blob: a95299ea7e48568aa6323c016c535cc2dcd9d56c [file] [log] [blame]
/*
* Copyright (C) 2018 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <dlfcn.h>
#include <errno.h>
#include <fcntl.h>
#include <getopt.h>
#include <inttypes.h>
#include <limits.h>
#include <linux/fs.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <time.h>
#include <unistd.h>
#include <atomic>
#include <string>
#include <thread>
#include <vector>
#include <android-base/file.h>
#include <android-base/logging.h>
#include <android-base/properties.h>
#include <android-base/strings.h>
#include <android-base/unique_fd.h>
#include <bootloader_message/bootloader_message.h>
#include <cutils/android_reboot.h>
#include <cutils/sockets.h>
#include <private/android_logger.h> /* private pmsg functions */
#include <selinux/android.h>
#include <selinux/label.h>
#include <selinux/selinux.h>
#include "common.h"
#include "device.h"
#include "fastboot/fastboot.h"
#include "logging.h"
#include "minadbd/minadbd.h"
#include "otautil/paths.h"
#include "otautil/sysutil.h"
#include "recovery.h"
#include "roots.h"
#include "stub_ui.h"
#include "ui.h"
static constexpr const char* COMMAND_FILE = "/cache/recovery/command";
static constexpr const char* LOCALE_FILE = "/cache/recovery/last_locale";
static constexpr const char* CACHE_ROOT = "/cache";
bool has_cache = false;
RecoveryUI* ui = nullptr;
struct selabel_handle* sehandle;
static void UiLogger(android::base::LogId /* id */, android::base::LogSeverity severity,
const char* /* tag */, const char* /* file */, unsigned int /* line */,
const char* message) {
static constexpr char log_characters[] = "VDIWEF";
if (severity >= android::base::ERROR && ui != nullptr) {
ui->Print("E:%s\n", message);
} else {
fprintf(stdout, "%c:%s\n", log_characters[severity], message);
}
}
// command line args come from, in decreasing precedence:
// - the actual command line
// - the bootloader control block (one per line, after "recovery")
// - the contents of COMMAND_FILE (one per line)
static std::vector<std::string> get_args(const int argc, char** const argv) {
CHECK_GT(argc, 0);
bootloader_message boot = {};
std::string err;
if (!read_bootloader_message(&boot, &err)) {
LOG(ERROR) << err;
// If fails, leave a zeroed bootloader_message.
boot = {};
}
stage = std::string(boot.stage);
std::string boot_command;
if (boot.command[0] != 0) {
if (memchr(boot.command, '\0', sizeof(boot.command))) {
boot_command = std::string(boot.command);
} else {
boot_command = std::string(boot.command, sizeof(boot.command));
}
LOG(INFO) << "Boot command: " << boot_command;
}
if (boot.status[0] != 0) {
std::string boot_status = std::string(boot.status, sizeof(boot.status));
LOG(INFO) << "Boot status: " << boot_status;
}
std::vector<std::string> args(argv, argv + argc);
// --- if arguments weren't supplied, look in the bootloader control block
if (args.size() == 1) {
boot.recovery[sizeof(boot.recovery) - 1] = '\0'; // Ensure termination
std::string boot_recovery(boot.recovery);
std::vector<std::string> tokens = android::base::Split(boot_recovery, "\n");
if (!tokens.empty() && tokens[0] == "recovery") {
for (auto it = tokens.begin() + 1; it != tokens.end(); it++) {
// Skip empty and '\0'-filled tokens.
if (!it->empty() && (*it)[0] != '\0') args.push_back(std::move(*it));
}
LOG(INFO) << "Got " << args.size() << " arguments from boot message";
} else if (boot.recovery[0] != 0) {
LOG(ERROR) << "Bad boot message: \"" << boot_recovery << "\"";
}
}
// --- if that doesn't work, try the command file (if we have /cache).
