separate fbdev-specific code out from minui
Isolate the code that interacts with fbdev, in preparation for adding
a new backend.
Change-Id: I19105e9da1ca6408cebc110f7e2bb5abfb481ee9
diff --git a/minui/graphics.c b/minui/graphics.c
index c2fc9ea..f8ffa89 100644
--- a/minui/graphics.c
+++ b/minui/graphics.c
@@ -32,6 +32,7 @@
#include "font_10x18.h"
#include "minui.h"
+#include "graphics.h"
typedef struct {
GRSurface* texture;
@@ -40,155 +41,26 @@
} GRFont;
static GRFont* gr_font = NULL;
+static minui_backend* gr_backend = NULL;
static int overscan_percent = OVERSCAN_PERCENT;
static int overscan_offset_x = 0;
static int overscan_offset_y = 0;
-static int gr_fb_fd = -1;
static int gr_vt_fd = -1;
-static GRSurface gr_framebuffer[2];
-static bool double_buffered;
-static GRSurface* gr_draw = NULL;
-static int displayed_buffer;
-
static unsigned char gr_current_r = 255;
static unsigned char gr_current_g = 255;
static unsigned char gr_current_b = 255;
static unsigned char gr_current_a = 255;
-static struct fb_var_screeninfo vi;
+static GRSurface* gr_draw = NULL;
static bool outside(int x, int y)
{
return x < 0 || x >= gr_draw->width || y < 0 || y >= gr_draw->height;
}
-static void set_displayed_framebuffer(unsigned n)
-{
- if (n > 1 || !double_buffered) return;
-
- vi.yres_virtual = gr_framebuffer[0].height * 2;
- vi.yoffset = n * gr_framebuffer[0].height;
- vi.bits_per_pixel = gr_framebuffer[0].pixel_bytes * 8;
- if (ioctl(gr_fb_fd, FBIOPUT_VSCREENINFO, &vi) < 0) {
- perror("active fb swap failed");
- }
- displayed_buffer = n;
-}
-
-static int get_framebuffer()
-{
- int fd;
- void *bits;
-
- struct fb_fix_screeninfo fi;
-
- fd = open("/dev/graphics/fb0", O_RDWR);
- if (fd < 0) {
- perror("cannot open fb0");
- return -1;
- }
-
- if (ioctl(fd, FBIOGET_FSCREENINFO, &fi) < 0) {
- perror("failed to get fb0 info");
- close(fd);
- return -1;
- }
-
- if (ioctl(fd, FBIOGET_VSCREENINFO, &vi) < 0) {
- perror("failed to get fb0 info");
- close(fd);
- return -1;
- }
-
- // We print this out for informational purposes only, but
- // throughout we assume that the framebuffer device uses an RGBX
- // pixel format. This is the case for every development device I
- // have access to. For some of those devices (eg, hammerhead aka
- // Nexus 5), FBIOGET_VSCREENINFO *reports* that it wants a
- // different format (XBGR) but actually produces the correct
- // results on the display when you write RGBX.
- //
- // If you have a device that actually *needs* another pixel format
- // (ie, BGRX, or 565), patches welcome...
-
- printf("fb0 reports (possibly inaccurate):\n"
- " vi.bits_per_pixel = %d\n"
- " vi.red.offset = %3d .length = %3d\n"
- " vi.green.offset = %3d .length = %3d\n"
- " vi.blue.offset = %3d .length = %3d\n",
- vi.bits_per_pixel,
- vi.red.offset, vi.red.length,
- vi.green.offset, vi.green.length,
- vi.blue.offset, vi.blue.length);
-
- bits = mmap(0, fi.smem_len, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
- if (bits == MAP_FAILED) {
- perror("failed to mmap framebuffer");
- close(fd);
- return -1;
- }
-
- overscan_offset_x = vi.xres * overscan_percent / 100;
- overscan_offset_y = vi.yres * overscan_percent / 100;
-
- gr_framebuffer[0].width = vi.xres;
- gr_framebuffer[0].height = vi.yres;
- gr_framebuffer[0].row_bytes = fi.line_length;
- gr_framebuffer[0].pixel_bytes = vi.bits_per_pixel / 8;
- gr_framebuffer[0].data = bits;
- memset(gr_framebuffer[0].data, 0, gr_framebuffer[0].height * gr_framebuffer[0].row_bytes);
-
- /* check if we can use double buffering */
- if (vi.yres * fi.line_length * 2 <= fi.smem_len) {
- double_buffered = true;
-
- memcpy(gr_framebuffer+1, gr_framebuffer, sizeof(GRSurface));
- gr_framebuffer[1].data = gr_framebuffer[0].data +
- gr_framebuffer[0].height * gr_framebuffer[0].row_bytes;
-
- gr_draw = gr_framebuffer+1;
-
- } else {
- double_buffered = false;
-
- // Without double-buffering, we allocate RAM for a buffer to
- // draw in, and then "flipping" the buffer consists of a
- // memcpy from the buffer we allocated to the framebuffer.
