[automerger skipped] Import translations. DO NOT MERGE ANYWHERE am: 3705aa8cd4 -s ours am: 8a62b716f6 -s ours
am skip reason: subject contains skip directive
Original change: https://googleplex-android-review.googlesource.com/c/platform/bootable/recovery/+/19842875
Change-Id: I64dd8277fa819a9d6391545931bf90ba22bc1fe2
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>
diff --git a/Android.bp b/Android.bp
index bd95705..4cdeba0 100644
--- a/Android.bp
+++ b/Android.bp
@@ -94,6 +94,8 @@
shared_libs: [
"android.hardware.boot@1.0",
"android.hardware.boot@1.1",
+ "android.hardware.boot-V1-ndk",
+ "libboot_control_client",
"libbase",
"libbootloader_message",
"libcrypto",
@@ -113,6 +115,8 @@
"librecovery_utils",
"libotautil",
"libsnapshot_nobinder",
+ "libsnapshot_cow",
+ "liblz4",
"update_metadata-protos",
],
}
@@ -158,6 +162,7 @@
shared_libs: [
"android.hardware.health-V1-ndk", // from librecovery_utils
+ "android.hardware.boot-V1-ndk",
"librecovery_ui",
],
diff --git a/bootloader_message/Android.bp b/bootloader_message/Android.bp
index 778fdb9..7622677 100644
--- a/bootloader_message/Android.bp
+++ b/bootloader_message/Android.bp
@@ -45,6 +45,7 @@
"libbootloader_message_defaults",
],
recovery_available: true,
+ vendor_available: true,
host_supported: true,
target: {
diff --git a/bootloader_message/include/bootloader_message/bootloader_message.h b/bootloader_message/include/bootloader_message/bootloader_message.h
index d58158d..8fba101 100644
--- a/bootloader_message/include/bootloader_message/bootloader_message.h
+++ b/bootloader_message/include/bootloader_message/bootloader_message.h
@@ -109,6 +109,7 @@
#define MISC_MEMTAG_MODE_MEMTAG_ONCE 0x2
#define MISC_MEMTAG_MODE_MEMTAG_KERNEL 0x4
#define MISC_MEMTAG_MODE_MEMTAG_KERNEL_ONCE 0x8
+#define MISC_MEMTAG_MODE_MEMTAG_OFF 0x10
#if (__STDC_VERSION__ >= 201112L) || defined(__cplusplus)
static_assert(sizeof(struct misc_virtual_ab_message) == 64,
diff --git a/etc/init.rc b/etc/init.rc
index e4afecf..03df27b 100644
--- a/etc/init.rc
+++ b/etc/init.rc
@@ -102,7 +102,7 @@
on fs && property:sys.usb.configfs=1
mount configfs none /config
mkdir /config/usb_gadget/g1 0770 shell shell
- write /config/usb_gadget/g1/idVendor 0x18D1
+ write /config/usb_gadget/g1/idVendor 0x${ro.recovery.usb.vid}
mkdir /config/usb_gadget/g1/strings/0x409 0770
write /config/usb_gadget/g1/strings/0x409/serialnumber ${ro.serialno}
write /config/usb_gadget/g1/strings/0x409/manufacturer ${ro.product.manufacturer}
@@ -114,7 +114,7 @@
on fs && property:sys.usb.configfs=0
write /sys/class/android_usb/android0/f_ffs/aliases adb,fastboot
- write /sys/class/android_usb/android0/idVendor 18D1
+ write /sys/class/android_usb/android0/idVendor ${ro.recovery.usb.vid}
write /sys/class/android_usb/android0/iManufacturer ${ro.product.manufacturer}
write /sys/class/android_usb/android0/iProduct ${ro.product.model}
write /sys/class/android_usb/android0/iSerial ${ro.serialno}
@@ -139,19 +139,19 @@
setprop sys.usb.state ${sys.usb.config}
on property:sys.usb.config=adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/idProduct D001
+ write /sys/class/android_usb/android0/idProduct ${ro.recovery.usb.adb.pid}
write /sys/class/android_usb/android0/functions adb
write /sys/class/android_usb/android0/enable 1
setprop sys.usb.state ${sys.usb.config}
on property:sys.usb.config=sideload && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/idProduct D001
+ write /sys/class/android_usb/android0/idProduct ${ro.recovery.usb.adb.pid}
write /sys/class/android_usb/android0/functions adb
write /sys/class/android_usb/android0/enable 1