if (args.size() == 1 && has_cache) {
std::string content;
if (ensure_path_mounted(COMMAND_FILE) == 0 &&
android::base::ReadFileToString(COMMAND_FILE, &content)) {
std::vector<std::string> tokens = android::base::Split(content, "\n");
// All the arguments in COMMAND_FILE are needed (unlike the BCB message,
// COMMAND_FILE doesn't use filename as the first argument).
for (auto it = tokens.begin(); it != tokens.end(); it++) {
// Skip empty and '\0'-filled tokens.
if (!it->empty() && (*it)[0] != '\0') args.push_back(std::move(*it));
}
LOG(INFO) << "Got " << args.size() << " arguments from " << COMMAND_FILE;
}
}
// Write the arguments (excluding the filename in args[0]) back into the
// bootloader control block. So the device will always boot into recovery to
// finish the pending work, until finish_recovery() is called.
std::vector<std::string> options(args.cbegin() + 1, args.cend());
if (!update_bootloader_message(options, &err)) {
LOG(ERROR) << "Failed to set BCB message: " << err;
}
// Finally, if no arguments were specified, check whether we should boot
// into fastboot.
if (args.size() == 1 && boot_command == "boot-fastboot") {
args.emplace_back("--fastboot");
}
return args;
}
static std::string load_locale_from_cache() {
if (ensure_path_mounted(LOCALE_FILE) != 0) {
LOG(ERROR) << "Can't mount " << LOCALE_FILE;
return "";
}
std::string content;
if (!android::base::ReadFileToString(LOCALE_FILE, &content)) {
PLOG(ERROR) << "Can't read " << LOCALE_FILE;
return "";
}
return android::base::Trim(content);
}
static void ListenRecoverySocket(RecoveryUI* ui, std::atomic<Device::BuiltinAction>& action) {
android::base::unique_fd sock_fd(android_get_control_socket("recovery"));
if (sock_fd < 0) {
PLOG(ERROR) << "Failed to open recovery socket";
return;
}
listen(sock_fd, 4);
while (true) {
android::base::unique_fd connection_fd;
connection_fd.reset(accept(sock_fd, nullptr, nullptr));
if (connection_fd < 0) {
PLOG(ERROR) << "Failed to accept socket connection";
continue;
}
char msg;
constexpr char kSwitchToFastboot = 'f';
constexpr char kSwitchToRecovery = 'r';
ssize_t ret = TEMP_FAILURE_RETRY(read(connection_fd, &msg, sizeof(msg)));
if (ret != sizeof(msg)) {
PLOG(ERROR) << "Couldn't read from socket";
continue;
}
switch (msg) {
case kSwitchToRecovery:
action = Device::BuiltinAction::ENTER_RECOVERY;
break;
case kSwitchToFastboot:
action = Device::BuiltinAction::ENTER_FASTBOOT;
break;
default:
LOG(ERROR) << "Unrecognized char from socket " << msg;
continue;
}
ui->InterruptKey();
}
}
static void redirect_stdio(const char* filename) {
int pipefd[2];
if (pipe(pipefd) == -1) {
PLOG(ERROR) << "pipe failed";
// Fall back to traditional logging mode without timestamps. If these fail, there's not really
// anywhere to complain...
freopen(filename, "a", stdout);
setbuf(stdout, nullptr);
freopen(filename, "a", stderr);
setbuf(stderr, nullptr);
return;
}
pid_t pid = fork();
if (pid == -1) {
PLOG(ERROR) << "fork failed";
// Fall back to traditional logging mode without timestamps. If these fail, there's not really
// anywhere to complain...
freopen(filename, "a", stdout);
setbuf(stdout, nullptr);
freopen(filename, "a", stderr);
setbuf(stderr, nullptr);
return;
}
if (pid == 0) {
/// Close the unused write end.
close(pipefd[1]);
auto start = std::chrono::steady_clock::now();
// Child logger to actually write to the log file.
