/*
 * Copyright (C) 2009 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

// See imgdiff.cpp in this directory for a description of the patch file
// format.

#include <applypatch/imgpatch.h>

#include <errno.h>
#include <stdio.h>
#include <string.h>
#include <sys/cdefs.h>
#include <sys/stat.h>
#include <unistd.h>

#include <string>
#include <vector>

#include <applypatch/applypatch.h>
#include <applypatch/imgdiff.h>
#include <android-base/memory.h>
#include <openssl/sha.h>
#include <zlib.h>

static inline int64_t Read8(const void *address) {
  return android::base::get_unaligned<int64_t>(address);
}

static inline int32_t Read4(const void *address) {
  return android::base::get_unaligned<int32_t>(address);
}

int ApplyImagePatch(const unsigned char* old_data, size_t old_size, const unsigned char* patch_data,
                    size_t patch_size, SinkFn sink) {
  Value patch(VAL_BLOB, std::string(reinterpret_cast<const char*>(patch_data), patch_size));

  return ApplyImagePatch(old_data, old_size, &patch, sink, nullptr, nullptr);
}

/*
 * Apply the patch given in 'patch_filename' to the source data given
 * by (old_data, old_size).  Write the patched output to the 'output'
 * file, and update the SHA context with the output data as well.
 * Return 0 on success.
 */
int ApplyImagePatch(const unsigned char* old_data, size_t old_size, const Value* patch, SinkFn sink,
                    SHA_CTX* ctx, const Value* bonus_data) {
  if (patch->data.size() < 12) {
    printf("patch too short to contain header\n");
    return -1;
  }

  // IMGDIFF2 uses CHUNK_NORMAL, CHUNK_DEFLATE, and CHUNK_RAW.
  // (IMGDIFF1, which is no longer supported, used CHUNK_NORMAL and
  // CHUNK_GZIP.)
  size_t pos = 12;
  const char* header = &patch->data[0];
  if (memcmp(header, "IMGDIFF2", 8) != 0) {
    printf("corrupt patch file header (magic number)\n");
    return -1;
  }

  int num_chunks = Read4(header + 8);

  for (int i = 0; i < num_chunks; ++i) {
    // each chunk's header record starts with 4 bytes.
    if (pos + 4 > patch->data.size()) {
      printf("failed to read chunk %d record\n", i);
      return -1;
    }
    int type = Read4(&patch->data[pos]);
    pos += 4;

    if (type == CHUNK_NORMAL) {
      const char* normal_header = &patch->data[pos];
      pos += 24;
      if (pos > patch->data.size()) {
        printf("failed to read chunk %d normal header data\n", i);
        return -1;
      }

      size_t src_start = static_cast<size_t>(Read8(normal_header));
      size_t src_len = static_cast<size_t>(Read8(normal_header + 8));
      size_t patch_offset = static_cast<size_t>(Read8(normal_header + 16));

      if (src_start + src_len > old_size) {
        printf("source data too short\n");
        return -1;
      }
      ApplyBSDiffPatch(old_data + src_start, src_len, patch, patch_offset, sink, ctx);
    } else if (type == CHUNK_RAW) {
      const char* raw_header = &patch->data[pos];
      pos += 4;
      if (pos > patch->data.size()) {
        printf("failed to read chunk %d raw header data\n", i);
        return -1;
      }

      size_t data_len = static_cast<size_t>(Read4(raw_header));

      if (pos + data_len > patch->data.size()) {
        printf("failed to read chunk %d raw data\n", i);
        return -1;
      }
      if (ctx) SHA1_Update(ctx, &patch->data[pos], data_len);
      if (sink(reinterpret_cast<const unsigned char*>(&patch->data[pos]), data_len) != data_len) {
        printf("failed to write chunk %d raw data\n", i);
        return -1;
      }
      pos += data_len;
    } else if (type == CHUNK_DEFLATE) {
      // deflate chunks have an additional 60 bytes in their chunk header.
      const char* deflate_header = &patch->data[pos];
      pos += 60;
      if (pos > patch->data.size()) {
        printf("failed to read chunk %d deflate header data\n", i);
        return -1;
      }

      size_t src_start = static_cast<size_t>(Read8(deflate_header));
      size_t src_len = static_cast<size_t>(Read8(deflate_header + 8));
      size_t patch_offset = static_cast<size_t>(Read8(deflate_header + 16));
      size_t expanded_len = static_cast<size_t>(Read8(deflate_header + 24));
      size_t target_len = static_cast<size_t>(Read8(deflate_header + 32));
      int level = Read4(deflate_header + 40);
      int method = Read4(deflate_header + 44);
      int windowBits = Read4(deflate_header + 48);
      int memLevel = Read4(deflate_header + 52);
      int strategy = Read4(deflate_header + 56);

      if (src_start + src_len > old_size) {
        printf("source data too short\n");
        return -1;
      }

      // Decompress the source data; the chunk header tells us exactly
      // how big we expect it to be when decompressed.

