diff --git a/libjpegtwrp/cjpeg.c b/libjpegtwrp/cjpeg.c
new file mode 100644
index 0000000..f2a929f
--- /dev/null
+++ b/libjpegtwrp/cjpeg.c
@@ -0,0 +1,606 @@
+/*
+ * cjpeg.c
+ *
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a command-line user interface for the JPEG compressor.
+ * It should work on any system with Unix- or MS-DOS-style command lines.
+ *
+ * Two different command line styles are permitted, depending on the
+ * compile-time switch TWO_FILE_COMMANDLINE:
+ *	cjpeg [options]  inputfile outputfile
+ *	cjpeg [options]  [inputfile]
+ * In the second style, output is always to standard output, which you'd
+ * normally redirect to a file or pipe to some other program.  Input is
+ * either from a named file or from standard input (typically redirected).
+ * The second style is convenient on Unix but is unhelpful on systems that
+ * don't support pipes.  Also, you MUST use the first style if your system
+ * doesn't do binary I/O to stdin/stdout.
+ * To simplify script writing, the "-outfile" switch is provided.  The syntax
+ *	cjpeg [options]  -outfile outputfile  inputfile
+ * works regardless of which command line style is used.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include "jversion.h"		/* for version message */
+
+#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
+#ifdef __MWERKS__
+#include <SIOUX.h>              /* Metrowerks needs this */
+#include <console.h>		/* ... and this */
+#endif
+#ifdef THINK_C
+#include <console.h>		/* Think declares it here */
+#endif
+#endif
+
+
+/* Create the add-on message string table. */
+
+#define JMESSAGE(code,string)	string ,
+
+static const char * const cdjpeg_message_table[] = {
+#include "cderror.h"
+  NULL
+};
+
+
+/*
+ * This routine determines what format the input file is,
+ * and selects the appropriate input-reading module.
+ *
+ * To determine which family of input formats the file belongs to,
+ * we may look only at the first byte of the file, since C does not
+ * guarantee that more than one character can be pushed back with ungetc.
+ * Looking at additional bytes would require one of these approaches:
+ *     1) assume we can fseek() the input file (fails for piped input);
+ *     2) assume we can push back more than one character (works in
+ *        some C implementations, but unportable);
+ *     3) provide our own buffering (breaks input readers that want to use
+ *        stdio directly, such as the RLE library);
+ * or  4) don't put back the data, and modify the input_init methods to assume
+ *        they start reading after the start of file (also breaks RLE library).
+ * #1 is attractive for MS-DOS but is untenable on Unix.
+ *
+ * The most portable solution for file types that can't be identified by their
+ * first byte is to make the user tell us what they are.  This is also the
+ * only approach for "raw" file types that contain only arbitrary values.
+ * We presently apply this method for Targa files.  Most of the time Targa
+ * files start with 0x00, so we recognize that case.  Potentially, however,
+ * a Targa file could start with any byte value (byte 0 is the length of the
+ * seldom-used ID field), so we provide a switch to force Targa input mode.
+ */
+
+static boolean is_targa;	/* records user -targa switch */
+
+
+LOCAL(cjpeg_source_ptr)
+select_file_type (j_compress_ptr cinfo, FILE * infile)
+{
+  int c;
+
+  if (is_targa) {
+#ifdef TARGA_SUPPORTED
+    return jinit_read_targa(cinfo);
+#else
+    ERREXIT(cinfo, JERR_TGA_NOTCOMP);
+#endif
+  }
+
+  if ((c = getc(infile)) == EOF)
+    ERREXIT(cinfo, JERR_INPUT_EMPTY);
+  if (ungetc(c, infile) == EOF)
+    ERREXIT(cinfo, JERR_UNGETC_FAILED);
+
+  switch (c) {
+#ifdef BMP_SUPPORTED
+  case 'B':
+    return jinit_read_bmp(cinfo);
+#endif
+#ifdef GIF_SUPPORTED
+  case 'G':
+    return jinit_read_gif(cinfo);
+#endif
+#ifdef PPM_SUPPORTED
+  case 'P':
+    return jinit_read_ppm(cinfo);
+#endif
+#ifdef RLE_SUPPORTED
+  case 'R':
+    return jinit_read_rle(cinfo);
+#endif
+#ifdef TARGA_SUPPORTED
+  case 0x00:
+    return jinit_read_targa(cinfo);
+#endif
+  default:
+    ERREXIT(cinfo, JERR_UNKNOWN_FORMAT);
+    break;
+  }
+
+  return NULL;			/* suppress compiler warnings */
+}
+
+
+/*
+ * Argument-parsing code.