FILE* log_fp = fopen(filename, "ae");
if (log_fp == nullptr) {
PLOG(ERROR) << "fopen \"" << filename << "\" failed";
close(pipefd[0]);
_exit(EXIT_FAILURE);
}
FILE* pipe_fp = fdopen(pipefd[0], "r");
if (pipe_fp == nullptr) {
PLOG(ERROR) << "fdopen failed";
check_and_fclose(log_fp, filename);
close(pipefd[0]);
_exit(EXIT_FAILURE);
}
char* line = nullptr;
size_t len = 0;
while (getline(&line, &len, pipe_fp) != -1) {
auto now = std::chrono::steady_clock::now();
double duration =
std::chrono::duration_cast<std::chrono::duration<double>>(now - start).count();
if (line[0] == '\n') {
fprintf(log_fp, "[%12.6lf]\n", duration);
} else {
fprintf(log_fp, "[%12.6lf] %s", duration, line);
}
fflush(log_fp);
}
PLOG(ERROR) << "getline failed";
free(line);
check_and_fclose(log_fp, filename);
close(pipefd[0]);
_exit(EXIT_FAILURE);
} else {
// Redirect stdout/stderr to the logger process. Close the unused read end.
close(pipefd[0]);
setbuf(stdout, nullptr);
setbuf(stderr, nullptr);
if (dup2(pipefd[1], STDOUT_FILENO) == -1) {
PLOG(ERROR) << "dup2 stdout failed";
}
if (dup2(pipefd[1], STDERR_FILENO) == -1) {
PLOG(ERROR) << "dup2 stderr failed";
}
close(pipefd[1]);
}
}
int main(int argc, char** argv) {
// We don't have logcat yet under recovery; so we'll print error on screen and log to stdout
// (which is redirected to recovery.log) as we used to do.
android::base::InitLogging(argv, &UiLogger);
// Take last pmsg contents and rewrite it to the current pmsg session.
static constexpr const char filter[] = "recovery/";
// Do we need to rotate?
bool do_rotate = false;
__android_log_pmsg_file_read(LOG_ID_SYSTEM, ANDROID_LOG_INFO, filter, logbasename, &do_rotate);
// Take action to refresh pmsg contents
__android_log_pmsg_file_read(LOG_ID_SYSTEM, ANDROID_LOG_INFO, filter, logrotate, &do_rotate);
// If this binary is started with the single argument "--adbd", instead of being the normal
// recovery binary, it turns into kind of a stripped-down version of adbd that only supports the
// 'sideload' command. Note this must be a real argument, not anything in the command file or
// bootloader control block; the only way recovery should be run with this argument is when it
// starts a copy of itself from the apply_from_adb() function.
if (argc == 2 && strcmp(argv[1], "--adbd") == 0) {
minadbd_main();
return 0;
}
time_t start = time(nullptr);
// redirect_stdio should be called only in non-sideload mode. Otherwise we may have two logger
// instances with different timestamps.
redirect_stdio(Paths::Get().temporary_log_file().c_str());
load_volume_table();
has_cache = volume_for_mount_point(CACHE_ROOT) != nullptr;
std::vector<std::string> args = get_args(argc, argv);
auto args_to_parse = StringVectorToNullTerminatedArray(args);
static constexpr struct option OPTIONS[] = {
{ "fastboot", no_argument, nullptr, 0 },
{ "locale", required_argument, nullptr, 0 },
{ "show_text", no_argument, nullptr, 't' },
{ nullptr, 0, nullptr, 0 },
};
bool show_text = false;
bool fastboot = false;
std::string locale;
int arg;
int option_index;
while ((arg = getopt_long(args_to_parse.size() - 1, args_to_parse.data(), "", OPTIONS,
&option_index)) != -1) {
switch (arg) {
case 't':
show_text = true;
break;
case 0: {
std::string option = OPTIONS[option_index].name;
if (option == "locale") {
locale = optarg;
} else if (option == "fastboot" &&
android::base::GetBoolProperty("ro.boot.dynamic_partitions", false)) {
fastboot = true;
}
break;
}
}
}
optind = 1;
if (locale.empty()) {
if (has_cache) {
locale = load_locale_from_cache();
}
if (locale.empty()) {
static constexpr const char* DEFAULT_LOCALE = "en-US";
locale = DEFAULT_LOCALE;
}
}
static constexpr const char* kDefaultLibRecoveryUIExt = "librecovery_ui_ext.so";
// Intentionally not calling dlclose(3) to avoid potential gotchas (e.g. `make_device` may have
// handed out pointers to code or static [or thread-local] data and doesn't collect them all back
// in on dlclose).
