diff --git a/Android.mk b/Android.mk
index e89b225..5f74064 100644
--- a/Android.mk
+++ b/Android.mk
@@ -9,7 +9,6 @@
 LOCAL_SRC_FILES := \
     recovery.c \
     bootloader.c \
-    firmware.c \
     install.c \
     roots.c \
     ui.c \
@@ -22,7 +21,7 @@
 
 LOCAL_FORCE_STATIC_EXECUTABLE := true
 
-RECOVERY_API_VERSION := 2
+RECOVERY_API_VERSION := 3
 LOCAL_CFLAGS += -DRECOVERY_API_VERSION=$(RECOVERY_API_VERSION)
 
 # This binary is in the recovery ramdisk, which is otherwise a copy of root.
diff --git a/bootloader.c b/bootloader.c
index 61b24e9..38b5651 100644
--- a/bootloader.c
+++ b/bootloader.c
@@ -119,252 +119,3 @@
     LOGI("Set boot command \"%s\"\n", in->command[0] != 255 ? in->command : "");
     return 0;
 }
-
-/* Update Image
- *
- * - will be stored in the "cache" partition
- * - bad blocks will be ignored, like boot.img and recovery.img
- * - the first block will be the image header (described below)
- * - the size is in BYTES, inclusive of the header
- * - offsets are in BYTES from the start of the update header
- * - two raw bitmaps will be included, the "busy" and "fail" bitmaps
- * - for dream, the bitmaps will be 320x480x16bpp RGB565
- */
-
-#define UPDATE_MAGIC       "MSM-RADIO-UPDATE"
-#define UPDATE_MAGIC_SIZE  16
-#define UPDATE_VERSION     0x00010000
-
-struct update_header {
-    unsigned char MAGIC[UPDATE_MAGIC_SIZE];
-
-    unsigned version;
-    unsigned size;
-
-    unsigned image_offset;
-    unsigned image_length;
-
-    unsigned bitmap_width;
-    unsigned bitmap_height;
-    unsigned bitmap_bpp;
-
-    unsigned busy_bitmap_offset;
-    unsigned busy_bitmap_length;
-
-    unsigned fail_bitmap_offset;
-    unsigned fail_bitmap_length;
-};
-
-#define LOG_MAGIC        "LOGmagic"
-#define LOG_MAGIC_SIZE   8
-
-int write_update_for_bootloader(
-        const char *update, int update_length,
-        int bitmap_width, int bitmap_height, int bitmap_bpp,
-        const char *busy_bitmap, const char *fail_bitmap,
-        const char *log_filename) {
-    if (ensure_root_path_unmounted(CACHE_NAME)) {
-        LOGE("Can't unmount %s\n", CACHE_NAME);
-        return -1;
-    }
-
-    const MtdPartition *part = get_root_mtd_partition(CACHE_NAME);
-    if (part == NULL) {
-        LOGE("Can't find %s\n", CACHE_NAME);
-        return -1;
-    }
-
-    MtdWriteContext *write = mtd_write_partition(part);
-    if (write == NULL) {
-        LOGE("Can't open %s\n(%s)\n", CACHE_NAME, strerror(errno));
-        return -1;
-    }
-
-    /* Write an invalid (zero) header first, to disable any previous
-     * update and any other structured contents (like a filesystem),
-     * and as a placeholder for the amount of space required.
-     */
-
-    struct update_header header;
-    memset(&header, 0, sizeof(header));
-    const ssize_t header_size = sizeof(header);
-    if (mtd_write_data(write, (char*) &header, header_size) != header_size) {
-        LOGE("Can't write header to %s\n(%s)\n", CACHE_NAME, strerror(errno));
-        mtd_write_close(write);
-        return -1;
-    }
-
-    /* Write each section individually block-aligned, so we can write
-     * each block independently without complicated buffering.
-     */
-
-    memcpy(&header.MAGIC, UPDATE_MAGIC, UPDATE_MAGIC_SIZE);
-    header.version = UPDATE_VERSION;
-    header.size = header_size;
-
-    if (log_filename != NULL) {
-        // Write 1 byte into the following block, then fill to the end
-        // in order to reserve that block.  We'll use the block to
-        // send a copy of the log through to the next invocation of
-        // recovery.  We write the log as late as possible in order to
-        // capture any messages emitted by this function.
-        mtd_erase_blocks(write, 0);
-        if (mtd_write_data(write, (char*) &header, 1) != 1) {
-            LOGE("Can't write log block to %s\n(%s)\n",
-                 CACHE_NAME, strerror(errno));
-            mtd_write_close(write);
-            return -1;
-        }
-    }
-
-    off_t image_start_pos = mtd_erase_blocks(write, 0);
-    header.image_length = update_length;
-    if ((int) header.image_offset == -1 ||
-        mtd_write_data(write, update, update_length) != update_length) {
-        LOGE("Can't write update to %s\n(%s)\n", CACHE_NAME, strerror(errno));
-        mtd_write_close(write);
-        return -1;
-    }
-    off_t busy_start_pos = mtd_erase_blocks(write, 0);
-    header.image_offset = mtd_find_write_start(write, image_start_pos);
-
-    header.bitmap_width = bitmap_width;
-    header.bitmap_height = bitmap_height;
-    header.bitmap_bpp = bitmap_bpp;
-
-    int bitmap_length = (bitmap_bpp + 7) / 8 * bitmap_width * bitmap_height;
-
-    header.busy_bitmap_length = busy_bitmap != NULL ? bitmap_length : 0;
-    if ((int) header.busy_bitmap_offset == -1 ||
-        mtd_write_data(write, busy_bitmap, bitmap_length) != bitmap_length) {
