Merge "Refactor battery info querying functions into librecovery_utils." am: 678d6395b3
am: 80b6831ddb
Change-Id: Ic110e512c91fd390f87392a0f6601cb6acce9aeb
diff --git a/Android.bp b/Android.bp
index 0759e08..45aafb0 100644
--- a/Android.bp
+++ b/Android.bp
@@ -58,7 +58,6 @@
],
shared_libs: [
- "android.hardware.health@2.0",
"libbase",
"libbootloader_message",
"libcrypto",
@@ -74,9 +73,6 @@
"libminui",
"librecovery_utils",
"libotautil",
-
- // external dependencies
- "libhealthhalutils",
],
}
@@ -105,6 +101,7 @@
defaults: [
"libinstall_defaults",
"librecovery_defaults",
+ "librecovery_utils_defaults",
],
srcs: [
diff --git a/recovery.cpp b/recovery.cpp
index 682ddbc..f59a940 100644
--- a/recovery.cpp
+++ b/recovery.cpp
@@ -42,7 +42,6 @@
#include <android-base/strings.h>
#include <cutils/properties.h> /* for property_list */
#include <fs_mgr/roots.h>
-#include <healthhalutils/HealthHalUtils.h>
#include <ziparchive/zip_archive.h>
#include "bootloader_message/bootloader_message.h"
@@ -59,6 +58,7 @@
#include "otautil/sysutil.h"
#include "recovery_ui/screen_ui.h"
#include "recovery_ui/ui.h"
+#include "recovery_utils/battery_utils.h"
#include "recovery_utils/logging.h"
#include "recovery_utils/roots.h"
@@ -453,74 +453,17 @@
printf("%s=%s\n", key, name);
}
-static bool is_battery_ok(int* required_battery_level) {
- using android::hardware::health::V1_0::BatteryStatus;
- using android::hardware::health::V2_0::get_health_service;
- using android::hardware::health::V2_0::IHealth;
- using android::hardware::health::V2_0::Result;
- using android::hardware::health::V2_0::toString;
+static bool IsBatteryOk(int* required_battery_level) {
+ // GmsCore enters recovery mode to install package when having enough battery percentage.
+ // Normally, the threshold is 40% without charger and 20% with charger. So we check the battery
+ // level against a slightly lower limit.
+ constexpr int BATTERY_OK_PERCENTAGE = 20;
+ constexpr int BATTERY_WITH_CHARGER_OK_PERCENTAGE = 15;
- android::sp<IHealth> health = get_health_service();
-
- static constexpr int BATTERY_READ_TIMEOUT_IN_SEC = 10;
- int wait_second = 0;
- while (true) {
- auto charge_status = BatteryStatus::UNKNOWN;
-
- if (health == nullptr) {
- LOG(WARNING) << "no health implementation is found, assuming defaults";
- } else {
- health
- ->getChargeStatus([&charge_status](auto res, auto out_status) {
- if (res == Result::SUCCESS) {
- charge_status = out_status;
- }
- })
- .isOk(); // should not have transport error
- }
-
- // Treat unknown status as charged.
- bool charged = (charge_status != BatteryStatus::DISCHARGING &&
- charge_status != BatteryStatus::NOT_CHARGING);
-
- Result res = Result::UNKNOWN;
- int32_t capacity = INT32_MIN;
- if (health != nullptr) {
- health
- ->getCapacity([&res, &capacity](auto out_res, auto out_capacity) {
- res = out_res;
- capacity = out_capacity;
- })
- .isOk(); // should not have transport error
- }
-
- LOG(INFO) << "charge_status " << toString(charge_status) << ", charged " << charged
- << ", status " << toString(res) << ", capacity " << capacity;
- // At startup, the battery drivers in devices like N5X/N6P take some time to load
- // the battery profile. Before the load finishes, it reports value 50 as a fake
- // capacity. BATTERY_READ_TIMEOUT_IN_SEC is set that the battery drivers are expected
- // to finish loading the battery profile earlier than 10 seconds after kernel startup.
