/*
 * Copyright (C) 2007 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "private/recovery.h"

#include <ctype.h>
#include <dirent.h>
#include <errno.h>
#include <fcntl.h>
#include <getopt.h>
#include <inttypes.h>
#include <limits.h>
#include <linux/fs.h>
#include <linux/input.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/klog.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <time.h>
#include <unistd.h>

#include <algorithm>
#include <functional>
#include <memory>
#include <string>
#include <vector>

#include <android-base/file.h>
#include <android-base/logging.h>
#include <android-base/parseint.h>
#include <android-base/properties.h>
#include <android-base/stringprintf.h>
#include <android-base/strings.h>
#include <android-base/unique_fd.h>
#include <bootloader_message/bootloader_message.h>
#include <cutils/android_reboot.h>
#include <cutils/properties.h> /* for property_list */
#include <healthd/BatteryMonitor.h>
#include <private/android_filesystem_config.h>  /* for AID_SYSTEM */
#include <private/android_logger.h>             /* private pmsg functions */
#include <selinux/android.h>
#include <selinux/label.h>
#include <selinux/selinux.h>
#include <ziparchive/zip_archive.h>

#include "adb_install.h"
#include "common.h"
#include "device.h"
#include "fuse_sdcard_provider.h"
#include "fuse_sideload.h"
#include "install.h"
#include "minui/minui.h"
#include "otautil/DirUtil.h"
#include "otautil/error_code.h"
#include "otautil/paths.h"
#include "roots.h"
#include "rotate_logs.h"
#include "screen_ui.h"
#include "stub_ui.h"
#include "ui.h"

static constexpr const char* CACHE_LOG_DIR = "/cache/recovery";
static constexpr const char* COMMAND_FILE = "/cache/recovery/command";
static constexpr const char* LOG_FILE = "/cache/recovery/log";
static constexpr const char* LAST_INSTALL_FILE = "/cache/recovery/last_install";
static constexpr const char* LAST_KMSG_FILE = "/cache/recovery/last_kmsg";
static constexpr const char* LAST_LOG_FILE = "/cache/recovery/last_log";
static constexpr const char* LOCALE_FILE = "/cache/recovery/last_locale";

static constexpr const char* CACHE_ROOT = "/cache";
static constexpr const char* DATA_ROOT = "/data";
static constexpr const char* METADATA_ROOT = "/metadata";
static constexpr const char* SDCARD_ROOT = "/sdcard";

// We define RECOVERY_API_VERSION in Android.mk, which will be picked up by build system and packed
// into target_files.zip. Assert the version defined in code and in Android.mk are consistent.
static_assert(kRecoveryApiVersion == RECOVERY_API_VERSION, "Mismatching recovery API versions.");

static std::string locale;
static bool has_cache = false;

RecoveryUI* ui = nullptr;
bool modified_flash = false;
std::string stage;
const char* reason = nullptr;
struct selabel_handle* sehandle;

/*
 * The recovery tool communicates with the main system through /cache files.
 *   /cache/recovery/command - INPUT - command line for tool, one arg per line
 *   /cache/recovery/log - OUTPUT - combined log file from recovery run(s)
 *
 * The arguments which may be supplied in the recovery.command file:
 *   --update_package=path - verify install an OTA package file
 *   --wipe_data - erase user data (and cache), then reboot
 *   --prompt_and_wipe_data - prompt the user that data is corrupt, with their consent erase user
 *       data (and cache), then reboot
 *   --wipe_cache - wipe cache (but not user data), then reboot
 *   --show_text - show the recovery text menu, used by some bootloader (e.g. http://b/36872519).
 *   --set_encrypted_filesystem=on|off - enables / diasables encrypted fs
 *   --just_exit - do nothing; exit and reboot
 *
 * After completing, we remove /cache/recovery/command and reboot.
 * Arguments may also be supplied in the bootloader control block (BCB).
 * These important scenarios must be safely restartable at any point:
 *
 * FACTORY RESET
 * 1. user selects "factory reset"
 * 2. main system writes "--wipe_data" to /cache/recovery/command
 * 3. main system reboots into recovery
 * 4. get_args() writes BCB with "boot-recovery" and "--wipe_data"
 *    -- after this, rebooting will restart the erase --
 * 5. erase_volume() reformats /data
 * 6. erase_volume() reformats /cache
 * 7. finish_recovery() erases BCB
 *    -- after this, rebooting will restart the main system --
 * 8. main() calls reboot() to boot main system
 *
 * OTA INSTALL
 * 1. main system downloads OTA package to /cache/some-filename.zip
 * 2. main system writes "--update_package=/cache/some-filename.zip"
 * 3. main system reboots into recovery
 * 4. get_args() writes BCB with "boot-recovery" and "--update_package=..."
 *    -- after this, rebooting will attempt to reinstall the update --
 * 5. install_package() attempts to install the update
 *    NOTE: the package install must itself be restartable from any point
 * 6. finish_recovery() erases BCB
 *    -- after this, rebooting will (try to) restart the main system --
 * 7. ** if install failed **
 *    7a. prompt_and_wait() shows an error icon and waits for the user
 *    7b. the user reboots (pulling the battery, etc) into the main system
 */

FILE* fopen_path(const std::string& path, const char* mode) {
  if (ensure_path_mounted(path.c_str()) != 0) {
    LOG(ERROR) << "Can't mount " << path;
    return nullptr;
  }

  // When writing, try to create the containing directory, if necessary. Use generous permissions,
  // the system (init.rc) will reset them.
  if (strchr("wa", mode[0])) {
    mkdir_recursively(path, 0777, true, sehandle);
  }
  return fopen(path.c_str(), mode);
}

void check_and_fclose(FILE* fp, const std::string& name) {
  fflush(fp);
  if (fsync(fileno(fp)) == -1) {
    PLOG(ERROR) << "Failed to fsync " << name;
  }
  if (ferror(fp)) {
    PLOG(ERROR) << "Error in " << name;
  }
  fclose(fp);
}

bool is_ro_debuggable() {
    return android::base::GetBoolProperty("ro.debuggable", false);
}

bool reboot(const std::string& command) {
    std::string cmd = command;
    if (android::base::GetBoolProperty("ro.boot.quiescent", false)) {
        cmd += ",quiescent";
    }
    return android::base::SetProperty(ANDROID_RB_PROPERTY, cmd);
}

// command line args come from, in decreasing precedence:
//   - the actual command line
//   - the bootloader control block (one per line, after "recovery")
//   - the contents of COMMAND_FILE (one per line)
static std::vector<std::string> get_args(const int argc, char** const argv) {
  CHECK_GT(argc, 0);

  bootloader_message boot = {};
  std::string err;
  if (!read_bootloader_message(&boot, &err)) {
    LOG(ERROR) << err;
    // If fails, leave a zeroed bootloader_message.
    boot = {};
  }
  stage = std::string(boot.stage);

  if (boot.command[0] != 0) {
    std::string boot_command = std::string(boot.command, sizeof(boot.command));
    LOG(INFO) << "Boot command: " << boot_command;
  }

  if (boot.status[0] != 0) {
    std::string boot_status = std::string(boot.status, sizeof(boot.status));
    LOG(INFO) << "Boot status: " << boot_status;
  }

  std::vector<std::string> args(argv, argv + argc);