void* librecovery_ui_ext = dlopen(kDefaultLibRecoveryUIExt, RTLD_NOW);
using MakeDeviceType = decltype(&make_device);
MakeDeviceType make_device_func = nullptr;
if (librecovery_ui_ext == nullptr) {
printf("Failed to dlopen %s: %s\n", kDefaultLibRecoveryUIExt, dlerror());
} else {
reinterpret_cast<void*&>(make_device_func) = dlsym(librecovery_ui_ext, "make_device");
if (make_device_func == nullptr) {
printf("Failed to dlsym make_device: %s\n", dlerror());
}
}
Device* device;
if (make_device_func == nullptr) {
printf("Falling back to the default make_device() instead\n");
device = make_device();
} else {
printf("Loading make_device from %s\n", kDefaultLibRecoveryUIExt);
device = (*make_device_func)();
}
if (android::base::GetBoolProperty("ro.boot.quiescent", false)) {
printf("Quiescent recovery mode.\n");
device->ResetUI(new StubRecoveryUI());
} else {
if (!device->GetUI()->Init(locale)) {
printf("Failed to initialize UI; using stub UI instead.\n");
device->ResetUI(new StubRecoveryUI());
}
}
ui = device->GetUI();
if (!has_cache) {
device->RemoveMenuItemForAction(Device::WIPE_CACHE);
}
if (!android::base::GetBoolProperty("ro.boot.dynamic_partitions", false)) {
device->RemoveMenuItemForAction(Device::ENTER_FASTBOOT);
}
ui->SetBackground(RecoveryUI::NONE);
if (show_text) ui->ShowText(true);
LOG(INFO) << "Starting recovery (pid " << getpid() << ") on " << ctime(&start);
LOG(INFO) << "locale is [" << locale << "]";
sehandle = selinux_android_file_context_handle();
selinux_android_set_sehandle(sehandle);
if (!sehandle) {
ui->Print("Warning: No file_contexts\n");
}
std::atomic<Device::BuiltinAction> action;
std::thread listener_thread(ListenRecoverySocket, ui, std::ref(action));
listener_thread.detach();
while (true) {
std::string usb_config = fastboot ? "fastboot" : is_ro_debuggable() ? "adb" : "none";
std::string usb_state = android::base::GetProperty("sys.usb.state", "none");
if (usb_config != usb_state) {
if (!SetUsbConfig("none")) {
LOG(ERROR) << "Failed to clear USB config";
}
if (!SetUsbConfig(usb_config)) {
LOG(ERROR) << "Failed to set USB config to " << usb_config;
}
}
auto ret = fastboot ? StartFastboot(device, args) : start_recovery(device, args);
if (ret == Device::KEY_INTERRUPTED) {
ret = action.exchange(ret);
if (ret == Device::NO_ACTION) {
continue;
}
}
switch (ret) {
case Device::SHUTDOWN:
ui->Print("Shutting down...\n");
android::base::SetProperty(ANDROID_RB_PROPERTY, "shutdown,");
break;
case Device::REBOOT_BOOTLOADER:
ui->Print("Rebooting to bootloader...\n");
android::base::SetProperty(ANDROID_RB_PROPERTY, "reboot,bootloader");
break;
case Device::ENTER_FASTBOOT:
LOG(INFO) << "Entering fastboot";
fastboot = true;
break;
case Device::ENTER_RECOVERY:
LOG(INFO) << "Entering recovery";
fastboot = false;
break;
default:
ui->Print("Rebooting...\n");
reboot("reboot,");
break;
}
}
// Should be unreachable.
return EXIT_SUCCESS;
}