Add write buffer for tar writes
update fuse to 2.9.2
catch return from unlink so that we don't print error messages when things work
Change-Id: I1115039a0fa5d9d73f78ef1abd79755d7ffd9d96
diff --git a/fuse/include/fuse_common.h b/fuse/include/fuse_common.h
index 48c0746..dab3a56 100644
--- a/fuse/include/fuse_common.h
+++ b/fuse/include/fuse_common.h
@@ -17,16 +17,16 @@
#include "fuse_opt.h"
#include <stdint.h>
+#include <sys/types.h>
/** Major version of FUSE library interface */
#define FUSE_MAJOR_VERSION 2
/** Minor version of FUSE library interface */
-#define FUSE_MINOR_VERSION 8
+#define FUSE_MINOR_VERSION 9
#define FUSE_MAKE_VERSION(maj, min) ((maj) * 10 + (min))
-#define FUSE_VERSION 26
-//#define FUSE_VERSION FUSE_MAKE_VERSION(FUSE_MAJOR_VERSION, FUSE_MINOR_VERSION)
+#define FUSE_VERSION FUSE_MAKE_VERSION(FUSE_MAJOR_VERSION, FUSE_MINOR_VERSION)
/* This interface uses 64 bit off64_t */
#if _FILE_OFFSET_BITS != 64
@@ -70,8 +70,14 @@
seekable. Introduced in version 2.8 */
unsigned int nonseekable : 1;
+ /* Indicates that flock locks for this file should be
+ released. If set, lock_owner shall contain a valid value.
+ May only be set in ->release(). Introduced in version
+ 2.9 */
+ unsigned int flock_release : 1;
+
/** Padding. Do not use*/
- unsigned int padding : 28;
+ unsigned int padding : 27;
/** File handle. May be filled in by filesystem in open().
Available in all other file operations */
@@ -90,6 +96,10 @@
* FUSE_CAP_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
* FUSE_CAP_BIG_WRITES: filesystem can handle write size larger than 4kB
* FUSE_CAP_DONT_MASK: don't apply umask to file mode on create operations
+ * FUSE_CAP_SPLICE_WRITE: ability to use splice() to write to the fuse device
+ * FUSE_CAP_SPLICE_MOVE: ability to move data to the fuse device with splice()
+ * FUSE_CAP_SPLICE_READ: ability to use splice() to read from the fuse device
+ * FUSE_CAP_IOCTL_DIR: ioctl support on directories
*/
#define FUSE_CAP_ASYNC_READ (1 << 0)
#define FUSE_CAP_POSIX_LOCKS (1 << 1)
@@ -97,6 +107,11 @@
#define FUSE_CAP_EXPORT_SUPPORT (1 << 4)
#define FUSE_CAP_BIG_WRITES (1 << 5)
#define FUSE_CAP_DONT_MASK (1 << 6)
+#define FUSE_CAP_SPLICE_WRITE (1 << 7)
+#define FUSE_CAP_SPLICE_MOVE (1 << 8)
+#define FUSE_CAP_SPLICE_READ (1 << 9)
+#define FUSE_CAP_FLOCK_LOCKS (1 << 10)
+#define FUSE_CAP_IOCTL_DIR (1 << 11)
/**
* Ioctl flags
@@ -104,12 +119,14 @@
* FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine
* FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed
* FUSE_IOCTL_RETRY: retry with new iovecs
+ * FUSE_IOCTL_DIR: is a directory
*
* FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs
*/
#define FUSE_IOCTL_COMPAT (1 << 0)
#define FUSE_IOCTL_UNRESTRICTED (1 << 1)
#define FUSE_IOCTL_RETRY (1 << 2)
+#define FUSE_IOCTL_DIR (1 << 4)
#define FUSE_IOCTL_MAX_IOV 256
@@ -157,9 +174,19 @@
unsigned want;
/**
+ * Maximum number of backgrounded requests
+ */
+ unsigned max_background;
+
+ /**
+ * Kernel congestion threshold parameter
+ */
+ unsigned congestion_threshold;
+
+ /**
* For future use.
*/
- unsigned reserved[25];
+ unsigned reserved[23];
};
struct fuse_session;
@@ -233,6 +260,186 @@
void fuse_pollhandle_destroy(struct fuse_pollhandle *ph);
/* ----------------------------------------------------------- *
+ * Data buffer *
+ * ----------------------------------------------------------- */
+
+/**
+ * Buffer flags
+ */
+enum fuse_buf_flags {
+ /**
+ * Buffer contains a file descriptor
+ *
+ * If this flag is set, the .fd field is valid, otherwise the
+ * .mem fields is valid.