setprop sys.usb.state ${sys.usb.config}
on property:sys.usb.config=fastboot && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/idProduct 4EE0
+ write /sys/class/android_usb/android0/idProduct ${ro.recovery.usb.fastboot.pid}
write /sys/class/android_usb/android0/functions fastboot
write /sys/class/android_usb/android0/enable 1
setprop sys.usb.state ${sys.usb.config}
@@ -166,21 +166,21 @@
setprop sys.usb.state ${sys.usb.config}
on property:sys.usb.config=sideload && property:sys.usb.ffs.ready=1 && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idProduct 0xD001
+ write /config/usb_gadget/g1/idProduct 0x${ro.recovery.usb.adb.pid}
write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "adb"
symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f1
write /config/usb_gadget/g1/UDC ${sys.usb.controller}
setprop sys.usb.state ${sys.usb.config}
on property:sys.usb.config=adb && property:sys.usb.ffs.ready=1 && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idProduct 0xD001
+ write /config/usb_gadget/g1/idProduct 0x${ro.recovery.usb.adb.pid}
write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "adb"
symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f1
write /config/usb_gadget/g1/UDC ${sys.usb.controller}
setprop sys.usb.state ${sys.usb.config}
on property:sys.usb.config=fastboot && property:sys.usb.ffs.ready=1 && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idProduct 0x4EE0
+ write /config/usb_gadget/g1/idProduct 0x${ro.recovery.usb.fastboot.pid}
write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "fastboot"
symlink /config/usb_gadget/g1/functions/ffs.fastboot /config/usb_gadget/g1/configs/b.1/f1
write /config/usb_gadget/g1/UDC ${sys.usb.controller}
diff --git a/install/wipe_data.cpp b/install/wipe_data.cpp
index 024c1e1..c65e6f4 100644
--- a/install/wipe_data.cpp
+++ b/install/wipe_data.cpp
@@ -25,6 +25,7 @@
#include <android-base/logging.h>
#include <android-base/stringprintf.h>
+#include "bootloader_message/bootloader_message.h"
#include "install/snapshot_utils.h"
#include "otautil/dirutil.h"
#include "recovery_ui/ui.h"
@@ -100,6 +101,12 @@
success &= EraseVolume(METADATA_ROOT, ui);
}
}
+ ui->Print("Resetting memtag message...\n");
+ std::string err;
+ if (!WriteMiscMemtagMessage({}, &err)) {
+ ui->Print("Failed to reset memtag message: %s\n", err.c_str());
+ success = false;
+ }
if (success) {
success &= device->PostWipeData();
}
diff --git a/minadbd/OWNERS b/minadbd/OWNERS
new file mode 100644
index 0000000..8ee79dd
--- /dev/null
+++ b/minadbd/OWNERS
@@ -0,0 +1,2 @@
+enh@google.com
+shaju@google.com
diff --git a/minadbd/minadbd_services.cpp b/minadbd/minadbd_services.cpp
index 0abe867..16bcb5e 100644
--- a/minadbd/minadbd_services.cpp
+++ b/minadbd/minadbd_services.cpp
@@ -305,7 +305,7 @@
}
}
-asocket* daemon_service_to_socket(std::string_view) {
+asocket* daemon_service_to_socket(std::string_view, atransport*) {
return nullptr;
}
diff --git a/minui/graphics.cpp b/minui/graphics.cpp
index b24c2b1..41a3661 100644
--- a/minui/graphics.cpp
+++ b/minui/graphics.cpp
@@ -502,3 +502,7 @@
void gr_rotate(GRRotation rot) {
rotation = rot;
}
+
+bool gr_has_multiple_connectors() {
+ return gr_backend->HasMultipleConnectors();
+}
diff --git a/minui/graphics.h b/minui/graphics.h
index 5408c93..ff063ae 100644
--- a/minui/graphics.h
+++ b/minui/graphics.h
@@ -40,8 +40,11 @@
// Blank (or unblank) the specific screen.
virtual void Blank(bool blank, DrmConnector index) = 0;
+ // Return true if the device supports multiple connectors.
+ virtual bool HasMultipleConnectors() = 0;
+
// Device cleanup when drawing is done.