  // --- if arguments weren't supplied, look in the bootloader control block
  if (args.size() == 1) {
    boot.recovery[sizeof(boot.recovery) - 1] = '\0';  // Ensure termination
    std::string boot_recovery(boot.recovery);
    std::vector<std::string> tokens = android::base::Split(boot_recovery, "\n");
    if (!tokens.empty() && tokens[0] == "recovery") {
      for (auto it = tokens.begin() + 1; it != tokens.end(); it++) {
        // Skip empty and '\0'-filled tokens.
        if (!it->empty() && (*it)[0] != '\0') args.push_back(std::move(*it));
      }
      LOG(INFO) << "Got " << args.size() << " arguments from boot message";
    } else if (boot.recovery[0] != 0) {
      LOG(ERROR) << "Bad boot message: \"" << boot_recovery << "\"";
    }
  }

  // --- if that doesn't work, try the command file (if we have /cache).
  if (args.size() == 1 && has_cache) {
    std::string content;
    if (ensure_path_mounted(COMMAND_FILE) == 0 &&
        android::base::ReadFileToString(COMMAND_FILE, &content)) {
      std::vector<std::string> tokens = android::base::Split(content, "\n");
      // All the arguments in COMMAND_FILE are needed (unlike the BCB message,
      // COMMAND_FILE doesn't use filename as the first argument).
      for (auto it = tokens.begin(); it != tokens.end(); it++) {
        // Skip empty and '\0'-filled tokens.
        if (!it->empty() && (*it)[0] != '\0') args.push_back(std::move(*it));
      }
      LOG(INFO) << "Got " << args.size() << " arguments from " << COMMAND_FILE;
    }
  }

  // Write the arguments (excluding the filename in args[0]) back into the
  // bootloader control block. So the device will always boot into recovery to
  // finish the pending work, until finish_recovery() is called.
  std::vector<std::string> options(args.cbegin() + 1, args.cend());
  if (!update_bootloader_message(options, &err)) {
    LOG(ERROR) << "Failed to set BCB message: " << err;
  }

  return args;
}

// Set the BCB to reboot back into recovery (it won't resume the install from
// sdcard though).
static void set_sdcard_update_bootloader_message() {
  std::vector<std::string> options;
  std::string err;
  if (!update_bootloader_message(options, &err)) {
    LOG(ERROR) << "Failed to set BCB message: " << err;
  }
}

// Read from kernel log into buffer and write out to file.
static void save_kernel_log(const char* destination) {
    int klog_buf_len = klogctl(KLOG_SIZE_BUFFER, 0, 0);
    if (klog_buf_len <= 0) {
        PLOG(ERROR) << "Error getting klog size";
        return;
    }

    std::string buffer(klog_buf_len, 0);
    int n = klogctl(KLOG_READ_ALL, &buffer[0], klog_buf_len);
    if (n == -1) {
        PLOG(ERROR) << "Error in reading klog";
        return;
    }
    buffer.resize(n);
    android::base::WriteStringToFile(buffer, destination);
}

// Writes content to the current pmsg session.
static ssize_t __pmsg_write(const std::string& filename, const std::string& buf) {
  return __android_log_pmsg_file_write(LOG_ID_SYSTEM, ANDROID_LOG_INFO, filename.c_str(),
                                       buf.data(), buf.size());
}

static void copy_log_file_to_pmsg(const std::string& source, const std::string& destination) {
  std::string content;
  android::base::ReadFileToString(source, &content);
  __pmsg_write(destination, content);
}

// How much of the temp log we have copied to the copy in cache.
static off_t tmplog_offset = 0;

static void copy_log_file(const std::string& source, const std::string& destination, bool append) {
  FILE* dest_fp = fopen_path(destination, append ? "ae" : "we");
  if (dest_fp == nullptr) {
    PLOG(ERROR) << "Can't open " << destination;
  } else {
    FILE* source_fp = fopen(source.c_str(), "re");
    if (source_fp != nullptr) {
      if (append) {
        fseeko(source_fp, tmplog_offset, SEEK_SET);  // Since last write
      }
      char buf[4096];
      size_t bytes;
      while ((bytes = fread(buf, 1, sizeof(buf), source_fp)) != 0) {
        fwrite(buf, 1, bytes, dest_fp);
      }
      if (append) {
        tmplog_offset = ftello(source_fp);
      }
      check_and_fclose(source_fp, source);
    }
    check_and_fclose(dest_fp, destination);
  }
}

static void copy_logs() {
  // We only rotate and record the log of the current session if there are actual attempts to modify
  // the flash, such as wipes, installs from BCB or menu selections. This is to avoid unnecessary
  // rotation (and possible deletion) of log files, if it does not do anything loggable.
  if (!modified_flash) {
    return;
  }

  // Always write to pmsg, this allows the OTA logs to be caught in `logcat -L`.
  copy_log_file_to_pmsg(Paths::Get().temporary_log_file(), LAST_LOG_FILE);
  copy_log_file_to_pmsg(Paths::Get().temporary_install_file(), LAST_INSTALL_FILE);

  // We can do nothing for now if there's no /cache partition.
  if (!has_cache) {
    return;
  }

  ensure_path_mounted(LAST_LOG_FILE);
  ensure_path_mounted(LAST_KMSG_FILE);
  rotate_logs(LAST_LOG_FILE, LAST_KMSG_FILE);

  // Copy logs to cache so the system can find out what happened.
  copy_log_file(Paths::Get().temporary_log_file(), LOG_FILE, true);
  copy_log_file(Paths::Get().temporary_log_file(), LAST_LOG_FILE, false);
  copy_log_file(Paths::Get().temporary_install_file(), LAST_INSTALL_FILE, false);
  save_kernel_log(LAST_KMSG_FILE);
  chmod(LOG_FILE, 0600);
  chown(LOG_FILE, AID_SYSTEM, AID_SYSTEM);
  chmod(LAST_KMSG_FILE, 0600);
  chown(LAST_KMSG_FILE, AID_SYSTEM, AID_SYSTEM);
  chmod(LAST_LOG_FILE, 0640);
  chmod(LAST_INSTALL_FILE, 0644);
  sync();
}