-        LOGE("Can't write bitmap to %s\n(%s)\n", CACHE_NAME, strerror(errno));
-        mtd_write_close(write);
-        return -1;
-    }
-    off_t fail_start_pos = mtd_erase_blocks(write, 0);
-    header.busy_bitmap_offset = mtd_find_write_start(write, busy_start_pos);
-
-    header.fail_bitmap_length = fail_bitmap != NULL ? bitmap_length : 0;
-    if ((int) header.fail_bitmap_offset == -1 ||
-        mtd_write_data(write, fail_bitmap, bitmap_length) != bitmap_length) {
-        LOGE("Can't write bitmap to %s\n(%s)\n", CACHE_NAME, strerror(errno));
-        mtd_write_close(write);
-        return -1;
-    }
-    mtd_erase_blocks(write, 0);
-    header.fail_bitmap_offset = mtd_find_write_start(write, fail_start_pos);
-
-    /* Write the header last, after all the blocks it refers to, so that
-     * when the magic number is installed everything is valid.
-     */
-
-    if (mtd_write_close(write)) {
-        LOGE("Can't finish writing %s\n(%s)\n", CACHE_NAME, strerror(errno));
-        return -1;
-    }
-
-    write = mtd_write_partition(part);
-    if (write == NULL) {
-        LOGE("Can't reopen %s\n(%s)\n", CACHE_NAME, strerror(errno));
-        return -1;
-    }
-
-    if (mtd_write_data(write, (char*) &header, header_size) != header_size) {
-        LOGE("Can't rewrite header to %s\n(%s)\n", CACHE_NAME, strerror(errno));
-        mtd_write_close(write);
-        return -1;
-    }
-
-    if (log_filename != NULL) {
-        size_t erase_size;
-        if (mtd_partition_info(part, NULL, &erase_size, NULL) != 0) {
-            LOGE("Error reading block size\n(%s)\n", strerror(errno));
-            mtd_write_close(write);
-            return -1;
-        }
-        mtd_erase_blocks(write, 0);
-
-        if (erase_size > 0) {
-            char* log = malloc(erase_size);
-            FILE* f = fopen(log_filename, "rb");
-            // The fseek() may fail if it tries to go before the
-            // beginning of the log, but that's okay because we want
-            // to be positioned at the start anyway.
-            fseek(f, -(erase_size-sizeof(size_t)-LOG_MAGIC_SIZE), SEEK_END);
-            memcpy(log, LOG_MAGIC, LOG_MAGIC_SIZE);
-            size_t read = fread(log+sizeof(size_t)+LOG_MAGIC_SIZE,
-                                1, erase_size-sizeof(size_t)-LOG_MAGIC_SIZE, f);
-            LOGI("read %d bytes from log\n", (int)read);
-            *(size_t *)(log + LOG_MAGIC_SIZE) = read;
-            fclose(f);
-            if (mtd_write_data(write, log, erase_size) != erase_size) {
-                LOGE("failed to store log in cache partition\n(%s)\n",
-                     strerror(errno));
-                mtd_write_close(write);
-            }
-            free(log);
-        }
-    }
-
-    if (mtd_erase_blocks(write, 0) != image_start_pos) {
-        LOGE("Misalignment rewriting %s\n(%s)\n", CACHE_NAME, strerror(errno));
-        mtd_write_close(write);
-        return -1;
-    }
-
-    if (mtd_write_close(write)) {
-        LOGE("Can't finish header of %s\n(%s)\n", CACHE_NAME, strerror(errno));
-        return -1;
-    }
-
-    return 0;
-}
-
-void recover_firmware_update_log() {
-    printf("recovering log from before firmware update\n");
-
-    const MtdPartition *part = get_root_mtd_partition(CACHE_NAME);
-    if (part == NULL) {
-        LOGE("Can't find %s\n", CACHE_NAME);
-        return;
-    }
-
-    MtdReadContext* read = mtd_read_partition(part);
-
-    size_t erase_size;
-    if (mtd_partition_info(part, NULL, &erase_size, NULL) != 0) {
-        LOGE("Error reading block size\n(%s)\n", strerror(errno));
-        mtd_read_close(read);
-        return;
-    }
-
-    char* buffer = malloc(erase_size);
-    if (mtd_read_data(read, buffer, erase_size) != erase_size) {
-        LOGE("Error reading header block\n(%s)\n", strerror(errno));
-        mtd_read_close(read);
-        free(buffer);
-        return;
-    }
-    if (mtd_read_data(read, buffer, erase_size) != erase_size) {
-        LOGE("Error reading log block\n(%s)\n", strerror(errno));
-        mtd_read_close(read);
-        free(buffer);
-        return;
-    }
-    mtd_read_close(read);
-
-    if (memcmp(buffer, LOG_MAGIC, LOG_MAGIC_SIZE) != 0) {
-        LOGE("No log from before firmware install\n");
-        free(buffer);
-        return;
-    }
-
-    size_t log_size = *(size_t *)(buffer + LOG_MAGIC_SIZE);
-    LOGI("header has %d bytes of log\n", (int)log_size);
-
-    printf("\n###\n### START RECOVERED LOG\n###\n\n");
-    fwrite(buffer + sizeof(size_t) + LOG_MAGIC_SIZE, 1, log_size, stdout);
-    printf("\n\n###\n### END RECOVERED LOG\n###\n\n");
-
-    free(buffer);
-}
diff --git a/bootloader.h b/bootloader.h
index fec6409..2e749aa 100644
--- a/bootloader.h
+++ b/bootloader.h
@@ -47,20 +47,4 @@
 int get_bootloader_message(struct bootloader_message *out);
 int set_bootloader_message(const struct bootloader_message *in);
 