-
- gr_draw = (GRSurface*) malloc(sizeof(GRSurface));
- memcpy(gr_draw, gr_framebuffer, sizeof(GRSurface));
- gr_draw->data = (unsigned char*) malloc(gr_draw->height * gr_draw->row_bytes);
- if (!gr_draw->data) {
- perror("failed to allocate in-memory surface");
- return -1;
- }
- }
-
- memset(gr_draw->data, 0, gr_draw->height * gr_draw->row_bytes);
- gr_fb_fd = fd;
- set_displayed_framebuffer(0);
-
- return fd;
-}
-
-void gr_flip(void)
-{
- if (double_buffered) {
- // Change gr_draw to point to the buffer currently displayed,
- // then flip the driver so we're displaying the other buffer
- // instead.
- gr_draw = gr_framebuffer + displayed_buffer;
- set_displayed_framebuffer(1-displayed_buffer);
- } else {
- // Copy from the in-memory surface to the framebuffer.
- memcpy(gr_framebuffer[0].data, gr_draw->data,
- gr_draw->height * gr_draw->row_bytes);
- }
-}
-
int gr_measure(const char *s)
{
return gr_font->cwidth * strlen(s);
@@ -466,7 +338,7 @@
gr_color(0, 0, 255, 128);
gr_fill(gr_draw->width - 200 - x, 300, gr_draw->width - x, 500);
- gr_flip();
+ gr_draw = gr_backend->flip(gr_backend);
}
printf("getting end time\n");
time_t end = time(NULL);
@@ -478,6 +350,10 @@
}
#endif
+void gr_flip() {
+ gr_draw = gr_backend->flip(gr_backend);
+}
+
int gr_init(void)
{
gr_init_font();
@@ -493,36 +369,28 @@
return -1;
}
- if (get_framebuffer(&gr_framebuffer) < 0) {
- gr_exit();
+ gr_backend = open_fbdev();
+ gr_draw = gr_backend->init(gr_backend);
+ if (gr_draw == NULL) {
return -1;
}
- printf("framebuffer: fd %d (%d x %d)\n",
- gr_fb_fd, gr_draw->width, gr_draw->height);
+ overscan_offset_x = gr_draw->width * overscan_percent / 100;
+ overscan_offset_y = gr_draw->height * overscan_percent / 100;
gr_flip();
gr_flip();
- gr_fb_blank(true);
- gr_fb_blank(false);
-
return 0;
}
void gr_exit(void)
{
- close(gr_fb_fd);
- gr_fb_fd = -1;
+ gr_backend->exit(gr_backend);
ioctl(gr_vt_fd, KDSETMODE, (void*) KD_TEXT);
close(gr_vt_fd);
gr_vt_fd = -1;
-
- if (!double_buffered) {
- if (gr_draw) free(gr_draw->data);
- free(gr_draw);
- }
}
int gr_fb_width(void)
@@ -537,9 +405,5 @@
void gr_fb_blank(bool blank)
{
- int ret;
-
- ret = ioctl(gr_fb_fd, FBIOBLANK, blank ? FB_BLANK_POWERDOWN : FB_BLANK_UNBLANK);
- if (ret < 0)
- perror("ioctl(): blank");
+ gr_backend->blank(gr_backend, blank);
}