- virtual ~MinuiBackend() {};
+ virtual ~MinuiBackend() = default;
};
#endif // _GRAPHICS_H_
diff --git a/minui/graphics_drm.cpp b/minui/graphics_drm.cpp
index c557022..6c3a5bd 100644
--- a/minui/graphics_drm.cpp
+++ b/minui/graphics_drm.cpp
@@ -200,6 +200,10 @@
}
}
+bool MinuiBackendDrm::HasMultipleConnectors() {
+ return (drm[DRM_SEC].GRSurfaceDrms[0] && drm[DRM_SEC].GRSurfaceDrms[1]);
+}
+
static drmModeCrtc* find_crtc_for_connector(int fd, drmModeRes* resources,
drmModeConnector* connector) {
// Find the encoder. If we already have one, just use it.
diff --git a/minui/graphics_drm.h b/minui/graphics_drm.h
index fe3beaf..a8c9886 100644
--- a/minui/graphics_drm.h
+++ b/minui/graphics_drm.h
@@ -60,6 +60,7 @@
GRSurface* Flip() override;
void Blank(bool) override;
void Blank(bool blank, DrmConnector index) override;
+ bool HasMultipleConnectors() override;
private:
void DrmDisableCrtc(int drm_fd, drmModeCrtc* crtc);
diff --git a/minui/graphics_fbdev.cpp b/minui/graphics_fbdev.cpp
index 1cb0c0a..4a7d325 100644
--- a/minui/graphics_fbdev.cpp
+++ b/minui/graphics_fbdev.cpp
@@ -47,6 +47,11 @@
fprintf(stderr, "Unsupported multiple connectors, blank = %d, index = %d\n", blank, index);
}
+bool MinuiBackendFbdev::HasMultipleConnectors() {
+ fprintf(stderr, "Unsupported multiple connectors\n");
+ return false;
+}
+
void MinuiBackendFbdev::SetDisplayedFramebuffer(size_t n) {
if (n > 1 || !double_buffered) return;
diff --git a/minui/graphics_fbdev.h b/minui/graphics_fbdev.h
index 7e193c4..c772428 100644
--- a/minui/graphics_fbdev.h
+++ b/minui/graphics_fbdev.h
@@ -57,6 +57,7 @@
GRSurface* Flip() override;
void Blank(bool) override;
void Blank(bool blank, DrmConnector index) override;
+ bool HasMultipleConnectors() override;
private:
void SetDisplayedFramebuffer(size_t n);
diff --git a/minui/include/minui/minui.h b/minui/include/minui/minui.h
index f9be82f..2353ed3 100644
--- a/minui/include/minui/minui.h
+++ b/minui/include/minui/minui.h
@@ -129,6 +129,7 @@
void gr_flip();
void gr_fb_blank(bool blank);
void gr_fb_blank(bool blank, int index);
+bool gr_has_multiple_connectors();
// Clears entire surface to current color.
void gr_clear();
diff --git a/otautil/verifier.cpp b/otautil/verifier.cpp
index 8a65566..83ad708 100644
--- a/otautil/verifier.cpp
+++ b/otautil/verifier.cpp
@@ -309,13 +309,15 @@
}
static std::vector<Certificate> IterateZipEntriesAndSearchForKeys(const ZipArchiveHandle& handle) {
- void* cookie;
+ void* cookie{};
+
int32_t iter_status = StartIteration(handle, &cookie, "", "x509.pem");
if (iter_status != 0) {
LOG(ERROR) << "Failed to iterate over entries in the certificate zipfile: "
<< ErrorCodeString(iter_status);
return {};
}
+ std::unique_ptr<void, decltype(&EndIteration)> cookie_guard(cookie, &EndIteration);
std::vector<Certificate> result;
diff --git a/recovery-persist.cpp b/recovery-persist.cpp
index ad101ed..55699b2 100644
--- a/recovery-persist.cpp
+++ b/recovery-persist.cpp
@@ -77,6 +77,10 @@
}
}
+static bool file_exists(const char* filename) {
+ return access(filename, R_OK) == 0;
+}
+
static bool rotated = false;
ssize_t logsave(
@@ -141,7 +145,7 @@
if (has_cache) {
// Collects and reports the non-a/b update metrics from last_install; and removes the file
// to avoid duplicate report.
