turn recovery into a C++ binary
Change-Id: I68a67a4c8edec9a74463b3d4766005ce27b51316
diff --git a/install.cpp b/install.cpp
new file mode 100644
index 0000000..482e0d7
--- /dev/null
+++ b/install.cpp
@@ -0,0 +1,314 @@
+/*
+ * Copyright (C) 2007 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#include "common.h"
+#include "install.h"
+#include "mincrypt/rsa.h"
+#include "minui/minui.h"
+#include "minzip/SysUtil.h"
+#include "minzip/Zip.h"
+#include "mtdutils/mounts.h"
+#include "mtdutils/mtdutils.h"
+#include "roots.h"
+#include "verifier.h"
+#include "ui.h"
+
+#define ASSUMED_UPDATE_BINARY_NAME "META-INF/com/google/android/update-binary"
+#define PUBLIC_KEYS_FILE "/res/keys"
+
+// If the package contains an update binary, extract it and run it.
+static int
+try_update_binary(const char *path, ZipArchive *zip, int* wipe_cache) {
+ const ZipEntry* binary_entry =
+ mzFindZipEntry(zip, ASSUMED_UPDATE_BINARY_NAME);
+ if (binary_entry == NULL) {
+ mzCloseZipArchive(zip);
+ return INSTALL_CORRUPT;
+ }
+
+ const char* binary = "/tmp/update_binary";
+ unlink(binary);
+ int fd = creat(binary, 0755);
+ if (fd < 0) {
+ mzCloseZipArchive(zip);
+ LOGE("Can't make %s\n", binary);
+ return INSTALL_ERROR;
+ }
+ bool ok = mzExtractZipEntryToFile(zip, binary_entry, fd);
+ close(fd);
+ mzCloseZipArchive(zip);
+
+ if (!ok) {
+ LOGE("Can't copy %s\n", ASSUMED_UPDATE_BINARY_NAME);
+ return INSTALL_ERROR;
+ }
+
+ int pipefd[2];
+ pipe(pipefd);
+
+ // When executing the update binary contained in the package, the
+ // arguments passed are:
+ //
+ // - the version number for this interface
+ //
+ // - an fd to which the program can write in order to update the
+ // progress bar. The program can write single-line commands:
+ //
+ // progress <frac> <secs>
+ // fill up the next <frac> part of of the progress bar
+ // over <secs> seconds. If <secs> is zero, use
+ // set_progress commands to manually control the
+ // progress of this segment of the bar
+ //
+ // set_progress <frac>
+ // <frac> should be between 0.0 and 1.0; sets the
+ // progress bar within the segment defined by the most
+ // recent progress command.
+ //
+ // firmware <"hboot"|"radio"> <filename>
+ // arrange to install the contents of <filename> in the
+ // given partition on reboot.
+ //
+ // (API v2: <filename> may start with "PACKAGE:" to
+ // indicate taking a file from the OTA package.)
+ //
+ // (API v3: this command no longer exists.)
+ //
+ // ui_print <string>
+ // display <string> on the screen.
+ //
+ // - the name of the package zip file.
+ //
+
+ const char** args = (const char**)malloc(sizeof(char*) * 5);
+ args[0] = binary;
+ args[1] = EXPAND(RECOVERY_API_VERSION); // defined in Android.mk
+ char* temp = (char*)malloc(10);
+ sprintf(temp, "%d", pipefd[1]);
+ args[2] = temp;
+ args[3] = (char*)path;
+ args[4] = NULL;
+
+ pid_t pid = fork();
+ if (pid == 0) {
+ close(pipefd[0]);
+ execv(binary, (char* const*)args);
+ fprintf(stdout, "E:Can't run %s (%s)\n", binary, strerror(errno));
+ _exit(-1);
+ }
+ close(pipefd[1]);
+
+ *wipe_cache = 0;
+
+ char buffer[1024];
+ FILE* from_child = fdopen(pipefd[0], "r");
+ while (fgets(buffer, sizeof(buffer), from_child) != NULL) {
+ char* command = strtok(buffer, " \n");
+ if (command == NULL) {
+ continue;
+ } else if (strcmp(command, "progress") == 0) {
+ char* fraction_s = strtok(NULL, " \n");
+ char* seconds_s = strtok(NULL, " \n");
+
+ float fraction = strtof(fraction_s, NULL);
+ int seconds = strtol(seconds_s, NULL, 10);
+
+ ui_show_progress(fraction * (1-VERIFICATION_PROGRESS_FRACTION),
+ seconds);
+ } else if (strcmp(command, "set_progress") == 0) {
+ char* fraction_s = strtok(NULL, " \n");
+ float fraction = strtof(fraction_s, NULL);
+ ui_set_progress(fraction);
+ } else if (strcmp(command, "ui_print") == 0) {
+ char* str = strtok(NULL, "\n");
+ if (str) {
+ ui_print("%s", str);
+ } else {
+ ui_print("\n");
+ }
+ } else if (strcmp(command, "wipe_cache") == 0) {
+ *wipe_cache = 1;
+ } else {
+ LOGE("unknown command [%s]\n", command);
+ }
+ }
+ fclose(from_child);
+
+ int status;
+ waitpid(pid, &status, 0);
+ if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) {
+ LOGE("Error in %s\n(Status %d)\n", path, WEXITSTATUS(status));
+ return INSTALL_ERROR;
+ }
+
+ return INSTALL_SUCCESS;
+}
+
+// Reads a file containing one or more public keys as produced by
+// DumpPublicKey: this is an RSAPublicKey struct as it would appear
+// as a C source literal, eg:
+//
+// "{64,0xc926ad21,{1795090719,...,-695002876},{-857949815,...,1175080310}}"
+//
+// (Note that the braces and commas in this example are actual
+// characters the parser expects to find in the file; the ellipses
+// indicate more numbers omitted from this example.)