// Clear the recovery command and prepare to boot a (hopefully working) system,
// copy our log file to cache as well (for the system to read). This function is
// idempotent: call it as many times as you like.
static void finish_recovery() {
  // Save the locale to cache, so if recovery is next started up without a '--locale' argument
  // (e.g., directly from the bootloader) it will use the last-known locale.
  if (!locale.empty() && has_cache) {
    LOG(INFO) << "Saving locale \"" << locale << "\"";
    if (ensure_path_mounted(LOCALE_FILE) != 0) {
      LOG(ERROR) << "Failed to mount " << LOCALE_FILE;
    } else if (!android::base::WriteStringToFile(locale, LOCALE_FILE)) {
      PLOG(ERROR) << "Failed to save locale to " << LOCALE_FILE;
    }
  }

  copy_logs();

  // Reset to normal system boot so recovery won't cycle indefinitely.
  std::string err;
  if (!clear_bootloader_message(&err)) {
    LOG(ERROR) << "Failed to clear BCB message: " << err;
  }

  // Remove the command file, so recovery won't repeat indefinitely.
  if (has_cache) {
    if (ensure_path_mounted(COMMAND_FILE) != 0 || (unlink(COMMAND_FILE) && errno != ENOENT)) {
      LOG(WARNING) << "Can't unlink " << COMMAND_FILE;
    }
    ensure_path_unmounted(CACHE_ROOT);
  }

  sync();  // For good measure.
}

struct saved_log_file {
  std::string name;
  struct stat sb;
  std::string data;
};

static bool erase_volume(const char* volume) {
  bool is_cache = (strcmp(volume, CACHE_ROOT) == 0);
  bool is_data = (strcmp(volume, DATA_ROOT) == 0);

  ui->SetBackground(RecoveryUI::ERASING);
  ui->SetProgressType(RecoveryUI::INDETERMINATE);

  std::vector<saved_log_file> log_files;

  if (is_cache) {
    // If we're reformatting /cache, we load any past logs
    // (i.e. "/cache/recovery/last_*") and the current log
    // ("/cache/recovery/log") into memory, so we can restore them after
    // the reformat.

    ensure_path_mounted(volume);

    struct dirent* de;
    std::unique_ptr<DIR, decltype(&closedir)> d(opendir(CACHE_LOG_DIR), closedir);
    if (d) {
      while ((de = readdir(d.get())) != nullptr) {
        if (strncmp(de->d_name, "last_", 5) == 0 || strcmp(de->d_name, "log") == 0) {
          std::string path = android::base::StringPrintf("%s/%s", CACHE_LOG_DIR, de->d_name);

          struct stat sb;
          if (stat(path.c_str(), &sb) == 0) {
            // truncate files to 512kb
            if (sb.st_size > (1 << 19)) {
              sb.st_size = 1 << 19;
            }

            std::string data(sb.st_size, '\0');
            FILE* f = fopen(path.c_str(), "rbe");
            fread(&data[0], 1, data.size(), f);
            fclose(f);

            log_files.emplace_back(saved_log_file{ path, sb, data });
          }
        }
      }
    } else {
      if (errno != ENOENT) {
        PLOG(ERROR) << "Failed to opendir " << CACHE_LOG_DIR;
      }
    }
  }

  ui->Print("Formatting %s...\n", volume);

  ensure_path_unmounted(volume);

  int result;
  if (is_data && reason && strcmp(reason, "convert_fbe") == 0) {
    static constexpr const char* CONVERT_FBE_DIR = "/tmp/convert_fbe";
    static constexpr const char* CONVERT_FBE_FILE = "/tmp/convert_fbe/convert_fbe";
    // Create convert_fbe breadcrumb file to signal init to convert to file based encryption, not
    // full disk encryption.
    if (mkdir(CONVERT_FBE_DIR, 0700) != 0) {
      PLOG(ERROR) << "Failed to mkdir " << CONVERT_FBE_DIR;
      return false;
    }
    FILE* f = fopen(CONVERT_FBE_FILE, "wbe");
    if (!f) {
      PLOG(ERROR) << "Failed to convert to file encryption";
      return false;
    }
    fclose(f);
    result = format_volume(volume, CONVERT_FBE_DIR);
    remove(CONVERT_FBE_FILE);
    rmdir(CONVERT_FBE_DIR);
  } else {
    result = format_volume(volume);
  }

  if (is_cache) {
    // Re-create the log dir and write back the log entries.
    if (ensure_path_mounted(CACHE_LOG_DIR) == 0 &&
        mkdir_recursively(CACHE_LOG_DIR, 0777, false, sehandle) == 0) {
      for (const auto& log : log_files) {
        if (!android::base::WriteStringToFile(log.data, log.name, log.sb.st_mode, log.sb.st_uid,
                                              log.sb.st_gid)) {
          PLOG(ERROR) << "Failed to write to " << log.name;
        }
      }
    } else {
      PLOG(ERROR) << "Failed to mount / create " << CACHE_LOG_DIR;
    }

    // Any part of the log we'd copied to cache is now gone.
    // Reset the pointer so we copy from the beginning of the temp
    // log.
    tmplog_offset = 0;
    copy_logs();
  }

  return (result == 0);
}

// Returns the selected filename, or an empty string.
static std::string browse_directory(const std::string& path, Device* device) {
  ensure_path_mounted(path.c_str());

  std::unique_ptr<DIR, decltype(&closedir)> d(opendir(path.c_str()), closedir);
  if (!d) {
    PLOG(ERROR) << "error opening " << path;
    return "";
  }

  std::vector<std::string> dirs;
  std::vector<std::string> zips = { "../" };  // "../" is always the first entry.

  dirent* de;
  while ((de = readdir(d.get())) != nullptr) {
    std::string name(de->d_name);

    if (de->d_type == DT_DIR) {
      // Skip "." and ".." entries.
      if (name == "." || name == "..") continue;
      dirs.push_back(name + "/");
    } else if (de->d_type == DT_REG && android::base::EndsWithIgnoreCase(name, ".zip")) {
      zips.push_back(name);
    }
  }

  std::sort(dirs.begin(), dirs.end());
  std::sort(zips.begin(), zips.end());

  // Append dirs to the zips list.
  zips.insert(zips.end(), dirs.begin(), dirs.end());

  const char* entries[zips.size() + 1];
  entries[zips.size()] = nullptr;
  for (size_t i = 0; i < zips.size(); i++) {
    entries[i] = zips[i].c_str();
  }

  const char* headers[] = { "Choose a package to install:", path.c_str(), nullptr };

  int chosen_item = 0;
  while (true) {
    chosen_item = ui->ShowMenu(
        headers, entries, chosen_item, true,
        std::bind(&Device::HandleMenuKey, device, std::placeholders::_1, std::placeholders::_2));

    const std::string& item = zips[chosen_item];
    if (chosen_item == 0) {
      // Go up but continue browsing (if the caller is browse_directory).
      return "";
    }

    std::string new_path = path + "/" + item;
    if (new_path.back() == '/') {
      // Recurse down into a subdirectory.
      new_path.pop_back();
      std::string result = browse_directory(new_path, device);
      if (!result.empty()) return result;
    } else {
      // Selected a zip file: return the path to the caller.
      return new_path;
    }
  }