- if (access(LAST_INSTALL_FILE_IN_CACHE, F_OK) && unlink(LAST_INSTALL_FILE_IN_CACHE) == -1) {
+ if (file_exists(LAST_INSTALL_FILE_IN_CACHE) && unlink(LAST_INSTALL_FILE_IN_CACHE) == -1) {
PLOG(ERROR) << "Failed to unlink " << LAST_INSTALL_FILE_IN_CACHE;
}
@@ -152,9 +156,9 @@
}
}
- /* Is there something in pmsg? */
- if (access(LAST_PMSG_FILE, R_OK)) {
- return 0;
+ /* Is there something in pmsg? If not, no need to proceed. */
+ if (!file_exists(LAST_PMSG_FILE)) {
+ return 0;
}
// Take last pmsg file contents and send it off to the logsave
@@ -164,18 +168,18 @@
// For those device without /cache, the last_install file has been copied to
// /data/misc/recovery from pmsg. Looks for the sideload history only.
if (!has_cache) {
- if (access(LAST_INSTALL_FILE, F_OK) && unlink(LAST_INSTALL_FILE) == -1) {
+ if (file_exists(LAST_INSTALL_FILE) && unlink(LAST_INSTALL_FILE) == -1) {
PLOG(ERROR) << "Failed to unlink " << LAST_INSTALL_FILE;
}
}
/* Is there a last console log too? */
if (rotated) {
- if (!access(LAST_CONSOLE_FILE, R_OK)) {
- copy_file(LAST_CONSOLE_FILE, LAST_KMSG_FILE);
- } else if (!access(ALT_LAST_CONSOLE_FILE, R_OK)) {
- copy_file(ALT_LAST_CONSOLE_FILE, LAST_KMSG_FILE);
- }
+ if (file_exists(LAST_CONSOLE_FILE)) {
+ copy_file(LAST_CONSOLE_FILE, LAST_KMSG_FILE);
+ } else if (file_exists(ALT_LAST_CONSOLE_FILE)) {
+ copy_file(ALT_LAST_CONSOLE_FILE, LAST_KMSG_FILE);
+ }
}
return 0;
diff --git a/recovery_ui/include/recovery_ui/screen_ui.h b/recovery_ui/include/recovery_ui/screen_ui.h
index 92b3c25..99ad534 100644
--- a/recovery_ui/include/recovery_ui/screen_ui.h
+++ b/recovery_ui/include/recovery_ui/screen_ui.h
@@ -245,6 +245,9 @@
const std::vector<std::string>& backup_headers, const std::vector<std::string>& backup_items,
const std::function<int(int, bool)>& key_handler) override;
+ // For Lid switch handle
+ int SetSwCallback(int code, int value) override;
+
protected:
static constexpr int kMenuIndent = 4;
@@ -404,6 +407,9 @@
std::mutex updateMutex;
+ // Switch the display to active one after graphics is ready
+ bool is_graphics_available;
+
private:
void SetLocale(const std::string&);
diff --git a/recovery_ui/include/recovery_ui/stub_ui.h b/recovery_ui/include/recovery_ui/stub_ui.h
index 511b131..49689ba 100644
--- a/recovery_ui/include/recovery_ui/stub_ui.h
+++ b/recovery_ui/include/recovery_ui/stub_ui.h
@@ -80,6 +80,10 @@
}
void SetTitle(const std::vector<std::string>& /* lines */) override {}
+
+ int SetSwCallback(int /* code */, int /* value */) override {
+ return 0;
+ }
};
#endif // RECOVERY_STUB_UI_H
diff --git a/recovery_ui/include/recovery_ui/ui.h b/recovery_ui/include/recovery_ui/ui.h
index 512732f..c3e3ee2 100644
--- a/recovery_ui/include/recovery_ui/ui.h
+++ b/recovery_ui/include/recovery_ui/ui.h
@@ -231,6 +231,8 @@
bool InitScreensaver();
void SetScreensaverState(ScreensaverState state);
+ virtual int SetSwCallback(int code, int value) = 0;
+
// Key event input queue
std::mutex key_queue_mutex;
std::condition_variable key_queue_cond;
diff --git a/recovery_ui/screen_ui.cpp b/recovery_ui/screen_ui.cpp
index b2c828f..ee3cbb1 100644
--- a/recovery_ui/screen_ui.cpp
+++ b/recovery_ui/screen_ui.cpp
@@ -48,6 +48,11 @@
#include "recovery_ui/device.h"
#include "recovery_ui/ui.h"
+enum DirectRenderManager {
+ DRM_INNER,
+ DRM_OUTER,
+};
+
// Return the current time as a double (including fractions of a second).