+//
+// The file may contain multiple keys in this format, separated by
+// commas. The last key must not be followed by a comma.
+//
+// Returns NULL if the file failed to parse, or if it contain zero keys.
+static RSAPublicKey*
+load_keys(const char* filename, int* numKeys) {
+ RSAPublicKey* out = NULL;
+ *numKeys = 0;
+
+ FILE* f = fopen(filename, "r");
+ if (f == NULL) {
+ LOGE("opening %s: %s\n", filename, strerror(errno));
+ goto exit;
+ }
+
+ {
+ int i;
+ bool done = false;
+ while (!done) {
+ ++*numKeys;
+ out = (RSAPublicKey*)realloc(out, *numKeys * sizeof(RSAPublicKey));
+ RSAPublicKey* key = out + (*numKeys - 1);
+ if (fscanf(f, " { %i , 0x%x , { %u",
+ &(key->len), &(key->n0inv), &(key->n[0])) != 3) {
+ goto exit;
+ }
+ if (key->len != RSANUMWORDS) {
+ LOGE("key length (%d) does not match expected size\n", key->len);
+ goto exit;
+ }
+ for (i = 1; i < key->len; ++i) {
+ if (fscanf(f, " , %u", &(key->n[i])) != 1) goto exit;
+ }
+ if (fscanf(f, " } , { %u", &(key->rr[0])) != 1) goto exit;
+ for (i = 1; i < key->len; ++i) {
+ if (fscanf(f, " , %u", &(key->rr[i])) != 1) goto exit;
+ }
+ fscanf(f, " } } ");
+
+ // if the line ends in a comma, this file has more keys.
+ switch (fgetc(f)) {
+ case ',':
+ // more keys to come.
+ break;
+
+ case EOF:
+ done = true;
+ break;
+
+ default:
+ LOGE("unexpected character between keys\n");
+ goto exit;
+ }
+ }
+ }
+
+ fclose(f);
+ return out;
+
+exit:
+ if (f) fclose(f);
+ free(out);
+ *numKeys = 0;
+ return NULL;
+}
+
+static int
+really_install_package(const char *path, int* wipe_cache)
+{
+ ui_set_background(BACKGROUND_ICON_INSTALLING);
+ ui_print("Finding update package...\n");
+ ui_show_indeterminate_progress();
+ LOGI("Update location: %s\n", path);
+
+ if (ensure_path_mounted(path) != 0) {
+ LOGE("Can't mount %s\n", path);
+ return INSTALL_CORRUPT;
+ }
+
+ ui_print("Opening update package...\n");
+
+ int numKeys;
+ RSAPublicKey* loadedKeys = load_keys(PUBLIC_KEYS_FILE, &numKeys);
+ if (loadedKeys == NULL) {
+ LOGE("Failed to load keys\n");
+ return INSTALL_CORRUPT;
+ }
+ LOGI("%d key(s) loaded from %s\n", numKeys, PUBLIC_KEYS_FILE);
+
+ // Give verification half the progress bar...
+ ui_print("Verifying update package...\n");
+ ui_show_progress(
+ VERIFICATION_PROGRESS_FRACTION,
+ VERIFICATION_PROGRESS_TIME);
+
+ int err;
+ err = verify_file(path, loadedKeys, numKeys);
+ free(loadedKeys);
+ LOGI("verify_file returned %d\n", err);
+ if (err != VERIFY_SUCCESS) {
+ LOGE("signature verification failed\n");
+ return INSTALL_CORRUPT;
+ }
+
+ /* Try to open the package.
+ */
+ ZipArchive zip;
+ err = mzOpenZipArchive(path, &zip);
+ if (err != 0) {
+ LOGE("Can't open %s\n(%s)\n", path, err != -1 ? strerror(err) : "bad");
+ return INSTALL_CORRUPT;
+ }
+
+ /* Verify and install the contents of the package.
+ */
+ ui_print("Installing update...\n");
+ return try_update_binary(path, &zip, wipe_cache);
+}
+
+int
+install_package(const char* path, int* wipe_cache, const char* install_file)
+{
+ FILE* install_log = fopen_path(install_file, "w");
+ if (install_log) {
+ fputs(path, install_log);
+ fputc('\n', install_log);
+ } else {
+ LOGE("failed to open last_install: %s\n", strerror(errno));
+ }
+ int result = really_install_package(path, wipe_cache);
+ if (install_log) {
+ fputc(result == INSTALL_SUCCESS ? '1' : '0', install_log);
+ fputc('\n', install_log);
+ fclose(install_log);
+ }
+ return result;
+}