+ * The switch parser is designed to be useful with DOS-style command line
+ * syntax, ie, intermixed switches and file names, where only the switches
+ * to the left of a given file name affect processing of that file.
+ * The main program in this file doesn't actually use this capability...
+ */
+
+
+static const char * progname;	/* program name for error messages */
+static char * outfilename;	/* for -outfile switch */
+
+
+LOCAL(void)
+usage (void)
+/* complain about bad command line */
+{
+  fprintf(stderr, "usage: %s [switches] ", progname);
+#ifdef TWO_FILE_COMMANDLINE
+  fprintf(stderr, "inputfile outputfile\n");
+#else
+  fprintf(stderr, "[inputfile]\n");
+#endif
+
+  fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -quality N     Compression quality (0..100; 5-95 is useful range)\n");
+  fprintf(stderr, "  -grayscale     Create monochrome JPEG file\n");
+#ifdef ENTROPY_OPT_SUPPORTED
+  fprintf(stderr, "  -optimize      Optimize Huffman table (smaller file, but slow compression)\n");
+#endif
+#ifdef C_PROGRESSIVE_SUPPORTED
+  fprintf(stderr, "  -progressive   Create progressive JPEG file\n");
+#endif
+#ifdef TARGA_SUPPORTED
+  fprintf(stderr, "  -targa         Input file is Targa format (usually not needed)\n");
+#endif
+  fprintf(stderr, "Switches for advanced users:\n");
+#ifdef DCT_ISLOW_SUPPORTED
+  fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+  fprintf(stderr, "  -dct fast      Use fast integer DCT (less accurate)%s\n",
+	  (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  fprintf(stderr, "  -dct float     Use floating-point DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
+#endif
+  fprintf(stderr, "  -restart N     Set restart interval in rows, or in blocks with B\n");
+#ifdef INPUT_SMOOTHING_SUPPORTED
+  fprintf(stderr, "  -smooth N      Smooth dithered input (N=1..100 is strength)\n");
+#endif
+  fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
+  fprintf(stderr, "  -outfile name  Specify name for output file\n");
+  fprintf(stderr, "  -verbose  or  -debug   Emit debug output\n");
+  fprintf(stderr, "Switches for wizards:\n");
+#ifdef C_ARITH_CODING_SUPPORTED
+  fprintf(stderr, "  -arithmetic    Use arithmetic coding\n");
+#endif
+  fprintf(stderr, "  -baseline      Force baseline quantization tables\n");
+  fprintf(stderr, "  -qtables file  Use quantization tables given in file\n");
+  fprintf(stderr, "  -qslots N[,...]    Set component quantization tables\n");
+  fprintf(stderr, "  -sample HxV[,...]  Set component sampling factors\n");
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+  fprintf(stderr, "  -scans file    Create multi-scan JPEG per script file\n");
+#endif
+  exit(EXIT_FAILURE);
+}
+
+
+LOCAL(int)
+parse_switches (j_compress_ptr cinfo, int argc, char **argv,
+		int last_file_arg_seen, boolean for_real)
+/* Parse optional switches.
+ * Returns argv[] index of first file-name argument (== argc if none).
+ * Any file names with indexes <= last_file_arg_seen are ignored;
+ * they have presumably been processed in a previous iteration.