-/* Write an update to the cache partition for update-radio or update-hboot.
- * Note, this destroys any filesystem on the cache partition!
- * The expected bitmap format is 240x320, 16bpp (2Bpp), RGB 5:6:5.
- */
-int write_update_for_bootloader(
-        const char *update, int update_len,
-        int bitmap_width, int bitmap_height, int bitmap_bpp,
-        const char *busy_bitmap, const char *error_bitmap,
-        const char *log_filename);
-
-/* Look for a log stored in the cache partition in the block after the
- * firmware update header.  If we can read such a log, copy it to
- * stdout (ie, the current log).
- */
-void recover_firmware_update_log();
-
 #endif
diff --git a/common.h b/common.h
index d962a0a..ff577c2 100644
--- a/common.h
+++ b/common.h
@@ -49,17 +49,10 @@
   BACKGROUND_ICON_NONE,
   BACKGROUND_ICON_INSTALLING,
   BACKGROUND_ICON_ERROR,
-  BACKGROUND_ICON_FIRMWARE_INSTALLING,
-  BACKGROUND_ICON_FIRMWARE_ERROR,
   NUM_BACKGROUND_ICONS
 };
 void ui_set_background(int icon);
 
-// Get a malloc'd copy of the screen image showing (only) the specified icon.
-// Also returns the width, height, and bits per pixel of the returned image.
-// TODO: Use some sort of "struct Bitmap" here instead of all these variables?
-char *ui_copy_image(int icon, int *width, int *height, int *bpp);
-
 // Show a progress bar and define the scope of the next operation:
 //   portion - fraction of the progress bar the next operation will use
 //   seconds - expected time interval (progress bar moves at this minimum rate)
diff --git a/firmware.c b/firmware.c
deleted file mode 100644
index 4c1a9a4..0000000
--- a/firmware.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "bootloader.h"
-#include "common.h"
-#include "firmware.h"
-#include "roots.h"
-
-#include <errno.h>
-#include <string.h>
-#include <sys/reboot.h>
-
-static const char *update_type = NULL;
-static const char *update_data = NULL;
-static int update_length = 0;
-
-int remember_firmware_update(const char *type, const char *data, int length) {
-    if (update_type != NULL || update_data != NULL) {
-        LOGE("Multiple firmware images\n");
-        return -1;
-    }
-
-    update_type = type;
-    update_data = data;
-    update_length = length;
-    return 0;
-}
-
-// Return true if there is a firmware update pending.
-int firmware_update_pending() {
-  return update_data != NULL && update_length > 0;
-}
-
-/* Bootloader / Recovery Flow
- *
- * On every boot, the bootloader will read the bootloader_message
- * from flash and check the command field.  The bootloader should
- * deal with the command field not having a 0 terminator correctly
- * (so as to not crash if the block is invalid or corrupt).
- *
- * The bootloader will have to publish the partition that contains
- * the bootloader_message to the linux kernel so it can update it.
- *
- * if command == "boot-recovery" -> boot recovery.img
- * else if command == "update-radio" -> update radio image (below)
- * else if command == "update-hboot" -> update hboot image (below)
- * else -> boot boot.img (normal boot)
- *
- * Radio/Hboot Update Flow
- * 1. the bootloader will attempt to load and validate the header
- * 2. if the header is invalid, status="invalid-update", goto #8
- * 3. display the busy image on-screen
- * 4. if the update image is invalid, status="invalid-radio-image", goto #8
- * 5. attempt to update the firmware (depending on the command)
- * 6. if successful, status="okay", goto #8
- * 7. if failed, and the old image can still boot, status="failed-update"