- if (res == Result::SUCCESS && capacity == 50) {
- if (wait_second < BATTERY_READ_TIMEOUT_IN_SEC) {
- sleep(1);
- wait_second++;
- continue;
- }
- }
- // If we can't read battery percentage, it may be a device without battery. In this
- // situation, use 100 as a fake battery percentage.
- if (res != Result::SUCCESS) {
- capacity = 100;
- }
-
- // GmsCore enters recovery mode to install package when having enough battery percentage.
- // Normally, the threshold is 40% without charger and 20% with charger. So we should check
- // battery with a slightly lower limitation.
- static constexpr int BATTERY_OK_PERCENTAGE = 20;
- static constexpr int BATTERY_WITH_CHARGER_OK_PERCENTAGE = 15;
- *required_battery_level = charged ? BATTERY_WITH_CHARGER_OK_PERCENTAGE : BATTERY_OK_PERCENTAGE;
- return capacity >= *required_battery_level;
- }
+ auto battery_info = GetBatteryInfo();
+ *required_battery_level =
+ battery_info.charging ? BATTERY_WITH_CHARGER_OK_PERCENTAGE : BATTERY_OK_PERCENTAGE;
+ return battery_info.capacity >= *required_battery_level;
}
// Set the retry count to |retry_count| in BCB.
@@ -713,12 +656,10 @@
// to log the update attempt since update_package is non-NULL.
save_current_log = true;
- int required_battery_level;
- if (retry_count == 0 && !is_battery_ok(&required_battery_level)) {
+ if (int required_battery_level; retry_count == 0 && !IsBatteryOk(&required_battery_level)) {
ui->Print("battery capacity is not enough for installing package: %d%% needed\n",
required_battery_level);
- // Log the error code to last_install when installation skips due to
- // low battery.
+ // Log the error code to last_install when installation skips due to low battery.
log_failure_code(kLowBattery, update_package);
status = INSTALL_SKIPPED;
} else if (retry_count == 0 && bootreason_in_blacklist()) {
diff --git a/recovery_utils/Android.bp b/recovery_utils/Android.bp
index 271d079..463f27f 100644
--- a/recovery_utils/Android.bp
+++ b/recovery_utils/Android.bp
@@ -12,6 +12,32 @@
// See the License for the specific language governing permissions and
// limitations under the License.
+cc_defaults {
+ name: "librecovery_utils_defaults",
+
+ defaults: [
+ "recovery_defaults",
+ ],
+
+ shared_libs: [
+ "android.hardware.health@2.0",
+ "libbase",
+ "libext4_utils",
+ "libfs_mgr",
+ "libhidlbase",
+ "libselinux",
+ "libutils",
+ ],
+
+ static_libs: [
+ "libotautil",
+
+ // External dependencies.
+ "libfstab",
+ "libhealthhalutils",
+ ],
+}
+
// A utility lib that's local to recovery (in contrast, libotautil is exposed to device-specific
// recovery_ui lib as well as device-specific updater).
cc_library_static {
@@ -20,23 +46,17 @@
recovery_available: true,
defaults: [
- "recovery_defaults",
+ "librecovery_utils_defaults",
],
srcs: [
+ "battery_utils.cpp",
"logging.cpp",
"parse_install_logs.cpp",
"roots.cpp",
"thermalutil.cpp",
],
- shared_libs: [
- "libbase",
- "libext4_utils",
- "libfs_mgr",
- "libselinux",
- ],
-
export_include_dirs: [
"include",
],
@@ -45,13 +65,6 @@
"system/vold",
],
- static_libs: [
- "libotautil",
-
- // external dependency
- "libfstab",
- ],
-
export_static_lib_headers: [
"libfstab",
],
diff --git a/recovery_utils/battery_utils.cpp b/recovery_utils/battery_utils.cpp
new file mode 100644
index 0000000..323f525
--- /dev/null
+++ b/recovery_utils/battery_utils.cpp
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "recovery_utils/battery_utils.h"
+
+#include <stdint.h>
+#include <unistd.h>
+
+#include <android-base/logging.h>
+#include <healthhalutils/HealthHalUtils.h>
+
+BatteryInfo GetBatteryInfo() {
+ using android::hardware::health::V1_0::BatteryStatus;
+ using android::hardware::health::V2_0::get_health_service;
+ using android::hardware::health::V2_0::IHealth;
+ using android::hardware::health::V2_0::Result;
+ using android::hardware::health::V2_0::toString;
+
+ android::sp<IHealth> health = get_health_service();
+
+ int wait_second = 0;
+ while (true) {
+ auto charge_status = BatteryStatus::UNKNOWN;
+
+ if (health == nullptr) {
+ LOG(WARNING) << "No health implementation is found; assuming defaults";
+ } else {
+ health
+ ->getChargeStatus([&charge_status](auto res, auto out_status) {
+ if (res == Result::SUCCESS) {
+ charge_status = out_status;
+ }
+ })
+ .isOk(); // should not have transport error
+ }
+
+ // Treat unknown status as on charger. See hardware/interfaces/health/1.0/types.hal for the
+ // meaning of the return values.