  // Unreachable.
}

static bool yes_no(Device* device, const char* question1, const char* question2) {
  const char* headers[] = { question1, question2, NULL };
  const char* items[] = { " No", " Yes", NULL };

  int chosen_item = ui->ShowMenu(
      headers, items, 0, true,
      std::bind(&Device::HandleMenuKey, device, std::placeholders::_1, std::placeholders::_2));
  return (chosen_item == 1);
}

static bool ask_to_wipe_data(Device* device) {
  return yes_no(device, "Wipe all user data?", "  THIS CAN NOT BE UNDONE!");
}

// Return true on success.
static bool wipe_data(Device* device) {
    modified_flash = true;

    ui->Print("\n-- Wiping data...\n");
    bool success = device->PreWipeData();
    if (success) {
      success &= erase_volume(DATA_ROOT);
      if (has_cache) {
        success &= erase_volume(CACHE_ROOT);
      }
      if (volume_for_mount_point(METADATA_ROOT) != nullptr) {
        success &= erase_volume(METADATA_ROOT);
      }
    }
    if (success) {
      success &= device->PostWipeData();
    }
    ui->Print("Data wipe %s.\n", success ? "complete" : "failed");
    return success;
}

static bool prompt_and_wipe_data(Device* device) {
  // Use a single string and let ScreenRecoveryUI handles the wrapping.
  const char* const headers[] = {
    "Can't load Android system. Your data may be corrupt. "
    "If you continue to get this message, you may need to "
    "perform a factory data reset and erase all user data "
    "stored on this device.",
    nullptr
  };
  const char* const items[] = {
    "Try again",
    "Factory data reset",
    NULL
  };
  for (;;) {
    int chosen_item = ui->ShowMenu(
        headers, items, 0, true,
        std::bind(&Device::HandleMenuKey, device, std::placeholders::_1, std::placeholders::_2));
    if (chosen_item != 1) {
      return true;  // Just reboot, no wipe; not a failure, user asked for it
    }
    if (ask_to_wipe_data(device)) {
      return wipe_data(device);
    }
  }
}

// Return true on success.
static bool wipe_cache(bool should_confirm, Device* device) {
    if (!has_cache) {
        ui->Print("No /cache partition found.\n");
        return false;
    }

    if (should_confirm && !yes_no(device, "Wipe cache?", "  THIS CAN NOT BE UNDONE!")) {
        return false;
    }

    modified_flash = true;

    ui->Print("\n-- Wiping cache...\n");
    bool success = erase_volume("/cache");
    ui->Print("Cache wipe %s.\n", success ? "complete" : "failed");
    return success;
}

// Secure-wipe a given partition. It uses BLKSECDISCARD, if supported. Otherwise, it goes with
// BLKDISCARD (if device supports BLKDISCARDZEROES) or BLKZEROOUT.
static bool secure_wipe_partition(const std::string& partition) {
  android::base::unique_fd fd(TEMP_FAILURE_RETRY(open(partition.c_str(), O_WRONLY)));
  if (fd == -1) {
    PLOG(ERROR) << "Failed to open \"" << partition << "\"";
    return false;
  }

  uint64_t range[2] = { 0, 0 };
  if (ioctl(fd, BLKGETSIZE64, &range[1]) == -1 || range[1] == 0) {
    PLOG(ERROR) << "Failed to get partition size";
    return false;
  }
  LOG(INFO) << "Secure-wiping \"" << partition << "\" from " << range[0] << " to " << range[1];

  LOG(INFO) << "  Trying BLKSECDISCARD...";
  if (ioctl(fd, BLKSECDISCARD, &range) == -1) {
    PLOG(WARNING) << "  Failed";

    // Use BLKDISCARD if it zeroes out blocks, otherwise use BLKZEROOUT.
    unsigned int zeroes;
    if (ioctl(fd, BLKDISCARDZEROES, &zeroes) == 0 && zeroes != 0) {
      LOG(INFO) << "  Trying BLKDISCARD...";
      if (ioctl(fd, BLKDISCARD, &range) == -1) {
        PLOG(ERROR) << "  Failed";
        return false;
      }
    } else {
      LOG(INFO) << "  Trying BLKZEROOUT...";
      if (ioctl(fd, BLKZEROOUT, &range) == -1) {
        PLOG(ERROR) << "  Failed";
        return false;
      }
    }
  }

  LOG(INFO) << "  Done";
  return true;
}

// Check if the wipe package matches expectation:
// 1. verify the package.
// 2. check metadata (ota-type, pre-device and serial number if having one).
static bool check_wipe_package(size_t wipe_package_size) {
    if (wipe_package_size == 0) {
        LOG(ERROR) << "wipe_package_size is zero";
        return false;
    }
    std::string wipe_package;
    std::string err_str;
    if (!read_wipe_package(&wipe_package, wipe_package_size, &err_str)) {
        PLOG(ERROR) << "Failed to read wipe package";
        return false;
    }
    if (!verify_package(reinterpret_cast<const unsigned char*>(wipe_package.data()),
                        wipe_package.size())) {
        LOG(ERROR) << "Failed to verify package";
        return false;
    }

    // Extract metadata
    ZipArchiveHandle zip;
    int err = OpenArchiveFromMemory(static_cast<void*>(&wipe_package[0]), wipe_package.size(),
                                    "wipe_package", &zip);
    if (err != 0) {
        LOG(ERROR) << "Can't open wipe package : " << ErrorCodeString(err);
        return false;
    }
    std::string metadata;
    if (!read_metadata_from_package(zip, &metadata)) {
        CloseArchive(zip);
        return false;
    }
    CloseArchive(zip);

    // Check metadata
    std::vector<std::string> lines = android::base::Split(metadata, "\n");
    bool ota_type_matched = false;
    bool device_type_matched = false;
    bool has_serial_number = false;
    bool serial_number_matched = false;
    for (const auto& line : lines) {
        if (line == "ota-type=BRICK") {
            ota_type_matched = true;
        } else if (android::base::StartsWith(line, "pre-device=")) {
            std::string device_type = line.substr(strlen("pre-device="));
            std::string real_device_type = android::base::GetProperty("ro.build.product", "");
            device_type_matched = (device_type == real_device_type);
        } else if (android::base::StartsWith(line, "serialno=")) {
            std::string serial_no = line.substr(strlen("serialno="));
            std::string real_serial_no = android::base::GetProperty("ro.serialno", "");
            has_serial_number = true;
            serial_number_matched = (serial_no == real_serial_no);
        }
    }
    return ota_type_matched && device_type_matched && (!has_serial_number || serial_number_matched);
}