- * 8. write the bootloader_message, leaving the recovery field
- *    unchanged, updating status, and setting command to
- *    "boot-recovery"
- * 9. reboot
- *
- * The bootloader will not modify or erase the cache partition.
- * It is recovery's responsibility to clean up the mess afterwards.
- */
-
-int maybe_install_firmware_update(const char *send_intent,
-                                  const char *log_filename) {
-    if (update_data == NULL || update_length == 0) return 0;
-
-    /* We destroy the cache partition to pass the update image to the
-     * bootloader, so all we can really do afterwards is wipe cache and reboot.
-     * Set up this instruction now, in case we're interrupted while writing.
-     */
-
-    struct bootloader_message boot;
-    memset(&boot, 0, sizeof(boot));
-    strlcpy(boot.command, "boot-recovery", sizeof(boot.command));
-    strlcpy(boot.recovery, "recovery\n--wipe_cache\n", sizeof(boot.command));
-    if (send_intent != NULL) {
-        strlcat(boot.recovery, "--send_intent=", sizeof(boot.recovery));
-        strlcat(boot.recovery, send_intent, sizeof(boot.recovery));
-        strlcat(boot.recovery, "\n", sizeof(boot.recovery));
-    }
-    if (set_bootloader_message(&boot)) return -1;
-
-    int width = 0, height = 0, bpp = 0;
-    char *busy_image = ui_copy_image(
-        BACKGROUND_ICON_FIRMWARE_INSTALLING, &width, &height, &bpp);
-    char *fail_image = ui_copy_image(
-        BACKGROUND_ICON_FIRMWARE_ERROR, &width, &height, &bpp);
-
-    ui_print("Writing %s image...\n", update_type);
-    if (write_update_for_bootloader(
-            update_data, update_length,
-            width, height, bpp, busy_image, fail_image, log_filename)) {
-        LOGE("Can't write %s image\n(%s)\n", update_type, strerror(errno));
-        format_root_device("CACHE:");  // Attempt to clean cache up, at least.
-        return -1;
-    }
-
-    free(busy_image);
-    free(fail_image);
-
-    /* The update image is fully written, so now we can instruct the bootloader
-     * to install it.  (After doing so, it will come back here, and we will
-     * wipe the cache and reboot into the system.)
-     */
-    snprintf(boot.command, sizeof(boot.command), "update-%s", update_type);
-    if (set_bootloader_message(&boot)) {
-        format_root_device("CACHE:");
-        return -1;
-    }
-
-    reboot(RB_AUTOBOOT);
-
-    // Can't reboot?  WTF?
-    LOGE("Can't reboot\n");
-    return -1;
-}
diff --git a/firmware.h b/firmware.h
deleted file mode 100644
index 04507bb..0000000
--- a/firmware.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef _RECOVERY_FIRMWARE_H
-#define _RECOVERY_FIRMWARE_H
-
-/* Save a radio or bootloader update image for later installation.
- * The type should be one of "hboot" or "radio".
- * Takes ownership of type and data.  Returns nonzero on error.
- */
-int remember_firmware_update(const char *type, const char *data, int length);
-
-/* Returns true if a firmware update has been saved. */
-int firmware_update_pending();
-
-/* If an update was saved, reboot into the bootloader now to install it.
- * Returns 0 if no radio image was defined, nonzero on error,
- * doesn't return at all on success...
- */
-int maybe_install_firmware_update(const char *send_intent,
-                                  const char *log_filename);
-
-#endif
diff --git a/install.c b/install.c
index bb9924a..37a4f07 100644
--- a/install.c
+++ b/install.c
@@ -32,71 +32,10 @@
 #include "mtdutils/mtdutils.h"
 #include "roots.h"
 #include "verifier.h"
-#include "firmware.h"
 