+ bool charging = (charge_status != BatteryStatus::DISCHARGING &&
+ charge_status != BatteryStatus::NOT_CHARGING);
+
+ Result res = Result::UNKNOWN;
+ int32_t capacity = INT32_MIN;
+ if (health != nullptr) {
+ health
+ ->getCapacity([&res, &capacity](auto out_res, auto out_capacity) {
+ res = out_res;
+ capacity = out_capacity;
+ })
+ .isOk(); // should not have transport error
+ }
+
+ LOG(INFO) << "charge_status " << toString(charge_status) << ", charging " << charging
+ << ", status " << toString(res) << ", capacity " << capacity;
+
+ constexpr int BATTERY_READ_TIMEOUT_IN_SEC = 10;
+ // At startup, the battery drivers in devices like N5X/N6P take some time to load
+ // the battery profile. Before the load finishes, it reports value 50 as a fake
+ // capacity. BATTERY_READ_TIMEOUT_IN_SEC is set that the battery drivers are expected
+ // to finish loading the battery profile earlier than 10 seconds after kernel startup.
+ if (res == Result::SUCCESS && capacity == 50) {
+ if (wait_second < BATTERY_READ_TIMEOUT_IN_SEC) {
+ sleep(1);
+ wait_second++;
+ continue;
+ }
+ }
+ // If we can't read battery percentage, it may be a device without battery. In this
+ // situation, use 100 as a fake battery percentage.
+ if (res != Result::SUCCESS) {
+ capacity = 100;
+ }
+
+ return BatteryInfo{ charging, capacity };
+ }
+}
diff --git a/recovery_utils/include/recovery_utils/battery_utils.h b/recovery_utils/include/recovery_utils/battery_utils.h
new file mode 100644
index 0000000..a95f71d
--- /dev/null
+++ b/recovery_utils/include/recovery_utils/battery_utils.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <stdint.h>
+
+struct BatteryInfo {
+ // Whether the device is on charger. Note that the value will be `true` if the battery status is
+ // unknown (BATTERY_STATUS_UNKNOWN).
+ bool charging;
+
+ // The remaining battery capacity percentage (i.e. between 0 and 100). See getCapacity in
+ // hardware/interfaces/health/2.0/IHealth.hal. Returns 100 in case it fails to read a value from
+ // the health HAL.
+ int32_t capacity;
+};
+
+// Returns the battery status for OTA installation purpose.
+BatteryInfo GetBatteryInfo();
diff --git a/tests/unit/battery_utils_test.cpp b/tests/unit/battery_utils_test.cpp
new file mode 100644
index 0000000..55639fd
--- /dev/null
+++ b/tests/unit/battery_utils_test.cpp
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agree to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <android-base/logging.h>
+#include <gtest/gtest.h>
+
+#include "recovery_utils/battery_utils.h"
+
+TEST(BatteryInfoTest, GetBatteryInfo) {
+ auto info = GetBatteryInfo();
+ // 0 <= capacity <= 100
+ ASSERT_LE(0, info.capacity);
+ ASSERT_LE(info.capacity, 100);
+}