static double now() {
struct timeval tv;
@@ -334,7 +339,8 @@
stage(-1),
max_stage(-1),
locale_(""),
- rtl_locale_(false) {}
+ rtl_locale_(false),
+ is_graphics_available(false) {}
ScreenRecoveryUI::~ScreenRecoveryUI() {
progress_thread_stopped_ = true;
@@ -906,6 +912,7 @@
if (!InitGraphics()) {
return false;
}
+ is_graphics_available = true;
if (!InitTextParams()) {
return false;
@@ -950,6 +957,9 @@
// Keep the progress bar updated, even when the process is otherwise busy.
progress_thread_ = std::thread(&ScreenRecoveryUI::ProgressThreadLoop, this);
+ // set the callback for hall sensor event
+ (void)ev_sync_sw_state([this](auto&& a, auto&& b) { return this->SetSwCallback(a, b);});
+
return true;
}
@@ -1367,3 +1377,45 @@
}
}
}
+
+int ScreenRecoveryUI::SetSwCallback(int code, int value) {
+ if (!is_graphics_available) { return -1; }
+ if (code > SW_MAX) { return -1; }
+ if (code != SW_LID) { return 0; }
+
+ /* detect dual display */
+ if (!gr_has_multiple_connectors()) { return -1; }
+
+ /* turn off all screen */
+ gr_fb_blank(true, DirectRenderManager::DRM_INNER);
+ gr_fb_blank(true, DirectRenderManager::DRM_OUTER);
+ gr_color(0, 0, 0, 255);
+ gr_clear();
+
+ /* turn on the screen */
+ gr_fb_blank(false, value);
+ gr_flip();
+
+ /* set the retation */
+ std::string rotation_str;
+ if (value == DirectRenderManager::DRM_OUTER) {
+ rotation_str =
+ android::base::GetProperty("ro.minui.second_rotation", "ROTATION_NONE");
+ } else {
+ rotation_str =
+ android::base::GetProperty("ro.minui.default_rotation", "ROTATION_NONE");
+ }
+
+ if (rotation_str == "ROTATION_RIGHT") {
+ gr_rotate(GRRotation::RIGHT);
+ } else if (rotation_str == "ROTATION_DOWN") {
+ gr_rotate(GRRotation::DOWN);
+ } else if (rotation_str == "ROTATION_LEFT") {
+ gr_rotate(GRRotation::LEFT);
+ } else { // "ROTATION_NONE" or unknown string
+ gr_rotate(GRRotation::NONE);
+ }
+ Redraw();
+
+ return 0;
+}
diff --git a/recovery_ui/ui.cpp b/recovery_ui/ui.cpp
index 6e67b1d..eb87f52 100644
--- a/recovery_ui/ui.cpp
+++ b/recovery_ui/ui.cpp
@@ -341,6 +341,11 @@
ProcessKey(ev.code, ev.value);
}
+ // For Lid switch handle
+ if (ev.type == EV_SW) {
+ SetSwCallback(ev.code, ev.value);
+ }
+
return 0;
}
diff --git a/update_verifier/Android.bp b/update_verifier/Android.bp
index 220b007..3c4ec4a 100644
--- a/update_verifier/Android.bp
+++ b/update_verifier/Android.bp
@@ -73,8 +73,13 @@
"libvold_binder",
],
+ whole_static_libs: [
+ "libsnapshot_snapuserd",
+ ],
+
shared_libs: [
"android.hardware.boot@1.0",
+ "libboot_control_client",
"libbase",
"libcutils",
"libbinder",
@@ -114,6 +119,7 @@
"libprotobuf-cpp-lite",
"libbinder",
"libutils",
+ "libboot_control_client",
],
init_rc: [
diff --git a/update_verifier/include/update_verifier/update_verifier.h b/update_verifier/include/update_verifier/update_verifier.h
index 4c64b1e..0cccc90 100644
--- a/update_verifier/include/update_verifier/update_verifier.h
+++ b/update_verifier/include/update_verifier/update_verifier.h
@@ -21,6 +21,7 @@
#include <string>
#include <vector>
+#include <snapuserd/snapuserd_client.h>
#include "otautil/rangeset.h"
// The update verifier performs verification upon the first boot to a new slot on A/B devices.