      // Note: expanded_len will include the bonus data size if
      // the patch was constructed with bonus data.  The
      // deflation will come up 'bonus_size' bytes short; these
      // must be appended from the bonus_data value.
      size_t bonus_size = (i == 1 && bonus_data != NULL) ? bonus_data->data.size() : 0;

      std::vector<unsigned char> expanded_source(expanded_len);

      // inflate() doesn't like strm.next_out being a nullptr even with
      // avail_out being zero (Z_STREAM_ERROR).
      if (expanded_len != 0) {
        z_stream strm;
        strm.zalloc = Z_NULL;
        strm.zfree = Z_NULL;
        strm.opaque = Z_NULL;
        strm.avail_in = src_len;
        strm.next_in = old_data + src_start;
        strm.avail_out = expanded_len;
        strm.next_out = expanded_source.data();

        int ret = inflateInit2(&strm, -15);
        if (ret != Z_OK) {
          printf("failed to init source inflation: %d\n", ret);
          return -1;
        }

        // Because we've provided enough room to accommodate the output
        // data, we expect one call to inflate() to suffice.
        ret = inflate(&strm, Z_SYNC_FLUSH);
        if (ret != Z_STREAM_END) {
          printf("source inflation returned %d\n", ret);
          return -1;
        }
        // We should have filled the output buffer exactly, except
        // for the bonus_size.
        if (strm.avail_out != bonus_size) {
          printf("source inflation short by %zu bytes\n", strm.avail_out - bonus_size);
          return -1;
        }
        inflateEnd(&strm);

        if (bonus_size) {
          memcpy(expanded_source.data() + (expanded_len - bonus_size), &bonus_data->data[0],
                 bonus_size);
        }
      }

      // Next, apply the bsdiff patch (in memory) to the uncompressed data.
      std::vector<unsigned char> uncompressed_target_data;
      // TODO(senj): Remove the only usage of ApplyBSDiffPatchMem here,
      // replace it with ApplyBSDiffPatch with a custom sink function that
      // wraps the given sink function to stream output to save memory.
      if (ApplyBSDiffPatchMem(expanded_source.data(), expanded_len, patch, patch_offset,
                              &uncompressed_target_data) != 0) {
        return -1;
      }
      if (uncompressed_target_data.size() != target_len) {
        printf("expected target len to be %zu, but it's %zu\n", target_len,
               uncompressed_target_data.size());
        return -1;
      }

      // Now compress the target data and append it to the output.

      // we're done with the expanded_source data buffer, so we'll
      // reuse that memory to receive the output of deflate.
      if (expanded_source.size() < 32768U) {
        expanded_source.resize(32768U);
      }

      {
        std::vector<unsigned char>& temp_data = expanded_source;

        // now the deflate stream
        z_stream strm;
        strm.zalloc = Z_NULL;
        strm.zfree = Z_NULL;
        strm.opaque = Z_NULL;
        strm.avail_in = uncompressed_target_data.size();
        strm.next_in = uncompressed_target_data.data();
        int ret = deflateInit2(&strm, level, method, windowBits, memLevel, strategy);
        if (ret != Z_OK) {
          printf("failed to init uncompressed data deflation: %d\n", ret);
          return -1;
        }
        do {
          strm.avail_out = temp_data.size();
          strm.next_out = temp_data.data();
          ret = deflate(&strm, Z_FINISH);
          size_t have = temp_data.size() - strm.avail_out;

          if (sink(temp_data.data(), have) != have) {
            printf("failed to write %zd compressed bytes to output\n", have);
            return -1;
          }
          if (ctx) SHA1_Update(ctx, temp_data.data(), have);
        } while (ret != Z_STREAM_END);
        deflateEnd(&strm);
      }
    } else {
      printf("patch chunk %d is unknown type %d\n", i, type);
      return -1;
    }
  }

  return 0;
}