// Wipes the current A/B device, with a secure wipe of all the partitions in RECOVERY_WIPE.
static bool wipe_ab_device(size_t wipe_package_size) {
  ui->SetBackground(RecoveryUI::ERASING);
  ui->SetProgressType(RecoveryUI::INDETERMINATE);

  if (!check_wipe_package(wipe_package_size)) {
    LOG(ERROR) << "Failed to verify wipe package";
    return false;
  }
  static constexpr const char* RECOVERY_WIPE = "/etc/recovery.wipe";
  std::string partition_list;
  if (!android::base::ReadFileToString(RECOVERY_WIPE, &partition_list)) {
    LOG(ERROR) << "failed to read \"" << RECOVERY_WIPE << "\"";
    return false;
  }

  std::vector<std::string> lines = android::base::Split(partition_list, "\n");
  for (const std::string& line : lines) {
    std::string partition = android::base::Trim(line);
    // Ignore '#' comment or empty lines.
    if (android::base::StartsWith(partition, "#") || partition.empty()) {
      continue;
    }

    // Proceed anyway even if it fails to wipe some partition.
    secure_wipe_partition(partition);
  }
  return true;
}

static void choose_recovery_file(Device* device) {
  std::vector<std::string> entries;
  if (has_cache) {
    for (int i = 0; i < KEEP_LOG_COUNT; i++) {
      auto add_to_entries = [&](const char* filename) {
        std::string log_file(filename);
        if (i > 0) {
          log_file += "." + std::to_string(i);
        }

        if (ensure_path_mounted(log_file.c_str()) == 0 && access(log_file.c_str(), R_OK) == 0) {
          entries.push_back(std::move(log_file));
        }
      };

      // Add LAST_LOG_FILE + LAST_LOG_FILE.x
      add_to_entries(LAST_LOG_FILE);

      // Add LAST_KMSG_FILE + LAST_KMSG_FILE.x
      add_to_entries(LAST_KMSG_FILE);
    }
  } else {
    // If cache partition is not found, view /tmp/recovery.log instead.
    if (access(Paths::Get().temporary_log_file().c_str(), R_OK) == -1) {
      return;
    } else {
      entries.push_back(Paths::Get().temporary_log_file());
    }
  }

  entries.push_back("Back");

  std::vector<const char*> menu_entries(entries.size());
  std::transform(entries.cbegin(), entries.cend(), menu_entries.begin(),
                 [](const std::string& entry) { return entry.c_str(); });
  menu_entries.push_back(nullptr);

  const char* headers[] = { "Select file to view", nullptr };

  int chosen_item = 0;
  while (true) {
    chosen_item = ui->ShowMenu(
        headers, menu_entries.data(), chosen_item, true,
        std::bind(&Device::HandleMenuKey, device, std::placeholders::_1, std::placeholders::_2));
    if (entries[chosen_item] == "Back") break;

    ui->ShowFile(entries[chosen_item]);
  }
}

static void run_graphics_test() {
  // Switch to graphics screen.
  ui->ShowText(false);

  ui->SetProgressType(RecoveryUI::INDETERMINATE);
  ui->SetBackground(RecoveryUI::INSTALLING_UPDATE);
  sleep(1);

  ui->SetBackground(RecoveryUI::ERROR);
  sleep(1);

  ui->SetBackground(RecoveryUI::NO_COMMAND);
  sleep(1);

  ui->SetBackground(RecoveryUI::ERASING);
  sleep(1);

  // Calling SetBackground() after SetStage() to trigger a redraw.
  ui->SetStage(1, 3);
  ui->SetBackground(RecoveryUI::INSTALLING_UPDATE);
  sleep(1);
  ui->SetStage(2, 3);
  ui->SetBackground(RecoveryUI::INSTALLING_UPDATE);
  sleep(1);
  ui->SetStage(3, 3);
  ui->SetBackground(RecoveryUI::INSTALLING_UPDATE);
  sleep(1);

  ui->SetStage(-1, -1);
  ui->SetBackground(RecoveryUI::INSTALLING_UPDATE);

  ui->SetProgressType(RecoveryUI::DETERMINATE);
  ui->ShowProgress(1.0, 10.0);
  float fraction = 0.0;
  for (size_t i = 0; i < 100; ++i) {
    fraction += .01;
    ui->SetProgress(fraction);
    usleep(100000);
  }

  ui->ShowText(true);
}

// How long (in seconds) we wait for the fuse-provided package file to
// appear, before timing out.
#define SDCARD_INSTALL_TIMEOUT 10

static int apply_from_sdcard(Device* device, bool* wipe_cache) {
    modified_flash = true;

    if (ensure_path_mounted(SDCARD_ROOT) != 0) {
        ui->Print("\n-- Couldn't mount %s.\n", SDCARD_ROOT);
        return INSTALL_ERROR;
    }

    std::string path = browse_directory(SDCARD_ROOT, device);
    if (path.empty()) {
        ui->Print("\n-- No package file selected.\n");
        ensure_path_unmounted(SDCARD_ROOT);
        return INSTALL_ERROR;
    }

    ui->Print("\n-- Install %s ...\n", path.c_str());
    set_sdcard_update_bootloader_message();

    // We used to use fuse in a thread as opposed to a process. Since accessing
    // through fuse involves going from kernel to userspace to kernel, it leads
    // to deadlock when a page fault occurs. (Bug: 26313124)
    pid_t child;
    if ((child = fork()) == 0) {
        bool status = start_sdcard_fuse(path.c_str());

        _exit(status ? EXIT_SUCCESS : EXIT_FAILURE);
    }

    // FUSE_SIDELOAD_HOST_PATHNAME will start to exist once the fuse in child
    // process is ready.
    int result = INSTALL_ERROR;
    int status;
    bool waited = false;
    for (int i = 0; i < SDCARD_INSTALL_TIMEOUT; ++i) {
        if (waitpid(child, &status, WNOHANG) == -1) {
            result = INSTALL_ERROR;
            waited = true;
            break;
        }

        struct stat sb;
        if (stat(FUSE_SIDELOAD_HOST_PATHNAME, &sb) == -1) {
            if (errno == ENOENT && i < SDCARD_INSTALL_TIMEOUT-1) {
                sleep(1);
                continue;
            } else {
                LOG(ERROR) << "Timed out waiting for the fuse-provided package.";
                result = INSTALL_ERROR;
                kill(child, SIGKILL);
                break;
            }
        }

        result = install_package(FUSE_SIDELOAD_HOST_PATHNAME, wipe_cache, false, 0 /*retry_count*/);
        break;
    }

    if (!waited) {
        // Calling stat() on this magic filename signals the fuse
        // filesystem to shut down.
        struct stat sb;
        stat(FUSE_SIDELOAD_HOST_EXIT_PATHNAME, &sb);

        waitpid(child, &status, 0);
    }

    if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) {
        LOG(ERROR) << "Error exit from the fuse process: " << WEXITSTATUS(status);
    }

    ensure_path_unmounted(SDCARD_ROOT);
    return result;
}

// Returns REBOOT, SHUTDOWN, or REBOOT_BOOTLOADER. Returning NO_ACTION means to take the default,
// which is to reboot or shutdown depending on if the --shutdown_after flag was passed to recovery.
static Device::BuiltinAction prompt_and_wait(Device* device, int status) {
  for (;;) {
    finish_recovery();
    switch (status) {
      case INSTALL_SUCCESS:
      case INSTALL_NONE:
        ui->SetBackground(RecoveryUI::NO_COMMAND);
        break;

      case INSTALL_ERROR:
      case INSTALL_CORRUPT:
        ui->SetBackground(RecoveryUI::ERROR);
        break;
    }
    ui->SetProgressType(RecoveryUI::EMPTY);

    int chosen_item = ui->ShowMenu(
        nullptr, device->GetMenuItems(), 0, false,
        std::bind(&Device::HandleMenuKey, device, std::placeholders::_1, std::placeholders::_2));