@@ -68,4 +69,8 @@
// The function to read the device property; default value: android::base::GetProperty()
std::function<std::string(const std::string&)> property_reader_;
+
+ // Check if snapuserd daemon has already completed the update verification
+ // Applicable only for VABC with userspace snapshots
+ bool CheckVerificationStatus();
};
diff --git a/update_verifier/update_verifier.cpp b/update_verifier/update_verifier.cpp
index a042f90..ea47a65 100644
--- a/update_verifier/update_verifier.cpp
+++ b/update_verifier/update_verifier.cpp
@@ -52,13 +52,14 @@
#include <future>
#include <thread>
+#include <BootControlClient.h>
+#include <android-base/chrono_utils.h>
#include <android-base/file.h>
#include <android-base/logging.h>
#include <android-base/parseint.h>
#include <android-base/properties.h>
#include <android-base/strings.h>
#include <android-base/unique_fd.h>
-#include <android/hardware/boot/1.0/IBootControl.h>
#include <android/os/IVold.h>
#include <binder/BinderService.h>
#include <binder/Status.h>
@@ -66,11 +67,6 @@
#include "care_map.pb.h"
-using android::sp;
-using android::hardware::boot::V1_0::IBootControl;
-using android::hardware::boot::V1_0::BoolResult;
-using android::hardware::boot::V1_0::CommandResult;
-
// TODO(xunchang) remove the prefix and use a default path instead.
constexpr const char* kDefaultCareMapPrefix = "/data/ota_package/care_map";
@@ -91,7 +87,7 @@
// partition's integrity.
std::map<std::string, std::string> UpdateVerifier::FindDmPartitions() {
static constexpr auto DM_PATH_PREFIX = "/sys/block/";
- dirent** namelist;
+ dirent** namelist = nullptr;
int n = scandir(DM_PATH_PREFIX, &namelist, dm_name_filter, alphasort);
if (n == -1) {
PLOG(ERROR) << "Failed to scan dir " << DM_PATH_PREFIX;
@@ -188,7 +184,28 @@
return ret;
}
+bool UpdateVerifier::CheckVerificationStatus() {
+ auto client =
+ android::snapshot::SnapuserdClient::Connect(android::snapshot::kSnapuserdSocket, 5s);
+ if (!client) {
+ LOG(ERROR) << "Unable to connect to snapuserd";
+ return false;
+ }
+
+ return client->QueryUpdateVerification();
+}
+
bool UpdateVerifier::VerifyPartitions() {
+ const bool userspace_snapshots =
+ android::base::GetBoolProperty("ro.virtual_ab.userspace.snapshots.enabled", false);
+
+ if (userspace_snapshots && CheckVerificationStatus()) {
+ LOG(INFO) << "Partitions verified by snapuserd daemon";
+ return true;
+ }
+
+ LOG(INFO) << "Partitions not verified by snapuserd daemon";
+
auto dm_block_devices = FindDmPartitions();
if (dm_block_devices.empty()) {
LOG(ERROR) << "No dm-enabled block device is found.";
@@ -307,18 +324,21 @@
LOG(INFO) << "Started with arg " << i << ": " << argv[i];
}
- sp<IBootControl> module = IBootControl::getService();
+ const auto module = android::hal::BootControlClient::WaitForService();
if (module == nullptr) {
LOG(ERROR) << "Error getting bootctrl module.";
return reboot_device();
}
- uint32_t current_slot = module->getCurrentSlot();
- BoolResult is_successful = module->isSlotMarkedSuccessful(current_slot);
- LOG(INFO) << "Booting slot " << current_slot << ": isSlotMarkedSuccessful="
- << static_cast<int32_t>(is_successful);
-
- if (is_successful == BoolResult::FALSE) {
+ uint32_t current_slot = module->GetCurrentSlot();
+ const auto is_successful = module->IsSlotMarkedSuccessful(current_slot);
+ if (!is_successful.has_value()) {
+ LOG(INFO) << "Booting slot " << current_slot << " failed";
+ } else {
+ LOG(INFO) << "Booting slot " << current_slot
+ << ": isSlotMarkedSuccessful=" << is_successful.value();
+ }
+ if (is_successful.has_value() && !is_successful.value()) {
// The current slot has not booted successfully.
bool skip_verification = false;
@@ -364,8 +384,7 @@
}
if (!supports_checkpoint) {
- CommandResult cr;
- module->markBootSuccessful([&cr](CommandResult result) { cr = result; });
+ const auto cr = module->MarkBootSuccessful();
if (!cr.success) {
LOG(ERROR) << "Error marking booted successfully: " << cr.errMsg;
return reboot_device();