/parameters/uicc_card_present
+ ;;
+ *)
+ echo "USB_UICC invalid target when remove uicc!"
+ ;;
+ esac
+}
+
+case $action in
+"1")
+ uicc_insert
+ setprop sys.usb_uicc.loading 1
+ ;;
+"0")
+ uicc_remove
+ setprop sys.usb_uicc.loading 1
+ ;;
+*)
+ echo "USB_UICC invalid action for uicc operation!"
+ ;;
+esac
+