    // Device-specific code may take some action here. It may return one of the core actions
    // handled in the switch statement below.
    Device::BuiltinAction chosen_action =
        (chosen_item == -1) ? Device::REBOOT : device->InvokeMenuItem(chosen_item);

    bool should_wipe_cache = false;
    switch (chosen_action) {
      case Device::NO_ACTION:
        break;

      case Device::REBOOT:
      case Device::SHUTDOWN:
      case Device::REBOOT_BOOTLOADER:
        return chosen_action;

      case Device::WIPE_DATA:
        if (ui->IsTextVisible()) {
          if (ask_to_wipe_data(device)) {
            wipe_data(device);
          }
        } else {
          wipe_data(device);
          return Device::NO_ACTION;
        }
        break;

      case Device::WIPE_CACHE:
        wipe_cache(ui->IsTextVisible(), device);
        if (!ui->IsTextVisible()) return Device::NO_ACTION;
        break;

      case Device::APPLY_ADB_SIDELOAD:
      case Device::APPLY_SDCARD:
        {
          bool adb = (chosen_action == Device::APPLY_ADB_SIDELOAD);
          if (adb) {
            status = apply_from_adb(&should_wipe_cache);
          } else {
            status = apply_from_sdcard(device, &should_wipe_cache);
          }

          if (status == INSTALL_SUCCESS && should_wipe_cache) {
            if (!wipe_cache(false, device)) {
              status = INSTALL_ERROR;
            }
          }

          if (status != INSTALL_SUCCESS) {
            ui->SetBackground(RecoveryUI::ERROR);
            ui->Print("Installation aborted.\n");
            copy_logs();
          } else if (!ui->IsTextVisible()) {
            return Device::NO_ACTION;  // reboot if logs aren't visible
          } else {
            ui->Print("\nInstall from %s complete.\n", adb ? "ADB" : "SD card");
          }
        }
        break;

      case Device::VIEW_RECOVERY_LOGS:
        choose_recovery_file(device);
        break;

      case Device::RUN_GRAPHICS_TEST:
        run_graphics_test();
        break;

      case Device::RUN_LOCALE_TEST: {
        ScreenRecoveryUI* screen_ui = static_cast<ScreenRecoveryUI*>(ui);
        screen_ui->CheckBackgroundTextImages(locale);
        break;
      }
      case Device::MOUNT_SYSTEM:
        // For a system image built with the root directory (i.e. system_root_image == "true"), we
        // mount it to /system_root, and symlink /system to /system_root/system to make adb shell
        // work (the symlink is created through the build system). (Bug: 22855115)
        if (android::base::GetBoolProperty("ro.build.system_root_image", false)) {
          if (ensure_path_mounted_at("/", "/system_root") != -1) {
            ui->Print("Mounted /system.\n");
          }
        } else {
          if (ensure_path_mounted("/system") != -1) {
            ui->Print("Mounted /system.\n");
          }
        }
        break;
    }
  }
}

static void print_property(const char* key, const char* name, void* /* cookie */) {
  printf("%s=%s\n", key, name);
}

static std::string load_locale_from_cache() {
    if (ensure_path_mounted(LOCALE_FILE) != 0) {
        LOG(ERROR) << "Can't mount " << LOCALE_FILE;
        return "";
    }

    std::string content;
    if (!android::base::ReadFileToString(LOCALE_FILE, &content)) {
        PLOG(ERROR) << "Can't read " << LOCALE_FILE;
        return "";
    }

    return android::base::Trim(content);
}

void ui_print(const char* format, ...) {
    std::string buffer;
    va_list ap;
    va_start(ap, format);
    android::base::StringAppendV(&buffer, format, ap);
    va_end(ap);

    if (ui != nullptr) {
        ui->Print("%s", buffer.c_str());
    } else {
        fputs(buffer.c_str(), stdout);
    }
}

static bool is_battery_ok(int* required_battery_level) {
  struct healthd_config healthd_config = {
    .batteryStatusPath = android::String8(android::String8::kEmptyString),
    .batteryHealthPath = android::String8(android::String8::kEmptyString),
    .batteryPresentPath = android::String8(android::String8::kEmptyString),
    .batteryCapacityPath = android::String8(android::String8::kEmptyString),
    .batteryVoltagePath = android::String8(android::String8::kEmptyString),
    .batteryTemperaturePath = android::String8(android::String8::kEmptyString),
    .batteryTechnologyPath = android::String8(android::String8::kEmptyString),
    .batteryCurrentNowPath = android::String8(android::String8::kEmptyString),
    .batteryCurrentAvgPath = android::String8(android::String8::kEmptyString),
    .batteryChargeCounterPath = android::String8(android::String8::kEmptyString),
    .batteryFullChargePath = android::String8(android::String8::kEmptyString),
    .batteryCycleCountPath = android::String8(android::String8::kEmptyString),
    .energyCounter = nullptr,
    .boot_min_cap = 0,
    .screen_on = nullptr
  };
  healthd_board_init(&healthd_config);

  android::BatteryMonitor monitor;
  monitor.init(&healthd_config);

  static constexpr int BATTERY_READ_TIMEOUT_IN_SEC = 10;
  int wait_second = 0;
  while (true) {
    int charge_status = monitor.getChargeStatus();
    // Treat unknown status as charged.
    bool charged = (charge_status != android::BATTERY_STATUS_DISCHARGING &&
                    charge_status != android::BATTERY_STATUS_NOT_CHARGING);
    android::BatteryProperty capacity;
    android::status_t status = monitor.getProperty(android::BATTERY_PROP_CAPACITY, &capacity);
    ui_print("charge_status %d, charged %d, status %d, capacity %" PRId64 "\n", charge_status,
             charged, status, capacity.valueInt64);
    // At startup, the battery drivers in devices like N5X/N6P take some time to load
    // the battery profile. Before the load finishes, it reports value 50 as a fake
    // capacity. BATTERY_READ_TIMEOUT_IN_SEC is set that the battery drivers are expected
    // to finish loading the battery profile earlier than 10 seconds after kernel startup.
    if (status == 0 && capacity.valueInt64 == 50) {
      if (wait_second < BATTERY_READ_TIMEOUT_IN_SEC) {
        sleep(1);
        wait_second++;
        continue;
      }
    }
    // If we can't read battery percentage, it may be a device without battery. In this situation,
    // use 100 as a fake battery percentage.
    if (status != 0) {
      capacity.valueInt64 = 100;
    }