 #define ASSUMED_UPDATE_BINARY_NAME  "META-INF/com/google/android/update-binary"
 #define PUBLIC_KEYS_FILE "/res/keys"
 
-// The update binary ask us to install a firmware file on reboot.  Set
-// that up.  Takes ownership of type and filename.
-static int
-handle_firmware_update(char* type, char* filename, ZipArchive* zip) {
-    unsigned int data_size;
-    const ZipEntry* entry = NULL;
-
-    if (strncmp(filename, "PACKAGE:", 8) == 0) {
-        entry = mzFindZipEntry(zip, filename+8);
-        if (entry == NULL) {
-            LOGE("Failed to find \"%s\" in package", filename+8);
-            return INSTALL_ERROR;
-        }
-        data_size = entry->uncompLen;
-    } else {
-        struct stat st_data;
-        if (stat(filename, &st_data) < 0) {
-            LOGE("Error stat'ing %s: %s\n", filename, strerror(errno));
-            return INSTALL_ERROR;
-        }
-        data_size = st_data.st_size;
-    }
-
-    LOGI("type is %s; size is %d; file is %s\n",
-         type, data_size, filename);
-
-    char* data = malloc(data_size);
-    if (data == NULL) {
-        LOGI("Can't allocate %d bytes for firmware data\n", data_size);
-        return INSTALL_ERROR;
-    }
-
-    if (entry) {
-        if (mzReadZipEntry(zip, entry, data, data_size) == false) {
-            LOGE("Failed to read \"%s\" from package", filename+8);
-            return INSTALL_ERROR;
-        }
-    } else {
-        FILE* f = fopen(filename, "rb");
-        if (f == NULL) {
-            LOGE("Failed to open %s: %s\n", filename, strerror(errno));
-            return INSTALL_ERROR;
-        }
-        if (fread(data, 1, data_size, f) != data_size) {
-            LOGE("Failed to read firmware data: %s\n", strerror(errno));
-            return INSTALL_ERROR;
-        }
-        fclose(f);
-    }
-
-    if (remember_firmware_update(type, data, data_size)) {
-        LOGE("Can't store %s image\n", type);
-        free(data);
-        return INSTALL_ERROR;
-    }
-    free(filename);
-
-    return INSTALL_SUCCESS;
-}
-
 // If the package contains an update binary, extract it and run it.
 static int
 try_update_binary(const char *path, ZipArchive *zip) {
@@ -145,9 +84,12 @@
     //
     //        firmware <"hboot"|"radio"> <filename>
     //            arrange to install the contents of <filename> in the
-    //            given partition on reboot.  (API v2: <filename> may
-    //            start with "PACKAGE:" to indicate taking a file from
-    //            the OTA package.)
+    //            given partition on reboot.
+    //
+    //            (API v2: <filename> may start with "PACKAGE:" to
+    //            indicate taking a file from the OTA package.)
+    //
+    //            (API v3: this command no longer exists.)
     //
     //        ui_print <string>
     //            display <string> on the screen.
@@ -172,9 +114,6 @@
     }
     close(pipefd[1]);
 