+ * (Pass 0 for last_file_arg_seen on the first or only iteration.)
+ * for_real is FALSE on the first (dummy) pass; we may skip any expensive
+ * processing.
+ */
+{
+  int argn;
+  char * arg;
+  int quality;			/* -quality parameter */
+  int q_scale_factor;		/* scaling percentage for -qtables */
+  boolean force_baseline;
+  boolean simple_progressive;
+  char * qtablefile = NULL;	/* saves -qtables filename if any */
+  char * qslotsarg = NULL;	/* saves -qslots parm if any */
+  char * samplearg = NULL;	/* saves -sample parm if any */
+  char * scansarg = NULL;	/* saves -scans parm if any */
+
+  /* Set up default JPEG parameters. */
+  /* Note that default -quality level need not, and does not,
+   * match the default scaling for an explicit -qtables argument.
+   */
+  quality = 75;			/* default -quality value */
+  q_scale_factor = 100;		/* default to no scaling for -qtables */
+  force_baseline = FALSE;	/* by default, allow 16-bit quantizers */
+  simple_progressive = FALSE;
+  is_targa = FALSE;
+  outfilename = NULL;
+  cinfo->err->trace_level = 0;
+
+  /* Scan command line options, adjust parameters */
+
+  for (argn = 1; argn < argc; argn++) {
+    arg = argv[argn];
+    if (*arg != '-') {
+      /* Not a switch, must be a file name argument */
+      if (argn <= last_file_arg_seen) {
+	outfilename = NULL;	/* -outfile applies to just one input file */
+	continue;		/* ignore this name if previously processed */
+      }
+      break;			/* else done parsing switches */
+    }
+    arg++;			/* advance past switch marker character */
+
+    if (keymatch(arg, "arithmetic", 1)) {
+      /* Use arithmetic coding. */
+#ifdef C_ARITH_CODING_SUPPORTED
+      cinfo->arith_code = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, arithmetic coding not supported\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "baseline", 1)) {
+      /* Force baseline-compatible output (8-bit quantizer values). */
+      force_baseline = TRUE;
+
+    } else if (keymatch(arg, "dct", 2)) {
+      /* Select DCT algorithm. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "int", 1)) {
+	cinfo->dct_method = JDCT_ISLOW;
+      } else if (keymatch(argv[argn], "fast", 2)) {
+	cinfo->dct_method = JDCT_IFAST;
+      } else if (keymatch(argv[argn], "float", 2)) {
+	cinfo->dct_method = JDCT_FLOAT;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
+      /* Enable debug printouts. */
+      /* On first -d, print version identification */
+      static boolean printed_version = FALSE;
+
+      if (! printed_version) {
+	fprintf(stderr, "Independent JPEG Group's CJPEG, version %s\n%s\n",
+		JVERSION, JCOPYRIGHT);
+	printed_version = TRUE;
+      }
+      cinfo->err->trace_level++;
+
+    } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) {
+      /* Force a monochrome JPEG file to be generated. */
+      jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
+
+    } else if (keymatch(arg, "maxmemory", 3)) {
+      /* Maximum memory in Kb (or Mb with 'm'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (ch == 'm' || ch == 'M')
+	lval *= 1000L;
+      cinfo->mem->max_memory_to_use = lval * 1000L;
+
+    } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
+      /* Enable entropy parm optimization. */
+#ifdef ENTROPY_OPT_SUPPORTED
+      cinfo->optimize_coding = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "outfile", 4)) {
+      /* Set output file name. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      outfilename = argv[argn];	/* save it away for later use */
+
+    } else if (keymatch(arg, "progressive", 1)) {
+      /* Select simple progressive mode. */
+#ifdef C_PROGRESSIVE_SUPPORTED
+      simple_progressive = TRUE;
+      /* We must postpone execution until num_components is known. */
+#else
+      fprintf(stderr, "%s: sorry, progressive output was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "quality", 1)) {
+      /* Quality factor (quantization table scaling factor). */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &quality) != 1)
+	usage();
+      /* Change scale factor in case -qtables is present. */
+      q_scale_factor = jpeg_quality_scaling(quality);
+
+    } else if (keymatch(arg, "qslots", 2)) {
+      /* Quantization table slot numbers. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      qslotsarg = argv[argn];
+      /* Must delay setting qslots until after we have processed any
+       * colorspace-determining switches, since jpeg_set_colorspace sets
+       * default quant table numbers.