    // GmsCore enters recovery mode to install package when having enough battery percentage.
    // Normally, the threshold is 40% without charger and 20% with charger. So we should check
    // battery with a slightly lower limitation.
    static constexpr int BATTERY_OK_PERCENTAGE = 20;
    static constexpr int BATTERY_WITH_CHARGER_OK_PERCENTAGE = 15;
    *required_battery_level = charged ? BATTERY_WITH_CHARGER_OK_PERCENTAGE : BATTERY_OK_PERCENTAGE;
    return capacity.valueInt64 >= *required_battery_level;
  }
}

// Set the retry count to |retry_count| in BCB.
static void set_retry_bootloader_message(int retry_count, const std::vector<std::string>& args) {
  std::vector<std::string> options;
  for (const auto& arg : args) {
    if (!android::base::StartsWith(arg, "--retry_count")) {
      options.push_back(arg);
    }
  }

  // Update the retry counter in BCB.
  options.push_back(android::base::StringPrintf("--retry_count=%d", retry_count));
  std::string err;
  if (!update_bootloader_message(options, &err)) {
    LOG(ERROR) << err;
  }
}

static bool bootreason_in_blacklist() {
  std::string bootreason = android::base::GetProperty("ro.boot.bootreason", "");
  if (!bootreason.empty()) {
    // More bootreasons can be found in "system/core/bootstat/bootstat.cpp".
    static const std::vector<std::string> kBootreasonBlacklist{
      "kernel_panic",
      "Panic",
    };
    for (const auto& str : kBootreasonBlacklist) {
      if (android::base::EqualsIgnoreCase(str, bootreason)) return true;
    }
  }
  return false;
}

static void log_failure_code(ErrorCode code, const std::string& update_package) {
  std::vector<std::string> log_buffer = {
    update_package,
    "0",  // install result
    "error: " + std::to_string(code),
  };
  std::string log_content = android::base::Join(log_buffer, "\n");
  const std::string& install_file = Paths::Get().temporary_install_file();
  if (!android::base::WriteStringToFile(log_content, install_file)) {
    PLOG(ERROR) << "Failed to write " << install_file;
  }

  // Also write the info into last_log.
  LOG(INFO) << log_content;
}

int start_recovery(int argc, char** argv) {
  time_t start = time(nullptr);

  printf("Starting recovery (pid %d) on %s", getpid(), ctime(&start));

  load_volume_table();
  has_cache = volume_for_mount_point(CACHE_ROOT) != nullptr;

  std::vector<std::string> args = get_args(argc, argv);
  std::vector<char*> args_to_parse(args.size());
  std::transform(args.cbegin(), args.cend(), args_to_parse.begin(),
                 [](const std::string& arg) { return const_cast<char*>(arg.c_str()); });

  static constexpr struct option OPTIONS[] = {
    { "just_exit", no_argument, nullptr, 'x' },
    { "locale", required_argument, nullptr, 0 },
    { "prompt_and_wipe_data", no_argument, nullptr, 0 },
    { "reason", required_argument, nullptr, 0 },
    { "retry_count", required_argument, nullptr, 0 },
    { "security", no_argument, nullptr, 0 },
    { "show_text", no_argument, nullptr, 't' },
    { "shutdown_after", no_argument, nullptr, 0 },
    { "sideload", no_argument, nullptr, 0 },
    { "sideload_auto_reboot", no_argument, nullptr, 0 },
    { "update_package", required_argument, nullptr, 0 },
    { "wipe_ab", no_argument, nullptr, 0 },
    { "wipe_cache", no_argument, nullptr, 0 },
    { "wipe_data", no_argument, nullptr, 0 },
    { "wipe_package_size", required_argument, nullptr, 0 },
    { nullptr, 0, nullptr, 0 },
  };

  const char* update_package = nullptr;
  bool should_wipe_data = false;
  bool should_prompt_and_wipe_data = false;
  bool should_wipe_cache = false;
  bool should_wipe_ab = false;
  size_t wipe_package_size = 0;
  bool show_text = false;
  bool sideload = false;
  bool sideload_auto_reboot = false;
  bool just_exit = false;
  bool shutdown_after = false;
  int retry_count = 0;
  bool security_update = false;

  int arg;
  int option_index;
  while ((arg = getopt_long(args_to_parse.size(), args_to_parse.data(), "", OPTIONS,
                            &option_index)) != -1) {
    switch (arg) {
      case 't':
        show_text = true;
        break;
      case 'x':
        just_exit = true;
        break;
      case 0: {
        std::string option = OPTIONS[option_index].name;
        if (option == "locale") {
          locale = optarg;
        } else if (option == "prompt_and_wipe_data") {
          should_prompt_and_wipe_data = true;
        } else if (option == "reason") {
          reason = optarg;
        } else if (option == "retry_count") {
          android::base::ParseInt(optarg, &retry_count, 0);
        } else if (option == "security") {
          security_update = true;
        } else if (option == "sideload") {
          sideload = true;
        } else if (option == "sideload_auto_reboot") {
          sideload = true;
          sideload_auto_reboot = true;
        } else if (option == "shutdown_after") {
          shutdown_after = true;
        } else if (option == "update_package") {
          update_package = optarg;
        } else if (option == "wipe_ab") {
          should_wipe_ab = true;
        } else if (option == "wipe_cache") {
          should_wipe_cache = true;
        } else if (option == "wipe_data") {
          should_wipe_data = true;
        } else if (option == "wipe_package_size") {
          android::base::ParseUint(optarg, &wipe_package_size);
        }
        break;
      }
      case '?':
        LOG(ERROR) << "Invalid command argument";
        continue;
    }
  }

  if (locale.empty()) {
    if (has_cache) {
      locale = load_locale_from_cache();
    }

    if (locale.empty()) {
      static constexpr const char* DEFAULT_LOCALE = "en-US";
      locale = DEFAULT_LOCALE;
    }
  }

  printf("locale is [%s]\n", locale.c_str());
  printf("stage is [%s]\n", stage.c_str());
  printf("reason is [%s]\n", reason);

  Device* device = make_device();
  if (android::base::GetBoolProperty("ro.boot.quiescent", false)) {
    printf("Quiescent recovery mode.\n");
    ui = new StubRecoveryUI();
  } else {
    ui = device->GetUI();

    if (!ui->Init(locale)) {
      printf("Failed to initialize UI, use stub UI instead.\n");
      ui = new StubRecoveryUI();
    }
  }