-    char* firmware_type = NULL;
-    char* firmware_filename = NULL;
-
     char buffer[1024];
     FILE* from_child = fdopen(pipefd[0], "r");
     while (fgets(buffer, sizeof(buffer), from_child) != NULL) {
@@ -194,18 +133,6 @@
             char* fraction_s = strtok(NULL, " \n");
             float fraction = strtof(fraction_s, NULL);
             ui_set_progress(fraction);
-        } else if (strcmp(command, "firmware") == 0) {
-            char* type = strtok(NULL, " \n");
-            char* filename = strtok(NULL, " \n");
-
-            if (type != NULL && filename != NULL) {
-                if (firmware_type != NULL) {
-                    LOGE("ignoring attempt to do multiple firmware updates");
-                } else {
-                    firmware_type = strdup(type);
-                    firmware_filename = strdup(filename);
-                }
-            }
         } else if (strcmp(command, "ui_print") == 0) {
             char* str = strtok(NULL, "\n");
             if (str) {
@@ -226,11 +153,7 @@
         return INSTALL_ERROR;
     }
 
-    if (firmware_type != NULL) {
-        return handle_firmware_update(firmware_type, firmware_filename, zip);
-    } else {
-        return INSTALL_SUCCESS;
-    }
+    return INSTALL_SUCCESS;
 }
 
 static int
diff --git a/recovery.c b/recovery.c
index 73a54a2..4c437e5 100644
--- a/recovery.c
+++ b/recovery.c
@@ -31,7 +31,6 @@
 #include "bootloader.h"
 #include "common.h"
 #include "cutils/properties.h"
-#include "firmware.h"
 #include "install.h"
 #include "minui/minui.h"
 #include "minzip/DirUtil.h"
@@ -445,12 +444,7 @@
                 } else if (!ui_text_visible()) {
                     return;  // reboot if logs aren't visible
                 } else {
-                    if (firmware_update_pending()) {
-                        ui_print("\nReboot via menu to complete\n"
-                                 "installation.\n");
-                    } else {
-                        ui_print("\nInstall from sdcard complete.\n");
-                    }
+                    ui_print("\nInstall from sdcard complete.\n");
                 }
                 break;
         }
@@ -563,9 +557,6 @@
     if (status != INSTALL_SUCCESS) ui_set_background(BACKGROUND_ICON_ERROR);
     if (status != INSTALL_SUCCESS || ui_text_visible()) prompt_and_wait();
 
-    // If there is a radio image pending, reboot now to install it.
-    maybe_install_firmware_update(send_intent, TEMPORARY_LOG_FILE);
-
     // Otherwise, get ready to boot the main system...
     finish_recovery(send_intent);
     ui_print("Rebooting...\n");
diff --git a/res/images/icon_firmware_error.png b/res/images/icon_firmware_error.png
deleted file mode 100644
index 0c32c9e..0000000
--- a/res/images/icon_firmware_error.png
+++ /dev/null
Binary files differ
diff --git a/res/images/icon_firmware_install.png b/res/images/icon_firmware_install.png
deleted file mode 100755
index 2da9e5f..0000000
--- a/res/images/icon_firmware_install.png
+++ /dev/null
Binary files differ
diff --git a/ui.c b/ui.c
index fdc0991..01a005f 100644
--- a/ui.c
+++ b/ui.c
@@ -47,10 +47,6 @@
 static const struct { gr_surface* surface; const char *name; } BITMAPS[] = {
     { &gBackgroundIcon[BACKGROUND_ICON_INSTALLING], "icon_installing" },
     { &gBackgroundIcon[BACKGROUND_ICON_ERROR],      "icon_error" },
-    { &gBackgroundIcon[BACKGROUND_ICON_FIRMWARE_INSTALLING],
-        "icon_firmware_install" },
-    { &gBackgroundIcon[BACKGROUND_ICON_FIRMWARE_ERROR],
-        "icon_firmware_error" },
     { &gProgressBarIndeterminate[0],    "indeterminate1" },
     { &gProgressBarIndeterminate[1],    "indeterminate2" },
     { &gProgressBarIndeterminate[2],    "indeterminate3" },
@@ -341,23 +337,6 @@
     pthread_create(&t, NULL, input_thread, NULL);
 }
 