+       */
+
+    } else if (keymatch(arg, "qtables", 2)) {
+      /* Quantization tables fetched from file. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      qtablefile = argv[argn];
+      /* We postpone actually reading the file in case -quality comes later. */
+
+    } else if (keymatch(arg, "restart", 1)) {
+      /* Restart interval in MCU rows (or in MCUs with 'b'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (lval < 0 || lval > 65535L)
+	usage();
+      if (ch == 'b' || ch == 'B') {
+	cinfo->restart_interval = (unsigned int) lval;
+	cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */
+      } else {
+	cinfo->restart_in_rows = (int) lval;
+	/* restart_interval will be computed during startup */
+      }
+
+    } else if (keymatch(arg, "sample", 2)) {
+      /* Set sampling factors. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      samplearg = argv[argn];
+      /* Must delay setting sample factors until after we have processed any
+       * colorspace-determining switches, since jpeg_set_colorspace sets
+       * default sampling factors.
+       */
+
+    } else if (keymatch(arg, "scans", 2)) {
+      /* Set scan script. */
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      scansarg = argv[argn];
+      /* We must postpone reading the file in case -progressive appears. */
+#else
+      fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "smooth", 2)) {
+      /* Set input smoothing factor. */
+      int val;
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &val) != 1)
+	usage();
+      if (val < 0 || val > 100)
+	usage();
+      cinfo->smoothing_factor = val;
+
+    } else if (keymatch(arg, "targa", 1)) {
+      /* Input file is Targa format. */
+      is_targa = TRUE;
+
+    } else {
+      usage();			/* bogus switch */
+    }
+  }
+
+  /* Post-switch-scanning cleanup */
+
+  if (for_real) {
+
+    /* Set quantization tables for selected quality. */
+    /* Some or all may be overridden if -qtables is present. */
+    jpeg_set_quality(cinfo, quality, force_baseline);
+
+    if (qtablefile != NULL)	/* process -qtables if it was present */
+      if (! read_quant_tables(cinfo, qtablefile,
+			      q_scale_factor, force_baseline))
+	usage();
+
+    if (qslotsarg != NULL)	/* process -qslots if it was present */
+      if (! set_quant_slots(cinfo, qslotsarg))
+	usage();
+
+    if (samplearg != NULL)	/* process -sample if it was present */
+      if (! set_sample_factors(cinfo, samplearg))
+	usage();
+
+#ifdef C_PROGRESSIVE_SUPPORTED
+    if (simple_progressive)	/* process -progressive; -scans can override */
+      jpeg_simple_progression(cinfo);
+#endif
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+    if (scansarg != NULL)	/* process -scans if it was present */
+      if (! read_scan_script(cinfo, scansarg))
+	usage();
+#endif
+  }
+
+  return argn;			/* return index of next arg (file name) */
+}
+
+
+/*
+ * The main program.