  // Set background string to "installing security update" for security update,
  // otherwise set it to "installing system update".
  ui->SetSystemUpdateText(security_update);

  int st_cur, st_max;
  if (!stage.empty() && sscanf(stage.c_str(), "%d/%d", &st_cur, &st_max) == 2) {
    ui->SetStage(st_cur, st_max);
  }

  ui->SetBackground(RecoveryUI::NONE);
  if (show_text) ui->ShowText(true);

  sehandle = selinux_android_file_context_handle();
  selinux_android_set_sehandle(sehandle);
  if (!sehandle) {
    ui->Print("Warning: No file_contexts\n");
  }

  device->StartRecovery();

  printf("Command:");
  for (const auto& arg : args) {
    printf(" \"%s\"", arg.c_str());
  }
  printf("\n\n");

  property_list(print_property, nullptr);
  printf("\n");

  ui->Print("Supported API: %d\n", kRecoveryApiVersion);

  int status = INSTALL_SUCCESS;

  if (update_package != nullptr) {
    // It's not entirely true that we will modify the flash. But we want
    // to log the update attempt since update_package is non-NULL.
    modified_flash = true;

    int required_battery_level;
    if (retry_count == 0 && !is_battery_ok(&required_battery_level)) {
      ui->Print("battery capacity is not enough for installing package: %d%% needed\n",
                required_battery_level);
      // Log the error code to last_install when installation skips due to
      // low battery.
      log_failure_code(kLowBattery, update_package);
      status = INSTALL_SKIPPED;
    } else if (retry_count == 0 && bootreason_in_blacklist()) {
      // Skip update-on-reboot when bootreason is kernel_panic or similar
      ui->Print("bootreason is in the blacklist; skip OTA installation\n");
      log_failure_code(kBootreasonInBlacklist, update_package);
      status = INSTALL_SKIPPED;
    } else {
      // It's a fresh update. Initialize the retry_count in the BCB to 1; therefore we can later
      // identify the interrupted update due to unexpected reboots.
      if (retry_count == 0) {
        set_retry_bootloader_message(retry_count + 1, args);
      }

      status = install_package(update_package, &should_wipe_cache, true, retry_count);
      if (status == INSTALL_SUCCESS && should_wipe_cache) {
        wipe_cache(false, device);
      }
      if (status != INSTALL_SUCCESS) {
        ui->Print("Installation aborted.\n");

        // When I/O error or bspatch/imgpatch error happens, reboot and retry installation
        // RETRY_LIMIT times before we abandon this OTA update.
        static constexpr int RETRY_LIMIT = 4;
        if (status == INSTALL_RETRY && retry_count < RETRY_LIMIT) {
          copy_logs();
          retry_count += 1;
          set_retry_bootloader_message(retry_count, args);
          // Print retry count on screen.
          ui->Print("Retry attempt %d\n", retry_count);

          // Reboot and retry the update
          if (!reboot("reboot,recovery")) {
            ui->Print("Reboot failed\n");
          } else {
            while (true) {
              pause();
            }
          }
        }
        // If this is an eng or userdebug build, then automatically
        // turn the text display on if the script fails so the error
        // message is visible.
        if (is_ro_debuggable()) {
          ui->ShowText(true);
        }
      }
    }
  } else if (should_wipe_data) {
    if (!wipe_data(device)) {
      status = INSTALL_ERROR;
    }
  } else if (should_prompt_and_wipe_data) {
    ui->ShowText(true);
    ui->SetBackground(RecoveryUI::ERROR);
    if (!prompt_and_wipe_data(device)) {
      status = INSTALL_ERROR;
    }
    ui->ShowText(false);
  } else if (should_wipe_cache) {
    if (!wipe_cache(false, device)) {
      status = INSTALL_ERROR;
    }
  } else if (should_wipe_ab) {
    if (!wipe_ab_device(wipe_package_size)) {
      status = INSTALL_ERROR;
    }
  } else if (sideload) {
    // 'adb reboot sideload' acts the same as user presses key combinations
    // to enter the sideload mode. When 'sideload-auto-reboot' is used, text
    // display will NOT be turned on by default. And it will reboot after
    // sideload finishes even if there are errors. Unless one turns on the
    // text display during the installation. This is to enable automated
    // testing.
    if (!sideload_auto_reboot) {
      ui->ShowText(true);
    }
    status = apply_from_adb(&should_wipe_cache);
    if (status == INSTALL_SUCCESS && should_wipe_cache) {
      if (!wipe_cache(false, device)) {
        status = INSTALL_ERROR;
      }
    }
    ui->Print("\nInstall from ADB complete (status: %d).\n", status);
    if (sideload_auto_reboot) {
      ui->Print("Rebooting automatically.\n");
    }
  } else if (!just_exit) {
    // If this is an eng or userdebug build, automatically turn on the text display if no command
    // is specified. Note that this should be called before setting the background to avoid
    // flickering the background image.
    if (is_ro_debuggable()) {
      ui->ShowText(true);
    }
    status = INSTALL_NONE;  // No command specified
    ui->SetBackground(RecoveryUI::NO_COMMAND);
  }

  if (status == INSTALL_ERROR || status == INSTALL_CORRUPT) {
    ui->SetBackground(RecoveryUI::ERROR);
    if (!ui->IsTextVisible()) {
      sleep(5);
    }
  }

  Device::BuiltinAction after = shutdown_after ? Device::SHUTDOWN : Device::REBOOT;
  // 1. If the recovery menu is visible, prompt and wait for commands.
  // 2. If the state is INSTALL_NONE, wait for commands. (i.e. In user build, manually reboot into
  //    recovery to sideload a package.)
  // 3. sideload_auto_reboot is an option only available in user-debug build, reboot the device
  //    without waiting.
  // 4. In all other cases, reboot the device. Therefore, normal users will observe the device
  //    reboot after it shows the "error" screen for 5s.
  if ((status == INSTALL_NONE && !sideload_auto_reboot) || ui->IsTextVisible()) {
    Device::BuiltinAction temp = prompt_and_wait(device, status);
    if (temp != Device::NO_ACTION) {
      after = temp;
    }
  }

  // Save logs and clean up before rebooting or shutting down.
  finish_recovery();

  switch (after) {
    case Device::SHUTDOWN:
      ui->Print("Shutting down...\n");
      android::base::SetProperty(ANDROID_RB_PROPERTY, "shutdown,");
      break;

    case Device::REBOOT_BOOTLOADER:
      ui->Print("Rebooting to bootloader...\n");
      android::base::SetProperty(ANDROID_RB_PROPERTY, "reboot,bootloader");
      break;

    default:
      ui->Print("Rebooting...\n");
      reboot("reboot,");
      break;
  }
  while (true) {
    pause();
  }
  // Should be unreachable.
  return EXIT_SUCCESS;
}