-char *ui_copy_image(int icon, int *width, int *height, int *bpp) {
-    pthread_mutex_lock(&gUpdateMutex);
-    draw_background_locked(gBackgroundIcon[icon]);
-    *width = gr_fb_width();
-    *height = gr_fb_height();
-    *bpp = sizeof(gr_pixel) * 8;
-    int size = *width * *height * sizeof(gr_pixel);
-    char *ret = malloc(size);
-    if (ret == NULL) {
-        LOGE("Can't allocate %d bytes for image\n", size);
-    } else {
-        memcpy(ret, gr_fb_data(), size);
-    }
-    pthread_mutex_unlock(&gUpdateMutex);
-    return ret;
-}
-
 void ui_set_background(int icon)
 {
     pthread_mutex_lock(&gUpdateMutex);
diff --git a/updater/install.c b/updater/install.c
index 934acaa..852b393 100644
--- a/updater/install.c
+++ b/updater/install.c
@@ -703,44 +703,6 @@
     return result;
 }
 
-// write_firmware_image(file, partition)
-//
-//    partition is "radio" or "hboot"
-//    file is not used until after updater exits
-//
-// TODO: this should live in some HTC-specific library
-char* WriteFirmwareImageFn(const char* name, State* state,
-                           int argc, Expr* argv[]) {
-    char* result = NULL;
-
-    char* partition;
-    char* filename;
-    if (ReadArgs(state, argv, 2, &filename, &partition) < 0) {
-        return NULL;
-    }
-
-    if (strlen(partition) == 0) {
-        ErrorAbort(state, "partition argument to %s can't be empty", name);
-        goto done;
-    }
-    if (strlen(filename) == 0) {
-        ErrorAbort(state, "file argument to %s can't be empty", name);
-        goto done;
-    }
-
-    FILE* cmd = ((UpdaterInfo*)(state->cookie))->cmd_pipe;
-    fprintf(cmd, "firmware %s %s\n", partition, filename);
-
-    printf("will write %s firmware from %s\n", partition, filename);
-    result = partition;
-
-done:
-    if (result != partition) free(partition);
-    free(filename);
-    return result;
-}
-
-
 extern int applypatch(int argc, char** argv);
 
 // apply_patch(srcfile, tgtfile, tgtsha1, tgtsize, sha1:patch, ...)
@@ -888,7 +850,6 @@
     RegisterFunction("getprop", GetPropFn);
     RegisterFunction("file_getprop", FileGetPropFn);
     RegisterFunction("write_raw_image", WriteRawImageFn);
-    RegisterFunction("write_firmware_image", WriteFirmwareImageFn);
 
     RegisterFunction("apply_patch", ApplyPatchFn);
     RegisterFunction("apply_patch_check", ApplyPatchFn);
diff --git a/updater/updater.c b/updater/updater.c
index 1aa277c..2d16dee 100644
--- a/updater/updater.c
+++ b/updater/updater.c
@@ -39,9 +39,11 @@
     }
 
     char* version = argv[1];
-    if ((version[0] != '1' && version[0] != '2') || version[1] != '\0') {
-        // We support version "1" or "2".
-        fprintf(stderr, "wrong updater binary API; expected 1 or 2, got %s\n",
+    if ((version[0] != '1' && version[0] != '2' && version[0] != '3') ||
+        version[1] != '\0') {
+        // We support version 1, 2, or 3.
+        fprintf(stderr, "wrong updater binary API; expected 1, 2, or 3; "
+                        "got %s\n",
                 argv[1]);
         return 2;
     }
@@ -100,6 +102,7 @@
     UpdaterInfo updater_info;
     updater_info.cmd_pipe = cmd_pipe;
     updater_info.package_zip = &za;
+    updater_info.version = atoi(version);
 
     State state;
     state.cookie = &updater_info;
diff --git a/updater/updater.h b/updater/updater.h
index 22fbfd2..bd60dc1 100644
--- a/updater/updater.h
+++ b/updater/updater.h
@@ -23,6 +23,7 @@
 typedef struct {
     FILE* cmd_pipe;
     ZipArchive* package_zip;
+    int version;
 } UpdaterInfo;
 
 #endif