+ */
+ FUSE_BUF_IS_FD = (1 << 1),
+
+ /**
+ * Seek on the file descriptor
+ *
+ * If this flag is set then the .pos field is valid and is
+ * used to seek to the given offset before performing
+ * operation on file descriptor.
+ */
+ FUSE_BUF_FD_SEEK = (1 << 2),
+
+ /**
+ * Retry operation on file descriptor
+ *
+ * If this flag is set then retry operation on file descriptor
+ * until .size bytes have been copied or an error or EOF is
+ * detected.
+ */
+ FUSE_BUF_FD_RETRY = (1 << 3),
+};
+
+/**
+ * Buffer copy flags
+ */
+enum fuse_buf_copy_flags {
+ /**
+ * Don't use splice(2)
+ *
+ * Always fall back to using read and write instead of
+ * splice(2) to copy data from one file descriptor to another.
+ *
+ * If this flag is not set, then only fall back if splice is
+ * unavailable.
+ */
+ FUSE_BUF_NO_SPLICE = (1 << 1),
+
+ /**
+ * Force splice
+ *
+ * Always use splice(2) to copy data from one file descriptor
+ * to another. If splice is not available, return -EINVAL.
+ */
+ FUSE_BUF_FORCE_SPLICE = (1 << 2),
+
+ /**
+ * Try to move data with splice.
+ *
+ * If splice is used, try to move pages from the source to the
+ * destination instead of copying. See documentation of
+ * SPLICE_F_MOVE in splice(2) man page.
+ */
+ FUSE_BUF_SPLICE_MOVE = (1 << 3),
+
+ /**
+ * Don't block on the pipe when copying data with splice
+ *
+ * Makes the operations on the pipe non-blocking (if the pipe
+ * is full or empty). See SPLICE_F_NONBLOCK in the splice(2)
+ * man page.
+ */
+ FUSE_BUF_SPLICE_NONBLOCK= (1 << 4),
+};
+
+/**
+ * Single data buffer
+ *
+ * Generic data buffer for I/O, extended attributes, etc... Data may
+ * be supplied as a memory pointer or as a file descriptor
+ */
+struct fuse_buf {
+ /**
+ * Size of data in bytes
+ */
+ size_t size;
+
+ /**
+ * Buffer flags
+ */
+ enum fuse_buf_flags flags;
+
+ /**
+ * Memory pointer
+ *
+ * Used unless FUSE_BUF_IS_FD flag is set.
+ */
+ void *mem;
+
+ /**
+ * File descriptor
+ *
+ * Used if FUSE_BUF_IS_FD flag is set.
+ */
+ int fd;
+
+ /**
+ * File position
+ *
+ * Used if FUSE_BUF_FD_SEEK flag is set.
+ */
+ off64_t pos;
+};
+
+/**
+ * Data buffer vector
+ *
+ * An array of data buffers, each containing a memory pointer or a
+ * file descriptor.
+ *
+ * Allocate dynamically to add more than one buffer.
+ */
+struct fuse_bufvec {
+ /**
+ * Number of buffers in the array
+ */
+ size_t count;
+
+ /**
+ * Index of current buffer within the array
+ */
+ size_t idx;
+
+ /**
+ * Current offset within the current buffer
+ */
+ size_t off;
+
+ /**
+ * Array of buffers
+ */
+ struct fuse_buf buf[1];
+};
+
+/* Initialize bufvec with a single buffer of given size */
+#define FUSE_BUFVEC_INIT(size__) \
+ ((struct fuse_bufvec) { \
+ /* .count= */ 1, \
+ /* .idx = */ 0, \
+ /* .off = */ 0, \
+ /* .buf = */ { /* [0] = */ { \
+ /* .size = */ (size__), \
+ /* .flags = */ (enum fuse_buf_flags) 0, \
+ /* .mem = */ NULL, \
+ /* .fd = */ -1, \
+ /* .pos = */ 0, \
+ } } \
+ } )
+
+/**
+ * Get total size of data in a fuse buffer vector
+ *
+ * @param bufv buffer vector
+ * @return size of data
+ */
+size_t fuse_buf_size(const struct fuse_bufvec *bufv);
+
+/**
+ * Copy data from one buffer vector to another
+ *
+ * @param dst destination buffer vector
+ * @param src source buffer vector
+ * @param flags flags controlling the copy
+ * @return actual number of bytes copied or -errno on error
+ */
+ssize_t fuse_buf_copy(struct fuse_bufvec *dst, struct fuse_bufvec *src,
+ enum fuse_buf_copy_flags flags);
+
+/* ----------------------------------------------------------- *
* Signal handling *
* ----------------------------------------------------------- */