+ */
+
+int
+main (int argc, char **argv)
+{
+  struct jpeg_compress_struct cinfo;
+  struct jpeg_error_mgr jerr;
+#ifdef PROGRESS_REPORT
+  struct cdjpeg_progress_mgr progress;
+#endif
+  int file_index;
+  cjpeg_source_ptr src_mgr;
+  FILE * input_file;
+  FILE * output_file;
+  JDIMENSION num_scanlines;
+
+  /* On Mac, fetch a command line. */
+#ifdef USE_CCOMMAND
+  argc = ccommand(&argv);
+#endif
+
+  progname = argv[0];
+  if (progname == NULL || progname[0] == 0)
+    progname = "cjpeg";		/* in case C library doesn't provide it */
+
+  /* Initialize the JPEG compression object with default error handling. */
+  cinfo.err = jpeg_std_error(&jerr);
+  jpeg_create_compress(&cinfo);
+  /* Add some application-specific error messages (from cderror.h) */
+  jerr.addon_message_table = cdjpeg_message_table;
+  jerr.first_addon_message = JMSG_FIRSTADDONCODE;
+  jerr.last_addon_message = JMSG_LASTADDONCODE;
+
+  /* Now safe to enable signal catcher. */
+#ifdef NEED_SIGNAL_CATCHER
+  enable_signal_catcher((j_common_ptr) &cinfo);
+#endif
+
+  /* Initialize JPEG parameters.
+   * Much of this may be overridden later.
+   * In particular, we don't yet know the input file's color space,
+   * but we need to provide some value for jpeg_set_defaults() to work.
+   */
+
+  cinfo.in_color_space = JCS_RGB; /* arbitrary guess */
+  jpeg_set_defaults(&cinfo);
+
+  /* Scan command line to find file names.
+   * It is convenient to use just one switch-parsing routine, but the switch
+   * values read here are ignored; we will rescan the switches after opening
+   * the input file.
+   */
+
+  file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
+
+#ifdef TWO_FILE_COMMANDLINE
+  /* Must have either -outfile switch or explicit output file name */
+  if (outfilename == NULL) {
+    if (file_index != argc-2) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+    outfilename = argv[file_index+1];
+  } else {
+    if (file_index != argc-1) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+  }
+#else
+  /* Unix style: expect zero or one file name */
+  if (file_index < argc-1) {
+    fprintf(stderr, "%s: only one input file\n", progname);
+    usage();
+  }
+#endif /* TWO_FILE_COMMANDLINE */
+
+  /* Open the input file. */
+  if (file_index < argc) {
+    if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default input file is stdin */
+    input_file = read_stdin();
+  }
+
+  /* Open the output file. */
+  if (outfilename != NULL) {
+    if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default output file is stdout */
+    output_file = write_stdout();
+  }
+
+#ifdef PROGRESS_REPORT
+  start_progress_monitor((j_common_ptr) &cinfo, &progress);
+#endif
+
+  /* Figure out the input file format, and set up to read it. */
+  src_mgr = select_file_type(&cinfo, input_file);
+  src_mgr->input_file = input_file;
+
+  /* Read the input file header to obtain file size & colorspace. */
+  (*src_mgr->start_input) (&cinfo, src_mgr);
+
+  /* Now that we know input colorspace, fix colorspace-dependent defaults */
+  jpeg_default_colorspace(&cinfo);
+
+  /* Adjust default compression parameters by re-parsing the options */
+  file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
+
+  /* Specify data destination for compression */
+  jpeg_stdio_dest(&cinfo, output_file);
+
+  /* Start compressor */
+  jpeg_start_compress(&cinfo, TRUE);
+
+  /* Process data */
+  while (cinfo.next_scanline < cinfo.image_height) {
+    num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr);
+    (void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines);
+  }
+
+  /* Finish compression and release memory */
+  (*src_mgr->finish_input) (&cinfo, src_mgr);
+  jpeg_finish_compress(&cinfo);
+  jpeg_destroy_compress(&cinfo);
+
+  /* Close files, if we opened them */
+  if (input_file != stdin)
+    fclose(input_file);
+  if (output_file != stdout)
+    fclose(output_file);
+
+#ifdef PROGRESS_REPORT
+  end_progress_monitor((j_common_ptr) &cinfo);
+#endif
+
+  /* All done. */
+  exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
+  return 0;			/* suppress no-return-value warnings */
+}