Added gps configuration files (mistakenly removed).
diff --git a/gps/izat.conf b/gps/izat.conf
new file mode 100644
index 0000000..35f482e
--- /dev/null
+++ b/gps/izat.conf
@@ -0,0 +1,193 @@
+########################################
+# NLP/WIFI positioning options bit mask
+########################################
+# Enable NLP fixes for WIPER/ODCPI feature => WIPER = 0x1
+# Enable free wifi scan injections for GEOFENCE => FREE_WIFI = 0x2
+# Enable SUPL2 MLD wifi => SUPL_WIFI = 0x4
+# Enable Attached Wifi AP info injection for GEOFENCE => FREE_AP_INFO = 0x8
+# default = WIPER | FREE_WIFI | SUPL_WIFI | FREE_AP_INFO
+NLP_WIFI_LISTENER_MODE = 0
+
+##################################################
+# Select WIFI Wait Timeout value in seconds for SUPL
+##################################################
+WIFI_WAIT_TIMEOUT_SELECT = 0
+
+################################
+# NLP Settings
+################################
+# NLP_MODE 1: GNP Only, 2: QNP Only, 3: Combo
+# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
+# to determine how much Tolerance for first position
+# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
+# to determine how much Tolerance for positions after first
+# NLP_THRESHOLD: Sets how many failures needed before
+# switching preferred NLP in Combo mode
+# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy
+# must be, in multiples, between two NLP location reports to
+# be considered much worse accuracy. Used in switching logic
+NLP_MODE = 1
+NLP_TOLERANCE_TIME_FIRST = 5000
+NLP_TOLERANCE_TIME_AFTER = 20000
+NLP_THRESHOLD = 3
+NLP_ACCURACY_MULTIPLE = 2
+
+# Threshold period for ZPP triggers
+ZPP_TRIGGER_THRESHOLD=10000
+
+###################################
+# GEOFENCE SERVICES
+###################################
+# If set to one of the defined values below, it will override
+# the responsiveness for geofence services, which implements
+# the Proximity Alert API. If not set to a value defined below,
+# which is default, it will not override the responsivness.
+# The geofence HAL API is unaffected by this value.
+# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values:
+# 1: LOW responsiveness
+# 2: MEDIUM responsiveness
+# 3: HIGH responsiveness
+GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
+
+#####################################
+# IZAT PREMIUM FEATURE SETTINGS
+#####################################
+#Possible states of a feature:
+#DISABLED
+#BASIC
+#PREMIUM
+
+#GTP_CELL_PROC valid options:
+# AP
+# MODEM
+GTP_CELL_PROC=MODEM
+
+#GTP_CELL valid modes:
+# DISABLED
+# BASIC
+GTP_CELL=BASIC
+
+#GTP_WIFI valid modes:
+# DISABLED
+# BASIC
+GTP_WIFI=BASIC
+
+#GTP_WAA valid modes:
+# DISABLED
+# BASIC
+GTP_WAA=DISABLED
+
+#SAP valid modes:
+# DISABLED
+# BASIC
+# PREMIUM
+SAP=BASIC
+
+#PIP valid modes:
+# DISABLED
+# PREMIUM
+PIP=DISABLED
+
+#####################################
+# Location process launcher settings
+#####################################
+
+#Values for PROCESS_STATE:
+# ENABLED
+# DISABLED
+
+#FEATURE MASKS:
+# GTP-WIFI 0X03
+# GTP-CELL 0X0c
+# GTP-WAA 0X300
+# PIP 0x30
+# SAP 0Xc0
+
+#Values for PLATFORMS can be:
+#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226
+#2. all -> for All platforms
+
+#Values for BASEBAND can be:
+#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
+#2. all -> for all basebands
+
+PROCESS_NAME=/system/bin/garden_app
+PROCESS_ARGUMENT=-u 0 -q 0 -j 0 -g 0 -l 0 -Z 0 -T 1
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps net_raw
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=all
+BASEBAND=auto
+
+PROCESS_NAME=/system/bin/gpsone_daemon
+PROCESS_ARGUMENT=
+PROCESS_STATE=DISABLED
+PROCESS_GROUPS=inet net_raw
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=msm7630_fusion
+BASEBAND=svlte2a sglte sglte2
+
+PROCESS_NAME=/system/bin/location-mq
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0x3f
+PLATFORMS=all
+BASEBAND=all
+
+PROCESS_NAME=/system/bin/lowi-server
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps net_admin wifi inet qcom_diag net_raw
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0x33
+PLATFORMS=all
+BASEBAND=all
+
+PROCESS_NAME=/system/bin/quipc_igsn
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=inet gps qcom_diag
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0x30
+PLATFORMS=all
+BASEBAND=all
+
+PROCESS_NAME=/system/bin/quipc_main
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps net_admin wifi inet qcom_diag
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0x30
+PLATFORMS=all
+BASEBAND=all
+
+PROCESS_NAME=/system/bin/xtwifi-inet-agent
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=inet gps
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0x0f
+PLATFORMS=all
+BASEBAND=all
+
+PROCESS_NAME=/system/bin/xtwifi-client
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=net_admin wifi inet gps
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0x30f
+PLATFORMS=all
+BASEBAND=all
+
+PROCESS_NAME=/system/vendor/bin/slim_ap_daemon
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps net_raw misc qcom_oncrpc
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xf0
+PLATFORMS=all
+BASEBAND=all